Search

This investigation explores the fabrication of polymer matrix nanocomposites via additive manufacturing (AM), using a UV photopolymerization resin and copper nanoparticles (Cu-NPs) with vat photopolymerization 3D printing technology. The aim in this study is to investigate the mentioned materials in different formulations in terms of inexpensive processing, the property related variability, and targeting multifunctional applications. After the AM process, samples were post-cured with UV light in order to obtain better mechanical properties. The particles and resin were mixed using an ultrasonicator, and the particle contents used were 0.0, 0.5, and 1.0 wt %. The process used in this investigation was simple and inexpensive, as the technologies used are quite accessible, from the 3D printer to the UV curing device. These formulations were characterized with scanning electron microscopy (SEM) to observe the materials' microstructure and tensile tests to quantify stress–strain derived properties. Results showed that, besides the simplicity of the process, the mixing was effective, which was observed in the scanning electron microscope. Additionally, the tensile strength was increased with the UV irradiation exposure, while the strain properties did not change significantly. [ABSTRACT FROM AUTHOR]

The ever-increasing expansion of chemical industries produces a variety of common pollutants, including colors, which become a global and environmental problem. Using a nanocatalyst is one of the effective ways to reduce these organic contaminants. With this in mind, a straightforward and effective method for the production of a novel nanocatalyst based on lignin-derived carbon, titanium dioxide nanoparticles, and Ag particles (TiO2/C/Ag) is described. The preparation of carbon and Ag particles (in sub-micro and nano size) was carried out by laser ablation in air. The nanocomposite was synthesized using a facile magnetic stirrer of TiO2, C, and Ag. According to characterization methods, a carbon nanostructure was successfully synthesized through the laser irradiation of lignin. According to scanning electron microscope images, spherical Ag particles were agglomerated over the nanocomposite. The catalytic activities of the TiO2/C/Ag nanocomposite were tested for the decolorization of methylene blue (MB) and Congo red (CR), employing NaBH4 in a water-based solution at 25 °C. After adding fresh NaBH4 to the mixture of nanocomposite and dyes, both UV absorption peaks of MB and CR completely disappeared after 10 s and 4 min, respectively. The catalytic activity of the TiO2/C/Ag nanocomposite was also examined for the reduction of 4-nitrophenol (4-NP) using a NaBH4 reducing agent, suggesting the complete reduction of 4-NP to 4-aminophenol (4-AP) after 2.30 min. This shows excellent catalytic behavior of the prepared nanocomposite in the reduction of organic pollutants. [ABSTRACT FROM AUTHOR]

An ample amount of fruit waste is generated as agro-industrial waste, leading to significant nutritional, economic, and environmental challenges. Fruit peels are rich in many valuable bioactive compounds with the potential for developing nanoparticles. This study examined fresh juices of two citrus fruit peel wastes (Citrus sinensis: C. sinesis and Citrus limon: C. limon) for antioxidants and total protein. Then, we investigated their ability to produce silver nanoparticles, which were further analyzed for anti-microbial activity against thirteen pathogenic microbes. Both Citrus peel juices were rich in secondary metabolites. The formation of Ag nanoparticles was initially confirmed by UV-vis spectroscopy, with peaks at 400 nm for C. sinensis peel Ag nanoparticles and 430 nm for C. limon peel Ag nanoparticles. Further characterization was conducted using zeta sizer, zeta potential, Transmission Electron Microscopy (TEM), Scanning Electron Microscope (SEM), Energy-dispersive X-ray spectroscopy (EDX) and Fourier transform infrared (FTIR) spectroscopy. The antimicrobial activity was tested using the well diffusion method against 11 bacterial strains (five Gram-positive and six Gram-negative) and two fungal strains of Candida. TEM and SEM results revealed a spherical shape, with an average diameter of about 13 nm for C. sinensis and 21 nm for C. limon Ag. EDX confirmed the presence of silver in both nanoparticles. The FTIR spectrum of the extract indicated the presence of biomolecules, which facilitated the reduction and capping of the synthesized Ag nanoparticles. The prepared nanoparticles showed remarkable antimicrobial activity, but the nanoparticles from C. sinensis exhibited stronger antibacterial properties because of their smaller size. Citrus peel waste is a suitable medium for the eco-friendly production of silver nanoparticles. [ABSTRACT FROM AUTHOR]