Search

We evaluated and compared the physiological and morphological response to pollution of two epiphytic lichen species, the foliose lichen Flavopunctelia praesignis and the fruticose lichen Usnea ceratina. Lichen samples were collected at remote areas and transplanted at different distances and directions from a paper industry in Morelia (Michoacán, Mexico). Lichen transplants were exposed for 4 months (1) around the industrial area and (2) in their native habitats (control sites). Changes of total chlorophyll content between samples before and after exposure, and morphological damage in the lichen thalli were investigated. Lichens showed species-specific responses. Flavopunctelia praesignis increased in total chlorophyll content after exposure around the industrial area and in control site. This suggests that total chlorophyll changes by a seasonal effect than pollution effect. On the other hand, chlorophyll content of U. ceratina did not change significantly after exposure. Bleaching, changes in color, deformations, and necrosis of lichen thalli were better visible in U. ceratina near the paper industry. We conclude that U. ceratina is a more pollution-sensitive species than F. praesignis. Morphological damage in the lichen thalli would be a suitable indicator for monitoring early biological effects of air pollution caused by the paper industry. [ABSTRACT FROM AUTHOR]

Objectives Paper dust has previously been linked to adverse health effects. However, a comprehensive dataset of paper dust exposures does not appear to have been published previously. Our study was intended to address this need by describing a large dataset of measurements made in Swedish soft tissue paper mills. Methods We compiled personal and area total dust exposure measurements collected from a range of operations by our research staff at four soft tissue paper mills in Sweden. We also compiled measurements made by the occupational health staff at each mill and the Swedish Work Environment Authority. We analyzed these measurements to describe patterns and trends in exposures and used mixed-effects regression models to identify measurement characteristics that predicted exposure levels. Results We compiled 1578 measurements from 1971 to 2009, of which 1026 (65%) were personal samples. Statistically significant differences were found between measurements made by research, mill, and Swedish Work Environment Authority staff, as well as between personal and area measurements. The measurement data suggest that, beginning in the 1980s, exposures declined at three of the four mills, but that overexposures were still common at the end of the period. Papermaking and converting operations had the highest observed dust exposures. One mill had significantly lower exposures than the others. Type of measurement (personal versus area) and source of measurement (research staff, company, or regulatory agency) were not significant predictors of measured total dust exposure after controlling for mill, operation, and time. Conclusions Our analysis of measured paper dust exposures may be useful for historical and contemporary exposure assessment in our own and other epidemiological studies. We have identified specific characteristics (i.e. papermaking operations and mill) and time trends that are important data features to consider, and documented continuing overexposure situations. Our results highlight the ongoing need for application of exposure controls to reduce paper dust exposures in the soft tissue paper industry. [ABSTRACT FROM AUTHOR]

Abstract To reduce pollution emissions and achieve a cleaner production in paper industry, it is essential to understand the inner links between concentrations of gaseous pollutants, types of final products and production techniques. In this study, the concentrations of four potential gaseous pollutants, total volatile organic compounds (TVOC), formaldehyde (HCHO), hydrogen sulfide (H 2 S), and hydrocarbon compounds (C x H y), in the ambient air on thirty sampling points of five pulp and paper mills were detected and analyzed. The results were summarized with respect to the following aspects: (1) Levels of four gaseous pollutants on all the sampling points in five mills. It was obvious that the situation of gaseous pollution from pulp mill was much more serious than those from paper mills. (2) Gaseous pollutant distinctions due to different production processes. The levels of gaseous pollutants from five mills were greatly influenced by the utilized raw materials and the applied paper chemical agents (flavor, coating materials and additives) in mills. (3) Gaseous pollution comparisons at common points. At the two common points in five mills, i.e. the wet end of paper machine and the wastewater treatment process, TVOC and HCHO, C x H y and H 2 S were the main gaseous pollutants, respectively. In addition, some feasible measures to realize a cleaner production in pulping and papermaking process were also put forward in the article. Highlights • We analyze the levels of 4 gaseous pollutants on 30 sites of 5 pulp & paper mills. • Gaseous pollution distinctions due to different production processes are studied. • Feasible measures to realize the cleaner production in the processes are suggested. • Gaseous pollution are greatly affected by raw materials and added paper chemicals. [ABSTRACT FROM AUTHOR]

Acidification mechanisms of paper were examined, studying 120 pairs of identical copies of books published from 1971 to 2010 housed in two Japanese university libraries. The pH at the edges of the alkaline paper lowered from 7.5 to 6.4 after 5–10 years and to 5.8 after 10–15 years after publication. The pH bottomed at 5.4 at the edges and at 7.0 in the centre of the sheet. Acid paper showed higher pH at the edges than in the centre of the sheet. The edge pH of the alkaline paper of books stored on an above-ground floor was lower due to more exposure to incoming open air with pollutants compared to paper stored in the basement. Elemental analysis suggested nitrogen oxide deposition, but could not prove sulphur oxide deposition at the edges of the paper. The position-dependent acidification is presumed to relate to the deposition tendency of air pollutants contained in open air, and accordingly the edge pH dropped dramatically. In the 1980s, alkaline paper was increasingly used in the production of books, and it was assumed that no more book acidification was to occur; however, this study concludes that even in alkaline paper, acidification processes will take place over time. [ABSTRACT FROM AUTHOR]

In recent years, several studies have reported the recycling of by-products generated by the paper industry and their application to the construction industry. A majority of the existing studies used waste paper sludge ash, and considerable energy is consumed in such incineration processes. This may further contribute to air pollution. In this study, we used waste newspaper (WNP), which underwent a simple crushing process without a separate high-temperature treatment process, and we integrated it in cement mortar. We prepared mortars containing 0%, 0.2%, 0.4%, 0.6%, 0.8%, and 1.0% ground WNP as a cement substitute. Subsequently, the fluidity, compressive strength, tensile strength, carbonation depth, drying shrinkage, and microstructure of the mortars were compared and analyzed. The 28-day compressive strength of the mortar samples with WNP was approximately 3.2–16.1% higher than that of the control sample. The 28-day accelerated carbonation depth of the samples with WNP was approximately 1.03–1.61 mm. Furthermore, their carbonation resistance was approximately 5.2–39.4% higher than that of the control sample. Compressive strength, tensile strength, and carbonation resistance were improved by appropriately using ground WNP as a cement substitute in cement mortar. In this study, the appropriate amount of WNP according to the mechanical properties of cement mortar was found to be 0.4–0.8%, and considering the durability characteristics, the value 0.6 was the most ideal. [ABSTRACT FROM AUTHOR]

Abstract On-site spatial variation study of airborne trace metals has been known to be the key to providing a comprehensive evaluation of air pollution information at any targeted location. However, the existing portable approaches either do not allow sample analysis in the longitudinal direction or is not yet practically applicable due to due to the lack of a portable detection method. In this paper, by integrating paper based colorimetric detection via cellphone and unmanned aerial vehicle (UAV) in-air sampling, we present an approach for on-site multiaxial quantification of airborne trace metals in an arrayed format. Using a self-built sampler mounting on a UAV, our approach enables automatic, multiaxial air PM sampling. In addition, by relying only on a cellphone and a custom-made field reaction kit, samples collected in-air can be readily processed, detected in an arrayed format and interpreted on-site within 30 min. Finally, an ultrafast batch-to-batch paper microfluidic chip fabrication protocol enables 48 chips to be fabricated under 30 s at a cost of 1.92 $, making the approach well-suited for disposable on-site use. Our system was first calibrated for 6 metals commonly found in airborne PM (i.e. Co, Cu, Fe, Mn, Cr and Ni), and the corresponding metals detection limits were found to be 8.16, 45.84, 1.86 × 102, 10.08, 1.52 × 102 and 80.40 ng. The validity of our approach was then demonstrated by characterizing 6 metals commonly found in air PM using a certified ash sample, and the experimentally determined metal weight percentage showed a good agreement with the manufacture certified value. Finally, the approach was used for on-site airborne trace metals spatial variation study at 4 difference locations in Fuzhou City (China), thus demonstrating the significance of our approach in supplementing air pollution information gathering and progressing rapid, on-site air toxicity assessment research. Graphical abstract Image 1 Highlights • Cellphone-based on-site quantification of airborne trace metals in an arrayed format. • High-throughput, automatic colorimetric images process using a self-developed app. • Automated multiaxial ambient pollutants sampling using a modified unmanned aerial vehicle. • Ultrafast batch-to-batch chip fabrication protocol to further reduce the cost per analysis. [ABSTRACT FROM AUTHOR]

Accurate and quantitative profiling of air particulate matter (PM) compositions is essential for assessing local pollution information. The method combining mobile aerial sampling using unmanned aerial vehicles (UAVs) and prompt analysis excels in this regard as it allows spatiotemporal mapping of air pollution, especially in the vertical direction. However, applications of the method are still scarce as it is limited by a lack of sampling reliability due to insufficient aerial sampling time and a lack of accurate, portable quantification techniques. In this work, by integrating mobile aerial sampling with in-flight tethered charging and smartphone-based colorimetric analysis in a cost-effective paper microfluidic device, we present a method for quantitative, reliable profiling of spatiotemporal variation in air PM compositions. The method extends aerial sampling time to 12–15 flight hours per deployment, thereby significantly improving sampling reliability while maintaining the maneuverability of the UAVs. Also, smartphone-based colorimetric analysis combined with paper-based microfluidics enables portable, economically efficient analysis and is well-suited for using in low-resource settings. We demonstrated the utility of the method by carrying out a spatiotemporal variation study of air PM trace metal components (Fe, Ni, and Mn) at 4 geographical locations in Fuzhou, China, for a period of 21 days, and the results were in good agreement with results obtained from using a commercial instrument. Beside air PM composition study, this method is universally applicable and holds great potential to be extended to multipollutant analysis, such as prompt detection of airborne viruses, bacteria, and others. [ABSTRACT FROM AUTHOR]

The aim of the study was to evaluate the TAD of Akure, Ondo State, Nigeria. In this study, rainwater samples were collected monthly in a polyethylene container attached to a funnel for a period of twelve (12) months at 40 designated sites (residential, industrial, and traffic-related areas). The rainwater samples were filtered, the masses of TAD on the filter paper were determined gravimetrically, and atmospheric deposition rates were calculated. Meteorological data were measured at a monitoring site at the Department of Meteorology, Federal University of Technology, Akure, Ondo State, Nigeria. From the results obtained in this study, it was observed that deposition rated ranged between 5 and 427 μg/m². The average temperatures, wind speed, relative humidity, rainfall and wind direction for the periods were 25.00oC, 0.63 mph, 83.74%, 0.03mm and 117.43oC (2015) and 26.2 oC, 0.74mph, 81.89%, 0.92mm, 118.32o (2016). There were relationships between TAD and meteorological parameters. The results showed that TAD in many parts of the studied areas exceeded the World Health Organization guideline standards (350 μg/m²). [ABSTRACT FROM AUTHOR]

How atmospheric pollution is perceived by urban dwellers has long been a topic of interest within geography and the social sciences, whether to draw attention to environmental injustices, to better understand the materialities and affects associated with polluted air, or to grasp how people 'tune in' to polluted matter. In this paper, we draw on three interrelated geographical and social science literatures on polluted air to inform our exploration of how residents of an industrial town in the UK encounter and perceive localised ambient air pollution. Using creative methods, we explore residents' narrative accounts of everyday life in the town, revealing how their engagements with the matter of pollution over time are drawn from multiple registers, giving rise to a plurality of perceptions filled with tensions between near and far, and between past, present and future, producing an ambiguous atmosphere all of its own. The paper contributes to geographic explorations of urban atmospheres an understanding of how they are differently experienced and known, and how residential perceptions might persist or change over different timescales. [ABSTRACT FROM AUTHOR]

As a key project of China's western development, the West-East Natural Gas Transmission Project (WENGT) has effectively alleviated China's uneven energy distribution and supply-demand issues. It has promoted the optimization of China's energy structure and sustainable development in the new era, helping to achieve the goal of "double carbon". Based on pollution data from Chinese industrial enterprises from 2000 to 2012, this paper analyzes the impact of the West-East Natural Gas Pipeline Project on the air pollution emissions of industrial enterprises using a difference-in-difference model and explores the moderating role of local government environmental regulations. The findings indicate that the project significantly reduced air pollutant emissions from industrial enterprises in cities along the route, with a more pronounced reduction effect in areas with higher environmental regulation intensity. Additionally, the emission reduction effect varied among different types of enterprises and regions, with private enterprises showing the smallest reduction impact and the eastern coastal region exhibiting the most significant effect. This paper delves into the relationship between sustainable cross-regional energy development and air pollution emissions from industrial enterprises, providing a theoretical basis for energy conservation and emission reduction policies in China. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to present the case for critical realism (CR) as a framework in steering the anticipatory and participatory activities an appropriate analysis of complex problems, aiming toward a transformative change. Design/methodology/approach: Through observation, interview and facilitation for Circular Design Lab and Thai Clean Air Network, this paper unpacks their foresight activities, their key findings and subsequently connects to the Morphogenesis analysis based on an alternative foresight epistemology of CR. Findings: Foresight based on CR philosophy provides a deeper understanding of the complexity and invisibility of air pollution issues in Thailand. Acknowledging the transitive reality beyond this study's perception, the activity design applies the iceberg models to investigate problem framing and illustrate the stratified reality in three domains: the empirical based on emission reports and legislative regulations; the actual based on patterns of farmers practice and industrial development, activated by causal mechanisms; the real based on structural and mental models, driven by cultural and belief systems in Thailand. At the bottom layer of the iceberg, the real lies the generative mechanisms of pre-existing structural and cultures that constrain Thai citizen from acting on social change. Research limitations/implications: CR's emancipatory theory provides an immanent critique towards social improvement by illustrating comprehensive causal explanations of complex problems such as air pollution; while morphogenesis theory elaborates on the unconscious domination of the existing social structures, agencies, and cultures. Thus, the ethical inquiry of CR research is committed to the emancipation of false beliefs and creating conditions for "human prosperity". However, this non-neutral value commitment is debated in the futures studies field. Practical implications: The anticipatory activities on air pollution in Thailand bring to light the reality of power and oppression beyond human perception and illustrate the connection to the belief systems and its consequential action or lack thereof in dealing with the issues. The insight to power relationship provides an unconventional way to empower citizens in creating transformative change. Originality/value: Modern foresight practice has developed under western cultures and societies. Recent efforts are made to investigate the epistemology underlying this field, for the future issues are ever more complex and interrelated across multiple sectors. This requires this study's consideration of the meaning of knowledge and knowing, influencing the research paradigm. This paper proposes CR as a suitable foresight approach to emancipate this study from the widely accepted epistemologies and examine this study's presupposition about social reality by a philosophical explanation based on the elements of ontology, causation, structure and persons. [ABSTRACT FROM AUTHOR]

The consequences of sustainable and greener mobility have been demonstrated previous year by the pandemic situation. One significant benefit was to reduce the level of noise, dust and air pollution from the traffic in many European countries due to reduced mobility most of the population. Positive phenomena was also recorded in the Slovak Republic. Today's urban mobility offers new, more sustainable ways of transport for residents, especially app-based and shared-ride services, which have become increasingly widespread and very popular. Undoubtedly offer a level of convenience unseen before in the urban mobility systems throughout the world. Although new forms of transport are developed in most Slovak cities, their operation is not very rational and therefore individual car transport still dominates at the expense of sustainable ways of transport. In our paper, we analyze the traffic situation in the city of Nitra, as the large number of trips in the course of the peak-hours often results in severe traffic congestion. Multimodality is one of the solutions to improve the current traffic situation, as it allows urban residents to choose from a range of alternative travel options. The main aim of this paper is to determinate the possibilities of multimodal urban mobility in the city of Nitra in addition to analyze how the potential change in the variability of choice of means of transport affects the urban mobility behaviour. In order to meet stated objectives, a marketing research was conducted. The research findings point to the fact that the current urban infrastructure and overall possibilities are limited, the consequence of which is that travel behaviour of citizens does not demonstrate the features of sustainable urban mobility. Our results point to major differences in attitudes of Nitra´s residents from different urban and sub-urban areas. [ABSTRACT FROM AUTHOR]

Objective Both exposure to occupational chemicals and to unusual working hours have well documented effects on health. Determination of occupational exposure limits is, however, usually based on chemical-only exposure and assumes an 8-h workday, 5 days/week and a 40-h work week. A significant proportion of the workforce is exposed to chemicals while working in other work schedules. This review thus aimed to synthesize and evaluate the scientific support for a combined effect of unusual working hours and chemical exposure and, if possible, give recommendations for OEL adjustments to account for unusual working hours. Methods The search for articles was made as part of the preparation of a report for the Nordic Expert Group for Criteria Documentation of Health Risks from Chemicals. In this report, unusual working hours were categorized as shift work or extended (>8 h) working hours. Inclusion criteria were observational studies in the English language published up to November 2021 in peer-reviewed journals, with explicit metrics of exposure (chemicals and unusual working hours) and of health outcome, and which explicitly tested the association between exposure and outcome. Search engines of seven databases were used. Results Of the initially 15 400 identified papers, 9 studies published between 1985 and 2021 met the inclusion criteria, 7 of which showed significant associations. Results from a few of the studies, i.e. regarding effects of dust and endotoxin on lung function, effects of acetone on sleep quality and tiredness, effects of carbon disulphide on coronary artery disease and effects of chemicals on spontaneous abortion, suggested more pronounced effects during night shifts compared to during day shifts. Discussion The reviewed data is considered insufficient to conclude on recommendations for OEL adjustment for shift work. Suggested areas of future studies are mentioned. Conclusion Further studies about the effects of the combined exposure to unusual working hours and chemical exposure are essential for risk assessment, and for recommendation of potential OEL adjustments. What is important about this paper? Effects of chemical agents at the workplace may depend not only on exposure level and duration but also on the time of exposure in relation to the circadian rhythm. This study reviewed the scientific support for a combined effect of unusual working hours and chemical exposure and revealed an obvious need for additional studies regarding the complex interplay of the two different exposures with respect to adverse health effects. [ABSTRACT FROM AUTHOR]

We are witnessing an explosion in carbon calculators for estimating the greenhouse gas (GHG) emissions (i.e., carbon footprint) of households, buildings, cities, and processes. Seeking to capitalize on the emergent 'green' consumer, corporations are leading the next iteration in carbon footprinting: consumer products. This potentially lucrative low-carbon frontier, however, faces steep challenges due to complexities of scale, largely a function of the number of actors and geographies involved in globalized commodity and energy networks, and scope, which increasingly demands inclusion of emissions due to land use change (e.g., biofuel production, timber harvest, livestock grazing, mining). Life cycle assessment (LCA)-the principal method behind product-level GHG emissions footprint protocols-frequently avoids these challenges by narrowly delineating system boundaries, thereby excluding the 'messiness' of space and place. Through a comparative model of energy sources and emissions in the globalized paper industry, this article reveals how complexities associated with geographic variation and land use change create indeterminacy in footprints based on these protocols. Using industry and trade data, the authors develop geographic information system transportation and energy models to map the globally dispersed pulp supply networks and to rescale Intergovernmental Panel on Climate Change GHG inventory guidelines to include carbon loss associated with land use change in the carbon footprint of coated paper. Given their integrative abilities to conceptualize and model coupled human-ecological systems, sophisticated understanding of time-space dynamics and critical theoretical insights, geographers have much to contribute to the LCA and product carbon footprinting enterprise, which to date has been largely the intellectual domain of engineers. [ABSTRACT FROM AUTHOR]

The observed global climate change is an indisputable cause of the increased frequency of extreme weather events and related natural disasters. This phenomenon is observed all over the world including Poland. Moreover, Polish citizens as tourists are also exposed to climate phenomena that do not occur in our climate zone. Extreme weather events and related disasters can have a significant impact on people with allergic diseases, including asthma. These effects may be associated with the exposure to air pollution, allergens, and specific microclimate conditions. Under the auspices of the Polish Society of Allergology, experts in the field of environmental allergy prepared a statement on climate changes, natural disasters and allergy and asthma to reduce the risk of adverse health events provoked by climate and weather factors. The guidelines contain the description of the factors related to climate changes and natural disasters affecting the course of allergic diseases, the specific microclimate conditions and the recommendations of the Polish Society of Allergology for vulnerable population, patients suffering from asthma and allergy diseases, allergologists and authorities in the event of climate and weather hazards. [ABSTRACT FROM AUTHOR]

Rapid and selective sensing of sulfur dioxide (SO2) gas has attracted more and more attention because SO2 not only causes environmental pollution but also severely affects the health of human beings. Here we report an amino-functionalized luminescent metal-organic framework (MOF) material (i.e., MOF-5-NH2) and further investigate its sensing property for SO2 gas and its derivatives as a luminescent probe. The results indicate that the MOF-5-NH2 probe can selectively and sensitively sense SO2 derivatives (i.e., SO3 2-) in real time by a luminescence turn-on effect with a lower detection limit of 0.168 ppm and a response time of less than 15 s. Importantly, the luminescence turn-on phenomenon can be observed by the naked eye. We also assembled MOF-5-NH2 into a test paper to achieve the aim of portable detection, and the lower-limit concentration of the test paper for sensing SO2 in real time was found to be about 0.05 ppm. Moreover, MOF-5-NH2 also shows good anti-interference ability, strong luminescence stability, and reusability, which means that this material is an excellent sensing candidate. The amino functionalization may also provide a modification strategy to design luminescent sensors for other atmospheric pollutants. [ABSTRACT FROM AUTHOR]

Abstract: This paper tests whether adopting the international norm ISO 14001 significantly impacts environmental performance in Quebec''s pulp and paper industry. Using monthly data collected from 37 plants between 1997 and 2003, we show that: (i) ISO certification does not lead to a reduction in total suspended solid emissions or in quantity of rejected process water; (ii) discharge of biological oxygen demand decreases by about 9% following certification; (iii) contrary to the group of plants that did not adopt the ISO norm, the adopting plants did not experience a significant negative trend in emissions over our sample period. Moreover, our results show that the impact of ISO is very variable across adopting plants. If some plants considerably reduce emissions following certification, we find that most adopters either maintain or even increase emissions after being ISO accredited. [Copyright &y& Elsevier]

Deals with a study which investigated the uptake of air pollutants and their synergistic effects on paper. Chemical reactions involved in the adsorption of sulfur dioxide in paper; Experimental set up; Results; Discussion.

Simple Summary: Dairy farming is a significant source of pollutant gas emissions, contributing to climate change and air quality degradation. Understanding these emissions in milk production promotes productive efficiency and sustainable resource use. The aim of this paper is to provide a comprehensive analysis of ammonia and greenhouse gas emissions in dairy farming, utilizing bibliometric analysis methods. Articles featuring experimental data collection were selected, exclusively in English. The databases considered were Scopus and Web of Science. The analyses were conducted using Bibliometrix version 4.0.0 and VOSviewer version 1.6.20 tools to create knowledge maps visualizing information on research countries, institutions, author collaborations, and keyword networks. The search yielded 187 articles related to major pollutant gases such as methane, ammonia, carbon dioxide, nitrous oxide, and hydrogen sulfide. This study provided valuable insights into gas emission sources, air quality, environmental sustainability, and animal welfare, as well as identifying gaps and critical points in research on the topic. Ammonia and greenhouse gas emissions in dairy farming are crucial for climate change mitigation and sustainable agriculture. This research can contribute to academic interests while enhancing agricultural practices and informing environmental policies. The relevance of this research will persist with the growing demand for sustainable practices, as more researchers and organizations recognize the importance of gas emissions and mitigation research. A deeper understanding of gas emissions in milk production is crucial for promoting productive efficiency, sustainable resource use, and animal welfare. This paper aims to analyze ammonia and greenhouse gas emissions in dairy farming using bibliometric methods. A total of 187 English-language articles with experimental data from the Scopus and Web of Science databases (January 1987 to April 2024) were reviewed. Publications notably increased from 1997, with the highest number of papers published in 2022. Research mainly focuses on ammonia and methane emissions, including quantification, volatilization, and mitigation strategies. Other gases like carbon dioxide, nitrous oxide, and hydrogen sulfide were also studied. Key institutions include the University of California–Davis and Aarhus University. Bibliometric analysis revealed research evolution, identifying trends, gaps, and future research opportunities. This bibliometric analysis offers insights into emissions, air quality, sustainability, and animal welfare in dairy farming, highlighting areas for innovative mitigation strategies to enhance production sustainability. This research contributes to academia, enhancing agricultural practices, and informing environmental policies. It is possible to conclude that this research is a valuable tool for understanding the evolution of research on gas emissions in dairy cattle facilities, providing guidance for future studies and interventions to promote more sustainable production. [ABSTRACT FROM AUTHOR]

Various forms of pollution carry a substantial burden with respect to increasing the risk of causing and exacerbating noncommunicable diseases, especially cardiovascular disease. The first part of this 2-part series on pollution and cardiovascular disease provided an overview of the impact of global warming and air pollution. This second paper provides an overview of the impact of water, soil, noise, and light pollution on the cardiovascular system. This review discusses the biological mechanisms underlying these effects and potential environmental biometrics of exposure. What is clear from both these pollution papers is that significant efforts and redoubled urgency are needed to reduce the sources of pollution in our environment, to incorporate environmental risk factors into medical education, to provide resources for research, and, ultimately, to protect those who are particularly vulnerable and susceptible. [Display omitted] • Increasing evidence suggests that water, soil, noise, and light pollution increase cardiovascular morbidity and mortality. • The mechanisms linking these sources of pollution to cardiovascular disease are diverse, making mitigation efforts challenging, but evolving methods to track these sources of pollution may point to new strategies. • Collectively, these data underscore the urgent need to address pollution in all its forms at a global level. [ABSTRACT FROM AUTHOR]

The Upper Hunter Valley is a major coal mining area in New South Wales (NSW), Australia. Due to the ongoing increase in mining activities, PM10 (air-borne particles with an aerodynamic diameter less than 10 micrometres) pollution has become a major air quality concern in local communities. The present study was initiated to quantitatively examine the spatial and temporal variability of PM10 pollution in the region. An earlier paper of this study identified two air quality subregions in the valley. This paper aims to provide a holistic summarisation of the relationships between elevated PM10 pollution in two subregions and the local- and synoptic-scale meteorological conditions for spring and summer, when PM10 pollution is relatively high. A catalogue of twelve synoptic types and a set of six local meteorological patterns were quantitatively derived and linked to each other using the self-organising map (SOM) technique. The complex meteorology–air pollution relationships were visualised and interpreted on the SOM planes for two representative locations. It was found that the influence of local meteorological patterns differed significantly for mean PM10 levels vs. the occurrence of elevated pollution events and between air quality subregions. In contrast, synoptic types showed generally similar relationships with mean vs. elevated PM10 pollution in the valley. Two local meteorological patterns, the hot–dry–northwesterly wind conditions and the hot–dry–calm conditions, were found to be the most PM10 pollution conducive in the valley when combined with a set of synoptic counterparts. These synoptic types are featured with the influence of an eastward migrating continental high-pressure system and westerly troughs, or a ridge extending northwest towards coastal northern NSW or southern Queensland from the Tasman Sea. The method and results can be used in air quality research for other locations of NSW, or similar regions elsewhere. [ABSTRACT FROM AUTHOR]

Since 2013, Permitted Development Rights (PDR) in England have allowed commercial-to-residential conversions in locations once deemed suitable only for non-residential land-use. This deregulation of planning control has been justified as a way of encouraging more home-building in areas experiencing 'housing crisis', but its overall consequences remain unclear. This paper hence compiles quantitative evidence on a city-wide scale on the price, size, build and location of these conversions in London 2013–2021. It finds that homes produced through this route are generally smaller than the London average and are over-concentrated in neighbourhoods with fewer accessible green spaces and higher-than-average levels of air pollution. Here, larger conversion schemes (of more than 10 units) appear particularly problematic, potentially subjecting residents to forms of 'slow violence' that could have long-term consequences for their physical and mental health. The paper also finds that, on average, PDR conversions are marginally more affordable than other new developments in the capital, but are also more expensive per square metre, suggesting deregulation is allowing developers to 'extract' maximum value from these schemes rather than providing affordable homes per se. The implications of this are discussed in relation to the politics of housing in London and the wider forms of planning deregulation allowing developers to accrue increased profits from housing in an era of intense financialisation. [ABSTRACT FROM AUTHOR]

This paper uses machine learning approaches to predict the association between traffic volume, air pollution, and meteorological conditions. A key focus is on the interaction between these factors. The paper does this using hourly traffic volume, N O x , P M 2.5 , and weather data for Oslo, Norway. I considered a total of six datasets of the 2019 whole-year data to verify the prediction accuracy of the models. I find that the autoregressive integrated moving average model with exogenous input variables, and the autoregressive moving average dynamic linear model outperform the machine learning models in predicting air pollution. At the same time, I also explored the effect of sampling weather subsets on prediction accuracy. Finally, my study makes optimal policy recommendations for reducing air pollution from traffic volume, after considering the interaction and lagged effects of meteorology, time variables, traffic, and air pollution. [ABSTRACT FROM AUTHOR]

Many researchers have studied the role of air pollutants on cognitive function, changes in brain structure, and occurrence of dementia. Due to the wide range of studies and often contradictory results, the present systematic review was conducted to try and clarify the relationship between air pollutants and dementia. To identify studies for this review, a systematic search was conducted in Scopus, PubMed, and Web of Science databases (without historical restrictions) until May 22, 2023. The PECO statement was created to clarify the research question, and articles that did not meet the criteria of this statement were excluded. In this review, animal studies, laboratory studies, books, review articles, conference papers and letters to the editors were avoided. Also, studies focused on the effect of air pollutants on cellular and biochemical changes (without investigating dementia) were also excluded. A quality assessment was done according to the type of design of each article, using the checklist developed by the Joanna Briggs Institute (JBI). Finally, selected studies were reviewed and discussed in terms of Alzheimer's dementia and non-Alzheimer's dementia. We identified 14,924 articles through a systematic search in databases, and after comprehensive reviews, 53 articles were found to be eligible for inclusion in the current systematic review. The results showed that chronic exposure to higher levels of air pollutants was associated with adverse effects on cognitive abilities and the presence of dementia. Studies strongly supported the negative effects of PM2.5 and then NO2 on the brain and the development of neurodegenerative disorders in old age. Because the onset of brain structural changes due to dementia begins decades before the onset of disease symptoms, and that exposure to air pollution is considered a modifiable risk factor, taking preventive measures to reduce air pollution and introducing behavioral interventions to reduce people's exposure to pollutants is advisable. [ABSTRACT FROM AUTHOR]

One of the main global problems related to the environment is air pollution which not only affects the environment and the ecosystem but also affects human health. Many countries of the world did research on how to reduce air pollution so that the concentrations do not exceed the permissible thresholds which are set at that level so that neither human health nor the environment are exposed to further damage. One of the issues regarding air pollution is the concentrations of PM particles 2.5 and 10, PM particles are a big problem in developing countries such as the Republic of North Macedonia. The research paper was focused in processing the data that has been collected for daily averages of PM 2,5 and PM10 particles that contribute in air pollution. All analyzes and processing of the results are done in compliance with the current laws of the Republic of North Macedonia and with Directive 2008/50/EC, all for µg/m3. In the city of Skopje, numerous exceedances of the permissible thresholds of PM particles 2.5 and 10 were recorded at the two measurement stations where the results were obtained for the months of January, February, March, April, May and June of 2023. [ABSTRACT FROM AUTHOR]

This paper aims to evaluate the statistical association between exposure to air pollution and forced expiratory volume in the first second (FEV1) in both asthmatic and non-asthmatic children and teenagers, in which the response variable FEV1 was repeatedly measured on a monthly basis, characterizing a longitudinal experiment. Due to the nature of the data, an robust linear mixed model (RLMM), combined with a robust principal component analysis (RPCA), is proposed to handle the multicollinearity among the covariates and the impact of extreme observations (high levels of air contaminants) on the estimates. The Huber and Tukey loss functions are considered to obtain robust estimators of the parameters in the linear mixed model (LMM). A finite sample size investigation is conducted under the scenario where the covariates follow linear time series models with and without additive outliers (AO). The impact of the time-correlation and the outliers on the estimates of the fixed effect parameters in the LMM is investigated. In the real data analysis, the robust model strategy evidenced that RPCA exhibits three principal component (PC), mainly related to relative humidity (Hmd), particulate matter with a diameter smaller than 10 μm (PM10) and particulate matter with a diameter smaller than 2.5 μm (PM2.5). [ABSTRACT FROM AUTHOR]

As Industry 4.0 develops, enterprises are investing in the industrial intelligent transformation. Using unique data from Chinese industrial enterprises, this paper investigates whether air quality affects the upgrading of industrial intelligence in enterprises. We find that decreased air quality improves industrial intelligence for enterprises, as enterprises increase their use of intelligent industrial robots when air pollution causes shortages of labour quantity and efficiency. Further analysis shows that large-scale enterprises and enterprises in areas with high economic development are more inclined to develop industrial intelligence in response to decreased air quality than their counterparts. In addition, the results indicate that the intelligent transformation of enterprises can improve their performance. This study provides a new perspective on the impact of environmental issues on corporate behaviour. [ABSTRACT FROM AUTHOR]

Understanding public awareness of environmental problems is vital for effectively formulating sustainable policies. This paper aims to investigate the impacts of two perspectives—external air pollution and individual health status—on public awareness by leveraging panel data from two waves of the China Family Panel Studies (CFPS) conducted between 2018 and 2020. The model integrates provincial-level PM2.5 concentration indicators and SO2, PMs, and NOx emissions. The results reveal a significantly positive correlation between air pollution and public awareness of environmental problems in China. Additionally, this study examines the impact of self-assessed health shock by categorizing it into worse and better health. The influence of better health is insignificant. Conversely, when individuals experience worse health, they may perceive it as a psychological loss, leading to a significant increase in public awareness of environmental problems. This study provides valuable insights for mitigating air pollution and reinforcing public health in developing countries. [ABSTRACT FROM AUTHOR]

Air quality is a fundamental component of a healthy environment for human beings. Monitoring networks for air pollution have been established in numerous industrial zones. The data collected by the pervasive monitoring devices can be utilized not only for determining the current environmental condition, but also for forecasting it in the near future. This paper considers the applications of different machine learning methods for the prediction of the two most widely used quantities. Particulate matter (PM) with a diameter of 2.5 and 10 µm, respectively. The data are collected via a proprietary monitoring station, designated as the Ecolumn. The Ecolumn monitors a number of key parameters, including temperature, pressure, humidity, PM 1.0, PM 2.5, and PM 10, in a timely manner. The data were employed in the development of multiple models based on selected machine learning methods. The decision tree, random forest, recurrent neural network, and long short-term memory models were employed. Experiments were conducted with varying hyperparameters and network architectures. Different time scales (10 min, 1 h, and 24 h) were examined. The most optimal results were observed for the Long Short-Term Memory algorithm when utilizing the shortest available time spans (shortest averaging times). The decision tree and random forest algorithms demonstrated unexpectedly high performance for long averaging times, exhibiting only a slight decline in accuracy compared to neural networks for shorter averaging times. Recommendations for the potential applicability of the tested methods were formulated. [ABSTRACT FROM AUTHOR]

Air pollution is an integral part of climatic, environmental, and socioeconomic current affairs and a cross-cutting component of certain United Nations Sustainable Development Goals (SDGs). Hence, reliable information on air pollution and human exposure is a crucial element in policy recommendations and decisions. At the same time, Earth Observation is steadily gaining confidence as a data input in the calculation of various SDG indicators. The current paper focuses on the usability of modern satellite remote sensing in the context of SDGs relevant to air quality. We introduce the socioeconomic importance of air quality and discuss the current uptake of geospatial information. The latest developments in Earth Observation provide measurements of finer spatial, temporal, and radiometric resolution products with increased global coverage, long-term continuation, and coherence in measurements. Leveraging on the two latest operational satellite technologies available, namely the Sentinel-5P and the Geostationary Environment Monitoring Spectrometer (GEMS) missions, we demonstrate two potential operational applications for quantifying air pollution at city and regional scales. Based on the two examples and by discussing the near-future anticipated geospatial capabilities, we showcase and advocate that the potential of satellite remote sensing as a, complementary to ground station networks, source of air pollution information is gaining confidence. As such, it can be an invaluable tool for quantifying global air pollution and deriving robust population exposure estimates. [ABSTRACT FROM AUTHOR]

This paper focuses on the combustion of hydrogen in boilers, as it appears to be a more effective method than using fuel cells for heating purposes due to higher boiler efficiency. One of the main disadvantages of hydrogen combustion in air is NO x formation. Therefore, the authors decided to introduce corona discharge as an innovative technique to clean hydrogen flue gas by effectively reducing NO x levels. The method involves generating positive plasma at atmospheric pressure by applying up to a 23 kV voltage difference between rod and ring-shaped electrodes. Experimental studies have shown that corona discharge can significantly lower the concentrations of NO and NO x in exhaust gases. The maximum DeNO x level was found to be 32.3%, while the plasma generator uses 17.5% of the power contained in burned hydrogen. The findings suggest that this technology holds potential for application in industrial hydrogen combustion systems, offering an environmentally friendly alternative to conventional NO x reduction methods. [Display omitted] • Corona discharge is promising approach for cleaning hydrogen flue gas from NO x. • The level of NO x removal depends on their concentration. • After plasma treatment, the level of NO decreases while NO 2 increases. • The maximum investigated level of DeNO x was 32.3%. [ABSTRACT FROM AUTHOR]

Individuals' sensitivity to climate hazards is a central component of their vulnerability to climate change. In this paper, we introduce and outline the utility of a new intraindividual variability construct, affective sensitivity to air pollution (ASAP)–defined as the extent to which an individual's affective states fluctuate in accordance with daily changes in air quality. As such, ASAP pushes beyond examination of differences in individuals' exposures to air pollution to examination of differences in individuals' sensitivities to air pollution. Building on known associations between air pollution exposure and adverse mental health outcomes, we empirically illustrate how application of Bayesian multilevel models to intensive repeated measures data obtained in an experience sampling study (N = 150) over one year can be used to examine whether and how individuals' daily affective states fluctuate with the daily concentrations of outdoor air pollution in their county. Results indicate construct viability, as we found substantial interindividual differences in ASAP for both affect arousal and affect valence. This suggests that repeated measures of individuals' day-to-day affect provides a new way of measuring their sensitivity to climate change. In addition to contributing to discourse around climate vulnerability, the intraindividual variability construct and methodology proposed here can help better integrate affect and mental health in climate adaptation policies, plans, and programs. [ABSTRACT FROM AUTHOR]

Objectives: To assess the association between air pollution exposure and housing context during pregnancy and adverse birth outcomes. Methods: We linked air pollution data from the Environmental Protection Agency and housing data from the American Community Survey with birth records from Wisconsin counties over a 9-year period. We calculated average daily pregnancy exposure to fine particulate matter and ozone and modeled its relationship to preterm birth, low birthweight and NICU admission, adjusting for individual characteristics and housing context. Results: Ozone exposure and housing cost-burden had substantive and statistically significant negative associations with birthweight and gestational age, and positive associations with NICU admission, while a poor-quality housing environment had a significant negative effect on weeks of gestation. Fine particulate matter exposure had a negligible correlation with these outcomes. Conclusions for practice: An additional tenth of one part-per-million daily average exposure to ozone is associated with a 33 g decrease in birthweight. This decrease in birthweight is about the same size as the association of gestational diabetes (32 g), larger than the association of chronic hypertension (22 g), and about 40% the size of the effect of smoking during pregnancy on birthweight (84 g). Given the magnitudes of the associations with atmospheric ozone and adverse birth outcomes, reducing atmospheric ozone should be a public health priority. Inclusion of controls for housing cost-burden and poor-quality housing reduces the magnitude of the association with mothers who identify as Black, suggesting the importance of these structural factors in understanding adverse birth outcomes by race. Significance: What is already known on this subject: It is well documented that poor birth outcomes are linked to experiences of social and economic disadvantage, however, environmental correlates of poor birth outcomes are under-researched. Existing research does not account for the ways in which environmental, sociodemographic, and structural factors could confound each other given the concentration of environmental pollutants in communities of color and low-income communities. What this study adds: In this paper, we account for individual sociodemographic characteristics, access to emergency infant healthcare, and neighborhood housing factors to clarify the independent association of air pollution on birth outcomes in Wisconsin across a nine-year period. [ABSTRACT FROM AUTHOR]

This paper presents the findings from a collaborative interlaboratory comparison exercise designed to assess oxidative potential (OP) measurements conducted by 20 laboratories worldwide. This study represents an innovative effort as the first exercise specifically aimed at harmonising this type of OP assay, setting a new benchmark in the field. Over the last decade, there has been a noticeable increase in OP studies, with numerous research groups investigating the effects of exposure to air pollution particles through the evaluation of OP levels. However, the absence of standardised methods for OP measurements has resulted in variability in results across different groups, rendering meaningful comparisons challenging. To address this issue, this study engages in an international effort to compare OP measurements using a simplified method (with a dithiothreitol (DTT) assay). Here, we quantify the OP in liquid samples to focus on the protocol measurement itself, while future ILCs should aim to assess the full-chain process, including the sample extraction. We analyse the similarities and discrepancies observed in the results, identifying the critical parameters (such as the instrument used, the use of a simplified protocol, the delivery and analysis time) that could influence OP measurements, and provide recommendations for future studies and interlaboratory comparisons. Even if other crucial aspects, such as sampling PM methods, sample storage, extraction methods and conditions, and the evaluation of other OP assays, still need to be standardised. This collaborative approach enhances the robustness of the OP-DTT assay and paves the way for future studies to build on a unified framework. This pioneering work concludes that interlaboratory comparisons provide essential insights into the OP metric and are crucial to move toward the harmonisation of OP measurements. [ABSTRACT FROM AUTHOR]

Air pollution has been associated with several health problems. Detecting and measuring the concentration of harmful pollutants present in complex air mixtures has been a long-standing challenge, due to the intrinsic difficulty of distinguishing among these substances from interferent species and environmental conditions, both indoor and outdoor. Despite all efforts devoted by the scientific and industrial communities to tackling this challenge, the availability of suitable device technologies able to selectively discriminate these pollutants present in the air at minute, yet dangerous, concentrations and provide a quantitative measure of their concentrations is still an unmet need. Thermal conductivity detectors (TCDs) show promising characteristics that make them ideal gas sensing tools capable of recognising different gas analytes based on their physical fingerprint characteristics at the molecular level, such as their density, thermal conductivity, dynamic viscosity, and others. In this paper, the operation of TCD gas sensors is presented and explored using a finite element simulation of Joule heating in a sensing electrode placed in a gas volume. The results obtained show that the temperature, and hence, the resistance of the individual suspended microbridge sensor device, depends on the surrounding gas and its thermal conductivity, while the sensitivity and power consumption depend on the properties of the constitutive metal. Moreover, the electrode resistance is proven to be linearly dependent on the applied voltage. [ABSTRACT FROM AUTHOR]

Ozone at ground level (O3) is an air pollutant that is formed from primary precursor gases like nitrogen oxides (NOx) and volatile organic compounds (VOCs). It plays a significant role as a precursor to highly reactive hydroxyl (OH) radicals, which ultimately influence the lifespan of various gases in the atmosphere. The elevated surface O3 levels resulting from anthropogenic activities have detrimental effects on both human health and agricultural productivity. This paper provides a comprehensive analysis of the variations in surface O3 levels across various regions in the Indian subcontinent, focusing on both spatial and temporal changes. The study is based on an in-depth review of literature spanning the last thirty years in India. Based on the findings of the latest study, the spatial distribution of surface O3 indicates a rise of approximately 50–70 ppbv during the summer and pre-monsoon periods in the northern region and Indo-Gangetic Plain. Moreover, elevated levels of surface O3 (40–70 ppbv) are observed during the pre-monsoon/summer season in the western, southern, and peninsular Indian regions. The investigation also underscores the ground-based observations of diurnal and seasonal alterations in surface O3 levels at two separate sites (rural and urban) in Kannur district, located in southern India, over a duration of nine years starting from January 2016. The O3 concentration exhibits an increasing trend of 7.91% (rural site) and 5.41% (urban site), ascribed to the rise in vehicular and industrial operations. This review also presents a succinct summary of O3 fluctuations during solar eclipses and nocturnal firework displays in the subcontinent. [ABSTRACT FROM AUTHOR]

Fine particles (PM2.5) have generally been reported as the major contributor to the adverse health effects of air pollution. Lebanon is characterized by a high density of transport, the production of electricity by generators, and a problem of uncontrolled incineration of household waste. For the purpose of this paper, the physico-chemical properties of fine (PM2.5-0.3) and quasi-ultrafine (PM0.3) particulate matter sampled in Southern Lebanon, were studied. Then, an evaluation and comparison of the toxicity of the different extracted fractions from PM (i.e., native PM2.5-0.3 vs. organic extractable matter fraction (OEM2.5-0.3), and non-extractable matter fraction (NEM2.5-0.3)) was performed. Also, an examination of the toxicity of PM0.3 was conducted indirectly through the evaluation of the OEM0.3 harmfulness. The physico-chemical analysis showed that PM0.3 was much more concentrated than PM2.5-0.3 in organic compounds such as polycyclic aromatic hydrocarbons (PAHs) (28-fold) and their nitrated (N-PAHs, 14-fold) and oxygenated (O-PAHs, 10-fold) derivatives. Normal human bronchial epithelial cells (BEAS-2B) were exposed to PM2.5-0.3, its derived fractions (i.e., OEM2.5-0.3 and NEM2.5-0.3), and OEM0.3 before evaluating the global cytotoxicity, metabolic activation of organic compounds, genotoxicity, and inflammatory response. Different responses were observed depending on the considered fraction of particles. The global cytotoxicity showed a pronounced response related to ATP and LDH activities after exposure to the quasi-ultrafine organic extractable matter fraction (OEM0.3). There was no significant induction of the AhR cell-signaling pathway by NEM2.5-0.3. Despite the apparent difference in the kinetics of induction of the toxicological endpoints under study, OEM0.3 provoked a higher overall cytotoxicity and genotoxicity than OEM2.5-0.3 and total PM2.5-0.3. Taken together, these results clearly showed that the finest particles are more damaging to BEAS-2B cells than PM2.5-0.3 because they are richer in organic compounds, thereby inducing more remarkable toxic effects. [ABSTRACT FROM AUTHOR]

In this paper, we present a city-scale (possibly global) air pollution network made of low-cost sensors for particulate matter concentration in the air. The components of the presented system are based on our research and experience from previous studies focused on air quality instruments and sensors for addressing urban air pollution. Sensor nodes are produced locally and distributed over Sarajevo, Bosnia and Herzegovina. The system collects, calibrates, and displays particulate matter concentrations in real-time. In comparison to the available measurements from governmental institutions, our system demonstrated good agreement of measured parameters, with several advantages including, higher resolution in space and time, lower costs, both horizontal and vertical measurements. One of the capabilities of the system is the real-time air pollution city map with animations. By installing multiple sensor nodes over a slope, we receive vertical measurements of temperature, humidity, and particulate matter concentration in real time, which gives a valuable insight into the dynamics of temperature inversion episodes and air pollution below the inversion layer. [ABSTRACT FROM AUTHOR]

The port of Cartagena, south-east Spain, is noted for its intense activity. This paper presents the influence of the COVID-19 pandemic on the recorded levels of six pollutants. Fifteen years of measurements were used, with two objectives. The first was to investigate how these pollutants evolved, together with their usual cycles. The second objective was to ascertain whether the COVID-19 pandemic had an impact on the concentrations recorded. The results showed that nitrogen oxide concentrations remained steady in the first half of the measurement period and decreased in the second half. SO2 concentrations decreased irregularly, whereas O3 and PM10 presented steady concentrations. The annual cycle was observed for nitrogen oxides and O3. Only SO2 evidenced no weekly cycle. Finally, the analysis of pre- and post-pandemic concentrations revealed a sharp decrease in nitrogen oxides, whereas the pandemic was not seen to have had any impact on the other pollutants. In addition, NO2 emerged as the best indicator of human activity—represented by car and maritime traffic—due to its response to the relaxation measures. Finally, Lamb weather types were calculated. The unclassified type was the most frequent. However, the greatest concentration changes were observed for anticyclonic and eastern flow types. [ABSTRACT FROM AUTHOR]

Mobile monitoring is used as an additional tool to collect air quality data at a high spatial resolution and to complement data from fixed air quality stations. Citizens are interested in contributing to air quality monitoring, and while the availability of low-cost air quality sensors can create opportunities to measure the air quality at a high spatial resolution, the data are often of lower quality, and sensors that measure combustion-related aerosols (like black carbon) are not commonly available. Mobile monitoring using a mid-range instrument can fill this gap. We present the results of a mobile BC (black carbon) monitoring campaign performed by citizens in Mechelen as part of a local citizen observatory (CO), Meet Mee Mechelen, initiated as part of the European H2020 project, Ground Truth 2.0. The goal of the study was two-fold: (1) to propose and evaluate a mobile monitoring method (data collection and data processing) to construct pollution maps of BC concentrations and (2) to demonstrate how to organize community-based air quality monitoring to measure both the spatial and temporal variations in air pollution levels. Measurements were taken during peak hours in four campaigns characterized by different meteorological conditions: October–November 2017, February–March 2018, June–July 2018 and September 2018. The results show large spatial and temporal variabilities. Spatial variability is influenced by traffic volume, stop-and-go traffic and also the building environment and the distance of biking paths from road traffic. The four different campaigns show similar spatial patterns, but due to background and meteorological influences, the absolute concentrations differ between seasons. A rescaling method using data from fixed stations in the air quality monitoring network (AQMN) was presented to construct maps representative of longer periods. This paper shows that mobile measurements can be used by CO to assess the spatial variability of air quality in a city. The data can be used to evaluate mobility plans, carry out hot spot detection, evaluate the exposure of cyclists as a function of cycling infrastructure and perform model validation. However, it is important to use high-quality instruments and apply the correct measurement methodology (number of repetitions, season) to obtain meaningful data. [ABSTRACT FROM AUTHOR]

Low‐cost sensing and the Internet of Things (IoT), present new possibilities for unconventional monitoring of environmental parameters. This paper describes a series of intersecting networks of particulate matter sensors that were deployed across the Birmingham conurbation for a 12‐month period. The networks consisted of a combination of commercially available sensors and University developed sensors. Data from these networks were assimilated with data from a third‐party Zephyr deployment, along with the DEFRA AURN network, which was hosted on an open‐source online platform. This nesting of sensor networks allowed for new insights into sensor performance, including the accuracy of a large network to detect regional concentrations and the number of sensors needed for effective monitoring beyond indicative measurements. After comprehensive data validation steps, the sensors were shown to perform well during co‐location with reference instrumentation (exhibiting slopes of 0.74–1.3). The sensors demonstrated good capability of detecting temporal patterns of regional PM2.5 with the mean of the entire sensor network recording an annual mean PM2.5 concentration within 0.2 μgm−3 of the regulatory network annual mean observation. Network‐derived statistics for estimating urban background concentrations compared to a reference site increase in‐line with the number of sensors available, however when assessing this for near‐source concentrations the importance of sensor location rather than the number of sensors is highlighted. Overall, the network provided novel insights into local concentrations, detecting similar hotspots to those identified by a high‐resolution model. The increased spatial coverage afforded by the sensor network has the potential to support higher resolution evaluation of models and provide unprecedented spatial evidence for air pollution management interventions. [ABSTRACT FROM AUTHOR]

Within the neo-institutional theoretical framework, numerous studies have underscored the pivotal role of international non-governmental organizations (EINGOs) in driving global environmental changes. This paper delves into the varying effects of world society connections on air pollution across distinct pollution levels, challenging the assumption that the efforts of EINGOs uniformly reduce air pollution across the world. Using unconditional quantile regression (UQR) analysis, I examine the role of EINGOs in shaping ambient particulate matter pollution across different pollution quantiles from a sample of 158 countries between 1990 and 2015. The findings from this analysis indicate that the impact of world society ties is significant in nations with moderately low (20th and 30th) and moderately high (70th and 80th) levels of air pollution, with no effect in the middle and extreme ends of the pollution spectrum. These results suggest the overestimation of INGOs' ameliorative effects when applied globally. Identifying areas where EINGOs are effective allows for the development of targeted strategies tailored to the unique pollution challenges of different countries. By demonstrating that the impact of EINGOs on air pollution is heterogeneous and not equivalent across all nations, this study contributes to the ongoing debate surrounding their effectiveness on real-world environmental effectiveness. [ABSTRACT FROM AUTHOR]

The paper explores the potential of the main state economic incentive (Conto Termico) designed to promote the use of renewable energy sources for heating and cooling purposes in residential buildings, aiming to reduce primary air emissions from residential biomass combustion (RBC). For this purpose, an emission reduction scenario involving the technological transition of biomass residential heating appliances was implemented in the lowland small‐medium municipalities of the Lombardy region in Italy, where households are connected to the natural gas grid but RBC is often practiced for economic reasons, contributing to severe air pollution problems related especially to particulate matter (PM) emissions. This technological turnover scenario (i.e. all biomass appliances in the area replaced by state‐of‐the‐art pellet appliances) resulted in a significant reduction of particulate matter emissions, while having only a minimal impact on NOx emissions. The incentivized cost for technological turnover (€15/kgPM10 avoided) was in line with the social costs associated with health impacts related to PM10 in a rural setting such as the study area. Given the one‐off investment support provided by a recently adopted national decree (DM 15/09/2022), biomethane emerges as a promising renewable energy alternative to decrease PM and NOx emissions from RBC in Lombardy region, characterized by an extensive natural gas distribution network and potential waste feedstock for biomethane production. Despite the still elevated production costs, an analysis restricted to the incentivized segment reveals that supporting biomethane production through investment incentives is more cost‐effective (€8/kgPM10 avoided) than promoting technological turnover. [ABSTRACT FROM AUTHOR]

Comprehensive surveys conducted at 5-yr intervals were used to estimate sulfur dioxide (SO2) and nitrogen oxides (NOx) emissions from U.S. pulp and paper mills for 1980, 1985, 1990, 1995, 2000, and 2005. Over the 25-yr period, paper production increased by 50%, whereas total SO2 emissions declined by 60% to 340,000 short tons (t) and total NOx emissions decreased approximately 15% to 230,000 t. The downward emission trends resulted from a combination of factors, including reductions in oil and coal use, steadily declining fuel sulfur content, lower pulp and paper production in recent years, increased use of flue gas desulfurization systems on boilers, growing use of combustion modifications and add-on control systems to reduce boiler and gas turbine NOx emissions, and improvements in kraft recovery furnace operations. [ABSTRACT FROM AUTHOR]

Due to concerns with air pollution and climate change, governments and transport operators around the world have engaged in transforming their fossil-fueled vehicles into electric vehicles (EVs). It is essential to build a model for the electrifying process to minimize the operation costs. This paper presents a systematic analytical approach for the electrification of a fire ambulance service station. This approach begins with the selection of suitable EVs to replace the current service vehicles. Subsequently, an in-depth analysis is conducted to determine the practical utilization of EVs at the station. The model proposes two charging strategies: immediate charging upon an EVs' return and smart charging. Based on the chosen EVs and charging strategies, a comprehensive assessment of the load profiles for the planned EV charging station is performed. In accordance with the load profiles, a mathematical model to minimize the infrastructure and operation costs of the charging station is proposed. Various pricing schemes are compared to identify the most efficient pricing scheme for the charging station, and economic analyses of the EVs and traditional ambulance vehicles are proposed in this paper. The test results indicate that the progressive pricing scheme is well suited for immediate charging strategies, whereas smart charging should opt for the time-of-use pricing scheme. Selecting the appropriate pricing scheme has the potential to significantly reduce electric energy costs. [ABSTRACT FROM AUTHOR]