Search

Reservoir heterogeneity is an important factor which should be considered for each operation in oilfields. Acidizing operation is performed to eliminate or reduce the damages of reservoirs. The dissolution of the minerals and rock texture in damaged areas is the main goal of acidizing. However, the existence of high permeable zones through flowing paths results in extra damages and fluid loss. Some additives could be added to the injected acid to avoid these undesirable phenomena. In this research, we added a Zwitterionic sulfonate surfactant to hydrochloric acid (HCl) solution and evaluated the rheological behavior of several compositions of acid‐based viscoelastic surfactant (VES) solutions under various temperature and shear rates. The capability of optimum solution to plug the high permeable zone and divert the acid flow to low permeable zone is examined. The optimum solution was injected into a parallel sandpacked system with different permeabilities at various flow rates (1, 3 and 5 cc/min). It was observed that the injection rate of 3 cc/min has the most efficiency to reduce the heterogeneity. Besides the tendency of VES based solutions for altering wettability of rock to more water‐wet condition is observed. The findings of this study can help the better understanding of practical application of VES in acidizing through heterogeneous reservoirs. Besides, effective parameters for such application are determined. [ABSTRACT FROM AUTHOR]

An oil-based drilling fluid should be stable and tolerant to high temperatures for use in deep drilling. An invert emulsion of water in oil is a good choice as an oil-based drilling fluid which is a mixture of a solid phase and two immiscible liquid phases stabilized by a polymeric surfactant. In deep drilling, due to high temperatures, the polymeric surfactant degrades and a phase separation occurs. Here, octadecyltrimethoxysilane-modified silica nanoparticles were used to form a stable invert emulsion of water in oil for the drilling fluid model which resulted in a milky fluid with the formation of 60 µm water droplets. In addition, rheological study showed that using hydrophobic silica nanoparticles resulted in a stable water in oil invert emulsion with desired properties for a drilling fluid that can be modified by adjusting the nanoparticle nature and content. Aging experiments at 120 °C indicated that they also have good stability at high temperatures for challenging drilling operations. [ABSTRACT FROM AUTHOR]