17 results on '"Wang, Yiping"'
Search Results
2. Temperature-insensitive refractive index sensor based on in-fiber Michelson interferometer.
- Author
-
Li, Zhengyong, Wang, Yiping, Liao, Changrui, Liu, Shen, Zhou, Jiangtao, Zhong, Xiaoyong, Liu, Yingjie, Yang, Kaiming, Wang, Qiao, and Yin, Guolu
- Subjects
- *
TEMPERATURE effect , *REFRACTIVE index , *DETECTORS , *MICHELSON interferometer , *FABRICATION (Manufacturing) , *SENSITIVITY analysis - Abstract
Highlights: [•] We fabricated a refractive index sensor based on in-fiber Michelson interferometer. [•] The sensor has the advantages of short size (less than 2mm) and easy fabrication. [•] We use the method of intensity-modulated to solve cross sensitivity. [•] The sensor has the sensitivity of −208.24dB/RIU at the refractive index of 1.440. [•] The sensor could apply in the fields of chemical and biomedical sensing. [Copyright &y& Elsevier]
- Published
- 2014
- Full Text
- View/download PDF
3. Ultra-Broadband and Highly Efficient Beam Splitter Based on Quasi-Continuous Metasurface in the Near-Infrared Region.
- Author
-
Liu, Yan, Wu, Tiesheng, Wang, Yiping, Liu, Zhihui, Cao, Weiping, Yang, Dan, Yang, Zuning, Liu, Rui, Zhong, Xu, and Wang, Junyi
- Subjects
- *
BEAM splitters , *OPTICAL communications , *REFRACTIVE index , *PLANE wavefronts , *GALLIUM phosphide , *SURFACES (Technology) , *INTERFEROMETERS - Abstract
Beam splitters are vital components in several optical systems. It is highly desirable, and compact beam splitters with ultra-broadband performances, high efficiencies, and large split angles are still being sought. In this paper, we demonstrate and numerically investigate an ultra-broadband and highly efficient optical beam splitter based on a quasi-continuous metasurface. The proposed design is constructed of quasi-continuous triangle-shaped gallium phosphide nanoantennas on a silica substrate. The simple structure can achieve a conversion efficiency and an anomalous transmission intensity above 90% and 0.8 covering the wavelength range of 1537–1826 nm, respectively. The maximum beam split angle in the operating bandwidth reaches 131.84° at the wavelength of 1826 nm. Particularly, the operating bandwidth is still as high as 125 nm with the anomalous transmission intensity above 0.92 and the conversion efficiency exceeding 99%. Moreover, the results show that the performance of the metasurface-based optical beam splitter can be further enhanced by optimizing structural parameters. We also demonstrate the adjustability of the beam splitter by adding refractive index (RI) materials on the surface of the device. The results show that the incident plane wave can be divided into three beams with intensity adjustability. The presented metasurface is very promising in the fields of multiplexers, interferometers, and optical communications, owing to its advantages of ultra-broadband, highly efficient, and large split angle simultaneously. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
4. Suppressing Side‐Scattering on Laser‐Written Bragg Gratings for Back‐Reflection Engineering in Fibers.
- Author
-
Hu, Jiacheng, Wang, Yuying, Lau, Kuen Yao, Han, Xuhu, Firstov, Sergei, Zhong, Lijing, Wang, Yiping, and Qiu, Jianrong
- Subjects
- *
BRAGG gratings , *FIBER Bragg gratings , *FIBER lasers , *FIBERS , *OPTICAL fibers , *BACKSCATTERING , *REFRACTIVE index - Abstract
Laser direct writing (LDW) is versatile in structuring fibers with micro‐sized functional elements such as fiber Bragg grating (FBG) and backscattering centers by finely manipulating back and side scattering from laser‐induced refractive index modified (RIM) points. However, the side‐scattering is a lesser‐explored property in laser‐structured fibers. In this work, a concise physical model is established to understand the side‐scattering as a combined effect of microstructure and geometry of RIM points. Based on a single‐pulsed LDW method, the parametric decoupling between scattering loss (
α ) and coupling strength (κ ) coefficients of FBGs is reported, whose cross‐section is customized to have a flattened ellipse with thoroughly positive RIM, enabling controllable reflectivity from −21.33 dB to −0.0018 dB while maintaining narrow bandwidth and low loss. Exemplarily, a designed FBG realizes ultra‐low loss of 0.008 dB with a resonance attenuation of 10.81 dB, exhibiting a record‐breakingκ /α of 2083. Using this FBG as the high‐reflective mirror of a home‐made bismuth‐doped fiber laser, narrow‐band lasing with a high optical signal‐to‐noise ratio of ≈43 dB is achieved, demonstrating flexibilities of the proposed approach in customizing both back‐ and side‐scattering in fibers and opening up wide opportunities for combining multifunctional components into optical fibers and realizing all‐fiber networks. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
5. Highly Sensitive Balloon-like Fiber Interferometer Based on Ethanol Coated for Temperature Measurement.
- Author
-
Ding, Xin, Lin, Qiao, Liu, Shen, Zhang, Lianzhen, Chen, Nan, Zhang, Yuping, and Wang, Yiping
- Subjects
- *
TEMPERATURE measurements , *INTERFEROMETERS , *ETHANOL , *REFRACTIVE index , *FIBERS , *SURFACE coatings , *PLASTIC optical fibers , *SINGLE-mode optical fibers - Abstract
A highly sensitivity balloon-like fiber interferometer based on ethanol coating is presented in this paper. The Mach–Zehnder interferometer is formed by bending a single-mode fiber to a balloon-like structure and nested in the Teflon tube. Then, an ethanol solution was filled into the tube of the balloon-like fiber interferometer by the capillary effect. Due to the high sensitivity of the refractive index (RI) of ethanol solutions to temperature, when the external temperature varies, the optical path difference changes. The change in temperature can be detected by the shift in the interference spectrum. Limited by the size of the balloon-like structure, three kinds of these structures with different sensitive lengths were prepared to select the best parameters. The sensitive lengths were 10, 15 and 20 mm, respectively, and the RI detection performance of each structure in 10~26% NaCl solutions was investigated experimentally. The results show that when the sensitive length is 20 mm, the RI sensitivity of the sensor is the highest, which is 212.88 nm/RIU. Ultimately, the sensitive length filled with ethanol is 20 mm. The experimental results show that the temperature sensitivity of the structure is 1.145 nm/°C in the range of 28.1 °C~35 °C, which is 10.3 times higher than that of an unfilled balloon-like structure (0.111 nm/°C). The system has the advantages of low cost and easy fabrication, which can potentially be used in high-precision temperature monitoring processes. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
6. A Multi-Parameter Integrated Sensor Based on Selectively Filled D-Shaped Photonic Crystal Fiber.
- Author
-
Yang, Dan, Wu, Tiesheng, Wang, Yiping, Cao, Weiping, Zhang, Huixian, Liu, Zhihui, and Yang, Zuning
- Subjects
- *
PHOTONIC crystal fibers , *NEMATIC liquid crystals , *SURFACE plasmon resonance , *REFRACTIVE index , *MAGNETIC fluids , *FINITE element method - Abstract
We propose and numerically investigate a multi-parameter integrated sensor based on a selectively filled D-shaped photonic crystal fiber (PCF). The simple structure can be used to comprehensively detect refractive index, magnetic field, temperature, and voltage. According to the surface plasmon resonance and directional coupling effect, the PCF is coated with a gold nano-film to detect the refractive index of the external environment. In addition, magnetic fluid (water-based Fe3O4), toluene, and nematic liquid crystal (NLC E7) are selectively filled into different cladding air holes of the D-shaped PCF to realize the different sensing of the magnetic field, temperature, and voltage. The measurement of refractive index, magnetic field, temperature, and voltage are independent of each other, so these four parameters can be measured simultaneously. The sensing characteristics of the proposed structure are investigated systematically by the finite element method. The results show that the sensitivities of refractive index, magnetic field, temperature, and voltage are 4600 nm/RIU, 1.375 nm/Oe, 15.143 nm/°C, and 0.971 nm/V, respectively. The presented design based on materials selectively filled with D-shaped PCF might enable promising application in multi-parameter optical sensing. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
7. Distributed Refractive Index Sensing Based on Etched Ge-Doped SMF in Optical Frequency Domain Reflectometry.
- Author
-
Fu, Cailing, Sui, Ronglong, Peng, Zhenwei, Meng, Yanjie, Zhong, Huajian, Li, Mingquan, Yin, Xiaoyu, and Wang, Yiping
- Subjects
- *
REFRACTIVE index , *OPTICAL time-domain reflectometry , *REFLECTOMETRY , *SINGLE-mode optical fibers , *OPTICAL fibers , *HYDROFLUORIC acid , *SPATIAL resolution - Abstract
A distributed optical fiber refractive index sensor based on etched Ge-doped SMF in optical frequency domain reflection (OFDR) was proposed and demonstrated. The etched Ge-doped SMF was obtained by only using wet-etching, i.e., hydrofluoric acid solution. The distributed refractive index sensing is achieved by measuring the spectral shift of the local RBS spectra using OFDR. The sensing length of 10 cm and the spatial resolution of 5.25 mm are achieved in the experiment. The refractive index sensing range is as wide as 1.33–1.44 refractive index units (RIU), where the average sensitivity was about 757 GHz/RIU. Moreover, the maximum sensitivity of 2396.9 GHZ/RIU is obtained between 1.43 and 1.44 RIU. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
8. High-Sensitivity Optical Fiber-Based Glucose Sensor Using Helical Intermediate-Period Fiber Grating.
- Author
-
Zhong, Junlan, Liu, Shen, Zou, Tao, Yan, Wenqi, Chen, Peijing, Liu, Bonan, Sun, Zhongyuan, and Wang, Yiping
- Subjects
- *
GLUCOSE , *DETECTORS , *OPTICAL fiber detectors , *REFRACTIVE index , *INSERTION loss (Telecommunication) , *FIBERS - Abstract
An all-fiber glucose sensor is proposed and demonstrated based on a helical intermediate-period fiber grating (HIPFG) produced by using a hydrogen/oxygen flame heating method. The HIPFG, with a grating length of 1.7 cm and a period of 35 μm, presents four sets of double dips with low insertion losses and strong coupling strengths in the transmission spectrum. The HIPFG possesses an averaged refractive index (RI) sensitivity of 213.6 nm/RIU nm/RIU in the RI range of 1.33–1.36 and a highest RI sensitivity of 472 nm/RIU at RI of 1.395. In addition, the HIPFG is demonstrated with a low-temperature sensitivity of 3.67 pm/°C, which promises a self-temperature compensation in glucose detection. In the glucose-sensing test, the HIPFG sensor manifests a detection sensitivity of 0.026 nm/(mg/mL) and a limit of detection (LOD) of 1 mg/mL. Moreover, the HIPFG sensor exhibits good stability in 2 h, indicating its capacity for long-time detection. The properties of easy fabrication, high flexibility, insensitivity to temperature, and good stability of the proposed HIPFG endow it with a promising potential for long-term and compact biosensors. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
9. Characteristics of cladding index modulated fiber gratings for ambient refractive index sensing
- Author
-
Chen, Na, Yun, Binfeng, Wang, Yiping, and Cui, Yiping
- Subjects
- *
REFRACTIVE index , *OPTICAL fibers , *MAGNETIC coupling , *OPTICAL resonance , *DIFFRACTION gratings , *DETECTORS , *ENVIRONMENTAL monitoring - Abstract
Abstract: Characteristics of cladding index modulated fiber gratings for ambient refractive index sensing is studied in this paper. The modes propagation properties and coupling properties in cladding index modulated FBG are studied based on the classical coupling mode theory while considering interactions among multiple modes and developed on a three-layer step-index fiber geometry. Evolution of cladding mode resonance spectra of cladding index modulated FBG with the decreasing of fiber diameter is simulated and compared with the core grating. Sensing characteristics of cladding modes resonance of cladding index modulated FBG to the variation of ambient refractive index is detailed and emphasized for cladding modes resonances has a much narrower bandwidth. Results show that cladding index modulated fiber grating has better spectrum for ambient refractive index sensing applications under the same sensitivity with core index modulated fiber grating and may be applied to many field including biochemical sensing and environmental monitoring. [Copyright &y& Elsevier]
- Published
- 2009
- Full Text
- View/download PDF
10. Strain, torsion and refractive index sensors based on helical long period fibre grating inscribed in small-core fibre for structural condition monitoring.
- Author
-
Fu, Cailing, Ni, Yi-Qing, Sun, Tong, Wang, Yiping, Ding, Siqi, and Vidakovic, Miodrag
- Subjects
- *
BRAGG gratings , *STRUCTURAL health monitoring , *OPTICAL gratings , *REFRACTIVE index , *PLASTIC optical fibers , *TORSION , *FIBERS , *DETECTORS - Abstract
This study is intended to develop long period fibre grating sensors for potential applications in environmental and durability monitoring of coastal structures. High-quality helical long period fibre gratings (HLPFGs) are inscribed in different types of small-core single mode fibre (SMF) by use of hydrogen-oxygen flame heating technique. A detailed investigation of the effect of core diameter on their transmission spectrum and optimum length of the HLPFG has been pursued. A longer length is required to achieve the same coupling attenuation in a smaller-core SMF than that of a larger-core fibre. The strain, torsion and refractive index (RI) properties of the HLPFG is investigated experimentally to develop a high-sensitivity sensor. The experimental results show that the strain sensitivity could be enhanced by means of employing a larger-core diameter SMF. Moreover, the HLFPGs are also sensitive to the torsion and external RI. Hence, such HLFPGs have great potential for sensing applications. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
11. Optofluidic gutter oil discrimination based on a hybrid-waveguide coupler in fibre.
- Author
-
Lin, Chupao, Liao, Changrui, Zhang, Yunfang, Xu, Lei, Wang, Ying, Fu, Cailing, Yang, Kaiming, Wang, Jia, He, Jun, and Wang, Yiping
- Subjects
- *
OPTOFLUIDICS , *WAVEGUIDES , *FOOD safety , *FEMTOSECOND lasers , *REFRACTIVE index - Abstract
Discriminating edible oils from gutter oils has significance in food safety, as illegal gutter oils cannot meet a variety of criteria such as the acid value, peroxide value and quality. To discriminate these illegal cooking oils, we propose an ultrasensitive optofluidic detection method based on a hybrid-waveguide coupler. Prior to the straight waveguide inscription in the cladding of the silica tube using a femtosecond laser, a section of coreless fibre is firstly spliced with the ST to supply a platform for the inscription of an S-band waveguide. Then a pair of microfluidic channels are ablated on the ST using the fs laser to enable liquid analytes to flow in and out of the air channel. In the transmission spectrum, a unique resonant loss dip can be observed, which is produced by coupling the light from the laser inscribed waveguide to the liquid core when the phase-matching condition is met. This hybrid-waveguide coupler with a simplified structure realizes dynamic optofluidic refractive index sensing with an ultrahigh sensitivity of −112 743 nm RIU−1, a detection limit of 2.08 × 10−5 RIU and a refractive index detection range from 1.4591 to 1.4622. This novel method can be used for food safety detection, specifically, for the discrimination of gutter oils. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
12. Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber.
- Author
-
Zhao, Jing, Cao, Shaoqing, Liao, Changrui, Wang, Ying, Wang, Guanjun, Xu, Xizhen, Fu, Cailing, Xu, Guiwen, Lian, Jiarong, and Wang, Yiping
- Subjects
- *
SURFACE plasmon resonance , *OPTICAL fiber detectors , *SILVER compounds , *METAL coating , *REFRACTIVE index , *BIOCHEMISTRY - Abstract
We demonstrate a surface plasmon resonance refractive sensor based on the side-polished single mode optical fiber and investigated the sensor performance decay induced by silver coating degradation. The sensor showed fast response to the refractive index liquid in the range from 1.32 to 1.40 RIU. The highest sensitivity up to 4365.5 nm/RIU and a FOM of 51.61 RIU −1 were achieved, which were comparable to the reported polished-fiber-based SPR sensors. Characteristics of the silver-coated sensor after exposure to the air as well as to the liquid environment were investigated. The sensor always stored in dry air could respond stably two weeks later with sensitivity comparable with the fresh one and lower resolution due to the broadened resonant dip. But the sensor immersed in the refractive liquid for 30 min firstly and then exposed to ambient air for hours decayed dramatically due to silver degradation. The presented silver-coated SPR sensor could be used as a simple, cost-effective, disposable device in bio-chemical, environment, and food safety detection. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
13. Wearable breath monitoring based on a flexible fiber-optic humidity sensor.
- Author
-
Bao, Weijia, Chen, Fengyi, Lai, Huailei, Liu, Shen, and Wang, Yiping
- Subjects
- *
HUMIDITY , *FIBER Bragg gratings , *DYE-sensitized solar cells , *DETECTORS , *CARDIOVASCULAR diseases , *REFRACTIVE index , *TEMPERATURE effect - Abstract
Breath, as an important health monitoring indicator, provides valuable diagnostic information for cardiovascular disease and pulmonary function. Humidity can act as a bridge between breath and sensing signals. Current monitoring methods depend on humidity-sensitive material characteristics. In this work, an all fiber-optic flexible humidity sensor for wearable breath monitoring is reported. An eccentric fiber Bragg grating (EFBG) is inscribed in a single mode fiber to excite a stable core mode and sensitive cladding modes. The core mode is shown to maintain stable spectral features under a high-humidity atmosphere and can be used to calibrate the wavelength and power of the system. Importantly, the interface evanescent field of the cladding mode is highly sensitive to the ambient refractive index (RI) and even humidity-induced RI variation. Without combining any sensitized material, EFBG can directly perceive humidity fluctuations during breath with fast response (92 ms) and recovery times (100 ms). Different breathing patterns can be recognized, and breathing frequency can be extracted by sensor responses. The EFBG humidity sensor demonstrates great reproducibility, fast response, high flexibility, excellent robustness, and self-compensation capability, showing promising potential for wearable breath monitoring. • A novel all-fiber humidity sensor without any additional sensitive material is proposed for human breath monitoring. • The proposed sensor is successfully applied to monitor human breathing with different breathing pattern. • The proposed sensor offers self-compensation for source power fluctuation and temperature effect. • The long-term stability, reliability and reproducibility of proposed sensor are superior to most sensitized material based sensors. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
14. Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask.
- Author
-
Bao, Weijia, Liu, Shen, Feng, Wenjie, and Wang, Yiping
- Subjects
- *
FIBER Bragg gratings , *DIHEDRAL angles , *FEMTOSECOND lasers , *REFRACTIVE index , *FIBER lasers - Abstract
In this paper, we demonstrate a fiber Bragg grating (FBG) with a wide range and a comb with continuous cladding mode resonances inscribed in non-photosensitive single mode fibers using a femtosecond laser and a phase mask. The FBG is inscribed in the core and cladding, exciting a series of cladding modes in transmission. The birefringence induced by this FBG structure offers significant polarization-dependence for cladding modes, thus allowing the vector fiber twist to be perceived. By measuring the peak-to-peak differential intensity of orthogonally polarized cladding mode resonances, the proposed sensor presents totally opposite intensity response in the anticlockwise direction for the torsion angle ranging from −45° to 45°. The cladding mode comb approximately covers wavelengths over the O-, E-, S-, and C-bands in transmission. The cutoff cladding mode of air can be observed in the spectrum. Thus, the sensible refractive index range is estimated to be from 1.00 to 1.44. Temperature responsivity of the grating is also characterized. The proposed device potentially provides new solutions to the various challenges of physical vector and bio-chemical parameters sensing. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
15. Self-Imaging Effect in Liquid-Filled Hollow-Core Capillary Waveguide for Sensing Applications.
- Author
-
Huang, Yijian, Liu, Shuhui, Zhang, Lichao, Wang, Yiping, and Wang, Ying
- Subjects
- *
CHEMICAL detectors , *REFRACTIVE index , *PLASTIC optical fibers - Abstract
A high sensitivity fiber-optic sensor based on self-imaging effect in a hollow-core capillary waveguide (HCCW) is presented for sensing applications. The sensor is composed of a section of HCCW fusion spliced between single mode fibers (SMFs). The self-imaging effect in the HCCW is investigated with different fiber lengths and arc-fusion parameters. By infiltrating the hollow core with index matching liquids, the peak wavelength of the proposed device shifts towards longer wavelengths. The temperature and refractive index (RI) responses of the sensor are studied systematically. When temperature is increased from 25 °C to 75 °C, the temperature sensitivity of the device can be improved significantly with the infiltrated structure, and reaches −0.49 nm/°C, compared with that of the un-filled device, which is 9.8 pm/°C. For the RI response, the liquid-filled structure achieves sensitivity of 12,005 nm/RIU in the range between 1.448 and 1.450, slightly higher than the 11,920 nm/RIU achieved by the un-filled one. The proposed sensor exhibits the advantages of simple structure, high sensitivity and low cost, which may find potential applications in physical and chemical sensing. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
16. Temperature Sensor Based on Side-Polished Fiber SPR Device Coated with Polymer.
- Author
-
Liu, Shuhui, Cao, Shaoqing, Zhang, Zhe, Wang, Ying, Liao, Changrui, and Wang, Yiping
- Subjects
- *
TEMPERATURE sensors , *OPTICAL fiber detectors , *SURFACE plasmon resonance , *PLASTIC optical fibers , *GOLD films , *REFRACTIVE index , *GOLD coatings - Abstract
A highly sensitive temperature sensor based on surface plasmon resonance (SPR) of a side-polished single mode fiber is demonstrated. The sensor consists of a gold film coated side-polished fiber covered by a layer of UV-curable adhesive. Before introducing the UV-curable adhesive, the gold-coated fiber exhibits refractive index (RI) sensitivity of 1691.6 nm/RIU to 8800 nm/RIU in the range of 1.32 to 1.43. The resonant wavelength of the SPR sensor shifts to 650 nm when the adhesive is coated on the gold film, and is fixed at about 725 nm when the adhesive is cured. Due to the high thermo-optic and thermal expansion coefficient of the adhesive, the sensor structure achieves a temperature sensitivity of −0.978 nm/°C between 25 °C and 100 °C. The proposed optical fiber SPR sensor is simple, highly sensitive and cost effective, which may find potential applications for temperature measurements in the biomedical and environmental industries. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
17. Optical manipulation of microparticles with a fiber tip containing a hollow cavity.
- Author
-
Ni, Xiaoqi, Wang, Ming, Wang, Ri, Huang, Yan, Wang, Yiping, and Guo, Dongmei
- Subjects
- *
OPTICAL properties , *NANOPARTICLES , *OPTICAL fibers , *ELECTRIC fields , *REFRACTIVE index , *MICROFLUIDIC devices - Abstract
Optical manipulation is a non-contact and non-destructive method to capture and manipulate micro/nano particles, biological macromolecules and cells with application of optical forces. With the rapid development of optical manipulation, various kinds of optical fiber tips have been presented and demonstrated in recent years. In this letter, a novel structure of optical fiber tip with an imbedded hollow cavity is presented. The electric field distribution of the fiber tip and the influence of cavity geometry are simulated with finite-difference time-domain method. The unique advantage is that the electric field intensity will be significantly enhanced when the fiber tip is filled with high refractive index medium in the cavity, which brings the potential to generate a three-dimensional optical trap for particles. Through experiments, we also demonstrate that the velocity of the particles driven by the optical force has a quadratic relationship with the laser power. The relationship can be used in microfluidic technology to measure the velocity of micro fluid. And the balance between the scattering force and the fluid force can be used to study non-invasive migration of particles. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.