Search

Hydrogen fuel is a non-toxic and source-abundant energetic system, but for its applications in the industry, several issues related to its storage must be resolved. Compounds like NaBH 4 appear as promising hydrogen sources, while can release the latter rapidly under controllable conditions with the use of heterogeneous catalyst systems. In this work, we synthesized a Ni–CoP catalyst by electrodeposition in a three-step process on carbon paper as support. The materials were characterized via SEM-EDS, XRD, and XPS techniques, while the hydrogen evolution reaction (HER) from alkaline NaBH 4 solutions was tested as a batch experiment. Ni–CoP catalyst showed a high amount of H 2 generated in a short time (∼550 mL in 1 min) and remained at 78 and 54% of its initial performance after respectively 100 and 300 h of a continuous hydrolysis process. Our catalyst revealed exceptional performance and stability at higher temperatures and a long process time, which have been a rare subject of investigation in other reports for NaBH 4 hydrolysis in the past. This work paves a new perspective in studying catalysts for hydrogen generation from borohydrides. [Display omitted] • Ni–CoP catalyst was electrodeposited on a carbon support. • Material characterization proved the formation of desired active layers. • High efficiency and stability of the catalyst for a long-term NaBH 4 hydrolysis was revealed. [ABSTRACT FROM AUTHOR]

In recent years, the catalyst efficiency of hydrogen evolution reaction (HER) has been extensively studied. However, the stability of catalysts at high current densities is still a challenge. Herein, layered Ni−Co−P was electrodeposited on carbon fiber paper (CFP) via cyclic voltammetry (CV). This low‐cost electrode exhibits high efficiency and excellent durability for HER in 1 M KOH. To achieve current densities of 10, 100, 500, and 1000 mA cm−2, Ni−Co−P/CFP required overpotentials of 49, 95, 170, and 295 mV, respectively. The layered structure allows the catalyst to fall off layer by layer. After the outer layer of catalyst falls off, the inner layer of catalyst will be exposed to continue working. After 300 h of HER at 1000 mA cm−2, Ni−Co−P/CFP still has a regular morphology and high efficiency. Our work shows that layered Ni−Co−P/CFP has excellent prospects for practical applications. [ABSTRACT FROM AUTHOR]

• Co doped MoS 2 was decorated on nitrogen-doped carbon fiber/carbon paper (NCFCP) by a solvothermal process. • The lattice spacing of (1 0 0) plane of Co-MoS 2 was slightly narrow than that of MoS 2. • The as-prepared Co-MoS 2 /NCFCP hybrids showed enhanced electrochemical activity for HER. In this paper, Co-doped MoS 2 (Co-MoS 2) with various Co/Mo mole ratio (6%–12%) decorated on nitrogen-doped carbon fiber/carbon paper (NCFCP) (Co-MoS 2 /NCFCP) is fabricated by a solvothermal method as an efficient electrocatalyst for hydrogen evolution reaction (HER). The NCFCP substrate is prepared by electrochemical deposition of polypyrrole on carbon paper followed by heat treatment. The obtained 9% Co-MoS 2 /NCFCP hybrid catalyst exhibits an excellent electrocatalytic HER activity with a low overpotential of 174 mV at 10 mA cm−2, a small Tafel slope of 52 mV dec−1 and long-term stability. Thus, Co-MoS 2 /NCFCP hybrid holds high potential as an efficient earth-abundant electrocatalyst material for HER. [ABSTRACT FROM AUTHOR]

Hydrogen (H2) is a new type of renewable energy that can meet people's growing energy needs and is environmentally friendly. In order to improve the industrial application prospects and electrochemical performance of hydrogen evolution catalysts, extensive research on transition metal materials has been carried out. Among the many catalytic materials, cobalt is an element with potential for the hydrogen evolution reaction (HER) due to its abundant reserves, low cost, and small energy barrier for H adsorption. This review classifies the latest research on cobalt-based catalysts according to the types of compound, including cobalt-based sulfides, phosphides, carbides, borides, oxides, etc., and summarizes the latest research progress of cobalt-based compound catalysts in acidic and alkaline media. Strategies to tune the properties of cobalt-based compound catalysts for high catalytic activity for HER are focused on, including structural engineering, defect engineering, and doping, etc. The advantages and limitations of each modified approach are reviewed. Not only that, but also the catalytic activity and advantages of the catalyst are evaluated by using density functional theory (DFT) calculation-related descriptors, activity evaluation parameters, etc. Finally, limitations and challenges of cobalt-based materials for HER are presented, as well as prospects for future research. This paper aims to understand the chemical and physical factors that affect cobalt-based catalysts, and to find directions for future research on cobalt-based catalysts. [ABSTRACT FROM AUTHOR]

Summary: Catalysts with cobalt (Co) and graphitic carbon hybrid structure are receiving significant attention in various electrocatalysis applications because of their stability and high activities. In addition, the size and the well dispersed distribution of metal active site are some of the most important factors for electrocatalyst. In this paper, we successfully synthesized ultra‐small and well dispersed Co nanoparticle on nitrogen‐doped carbon structure (Co/NC) adding and evaporating a Zinc (Zn) and found the optimized ratio of Co and Zn. We used a bottom‐up method to synthesize catalysts with Co on carbon substrate structure from zeolitic imidazolate frameworks (ZIF). Zinc (Zn) was also added and evaporated by pyrolysis. By addition and evaporation of Zn, Co nanoparticle became smaller and more evenly dispersed. As a result, the OER performance was significantly improved than the catalyst without Zn. Also, an optimized catalyst with abundant uniformly dispersed Co was successfully synthesized by appropriately controlling the ratio of Co and Zn comprising the ZIFs. As the ratio of Zn increased, the size and the amount of Co nanoparticles were decreased, and Co nanoparticles were more evenly dispersed. Furthermore, carbon substrate has more porous structure due to the evaporation of Zn atoms. When the Co:Zn ratio was 1:3, Co/NC showed the best electrocatalytic performance due to optimized active sites and large surface area. The optimized Co/NC showed an overpotential of 1.56 V (vs RHE) to acquire a current density of 10 mA cm−2, which is higher activity than commercial RuO2. We also analyzed the material characterization occurred as the ratio of Zn in ZIF increased, revealing the factors enhancing the OER activity. Optimized Co/NC (Co:Zn = 1:3) exhibited improved OER activity and long‐term and cycle stability in the OER. [ABSTRACT FROM AUTHOR]

Over the course of a few decades, the concern of environmental damages of fossil fuels, an increase in CO 2 emission and a decrease of hydrogen have been growing more and more. Accordingly, hydrogen production is a crucial issue nowadays. Different polymers are applied to attain the purpose. Among all polymers, biodegradables polymers are the best choices to develop the main aim. Polysaccharides and proteins are biodegradable polymers with unique places and advantages with regards to their ecofriendly properties. There are different techniques to apply and achieve the foremost purpose. It is worthwhile to mention that green and facile methods are always attracting attention in different aspects and fields. The three non-polluting and economical techniques, that is, electrochemical hydrogen evolution reaction (HER), photocatalytic technique, and hydrolysis of hydrides, are reviewed in this paper. This review helps researchers, who are environment supporters, to evaluate and choose the most ecological biopolymers and processes in their work. [Display omitted] • Developments in hydrogen evolution by biopolymer-derived (nano)catalysts have been described. • Summary of synthetic procedures to obtain biopolymer-derived (nano)catalysts. • Future challenges of hydrogen evolution using biopolymer-derived (nano)catalysts have been discussed. [ABSTRACT FROM AUTHOR]

Synthesis of catalysts with high activity for hydrogen evolution reaction (HER) has been a hot topic in electrocatalysis. In this paper, using MIL-88A(Fe) metal-organic complex, polyoxometalate (POM) and H2PtCl6 as starting materials, hierarchic and low Pt0-loading micro-rods (denoted as Pt-POMFe, i.e. Pt-PW12Fe or Pt-PMo12Fe) have been synthesized, in which the Pt0 nanoparticles can be stabilized by POM. The Pt-PW12Fe micro-rod containing [PW12O40]3- polyoxoanion component (0.30% Pt0-loading) which retains the spindle structure of its parent MIL-88A(Fe) exhibits a low overpotential of 28 mV at current density of 10 mA·cm−2 for HER that is close to the electrocatalytic effect of commercial Pt/C (ca. 20% Pt0-loading). Such high electrocatalytic reactivity is mainly caused by the synergistic effect of the three components of POM, Pt0, and Fe3O4@C. The structure effectively increases the active sites of the catalyst and improves its conductivity and stability. The Pt-POMFe catalyst extends a new family of MOF-POM functional materials and provides a new concept to the design and synthesis of highly-efficient and low-cost electrocatalyst for hydrogen production. [ABSTRACT FROM AUTHOR]

In this paper, we present a solvothermal synthesis of iron phosphide electrocatalysts using a triphenylphosphine (TPP) precursor. The synthetic protocol generates Fe 2 P phase at 300 °C and FeP phase at 350 °C. To enhance the catalytic activities of obtained iron phosphide particles heat-treatments were carried out at elevated temperatures. Annealing at 500 °C under reductive atmosphere induced structural changes in the samples: (i) Fe 2 P provided a pure Fe 3 P phase (Fe 3 P−500 °C) and (ii) FeP transformed into a mixture of iron phosphide phases (Fe 2 P/FeP−500 °C). Pure Fe 2 P films was prepared under argon atmosphere at 450 °C (Fe 2 P−450 °C). The electrocatalytic activities of heat-treated Fe 2 P−450 °C, Fe 3 P−500 °C, and Fe 2 P/FeP−500 °C catalysts were studied for hydrogen evolution reaction (HER) in 0.5 M H 2 SO 4. The HER activities of the iron phosphide catalyst were found to be phase dependent. The lowest electrode potential of 110 mV vs. a reversible hydrogen electrode (RHE) at 10 mA cm−2 was achieved with Fe 2 P/FeP−500 °C catalyst. Image 1 • Iron phosphides catalyst were synthesized via a wet-chemistry method. • Spin-coating of iron phosphide particles onto graphite substrates yielded uniform thin films. • Heat treatment of iron phosphides at 500 °C resulted in structural changes. • The iron phosphide films were used as electrocatalysts for efficient hydrogen evolution. [ABSTRACT FROM AUTHOR]

Developing cost‐effective and highly active hydrogen evolution reaction (HER) electrocatalysts is of pivotal importance in the roadmap of hydrogen economy. Increasing active sites and improving conductivity are two effective strategies to optimize the performance of electrocatalyst. In this paper, we report a highly active HER catalyst consisting of ultra‐small molybdenum carbide nanoparticles uniformly entrapped in mesoporous carbon microspheres (Mo2C@MCS) fabricated by in situ synthesis. In 1 M KOH, the catalyst exhibits an excellent HER performance with a pretty low overpotential (134 mV at current density of 10 mA cm−2) and a small Tafel slope (51 mV dec−1), which exceeded the currently reported un‐doped Mo2C catalyst. The excellent HER performance is attributed to the abundant active sites provided by the ultra‐small Mo2C nanoparticles as well as the superior conductivity originated from carbon matrix and the intimate contact between Mo2C nanoparticles and mesoporous carbon wall. [ABSTRACT FROM AUTHOR]

• A simple method for synthesizing pCdS/Cu 2 O/g-C 3 N 4 composites is presented. • This work provides a new insight into the catalyst design. • Ciprofloxacin degradation reaction was over 18 times faster than pure g-C 3 N 4. • Hydrogen generation was over 18.4 times higher than pure g-C 3 N 4. • Hydrogen generation was comparable with recent publications in leading journals. We develop facile hydrothermal and precipitation approaches to fabricate porous CdS (pCdS) nanoparticles on octahedral Cu 2 O (1 1 1) microcrystals on C 3 N 4 and thus enabling to build novel pCdS/Cu 2 O/g-C 3 N 4 dual p-n Junctions. This dual p-n Junction structure would enhance charge carrier separation and transfer ability for achieving highly efficient photo/catalysis, which is much better than individual g-C 3 N 4 or pCdS/Cu 2 O p-n junctions. The degradation of ciprofloxacin (CIP) using pCdS/Cu 2 O/g-C 3 N 4 composites as a catalyst will make the reaction remarkably faster (over 18 times) than pure g-C 3 N 4. Its photocatalytic effect is well demonstrated through water splitting under simulated sunlight irradiation, where the hydrogen generation rate of 1.84 mmol h−1 g−1, i.e. over 18.40 times higher than pure g-C 3 N 4 , is achieved benefiting from its higher charge separation rate. This work provides not only a new insight into the catalyst design but also offer a stable and reusable pCdS/Cu 2 O/g-C 3 N 4 dual p-n Junctions composite as a highly efficient catalyst for use in environmental rumination and hydrogen generation. The comparison of the photocatalytic hydrogen production performance of the presented photocatalyst with some recent papers published especially in leading journals in this field proves further its significant advancement in this field. [ABSTRACT FROM AUTHOR]

We demonstrate a lamellar NiMoCo@CuS catalyst, showing not only an excellent catalyst performance (η100@72 mV and a Tafel slope of 47 mV dec−1), but also a good stability (20 mA cm−2@30 hours), outperforming the NiMo system and noble Pt. [ABSTRACT FROM AUTHOR]