Search

(1) Background: Many drugs possess poor bioavailability, and many strategies are available to overcome this issue. In this study, smartFilm technology, i.e., a porous cellulose matrix (paper), in which the active compound can be loaded onto in an amorphous state was utilised for oral administration to improve the solubility and bioactivity of a poorly soluble BSC class IV antibiotic. (2) Methods: Norfloxacin was used as the model drug and loaded into commercially available paper. The resulting norfloxacin-loaded smartFilms were transformed into smartFilm granules via wet granulation and the resulting norfloxacin-loaded smartFilm granules were transformed into norfloxacin-loaded tablets made from paper, i.e., smartFilm tablets. The crystalline state of norfloxacin was investigated, as well as the pharmaceutical properties of the granules and the tablets. The bioactivity of the smartFilm tablets was assessed in vitro and ex vivo to determine the antibacterial activity of norfloxacin. The results were compared to a physical mixture tablet that contained non-loaded paper granules and equal amounts of norfloxacin as a crystalline powder. (3) Results: Norfloxacin-loaded smartFilm granules and norfloxacin-loaded smartFilm tablets contained norfloxacin in an amorphous state, which resulted in an improved and faster release of norfloxacin when compared to the physical mixture tablet. The bioactivity was up to three times higher when compared to the physical mixture tablet. The ex vivo model was demonstrated to be a useful tool that allows for a fast and cost-effective discrimination between "good" and "bad" formulations. It provides realistic physiological conditions and can therefore yield meaningful, additional biopharmaceutical information that cannot be assessed in classical in vitro experiments. (4) Conclusions: smartFilm tablets are a promising, universal, industrially feasible and cost-effective formulation strategy for improved solubility and enhanced bioactivity of poorly soluble drugs. [ABSTRACT FROM AUTHOR]

Improved global access to novel age‐appropriate formulations for paediatric subsets, either of new chemical entities or existing drugs, is a priority to ensure that medicines meet the needs of these patients. However, despite regulatory incentives, the introduction to the market of paediatric formulations still lags behind adult products. This is mainly caused by additional complexities associated with the development of acceptable age‐appropriate paediatric medicines. This position paper recommends the use of a paediatric Quality Target Product Profile as an efficient tool to facilitate early planning and decision making across all teams involved in paediatric formulation development during the children‐centric formulation design for new chemical entities, or to repurpose/reformulate off‐patent drugs. Essential key attributes of a paediatric formulation are suggested and described. Moreover, greater collaboration between formulation experts and clinical colleagues, including healthcare professionals, is advocated to lead to safe and effective, age‐appropriate medicinal products. Acceptability testing should be a secondary endpoint in paediatric clinical trials to ensure postmarketing adherence is not compromised by a lack of acceptability. Not knowing the indications and the related age groups and potential dosing regimens early enough is still a major hurdle for efficient paediatric formulation development; however, the proposed paediatric Quality Target Product Profile could be a valuable collaborative tool for planning and decision making to expedite paediatric product development, particularly for those with limited experience in developing a paediatric product. [ABSTRACT FROM AUTHOR]

Paper‐based electronics are emerging as a new class of technology with broad areas of application. Despite several efforts to fabricate new types of flexible electronic devices by screen printing of conductive paste, many of them are often nonbiodegradable, toxic, and expensive, limiting their practical use in bioresorbable paper‐based electronics. To address this need, a highly conductive and biodegradable bimodal conductive paste is developed using cost‐effective zinc‐based micro and nanoparticles with a facile low‐temperature sintering process compatible with paper substrates. The two‐step sintering process involves the removal of the insulating zinc oxide layer by spray coating acetic acid followed by a heat press sintering process to ensure the formation of highly packed and continuous metallic traces. The required conditions for the heat press sintering process are systematically studied using electrical, optical, and mechanical characterization techniques. The results of these investigations revealed an ultra‐packed microstructure with high electrical conductivity (0.5 × 105 S m−1) and low oxide content that is obtained with a heat press sintering setting of 220 °C for 60 s. Finally, as a proof of concept, the conductive paste with an optimized sintering process is used to fabricate a wearable wireless heater for remote‐controlled release of therapeutics. The controlled delivery of the system is validated in the practical and on‐demand delivery of antibiotics for eradicating commonly found bacteria such as Staphylococcus aureus in dermal wound infections. The biocompatibility of all the materials and manufacturing process is validated by NIH/3T3 fibroblast cells via MTT assay and live/dead staining. [ABSTRACT FROM AUTHOR]

Older people are often affected by impaired organ and bodily functions resulting in multimorbidity and polypharmacy, turning them into the main user group of many medicines. Very often, medicines have not specifically been developed for older people, causing practical medication problems for them like limited availability of easy to swallow formulations, easy to open packaging and dosing instructions for enteral administration. In 2020, the European Medicines Agency (EMA) published a reflection paper 'Pharmaceutical development of medicines for use in the older population', which discusses how the emerging needs of an ageing European population can be addressed by medicines regulation. The paper intends to help industry to better consider the needs of older people during pharmaceutical/clinical medicines development by summarising data on the most relevant topics, providing early suggestions on how to move forward and prompting expert discussions and studies into knowledge gaps. Topics include patient acceptability, (dis)advantages of an administration route, formulation, dosage form, packaging, dosing device and user instruction. While the paper is directed at older people and the pharmaceutical industry, the reflections are also relevant to younger patients with similar disease‐related needs and of value to other stakeholders parties, e.g., healthcare professionals, academics, patients and caregivers, as the paper makes clear what can be expected from industry and where collaborative work is needed. This commentary provides an overview of the different steps in the development of the reflection paper, discusses points considered most controversial and/or subject to (multidisciplinary) expert discussions and indicates their value for real world clinical practice. [ABSTRACT FROM AUTHOR]

Paper is a common material that is promising for constructing microfluidic chips (lab-on-a-paper) for diagnostics and drug delivery for biomedical applications. In the past decade, extensive research on paper-based microfluidics has accumulated a large number of scientific publications in the fields of biomedical diagnosis, food safety, environmental health, drug screening and delivery. This review focuses on the recent progress on paper-based microfluidic technology with an emphasis on the design, optimization and application of the technology platform, in particular for medical diagnostics and drug delivery. Novel advances have concentrated on engineering paper devices for point-of-care (POC) diagnostics, which could be integrated with nucleic acid-based tests and isothermal amplification experiments, enabling rapid sample-to-answer assays for field testing. Among the isothermal amplification experiments, loop-mediated isothermal amplification (LAMP), an extremely sensitive nucleic acid test, specifically identifies ultralow concentrations of DNA/RNA from practical samples for diagnosing diseases. We thus mainly focus on the paper device-based LAMP assay for the rapid infectious disease diagnosis, foodborne pathogen analysis, veterinary diagnosis, plant diagnosis, and environmental public health evaluation. We also outlined progress on paper microfluidic devices for drug delivery. The paper concludes with a discussion on the challenges of this technology and our insights into how to advance science and technology towards the development of fully functional paper devices in diagnostics and drug delivery. Unlabelled Image [ABSTRACT FROM AUTHOR]

Paper devices have many advantages over other microfluidic devices. The paper substrate, from cellulose to glass fiber, is an inexpensive substrate that can be readily modified to suit a variety of applications. Milli- to micro-scale patterns can be designed to create a fast, cost-effective device that uses small amounts of reagents and samples. Finally, well-established chemical and biological methods can be adapted to paper to yield a portable device that can be used in resource-limited areas (e.g., field work). Altogether, the paper devices have grown into reliable analytical devices for screening low quality pharmaceuticals. This review article presents fabrication processes, detection techniques, and applications of paper microfluidic devices toward pharmaceutical screening. [ABSTRACT FROM AUTHOR]

Cystic Fibrosis (CF) is a life-shortening, genetic disease that affects approximately 145,000 people worldwide. CF causes a dehydrated mucus layer in the lungs, leading to damaging infection and inflammation that eventually result in death. Nanoparticles (NPs), drug delivery vehicles intended for inhalation, have become a recent source of interest for treating CF and CF-related conditions, and many formulations have been created thus far. This paper is intended to provide an overview of CF and the effect it has on the lungs, the barriers in using NP drug delivery vehicles for treatment, and three common material class choices for these NP formulations: metals, polymers, and lipids. The materials to be discussed include gold, silver, and iron oxide metallic NPs; polyethylene glycol, chitosan, poly lactic-co-glycolic acid, and alginate polymeric NPs; and lipid-based NPs. The novelty of this review comes from a less specific focus on nanoparticle examples, with the focus instead being on the general theory behind material function, why or how a material might be used, and how it may be preferable to other materials used in treating CF. Finally, this paper ends with a short discussion of the two FDA-approved NPs for treatment of CF-related conditions and a recommendation for the future usage of NPs in people with Cystic Fibrosis (pwCF). [ABSTRACT FROM AUTHOR]

This paper explores the latest advancements in aerogel technology for antimicrobial therapy, revealing their interesting capacity that could improve the current medical approaches for antimicrobial treatments. Aerogels are attractive matrices because they can have an antimicrobial effect on their own, but they can also provide efficient delivery of antimicrobial compounds. Their interesting properties, such as high porosity, ultra-lightweight, and large surface area, make them suitable for such applications. The fundamentals of aerogels and mechanisms of action are discussed. The paper also highlights aerogels' importance in addressing current pressing challenges related to infection management, like the limited drug delivery alternatives and growing resistance to antimicrobial agents. It also covers the potential applications of aerogels in antimicrobial therapy and their possible limitations. [ABSTRACT FROM AUTHOR]

In recent years, polymer-supported magnetic iron oxide nanoparticles (MIO-NPs) have gained a lot of attention in biomedical and healthcare applications due to their unique magnetic properties, low toxicity, cost-effectiveness, biocompatibility, and biodegradability. In this study, waste tissue papers (WTP) and sugarcane bagasse (SCB) were utilized to prepare magnetic iron oxide (MIO)-incorporated WTP/MIO and SCB/MIO nanocomposite particles (NCPs) based on in situ co-precipitation methods, and they were characterized using advanced spectroscopic techniques. In addition, their anti-oxidant and drug-delivery properties were investigated. Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) analyses revealed that the shapes of the MIO-NPs, SCB/MIO-NCPs, and WTP/MIO-NCPs were agglomerated and irregularly spherical with a crystallite size of 12.38 nm, 10.85 nm, and 11.47 nm, respectively. Vibrational sample magnetometry (VSM) analysis showed that both the NPs and the NCPs were paramagnetic. The free radical scavenging assay ascertained that the WTP/MIO-NCPs, SCB/MIO-NCPs, and MIO-NPs exhibited almost negligible antioxidant activity in comparison to ascorbic acid. The swelling capacities of the SCB/MIO-NCPs and WTP/MIO-NCPs were 155.0% and 159.5%, respectively, which were much higher than the swelling efficiencies of cellulose-SCB (58.3%) and cellulose-WTP (61.6%). The order of metronidazole drug loading after 3 days was: cellulose-SCB < cellulose-WTP < MIO-NPs < SCB/MIO-NCPs < WTP/MIO-NCPs, whereas the sequence of the drug-releasing rate after 240 min was: WTP/MIO-NCPs < SCB/MIO-NCPs < MIO-NPs < cellulose-WTP < cellulose-SCB. Overall, the results of this study showed that the incorporation of MIO-NPs in the cellulose matrix increased the swelling capacity, drug-loading capacity, and drug-releasing time. Therefore, cellulose/MIO-NCPs obtained from waste materials such as SCB and WTP can be used as a potential vehicle for medical applications, especially in a metronidazole drug delivery system. [ABSTRACT FROM AUTHOR]

Virus-like particles (VLPs) are nanoparticles that are self-assembled from one or more structural proteins, which can be arranged in several layers or contain a lipid outer membrane. Due to the lack of genetic material, VLPs cannot infect host cells, but are highly immunogenic and can induce immune responses different from conventional inactivated vaccines. VLPs can be produced using a variety of systems including bacterial, yeast, plant, insect and mammalian cells. Compared with traditional vaccines, VLPs have incomparable advantages, so they are becoming more and more popular in the biomedical field. To date, a series of vaccine candidates based on VLPs have been developed for immunization and prevention of various infectious diseases. At the same time, the recent successful application of VLPs in targeted drug delivery and gene therapy has attracted attention. This paper mainly reviews the commonly used expression systems of VLPs and the research progress of their applications. [ABSTRACT FROM AUTHOR]

Since sarcopenia is a progressive condition that leads to decreased muscle mass and function, especially in elderly people, it is a public health problem that requires attention from researchers. This review aims to highlight drug delivery systems that have a high and efficient therapeutic potential for sarcopenia. Current as well as future research needs to consider the barriers encountered in the realization of delivery systems, such as the route of administration, the interaction of the systems with the aggressive environment of the human body, the efficient delivery and loading of the systems with therapeutic agents, and the targeted delivery of therapeutic agents into the muscle tissue without creating undesirable adverse effects. Thus, this paper sets the framework of existing drug delivery possibilities for the treatment of sarcopenia, serving as an inception point for future interdisciplinary studies. [ABSTRACT FROM AUTHOR]

Context: Myocardial infarction is one of the major health challenges. It is of great significance to develop potential delivery carriers for new anti-myocardial infarction drugs. In this paper, based on first-principles calculations, monolayer WS2 with excellent photoelectric properties was verified as a carrier for the anti-myocardial infarction drug amiodarone (AMD). Studies have shown that the WS2-adsorbed AMD system (WS2@AMD) maintains structural stability and produces an adsorption energy of—2.12 eV. Mulliken charge analysis shows that electrons are transferred from WS2 atoms to AMD atoms. Among them, C, N and O obtained the maximum values of 0.51,0.37 and 0.56 e electrons, respectively, while H and I lost the maximum values of 0.32 and 0.24 e electrons, respectively. The optical response of WS2 adsorbed AMD system is similar to that of WS2. The light absorption coefficients of the two materials in the near ultraviolet region and the visible region can reach the order of 105 cm−1 and 104 cm−1, and the strain makes the light absorption peak red-shifted. The feasibility of temperature-controlled release mechanism of WS2 as AMD carrier was discussed. This theoretical work helps to improve the performance of two-dimensional nanomaterials and make them better as drug delivery carriers to improve the therapeutic effect of myocardial infarction. These results indicate that the WS2 monolayer has potential applications in the development of drug delivery carriers. Methods: In this study, based on first-principles calculations, the CASTEP simulation software package was used to study the structure and properties of materials. The interaction between electrons and ions is considered by using Ultrasoft pseudopotentials. In order to eliminate the spurious interaction between adjacent structures caused by periodic calculations, a vacuum space no less than 18 Å is placed in the vertical direction if necessary. Different functions may produce different density functional calculation results. Due to the low sensitivity of the crystal structure to the calculation details, the PBE functional under the generalized gradient approximation (GGA) was initially used for structural optimization, and the energy cutoff value was set to 500 eV. Grimme 's dispersion correction was used to make the results more accurate. The Brillouin zone (BZ) is sampled by a 7 × 7 × 1 K-point grid to ensure the reliability of the original lattice calculation. The lattice vector and atomic coordinates are relaxed, and the tolerance of each atom is less than 0.01 eV/Å. The energy tolerance at the atomic position is less than 10–7 eV/atom. When calculating the band gap, the HSE06 hybrid functional is used to modify the optimized structure of the PBE functional to obtain more accurate results. Spin-polarized DFT calculations were performed to calculate the electronic structure. [ABSTRACT FROM AUTHOR]

Ferritin (Ft) is a protein with a peculiar three-dimensional architecture. It is characterized by a hollow cage structure and is responsible for iron storage and detoxification in almost all living organisms. It has attracted the interest of the scientific community thanks to its appealing features, such as its nano size, thermal and pH stability, ease of functionalization, and low cost for large-scale production. Together with high storage capacity, these properties qualify Ft as a promising nanocarrier for the development of delivery systems for numerous types of biologically active molecules. In this paper, we introduce the basic structural and functional aspects of the protein, and summarize the methods employed to load bioactive molecules within the ferritin nanocage. [ABSTRACT FROM AUTHOR]

[Display omitted] • Hydrogel containing viologen-based hyperbranched polyamide amines with dual drug loading capacity. • Wearable Patch (Patch-DT) uses hydrogel as the drug-carrying cathode and magnesium flakes as the anode. • Patch-DT enables release of two drugs simultaneously, overcoming the limitations of monotherapy. • Visible drug monitoring through wearable Patch's electrochromic properties. Wearable drug delivery systems (DDS) have made significant advancements in the field of precision medicine, offering precise regulation of drug dosage, location, and timing. The performance qualities that wearable DDS has always strived for are simplicity, efficiency, and intelligence. This paper proposes a wearable dual-drug synergistic release patch. The patch is powered by a built-in magnesium battery and utilizes a hydrogel containing viologen-based hyperbranched polyamidoamine as both a cathode material and an integrated drug reservoir. This design allows for the simultaneous release of both dexamethasone and tannic acid, overcoming the limitations of monotherapy and ensuring effective synergy for on-demand therapy. In a mouse model with praziquimod-induced psoriasis, the patch demonstrated therapeutic efficacy at a low voltage. The inflammatory skin returned to normal after 5 days with the on-demand release of dual drugs. This work provides a promising treatment option considering its straightforward construction and the therapeutic advantages of dual-drug synergy. [ABSTRACT FROM AUTHOR]

Bacterial infections of the respiratory tract cause millions of deaths annually. Several diseases exist wherein (1) bacterial infection is the main cause of disease (e.g., tuberculosis and bacterial pneumonia), (2) bacterial infection is a consequence of disease and worsens the disease prognosis (e.g., cystic fibrosis), and (3) bacteria-triggered inflammation propagates the disease (e.g., chronic obstructive pulmonary disease). Current approaches to combat infections generally include long and aggressive antibiotic treatments, which challenge patient compliance, thereby making relapses common and contributing to the development of antibiotic resistance. Consequently, the proportion of infections that cannot be treated with conventional antibiotics is rapidly increasing, and novel therapies are urgently needed. In this context, antimicrobial peptides (AMPs) have received considerable attention as they may exhibit potent antimicrobial effects against antibiotic-resistant bacterial strains but with modest toxicity. In addition, some AMPs suppress inflammation and provide other host defense functions (motivating the alternative term host defense peptides (HDPs)). However, the delivery of AMPs is complicated because they are large, positively charged, and amphiphilic. As a result of this, AMP delivery systems have recently attracted attention. For airway infections, the currently investigated delivery approaches range from aerosols and dry powders to various self-assembly and nanoparticle carrier systems, as well as their combinations. In this paper, we discuss recent developments in the field, ranging from mechanistic mode-of-action studies to the application of these systems for combating bacterial infections in the airways. [ABSTRACT FROM AUTHOR]

• Cyclodextrins, polyvinylpyrrolidone, polyvinyl acetate and polyethylene glycol increase probucol solubility. • Probucol based microparticles can be dispersed in aqueous solutions, allowing for slow probucol release from the particulate matrix. • Ursodeoxycholic acid stabilises probucol microparticles and delays probucol release. • Probucol based microparticles show no cytotoxicity in permissive HEI-OC1 cells. • Ursodeoxycholic acid in combination with probucol enhances probucol's protective effects in vitro against cisplatin. Targeted drug delivery is an ongoing aspect of scientific research that is expanding through the design of micro- and nanoparticles. In this paper, we focus on spray dried microparticles as carriers for a repurposed lipophilic antioxidant (probucol). We characterise the microparticles and quantify probucol prior to assessing cytotoxicity on both control and cisplatin treated hair cells (known as House Ear Institute-Organ of Corti 1; HEI-OC1). The addition of water-soluble polymers to 2% β -cyclodextrin resulted in a stable probucol formulation. Ursodeoxycholic acid (UDCA) used as formulation excipient increases probucol miscibility and microparticle drug content. Formulation characterisations reveals spray drying results in spherical UDCA-drug microparticles with a mean size distribution of ∼5–12 μm. Probucol microparticles show stable short-term storage conditions accounting for only ∼10% loss over seven days. By mimicking cell culture conditions, both UDCA-probucol (67%) and probucol only (82%) microparticles show drug release in the initial two hours. Furthermore, probucol formulations with or without UDCA preserve cell viability and reduce cisplatin-induced oxidative stress. Mitochondrial bioenergetics results in lower basal respiration and non-mitochondrial respiration, with higher maximal respiration, spare capacity, ATP production and proton leak within cisplatin challenged UDCA-probucol groups. Overall, we present a facile method for incorporating lipophilic antioxidant carriers in polymer-based particles that are tolerated by HEI-OC1 cells and show stable drug release, sufficient in reducing cisplatin-induced reactive oxygen species accumulation. [ABSTRACT FROM AUTHOR]

Nanotechnology plays a pivotal role in the biomedical field, especially in the synthesis and regulation of drug particle size. Reducing drug particles to the micron or nanometer scale can enhance bioavailability. Supercritical fluid technology, as a green drug development strategy, is expected to resolve the challenges of thermal degradation, uneven particle size, and organic solvent residue faced by traditional methods such as milling and crystallization. This paper provides an insight into the application of super-stable homogeneous intermix formulating technology (SHIFT) and super-table pure-nanomedicine formulation technology (SPFT) developed based on supercritical fluids for drug dispersion and micronization. These technologies significantly enhance the solubility and permeability of hydrophobic drugs by controlling the particle size and morphology, and the modified drugs show excellent therapeutic efficacy in the treatment of hepatocellular carcinoma, pathological scarring, and corneal neovascularization, and their performance and efficacy are highlighted when administered through multiple routes of administration. Overall, supercritical fluids have opened a green and efficient pathway for clinical drug development, which is expected to reduce side effects and enhance therapeutic efficacy. [ABSTRACT FROM AUTHOR]

MicroRNAs (miRNAs) are small, non-coding RNAs that play a crucial role in regulating gene expression. Dysfunction in miRNAs can lead to various diseases, including cancers, neurological disorders, and cardiovascular conditions. To date, approximately 2000 miRNAs have been identified in humans. These small molecules have shown promise as disease biomarkers and potential therapeutic targets. Therefore, identifying miRNA biomarkers for diseases and developing effective miRNA drug delivery systems are essential. Nanotechnology offers promising new approaches to addressing scientific and medical challenges. Traditional miRNA detection methods include next-generation sequencing, microarrays, Northern blotting, and reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Nanotechnology can serve as an effective alternative to Northern blotting and RT-qPCR for miRNA detection. Moreover, nanomaterials exhibit unique properties that differ from larger counterparts, enabling miRNA therapeutics to more effectively enter target cells, reduce degradation in the bloodstream, and be released in specific tissues or cells. This paper reviews the application of nanotechnology in miRNA detection and drug delivery systems. Given that miRNA therapeutics are still in the developing stages, nanotechnology holds great promise for accelerating miRNA therapeutics development. [ABSTRACT FROM AUTHOR]

Hydrogels are formed of crosslinked polymer chains arranged in three-dimensional (3D) networks. These chains have good water-containing capacity and are soft and malleable. Hydrogels have good biocompatibility due to their significant water content, flexible structure, and numerous holes. These characteristics make them analogous to biological tissues. Despite the publication of 8700 literature related to hydrogel biomedical applications in the past 52 years (1973 ~ 2024), studies on the use of hydrogels in biomedicine are few. To gain a comprehensive understanding of their current development status, research trends, and prospects in the biomedical application field, it is imperative to conduct a thorough retrospective analysis. In this study, we employ bibliometric analysis and CiteSpace software to quantitatively and visually analyze articles published in this field. Firstly, we provide a quantitative analysis of authorship and institutional publications over the past 52 years to elucidate the fundamental development status regarding hydrogel biomedical applications. Secondly, we did visual studies on terms that are high-frequency, explosive, keyword clustering, and so on, to understand the directionality and evolution of the main research hotspots during each period. Notably, our findings emphasize that fabricating hydrogels into wound healing-promoting dressings emerges as a prominent hotspot within the application field. We anticipate that this paper will inspire researchers with novel ideas for advancing hydrogel applications in biomedicine. [ABSTRACT FROM AUTHOR]

This paper reviews the latest trends and applications of silicone in ophthalmology, especially related to intraocular lenses (IOLs). Silicone, or siloxane elastomer, as a synthetic polymer, has excellent biocompatibility, high chemical inertness, and hydrophobicity, enabling wide biomedical applications. The physicochemical properties of silicone are reviewed. A review of methods for mechanical and in vivo characterization of IOLs is presented as a prospective research area, since there are only a few available technologies, even though these properties are vital to ensure medical safety and suitability for clinical use, especially if long-term function is considered. IOLs represent permanent implants to replace the natural lens or for correcting vision, with the first commercial foldable lens made of silicone. Biological aspects of posterior capsular opacification have been reviewed, including the effects of the implanted silicone IOL. However, certain issues with silicone IOLs are still challenging and some conditions can prevent its application in all patients. The latest trends in nanotechnology solutions have been reviewed. Surface modifications of silicone IOLs are an efficient approach to further improve biocompatibility or to enable drug-eluting function. Different surface modifications, including coatings, can provide long-term treatments for various medical conditions or medical diagnoses through the incorporation of sensory functions. It is essential that IOL optical characteristics remain unchanged in case of drug incorporation and the application of nanoparticles can enable it. However, clinical trials related to these advanced technologies are still missing, thus preventing their clinical applications at this moment. [ABSTRACT FROM AUTHOR]

In the present paper the polyelectrolyte multilayers (PEMs) deposited on lyophilized composite polylactic acid / poly(e-caprolactone) substrates were investigated. The substrates were charged under positive corona discharge for 1 min with 5 kV voltage applied to the corona electrode and 1 kV voltage of the same polarity applied to the grid. The dependences on the time of storage of the normalized surface potential of the charged substrates (positive) were investigated. Solutions of 1 % casein in phosphate buffer (pH 8) and 0.1 % chitosan in acetate buffer (pH 5) with added benzydamine hydrochloride were prepared. The creation of the multilayers was carried out by utilizing the technique Layer-by-Layer (LbL). The first built-up layer always possesses an electric charge opposite to that of the substrate. The loading efficiency and drug release kinetics of the chosen model drug were carried out spectrophotometrically. [ABSTRACT FROM AUTHOR]

In recent years, there has been a notable surge in the utilization of stabilized bile acid liposomes, chemical conjugates, complexes, mixed micelles, and other drug delivery systems derived from bile acids, often referred to as bilosomes. The molecular structure and interactions of these amphiphilic compounds provide a distinctive and captivating subject for investigation. The enhanced stability of new generation bilosomes inside the gastrointestinal system results in the prevention of drug degradation and an improvement in mucosal penetration. These characteristics render bilosomes to be a prospective nanocarrier for pharmaceutical administration, prompting researchers to investigate their potential in other domains. This review paper discusses bilosomes that have emerged as a viable modality in the realm of drug delivery and have significant promise for use across several domains. Moreover, this underscores the need for additional investigation and advancement in order to comprehensively comprehend the prospective uses of bilosomes and their effectiveness in the field of pharmaceutical administration. This review study explores the current scholarly attention on bilosomes as prospective carriers for drug delivery. Therapeutic areas where bilosomes have shown outstanding performance in terms of drug delivery are outlined in the graphical abstract. [ABSTRACT FROM AUTHOR]

Organic–inorganic hybrids represent a good solution to improve the solubility and dissolution rates of poorly soluble drugs whose number has been increasing in the last few years. One of the most diffused inorganic matrices is hydroxyapatite (HAP), which is a biocompatible and osteoconductive material. However, the understanding of the hybrids' functioning mechanisms is in many cases limited; thus, thorough physicochemical characterizations are needed. In the present paper, we prepared hybrids of pure and Mg-doped hydroxyapatite with meloxicam, a drug pertaining to the Biopharmaceutical Classification System (BCS) class II, i.e., drugs with low solubility and high permeability. The hybrids' formation was demonstrated by FT-IR, which suggested electrostatic interactions between HAP and drug. The substitution of Mg in the HAP structure mainly produced a structural disorder and a reduction in crystallite sizes. The surface area of HAP increased after Mg doping from 82 to 103 m2g−1 as well as the pore volume, justifying the slightly high drug amount adsorbed by the Mg hybrid. Notwithstanding the low drug loading on the hybrids, the solubility, dissolution profiles and wettability markedly improved with respect to the drug alone, particularly for the Mg doped one, which was probably due to the main distribution of the drug on the HAP surface. [ABSTRACT FROM AUTHOR]

In the past few decades, many researchers have focused their research interests on nanocomposite hydrogel fibers (NHFs). These practitioners have developed and optimized techniques for preparing nanofiber membranes such as the template method, microfluidic spinning, electrospinning, wet spinning and three-dimensional printing (3D printing). NHFs have important applications in wearable monitoring, diagnosis and nursing due to their various excellent properties (such as high-water content, porous morphology, flexibility, braiding and rich active functional groups). In this paper, the latest progress of NHFs in pose monitoring, continuous monitoring of physiological indicators, diagnosis, wearables, nursing, drug delivery and dressings are reviewed. This paper also aims to review their key operational parameters, advantages and disadvantages of NHFs in the above fields, including sensitivity, working range and other special properties. Specifically, NHFs can be used for continuous monitoring of biological postures (such as gestures) or physiological indicators (such as blood sugar) in vitro and in vivo. NHFs also can be used for long-term monitoring of related indicators in the wearable field. NHFs can be used in tissue engineering and drug delivery. Finally, we look forward to the development prospects, challenges and opportunities of the next generation of NHFs. We confirm that the emergence of NHFs in the field of diagnosis and treatment has opened up a new vision for human health. Researchers have optimized the template method, microfluidic spinning, electrospinning, wet spinning and 3D printing. [ABSTRACT FROM AUTHOR]

Chitosan, a natural based-polymer obtained by alkaline deacetylation of chitin, is nontoxic, biocompatible, and biodegradable. These properties make chitosan a good candidate for the development of conventional and novel drug delivery systems. Chitosan has been found to be used as a support material for gene delivery, cell culture, and tissue engineering. However, practical use of chitosan has been mainly confined to the unmodified forms. For a breakthrough in utilization, especially in the field of controlled drug delivery, graft copolymerization onto chitosan will be a key point, which will introduce desired properties and enlarge the field of the potential applications of chitosan by choosing various types of side chains. Chemical modification of chitosan is useful for the association of bioactive molecules to polymer and controlling the drug release profile. This paper reviews the various methods of preparation of chitosan derivatives intended for controlled drug delivery. From the studies reviewed it is concluded that chitosan derivatives are promising materials for controlled drug and nonviral gene delivery. [ABSTRACT FROM AUTHOR]

Developmental physiological changes occur throughout childhood, with important changes observed within the first few weeks and months from birth, potentially affecting drug pharmacokinetics. The impact of confounding factors in relation to the availability of clinically relevant and adequate drug formulations and administration devices is underestimated. Hence, it is important to highlight presently the relevance of formulation issues. Since 2007, the EU Paediatric Regulation enforces paediatric investigation plans in which the applicant has to justify the clinical relevance of each dosage form proposed in relation to age subsets involved and the suitability of administration modalities. Therefore, pediatric drug development has become more relevant, and the importance of using age-appropriate drug formulations has been acknowledged by investigators and other stakeholders. Palatability and acceptability assessment is considered to be important by the regulatory bodies as well as excipient safety and tolerability, as it can be an issue particularly in very young children. However, there remains a lack of research into pediatric biopharmaceutics (methodological input regarding in vitro tools and bridging studies). Clinical pharmacologists with expertise ranging from pharmacodynamics, pharmacokinetics, adverse drug effects, and toxicology should actively contribute in advancing drug formulation issues in children. [ABSTRACT FROM AUTHOR]

Extracellular Vesicles (EVs) encompasses a diverse array of vesicles generated by cells, with exosomes constituting the most prominent subset within this classification. Exosomes facilitate intercellular communication by transporting various biologics derived from donor or parental cells and delivering them to recipient cells. The potential of their distinctive ability to transport cargo has recently been investigated for its application to provide anti-cancer medications and imaging agents. Exosomes, which are endogenously generated, possess numerous advantages compared to the presently employed synthetic lipid-based nanoparticles for clinical applications in cancer treatment and other medical conditions. Identifying exosomes' involvement in human diseases has prompted extensive preclinical and clinical investigations into their potential as a viable means of Drug Delivery (DD) and as a theranostic tool for cancer diagnosis and treatment. Nevertheless, it is crucial to acknowledge that exosomes possess certain limitations, with one of the primary concerns revolving around the choice of the biological source utilized to generate exosomes that are both highly biocompatible and capable of being produced in large quantities. This paper examines the diverse origins of medically feasible exosomes that can be extracted to serve as drug carriers in the context of cancer therapy. The synthesis of nanosomes for anti-cancer DD has been presented in this paper. Nanosomes have been obtained by integrating Doxorubicin-conjugated Gold Nanoparticles (DOX-GNP) and organic exosomes. The precise delivery of "armed" exosomes to tumor masses can be achieved through either "passive" targeting, which relies on the inherent tropism of exosomes, or "active" targeting, which involves modifying the surface of exosomal membranes. Despite the numerous advantages of exosomes compared to synthetic nanoparticles, there are still obstacles to overcome to improve the efficiency of loading anti-cancer agents into exosomes. Additionally, there is a need to develop quantitative and qualitative analytical techniques for monitoring the delivery of exosomes and exosome-incorporated anticancer agents to the tumor parenchyma in vivo. [ABSTRACT FROM AUTHOR]

The main goal of modern pharmaceutical technology is to create new drug formulations that are safer and more effective. These formulations should allow targeted drug delivery, improved drug stability and bioavailability, fewer side effects, and reduced drug toxicity. One successful approach for achieving these objectives is using polymer microcarriers for drug delivery. They are effective for treating various diseases through different administration routes. When creating pharmaceutical systems, choosing the right drug carrier is crucial. Biomaterials have become increasingly popular over the past few decades due to their lack of toxicity, renewable sources, and affordability. Marine polysaccharides, in particular, have been widely used as substitutes for synthetic polymers in drug carrier applications. Their inherent properties, such as biodegradability and biocompatibility, make marine polysaccharide-based microcarriers a prospective platform for developing drug delivery systems. This review paper explores the principles of microparticle design using marine polysaccharides as drug carriers. By reviewing the current literature, the paper highlights the challenges of formulating polymer microparticles, and proposes various technological solutions. It also outlines future perspectives for developing marine polysaccharides as drug microcarriers. [ABSTRACT FROM AUTHOR]

Sarcopenia is a prevalent degenerative skeletal muscle condition in the elderly population, posing a tremendous burden on diseased individuals and healthcare systems worldwide. Conventionally, sarcopenia is currently managed through nutritional interventions, physical therapy, and lifestyle modification, with no pharmaceutical agents being approved for specific use in this disease. As the pathogenesis of sarcopenia is still poorly understood and there is no treatment recognized as universally effective, recent research efforts have been directed at better comprehending this illness and diversifying treatment strategies. In this respect, this paper overviews the new advances in sarcopenia treatment in correlation with its underlying mechanisms. Specifically, this review creates an updated framework for sarcopenia, describing its etiology, pathogenesis, risk factors, and conventional treatments, further discussing emerging therapeutic approaches like new drug formulations, drug delivery systems, stem cell therapies, and tissue-engineered scaffolds in more detail. [ABSTRACT FROM AUTHOR]

Melatonin is a ubiquitous molecule found in living organisms, ranging from bacteria to plants and mammals. It possesses various properties, partly due to its robust antioxidant nature and partly owed to its specific interaction with melatonin receptors present in almost all tissues. Melatonin regulates different physiological functions and contributes to the homeostasis of the entire organism. In the human eye, a small amount of melatonin is also present, produced by cells in the anterior segment and the posterior pole, including the retina. In the eye, melatonin may provide antioxidant protection along with regulating physiological functions of ocular tissues, including intraocular pressure (IOP). Therefore, it is conceivable that the exogenous topical administration of sufficiently high amounts of melatonin to the eye could be beneficial in several instances: for the treatment of eye pathologies like glaucoma, due to the IOP-lowering and neuroprotection effects of melatonin; for the prevention of other dysfunctions, such as dry eye and refractive defects (cataract and myopia) mainly due to its antioxidant properties; for diabetic retinopathy due to its metabolic influence and neuroprotective effects; for macular degeneration due to the antioxidant and neuroprotective properties; and for uveitis, mostly owing to anti-inflammatory and immunomodulatory properties. This paper reviews the scientific evidence supporting the use of melatonin in different ocular districts. Moreover, it provides data suggesting that the topical administration of melatonin as eye drops is a real possibility, utilizing nanotechnological formulations that could improve its solubility and permeation through the eye. This way, its distribution and concentration in different ocular tissues may support its pleiotropic therapeutic effects. [ABSTRACT FROM AUTHOR]

This paper concerns the aptitudes of medical staff to explore new therapies and training exercises for image-assisted robotic diligent interventions. This exploration can be carried out using physical, digital, or both copies of patients. Such physical and digital phantoms should approximate real living tissues through realistic biological properties. Such a realistic assessment could be achieved through strategies to reduce physical and numerical uncertainties. The concept of physical-virtual matched pairs is used in image-assisted robotic interventions to enable such reduction. The present commentary aimed to analyze and illustrate possibilities for increasing the capabilities of medical personnel to explore new therapies and training exercises for image-assisted robotic diligent interventions. In this context, the manuscript focused on the use of the physical-virtual digital twin (DT) concept to monitor image-assisted robotic interventions, thereby reducing the complexity and uncertainties involved in such a procedure. Extensions involve robotic operations assisted by human-in-the-loop DT, artificial intelligence (AI), and augmented reality (AR). The various topics covered in this commentary are supported by a review of the literature. [ABSTRACT FROM AUTHOR]

Many people lose their lives to cancer each year. The prevalence of illnesses, metabolic disorders, high-risk infections, and other conditions has been greatly slowed down by expanding scientific research. Chemotherapy and radiation are still the initial lines of treatment for cancer patients, along with surgical removal of tumors. Modifications have been made in chemotherapy since medicines frequently have substantial systemic toxicity and poor pharmacokinetics and still do not reach the tumor site at effective concentrations. Chemotherapy may now be administered more safely and effectively thanks to nanotechnology. Nanotechnology-based graphene quantum dots (GQDs) are very applicable in breast cancer detection, as a drug delivery system, and in the treatment of breast cancer because of their physical and chemical properties, lower toxicity, small size, fluorescence, and effective drug delivery. This paper analyzes the GQDs as cutting-edge platforms for biotechnology and nanomedicine also its application in drug delivery in cancer. It shows that GQDs can be effectively conjugated with hyaluronic acid (HA) to achieve efficient and target-specific delivery. [ABSTRACT FROM AUTHOR]

Simple Summary: This review mainly focuses on epigenetic changes in a few selective genes associated with insulin insensitivity in the periphery and how this peripheral insulin insensitivity is linked with impaired signaling of insulin in the brain, thus causing Alzheimer's disease. DNA methylation and histone modifications are the focus of this review, with primary importance given to DNA methylation. Moreover, there has been a focus shift from the amyloid β hypothesis to epigenetic mechanisms. Furthermore, we discuss the advanced drug delivery systems that can be used for the delivery of drugs targeting the brain during Alzheimer's disease. The advanced drug delivery systems discussed in this paper are nanoparticles, vesicular systems, network systems and dendrimers, hydrogel-based systems, and biologics. Alzheimer's disease (AD) is a neurodegenerative condition that predominantly affects the hippocampus and the entorhinal complex, leading to memory lapse and cognitive impairment. This can have a negative impact on an individual's behavior, speech, and ability to navigate their surroundings. AD is one of the principal causes of dementia. One of the most accepted theories in AD, the amyloid β (Aβ) hypothesis, assumes that the buildup of the peptide Aβ is the root cause of AD. Impaired insulin signaling in the periphery and central nervous system has been considered to have an effect on the pathophysiology of AD. Further, researchers have shifted their focus to epigenetic mechanisms that are responsible for dysregulating major biochemical pathways and intracellular signaling processes responsible for directly or indirectly causing AD. The prime epigenetic mechanisms encompass DNA methylation, histone modifications, and non-coding RNA, and are majorly responsible for impairing insulin signaling both centrally and peripherally, thus leading to AD. In this review, we provide insights into the major epigenetic mechanisms involved in causing AD, such as DNA methylation and histone deacetylation. We decipher how the mechanisms alter peripheral insulin signaling and brain insulin signaling, leading to AD pathophysiology. In addition, this review also discusses the need for newer drug delivery systems for the targeted delivery of epigenetic drugs and explores targeted drug delivery systems such as nanoparticles, vesicular systems, networks, and other nano formulations in AD. Further, this review also sheds light on the future approaches used for epigenetic drug delivery. [ABSTRACT FROM AUTHOR]

Microneedles (MNs), renowned for their painless and minimally invasive qualities, exhibit significant potential for facilitating effective drug delivery, vaccination, and targeted sample extraction. Extracellular vesicles (EVs), serving as cargo for MNs, are naturally occurring nanovesicles secreted by cells and characterized by novel biomarkers, low immunogenicity, and cell-source-specific traits. MNs prove instrumental in extracting EVs from the sample fluid, thereby facilitating a promising diagnostic and prognostic tool. To harness the therapeutic potential of EVs in tissue repair, MNs with sustained delivery of EVs leverage micron-sized channels to enhance targeted site concentration, demonstrating efficacy in treating various diseases, such as Achillea tendinopathy, hair loss, spinal cord injury, and diabetic ulcers. EV-loaded MNs emerge as a promising platform for repair applications of skin, cardiac, tendon, hair, and spinal cord tissues. This review commences with an overview of MNs, subsequently delving into the role of EVs as cargo for MNs. The paper then synthesizes the latest advancements in the use of EV-loaded MNs for tissue regenerative repair, extending to research progress in extracting EVs from MNs for disease diagnosis and prognostic evaluations. It aims to offer valuable insights and forecast future research trajectories with the hope of inspiring innovative ideas among researchers in this field. [ABSTRACT FROM AUTHOR]

Carbon quantum dots (CQDs) represent a novel class of nanomaterials with uniquely interesting spectroscopic and dimensional features. Owing to their general low toxicity, they are preferred for application in drug delivery. Newer CQDs are plausible by substituting metal elements that impart new characteristics. This paper presents a novel dysprosium-doped CQD nanomaterial made as a composite with a β-cyclodextrin–polyethylene glycol–folate polymer. The synthesized material is characterized using X-ray diffraction, transmission electron microscopy, X-ray photoelectron and IR spectroscopies. The amount of polymer in the composite is investigated using thermogravimetric analysis. The size of the polymer-containing CQDS is around 8 nm. The dysprosium doping makes them magnetic in nature. Further, the material shows a broad absorption with the tail absorbance extending up to the near-infrared wavelength region. The designed nanocarrier shows a high camptothecin encapsulation efficiency of 91.03%. The in vitro anticancer studies on MCF-7 cells are carried out, and the IC50 value is more significant than the free carrier, implying a combined effect of the nanocarrier and the drug in action against the breast cancer cell lines. [ABSTRACT FROM AUTHOR]

Simple Summary: Silk fibroin (SF) from silkworms is exceptionally biocompatible and biodegradable. The nanoparticle delivery systems constructed with SF can improve drug delivery and enhance action efficiency. This review outlines the various nanoparticle delivery systems, focusing on the application and potential of eco-friendly SF as a delivery system in animal husbandry. The aim is to provide theoretical references for the further development and application of SF in animal husbandry. Silk fibroin (SF), a unique natural polymeric fibrous protein extracted from Bombyx mori cocoons, accounts for approximately 75% of the total mass of silk. It has great application prospects due to its outstanding biocompatibility, biodegradability, low immunogenicity, and mechanical stability. Additionally, it is non-toxic and environmentally friendly. Nanoparticle delivery systems constructed with SF can improve the bioavailability of the carriers, increase the loading rates, control the release behavior of the deliverables, and enhance their action efficiencies. Animal husbandry is an integral part of agriculture and plays a vital role in the development of the rural economy. However, the pillar industry experiences a lot of difficulties, like drug abuse while treating major animal diseases, and serious environmental pollution, restricting sustainable development. Interestingly, the limited use cases of silk fibroin nanoparticle (SF NP) delivery systems in animal husbandry, such as veterinary vaccines and feed additives, have shown great promise. This paper first reviews the SF NP delivery system with regard to its advantages, disadvantages, and applications. Moreover, we describe the application status and developmental prospects of SF NP delivery systems to provide theoretical references for further development in livestock production and promote the high-quality and healthy development of animal husbandry. [ABSTRACT FROM AUTHOR]

Optimising drug delivery to tumours remains an obstacle to effective cancer treatment. A prerequisite for successful chemotherapy is that the drugs reach all tumour cells. The vascular network of tumours, extravasation across the capillary wall and penetration throughout the extracellular matrix limit the delivery of drugs. Ultrasound combined with microbubbles has been shown to improve the therapeutic response in preclinical and clinical studies. Most studies apply microbubbles designed as ultrasound contrast agents. Acoustic Cluster Therapy (ACT®) is a novel approach based on ultrasound-activated microbubbles, which have a diameter 5–10 times larger than regular contrast agent microbubbles. An advantage of using such large microbubbles is that they are in contact with a larger part of the capillary wall, and the oscillating microbubbles exert more effective biomechanical effects on the vessel wall. In accordance with this, ACT® has shown promising therapeutic results in combination with various drugs and drug-loaded nanoparticles. Knowledge of the mechanism and behaviour of drugs and microbubbles is needed to optimise ACT®. Real-time intravital microscopy (IVM) is a useful tool for such studies. This paper presents the experimental setup design for visualising ACT® microbubbles within the vasculature of tumours implanted in dorsal window (DW) chambers. It presents ultrasound setups, the integration and alignment of the ultrasound field with the optical system in live animal experiments, and the methodologies for visualisation and analysing the recordings. Dextran was used as a fluorescent marker to visualise the blood vessels and to trace drug extravasation and penetration into the extracellular matrix. The results reveal that the experimental setup successfully recorded the kinetics of extravasation and penetration distances into the extracellular matrix, offering a deeper understanding of ACT's mechanisms and potential in localised drug delivery. [ABSTRACT FROM AUTHOR]

Metal sulfide nanoparticles are synthesized for their biomedical applications, including cancer drug targeting. This paper reports a novel nanocomposite made of praseodymium sulfide nanoparticles and poly-cyclodextrin. The praseodymium sulfide nanoparticles were synthesized hydrothermal, autoclaving the nitrate precursors at 150 °C for 18 hours. The material is characterized using XRD and shows an orthorhombic crystal system with high crystallinity. The size and morphology of the nanomaterial were optimized. The material shows a rod-shaped morphology, as seen in the TEM image, with 150 ± 3 nm length and 25 ± 5 nm width. Particle size analysis supports this size range. The colloidal particles were stable in the aqueous medium without precipitation at neutral pH. The elements in the material in the polymer-coated form and their electronic states are studied by X-ray photoelectron spectroscopy. Thermogravimetry confirms that the material contains about 18.5% of the weight of the polymer. The material has an observable magnetic property at room temperature due to the praseodymium element. The UV–vis–NIR absorption spectrum of the material shows a long absorption range that extends to 1200 nm. The drug 5-fluorouracil is encapsulated in the nanoparticles through host: guest association, and its release profile is analyzed. The release is modulated at a slightly acidic pH, indicating the pH-tunability. The nanoparticles and 5-fluorouracil were taken in the w/w ratio of 2:1 (2/1 mg in 1 mL of deionized water). Further, the in vitro anticancer activity of the drug-encapsulated material is screened on breast cancer and non-cancerous cell lines. The IC 50 values are reported, and the advantageous properties of the material as drug carriers are discussed. • Drug carrier nanorods are designed using praseodymium sulfide and poly-cyclodextrin. • The nanoparticles are weakly magnetic with low saturation. • It shows a long tail absorption band that extends up to the NIR-II wavelength range. • The encapsulated 5-fluorouracil is released continually for more than 10 days. • Drug-containing Pr2S3 nanoparticles are selectively active on MCF-7 cell lines. [ABSTRACT FROM AUTHOR]

A drug nanocrystal self-stabilized Pickering emulsion (DNSPE) is a novel Pickering emulsion with drug nanocrystals as the stabilizer. As a promising drug delivery system, DNSPEs have attracted increasing attention in recent years due to their high drug loading capacity and ability to reduce potential safety hazards posed by surfactants or specific solid particles. This paper comprehensively reviews the progress of research on DNSPEs, with an emphasis on the main factors influencing their construction, characteristics and measurement methods in vitro, and fate in vivo, and puts forward issues that need to be studied further. The review contributes to the advancement of DNSPE research and the promotion of their application in the field of drug delivery. [ABSTRACT FROM AUTHOR]

Effective drug delivery is essential for cancer treatment. Drug delivery systems, which can be tailored to targeted transport and integrated tumor therapy, are vital in improving the efficiency of cancer treatment. Peptides play a significant role in various biological and physiological functions and offer high design flexibility, excellent biocompatibility, adjustable morphology, and biodegradability, making them promising candidates for drug delivery. This paper reviews peptide-mediated drug delivery systems, focusing on self-assembled peptides and peptide–drug conjugates. It discusses the mechanisms and structural control of self-assembled peptides, the varieties and roles of peptide–drug conjugates, and strategies to augment peptide stability. The review concludes by addressing challenges and future directions. [ABSTRACT FROM AUTHOR]

In recent years, polymeric materials have been used in a wide range of applications in a variety of fields. In particular, in the field of bioengineering, the use of natural biomaterials offers a possible new avenue for the development of products with better biocompatibility, biodegradability, and non-toxicity. This paper reviews the structural and physicochemical properties of alginate and hyaluronic acid, as well as the applications of the modified cross-linked derivatives in tissue engineering and drug delivery. This paper summarizes the application of alginate and hyaluronic acid in bone tissue engineering, wound dressings, and drug carriers. We provide some ideas on how to replace or combine alginate-based composites with hyaluronic-acid-based composites in tissue engineering and drug delivery to achieve better eco-economic value. [ABSTRACT FROM AUTHOR]

Recently, neurological disorders have led to a growing global burden of fatalities and disabilities. The limited capacity for natural self‐regeneration poses a significant challenge in repairing nervous system injuries, which is closely related to the complex microenvironment and nonregenerative nature of neurons. Metal–organic frameworks (MOFs), with their distinctive structure and properties including high surface area, porosity, tunability, stimuli‐responsive behavior, biocompatibility, and biodegradability, stand as an auspicious platform for devising therapeutic strategies aiming at nerve regeneration and repair. By taking advantage of these characteristics, researchers have the opportunity to explore innovative methods including endogenous stimulation, magnetic response therapy, phototherapy, ultrasound therapy, and drug delivery systems for the treatment of neurological diseases. Moreover, MOFs‐based stem cell therapy also is developed to inhibit neuroinflammation and oxidative stress, promote axon growth, regulate stem cell differentiation, promote nerve regeneration, and finally restore the function of injured nerves. In this paper, the preparation strategy and biological characteristics of MOFs, highlighting their applications in repairing nerve injuries and treating neural stem cells is presented. Finally, an outlook on the future development and challenges in the field of neuroscience concerning MOFs is provided. [ABSTRACT FROM AUTHOR]

Noise‐induced hearing loss (NIHL) is a common outcome of excessive reactive oxygen species in the cochlea, and the targeted delivery of antioxidants to the inner ear is a potential therapeutic strategy. In this paper, a novel natural biomaterials‐derived multifunctional delivery system using silk fibroin‐polydopamine (PDA)‐composited inverse opal microcarriers (PDA@SFMCs) is presented for inner ear drug delivery and NIHL therapy. Due to their large specific surface area and interpenetrating nanochannels, PDA@SFMCs can rapidly load active biomolecules making them a convenient medium for the storage and delivery of such molecules. In addition, surface modification of PDA enables the microcarriers to remain in the round window niche, thus facilitating the precise local and directed delivery of loaded drugs. Based on these features, it is demonstrated here that n‐acetylcysteine‐loaded silk microcarriers have satisfactory antioxidant properties on cells and can successfully prevent NIHL in guinea pigs. These results indicate that the natural multifunctional silk microcarriers are promising agents for local inner ear drug delivery in the clinic. [ABSTRACT FROM AUTHOR]

Graphite carbon nitride (g-C3N 4) polymer with two-dimensional planar structure is a new star in nanodrug delivery systems in recent years because it shows characteristics of low cost, nontoxicity, biocompatibility and easy functionalization. However, conventional g-C3N4 shows bulk, macro size, small specific surface area and poor water solubility. To improve this, most works are always confined to physical ultrasound, oxidative peeling or template-strategy, which have the disadvantages of redundant steps, environment-unfriendliness and high cost. In this paper, a modified supramolecular self-assembled strategy was carried out to construct a novel graphitic carbon nitride nanoplatform (named by CA-MA X) using melamine and cyanuric as precursors. The chemical structure characterization, drug loading experiment and cell tests in vitro of the CA-MA X nanoplatform were carried out and discussed in detail. Results indicated that the obtained samples show enhanced specific surface area, more exposed groups and good biocompatibility. Compared to the traditional carbon nitride (named by MA-CN), the newly prepared CA-MA X carrier shows improved drug loading efficiency and good pH-responsive loading, as well as releasing. Cell uptake experiment demonstrates that CA-MA2-DOX can be swallowed by cancer cells and during treatment of the cancer cell process, the CA-MA2-DOX complex experiences phagocytizing by the cancer cell, controlled-release DOX and kills the cancer cell after DOX was passively diffused into the nucleus. CA-MA2-DOX exhibited significant in vitro antitumor activity. To our knowledge, this is the first time the supramolecular self-assembled method was used in carbon nitride nanocarrier construction for cancer treatment. g-C3N4 nano-platform was prepared via supramolecular self-assembly strategy, which is used as drug delivery for the first time to deliver small molecule drugs for cancer therapy. The obtained samples show higher specific surface area (78.9 m2/g), more exposed groups and good biocompatibility, making it more suitable to be used as drugs carrier. Compared to the traditional g-C3N4, it shows improved encapsulation efficiency, good pH response and a significant in vitro antitumor activity. [ABSTRACT FROM AUTHOR]

The unique properties of ionic liquids (ILs), such as structural tunability, good solubility, chemical/thermal stability, favorable biocompatibility, and simplicity of preparation, have led to a wide range of applications in the pharmaceutical and biomedical fields. ILs can not only speed up the chemical reaction process, improve the yield, and reduce environmental pollution but also improve many problems in the field of medicine, such as the poor drug solubility, product crystal instability, poor biological activity, and low drug delivery efficiency. This paper presents a systematic and concise analysis of the recent advancements and further applications of ILs in the pharmaceutical field from the aspects of drug synthesis, drug analysis, drug solubilization, and drug crystal engineering. Additionally, it explores the biomedical field, covering aspects such as drug carriers, stabilization of proteins, antimicrobials, and bioactive ionic liquids. [ABSTRACT FROM AUTHOR]

Hydrotropic solubilization is a technique that can be used to improve the solubility of drugs that are poorly soluble. This technique involves adding a large amount of a second solute, known as a hydrotrope, which increases the aqueous solubility of the poorly soluble drug. Hydrotropes such as sodium citrate, sodium benzoate, and urea have been shown to be effective in enhancing the solubility of poorly soluble drugs. This technique has several advantages over other solubility enhancement techniques, including its cost-effectiveness, eco-friendliness, and the fact that it does not require chemical modification of hydrophobic drugs or the use of organic solvents. Hydrotropic agents are now being used to develop various dosage forms, including solid dispersions, mouth-dissolving tablets, and injections, to improve poorly water-soluble drugs' therapeutic effectiveness and bioavailability. This review paper will provide an overview of hydrotropic solubilization techniques. [ABSTRACT FROM AUTHOR]

Several formulations have been developed in the current era using liposomes and niosomes as vesicular carriers, which have proven useful in oral drug delivery; nevertheless, their use is limited due to their gastrointestinal environment, including pH, enzymes, and bile salts. To overcome these difficulties, researchers are working on finding ways to improve the efficacy and stability of vesicles. Therefore bilosomes have been developed as promising vesicular carriers with the potential to deliver oral vaccines, parenteral and transdermal targeted drug delivery. In addition to incorporating hydrophilic as well as lipophilic drugs into vesicles, bilosomes are considered one of the most effective methods for enhancing bioavailability and efficacy. Bile acid-based bilosomes are rapidly growing in the current research areas and are expected to provide multiple applications in the pharmaceutical and biomedical fields that will occur in the future with bile salts. This paper briefly introduces the bilosomes of a new generation (structure), their mechanism of action, stability, physicochemical properties, and potential biomedical applications including in oral immunization. Furthermore, surface-engineered bilosomes are more effective than bare bilosomes in various animal models, but clinical trials are needed to assess their safety and efficacy. There is also a need for more research on scaling-up factors for commercializing bilosomal systems. [ABSTRACT FROM AUTHOR]

Vitamins are crucial for sustaining life because they play an essential role in numerous physiological processes. Vitamin deficiencies can lead to a wide range of severe health issues. In this context, there is a need to administer vitamin supplements through appropriate routes, such as the oral route, to ensure effective treatment. Therefore, understanding the pharmacokinetics of vitamins provides critical insights into absorption, distribution, and metabolism, all of which are essential for achieving the desired pharmacological response. In this review paper, we present information on vitamin deficiencies and emphasize the significance of understanding vitamin pharmacokinetics for improved clinical research. The pharmacokinetics of several vitamins face various challenges, and thus, this work briefly outlines the current issues and their potential solutions. We also discuss the feasibility of enhanced nanocarrier‐based pharmaceutical formulations for delivering vitamins. Recent studies have shown a preference for nanoformulations, which can address major limitations such as stability, solubility, absorption, and toxicity. Ultimately, the pharmacokinetics of pharmaceutical dosage forms containing vitamins can impede the treatment of diseases and disorders related to vitamin deficiency. [ABSTRACT FROM AUTHOR]