Search

Space-time adaptive processing (STAP) is an important method of clutter suppression that requires adequate training samples. For an airborne conformal array radar, conventional STAP methods do not have enough training samples to acquire good performance due to the range dependent clutter caused by geometry and the problem of polarization. Sparse-recovery-based STAP (SR-STAP) methods have garnered significant attention in the past few decades because they only require a small number of training samples. Sparse Bayesian Learning (SBL) methods have seen increasing amounts of development due to its robust, self-regularizing nature and because it is not sensitive to user parameters, but it converges slowly. In this paper, a novel fast SBL (NFSBL) method is put forward to increase the rate of convergence. To minimize the SBL penalty function, the proposed method introduces the conjugate function to construct a surrogate function. Additional solution sparsity will be achieved through iteratively minimizing the surrogate function. Then, from the proposed method, we could obtain a more accurate clutter plus noise covariance matrix. Numerical simulation results express that this method could acquire better performance of STAP and improvement in convergence and computational complexity for a conformal array. [ABSTRACT FROM AUTHOR]

This article presents detailed geometric analyses of ground clutter in bistatic passive airborne radars. Analytic closed-form solutions are derived for finding the intersection of iso-ranges and iso-velocities. This allows clutter bistatic coordinates to be easily converted to its Cartesian coordinates. Based on those solutions, a theoretical clutter map in the bistatic coordinates can be calculated assuming uniform clutter distribution on the Earth’s surface. This is done by first converting a resolution cell in the bistatic coordinates into a corresponding cell in the Cartesian coordinates. Next, the power distribution in the bistatic coordinates is calculated taking into account range dependency, incident angles, and the radiation patterns of the transmitter and the receiver. The aim of this analysis is to characterize clutter in terms of expected mean power map rather than in terms of statistical distribution. The obtained results provide insights into the expected characteristics of clutter, which can be helpful in designing signal processing algorithms for ground moving target indication (GMTI) and synthetic aperture radar (SAR). The theoretical clutter distribution on the range-velocity map is compared with real-life data acquired with a Digital Video Broadcasting–Terrestrial (DVB-T)-based passive radar and good agreement between theory and measurement is presented. [ABSTRACT FROM AUTHOR]

Range-dependent clutter suppression is a challenging problem in nonsidelooking, bistatic, and conformal antenna array airborne radar, especially in the presence of range ambiguity. Superimposed stepped frequency (SSF) radar employs a small frequency increment across the stepped signals in each pulse, which introduces a dimension related to slant range. In this article, an airborne radar framework is established, which takes SSF signal as the transmit waveform. Thus, a two-stage adaptive clutter suppression method is proposed, which utilizes the degrees of freedom in range, space, and time domains provided by airborne SSF radar. In the first stage, the secondary range dependence compensation approach is adopted to distinguish the clutter of each range region in the carrier frequency domain. Then, a target-free covariance matrix is estimated by the compensated data, and the covariance matrix is used for the range-ambiguous clutter separation in the carrier frequency domain. Thus, the space-time snapshot of each range region can be extracted. In the second stage, a clutter segmentation processing method is devised for residual clutter suppression. For the near-range unambiguous clutter, the traditional clutter compensation approach is applied to further align the spectrum distribution of clutter, while the conventional space-time adaptive processing is utilized to suppress far-range clutter directly. Since the proposed method takes full advantage of the range dimension and the two stages of adaptive processing are data-dependent, excellent clutter suppression performance can be obtained. The proposed method can also extract the real range of the target since each range region is processed separately. Simulation results demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

An extended Neyman–Pearson detector based on the combination of a traditional matched and wavelet filter in pulsed monostatic radar was proposed in this paper. Its properties were compared with properties of the cell average constant false alarm radar detector in the presence of white noise. The properties of detectors were examined in the receiver operating characteristic curves, parameter space. It consisted of false detection rate and the rate of true positive detected targets. In order to investigate the influence of temperature, the new parameter space was constructed: the temperature versus the rate of true positive detected targets. The traditional Neyman–Pearson detector based on a matched filter was fully operational and superior in the temperature range between 290 K and 350 K. Below this temperature range, its performance is completely degraded. It has been shown that by adding a wavelet filter, it can extend this temperature range between 260 K and 350 K. In the temperature range, where all detectors are fully operational, extended and classic Neyman–Pearson detectors had better performance than constant false alarm radar detector in the receiver operating characteristic curves' parameter space. [ABSTRACT FROM AUTHOR]

Passive operation is an important operational concept for future airborne radar platforms. Successful target detection requires an understanding of the underlying clutter statistics in order to set the detection threshold accurately. In addition, clutter statistics are important for modeling of passive radar performance and simulation of passive bistatic radar to aid in the development of new target detection algorithms. In this article, the clutter statistics of data from an airborne platform are studied over a range of bistatic geometries and receive polarizations. The illuminator is a digital video broadcast-terrestrial (DVB-T) station and the collected data spans both ground and maritime regions. The key contributions include a study of amplitude statistics using a number of common distributions and understanding the impact of the reference signal quality in terms of the clutter statistics. [ABSTRACT FROM AUTHOR]

Generally ground clutter has serious range dependence and range ambiguity in the forward-looking array airborne radar system under a high pulse repetition frequency (PRF) system. In this work, a range ambiguous clutter suppression method based on transmitting beam main lobe correction for the FDA MIMO radar is proposed. Firstly, this method uses the designed transmission pulse weights to compensate for the initial phases formed by the accumulation of frequency increments between pulses, so as to solve the problem that the main lobe high gain illuminated angle is inconsistent between the MIMO equivalent transmitting beampattern pulses synthesized at the receiving in the traditional FDA MIMO system. Secondly, by restoring and compensating received echoes, the influence of the main lobe correction weights of the transmitting signal is eliminated. Finally, through the characteristics of transmitter correction compensation to distinguish different range ambiguous clutters, the echoes from the range ambiguous areas can be discretely distributed in the power spectrum while preserving the signal echoes in the observation area. Thus range ambiguous clutter suppression is realized. The simulation results show that the proposed method can improve the clutter suppression performance compared with the MIMO and linear frequency increment FDA radar. [ABSTRACT FROM AUTHOR]

Medium pulse repetition frequency (MPRF) is an important mode in airborne radar system. Since MPRF mode brings both Doppler and range ambiguities, it causes difficulty for the airborne radar to suppress ground or sea clutter. In recent years, it has been pointed out that the frequency diverse array (FDA) radar is capable of separating the range ambiguous clutter, which is helpful for the airborne radar in detecting weak moving targets originally buried in ambiguous clutter. To further improve the ambiguous clutter separation performance, an enhanced pre-STAP beamforming for range ambiguous clutter suppression is proposed for the vertical FDA planar array in this paper. With consideration of range dependence of the vertical spatial frequency, a series of pre-STAP beamformers are designed using a priori knowledge of platform and radar parameters. The notches of the beamformers are aligned with the ambiguous clutter to extract echoes from desired range region while suppressing clutter from ambiguous range regions. The notches can be widened by using covariance matrix tapering technique and the proposed method can improve the performance of range ambiguous clutter separation with limited degrees-of-freedom (DOFs). Simulation examples show the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]