Search

To achieve carbon neutrality quickly and deal with urban greenhouse effect, it is necessary to study the energy consumption of urban buildings. Energy consumption prediction is an important step in planning and managing energy use in buildings. At present, few studies have comprehensively considered the relationship between geometric features, functional types, location and energy use of buildings in urban built-up areas. In this paper, a spatial data-driven framework is introduced for the analysis and assessment of building energy consumption. The framework is grounded in the building centroid and is combined with single photon radar and point of interest data through the utilization of the nearest neighbor classification algorithm. Two megacities, Beijing and Shanghai, are taken as examples to illustrate the method and to generate the regional building energy use database. The results show that: a) building physical feature (geometric form, functional type) have a significant impact on energy consumption, and energy consumption is correlated with the economic level of the region; b) Energy use in urban built-up areas has obvious spatial agglomeration characteristics, and the siphon effect is obvious in region with high energy consumption. The contribution of the framework is to provide insights into the feasibility of employing multiple spatial data fusion for the analysis of energy consumption within urban built-up areas. This can be employed to address energy planning concerns and help promote sustainable environmental practices in urban areas worldwide. • This paper attempts to provide a feasible framework for analyzing urban building energy use by utilizing real-time urban semantic perception information and building features. • The proposed framework have comprehensively considered the relationship between geometric features, functional types, location and energy use of buildings. • The proposed methodology can obtain regional energy consumption stocks and produce spatial distribution results, thus improving the interpretability of the data. • The results show that energy use in urban built-up areas has obvious spatial agglomeration characteristics, and the siphoning effect is obvious in regions with high energy consumption. [ABSTRACT FROM AUTHOR]

Fuels within the immediate vicinity of a house (e.g., within 30–60 m), referred to as the 'home-ignition zone', are important determinants of structure damage during wildfires. Methods for mapping home-ignition zone fuels using earth observing satellites are lacking, limiting the capacity to quantify the spatial and temporal dynamics of urban fuel hazard and wildfire risk. Here, we (i) develop a methodology to map the fractional cover of five common fuel types (i.e., bare, buildings, herbaceous, woody and water cover) at the scale of the home-ignition zone (45 m radius area) using Landsat, Sentinel 1, and PALSAR imagery, and (ii) demonstrate that these maps improve prediction of house loss in wildfires in western Canada. A fractional cover database was created across thirteen cities via manual digitisation of aerial photos and used to train and validate random forest models consisting of combinations of Landsat, Sentinel 1 and PALSAR indices. The best models for the fractional cover of each fuel type explained most of the variation in the data (R2 = 0.66–0.96) and had high accuracy (Mean absolute error = 0.02–0.11) with low bias (Mean error = −0.005–0.008). The combination of optical (Landsat) and synthetic aperture radar (Sentinel 1 and/or PALSAR) improved model accuracy relative to models containing only multi-spectral indices. A house loss database was then derived for five major fires in western Canada and used to examine the effect of mapped fractional cover on house loss rates for 227 neighbourhood blocks. House loss rates were greater in blocks with a low amount of defensible space (i.e., areas of low fuel hazard; bare, herbaceous, or water cover) surrounding houses compared to those with extensive defensible space. This finding is consistent with house loss research globally and exposure assessment guidelines for communities in North America. Our fuel cover mapping methodology will facilitate improvements to models of house loss through the inclusion of important home-ignition zone fuel properties, allowing for spatially and temporally dynamic (i.e., annual) estimates of house loss likelihood and wildfire risk to communities. • Fuel fractional cover can be accurately mapped with Landsat, PALSAR and Sentinel 1. • Fusing optical and radar imagery improved the predictive accuracy of cover models. • PALSAR and Sentinel 1 help distinguish cover types with similar spectral signatures. • Fuel cover maps improved the prediction of house loss during fire events. [ABSTRACT FROM AUTHOR]

In the past years various methods have been developed to estimate high-resolution solar potential in urban areas, by simulating solar irradiance over surface models that originate from remote sensing data. In general, this requires discretisation of solar irradiance models that estimate direct, reflective, and diffuse irradiances. The latter is most accurately estimated by an anisotropic model, where the hemispherical sky dome from arbitrary surface's viewpoint consists of the horizon, the circumsolar and sky regions. Such model can be modified to incorporate the effects of shadowing from obstruction with a view factor for each sky region. However, state-of-the-art using such models for estimating solar potential in urban areas, only considers the sky view factor, and not circumsolar view factor, due to high computational load. In this paper, a novel parallelisation of solar potential estimation is proposed by using General Purpose computing on Graphics Processing Units (GPGPU). Modified anisotropic Perez model is used by considering diffuse shadowing with all three sky view factors. Moreover, we provide validation based on sensitivity analysis of the method's accuracy with independent meteorological measurements, by changing circumsolar sky region's half-angle and resolution of the hemispherical sky dome. Finally, the presented method using GPPGU was compared to multithreaded Central Processing Unit (CPU) approach, where on average a 70x computational speedup was achieved. Finally, the proposed method was applied over a ∼ 21 km 2 urban area, obtained from Light Detection And Ranging (LiDAR) data, where the computation of solar potential was performed in a reasonable time. • A new method for high-resolution solar potential estimation using GPGPU. • Novel incorporation of the modified Perez anisotropic diffuse irradiance model. • The method considers sky, circumsolar, and horizon view factors with shadowing. • In comparison to a multithreaded CPU approach, a 70x speedup can be achieved. [ABSTRACT FROM AUTHOR]

Atmospheric delay (AD) is the main source of error in time-series interferometric synthetic aperture radar (InSAR) deformation estimation over large areas. In this study, we propose a bidirectional gated recurrent unit (BiGRU) model to correct random and seasonal ADs adaptively. The BiGRU model decomposes InSAR time-series measurements into non-seasonal and seasonal components by adopting a branched network structure and extracting component-wise features separately. To remove seasonal ADs and meanwhile preserve true seasonal deformation, a dense and fully connected layer with weighted feature learning was designed. Five typical time-series deformation patterns were simulated for model training, and its robustness was evaluated using synthetic data. We applied the trained model to two city clusters in China (Guangdong and Jiangxi-Hunan) using 178 Sentinle-1 images. The results showed that BiGRU with moderate Generic Atmospheric Correction Online Service (GACOS) and spatiotemporal filtering (pGA_Fi_BiGRU) reduced the standard deviation of InSAR time-series measurements by 64.3% in the Guangdong region and by 53.5% in the Jiangxi-Hunan region compared with the raw data. Compared with the traditional combined GACOS and spatiotemporal filtering processing methods, the pGA_Fi_BiGRU improved the AD reduction performance by 4.7% and by 8.5% in Guangdong and Jiangxi-Hunan, respectively. The InSAR time-series deformation after pGA_Fi_BiGRU processing removed residual ADs and preserved true deformation, which agreed well with the geodetic leveling and Global Navigation Satellite System data. The first overall subsidence velocity of the Irrawaddy Delta city cluster in Myanmar was then mapped, followed by time-series deformation estimation using pGA_Fi_BiGRU. Representative time-series deformation due to groundwater extraction, coastal erosion, and accretion were properly derived, suggesting that the proposed model can be generalized to other city clusters with different atmospheric noise and geophysical dynamics. • Land subsidence of two city clusters was measured using Sentinel-1 images. • The pGA_Fi_BiGRU model was proposed to correct the seasonal ADs. • The performance enhancement in AD reduction varied across different cities. • Generalizability was demonstrated using the third city cluster. [ABSTRACT FROM AUTHOR]