Search

In the current context of joint efforts towards the decarbonisation of buildings, integrating occupants' comfort and health with latest technological advancements for energy efficiency is at the center of the latest development of research, policies and professional practice. Radiant systems are encountering great success since the low-thickness systems can also be used in renovation projects for both heating and cooling, while guaranteeing optimal comfort. However, dehumidification is often required for optimal radiant cooling operation with no condensation risks, and the great potential of mechanical ventilation systems to optimally address the needs for dehumidification, air renewal, health and energy efficiency appears to be far from its full exploitation in the post-COVID-19 era. The present paper aims at providing a quantification of the energy and financial impacts of the implementation of a controlled mechanical ventilation system (CMV) coupled to a radiant system in a typical residential case study building in Italy. The results show that the sole CMV may decrease primary energy demand and energy costs by more than 30% and contribute to an increase in the smart readiness of the building by 8%, but further incentive policies must be developed to cover the still high investment and maintenance cost. [ABSTRACT FROM AUTHOR]

Energy retrofitting of residential buildings is considered a challenge to be tackled not only at building level, but also at urban scale, to give a stronger impulse for a concrete transition towards climate neutrality. This paper presents an easy-to-use analysis method based on the elaboration and scaling-up of data collected through the energy performance certificates (EPCs) to identify different urban energy zones distinguished by their energy performance index. This method is therefore conceived for better informing urban planning decisions, thus boosting more effective energy-sensitive urban planning strategies and eventually to foresee dedicated financial instruments to act in the more energy demanding areas of the city, establishing priorities for integrated strategies. This analytical method has been applied and tested in one municipality in the Emilia-Romagna region, Italy, where the recent urban planning law is pushing municipalities towards the development of urban planning strategies oriented to drastically improve the energy efficiency of the existing building stock. Results show that only a small number of areas manage to reach a good performance with fairly low levels of energy performance index, with the most critical situation found in the most central areas of the capital and in the hamlets. • Easy-to-use method for assessing energy performance of residential building at urban scale is proposed • Method based on data easily available for local authorities, like energy performance certificates (EPCs) and urban morphology • The method supports urban planners in municipalities in taking more targeted decisions for improving energy efficiency • The main output of the method is the definition of an energy performance index (EPI) for different urban contexts • EPI allows to wisely balance economic incentives, identifying areas where multi-purpose interventions are recommended [ABSTRACT FROM AUTHOR]

• The energy performances of solar-assisted HP for DHW for DHW are studied. • Configuration of HP equipped with PV and PVT panels are investigated. • Solar systems sized to serve small aggregates are studied. • The energy consumption is mainly influenced by the required DHW demand per day. • PVT thermal contribution slightly influences the system performances. The paper investigates the energy performances of several configurations of solar-assisted heat pumps equipped with photovoltaic (PV) and photovoltaic-thermal (PVT) panels as well as solar thermal collectors for domestic hot water production. The systems are sized to serve small aggregates of users assumed as micro energy communities in low housing density context in the South of Italy. Electricity storages are also considered to smooth the interaction with the electric grid. Several indices are defined and calculated to guide toward a correct sizing, to check users' satisfaction and to assess primary energy savings. The results show how the energy consumption from the analysed systems is mainly influenced by the amount and structure of domestic hot water demand per day. Also, according to the chosen plant layouts, it is shown that thermal contribution of PVT slightly influences the system performances. Better results in terms of less non-renewable primary energy consumption are recorded for the PV-based plant. Solar thermal collectors, even if sized for high solar fractions, do not properly support the daily heat pump operation, especially in winter, and present a certain electricity consumption for auxiliaries which results to be penalizing. Additional calculations were performed for the case of energy communities in a context with higher uses of non-renewable energy for electricity generation. Finally, opportunities to support demand-response actions for grid electricity management were investigated. [ABSTRACT FROM AUTHOR]

One of the most common demand side management programs consists of time-of-use (TOU) tariffs, where consumers are charged differently depending on the time of the day when they make use of energy services. This paper assesses the impacts of TOU tariffs on a dataset of residential users from the Province of Trento in Northern Italy in terms of changes in electricity demand, price savings, peak load shifting and peak electricity demand at sub-station level. Findings highlight that TOU tariffs bring about higher average electricity consumption and lower payments by consumers. A significant level of load shifting takes place for morning peaks. However, issues with evening peaks are not resolved. Finally, TOU tariffs lead to increases in electricity demand for substations at peak time. [ABSTRACT FROM AUTHOR]

This paper presents an energy analysis of the school buildings of a province in central Italy. The analysis is aimed at calculating the main thermal and electric energy consumption indexes to determine the status of energy consumption and the possible intervention to save energy in the school sector. Two applications of energy auditing to school buildings are also presented.It is also shown that if the optimal energy consumption indexes could be valid for all the school buildings, thermal energy savings could reach 38% and electric energy consumptions could be reduced by over 46%. [Copyright &y& Elsevier]

• Electricity and electrification is a viable solution for the energy transition. • Electricity triangle assures a consistent framework for the energy transition. • Multifaceted benefits: energetic, environmental and socio-economic. • Conceptualization of a set of metrics for impact assessment. • A real case study (Italy) considering its evolution up to 2050. Greenhouse gases along with pollution generated by the present energy paradigm widely based on fossil fuels are providing large impacts in terms of climate change and the health of human and biological systems at large. A shift in the energy paradigm, from fossil fuels to renewable energy, is urgently needed for nature and society. This is what we refer to as the energy transition. An old commodity – electricity – can play a new key role in the energy transition. That can happen through what we call the electricity triangle involving electricity generation from Renewable Energy Sources, exploitation of electricity as the main energy vector, and electrification of the final energy uses in all sectors. The possible deployment of the electricity triangle must be carefully assessed in all its possible implications, from technological, economic, societal and environmental perspectives. In this paper, we conceptualize the electricity triangle as a viable approach to the energy transition, and we propose a set of holistic metrics to assess its possible impacts. We apply the electricity triangle framework to the case of Italy based on sectorial studies on RES generation and electrification in building, industry and transport sectors. Our results indicate that Italy in 2050 has the potential to achieve 85.6% penetration of RES in its electricity supply, while 41%, 53% and 42% of the energy consumptions in transport, residential, and industry sectors will be electrified. Ultimately, this would lead to a 68% reduction in CO 2 emissions compared to current levels. [ABSTRACT FROM AUTHOR]