Search

Abstract: The enzymatic hydrolysis of sugarcane bagasse was investigated by treating a peroxide–alkaline bagasse with a pineapple stem juice, xylanase and cellulase. Pre-treatment procedures of sugarcane bagasse with alkaline hydrogen peroxide were evaluated and compared. Analyses were performed using 24 factorial designs, with pre-treatment time, temperature, magnesium sulfate and hydrogen peroxide concentration as factors. The responses evaluated were the yield of cellobiose and glucose released from pretreated bagasse after enzymatic hydrolysis. The results show that the highest enzymatic conversion was obtained for bagasse using 2% hydrogen peroxide at 60°C for 16h in the presence of 0.5% magnesium sulfate. Bagasse (5%) was treated with pineapple stem extract, which contains mixtures of protease and esterase, in combination with xylanase and cellulase. It was observed that the amount of glucose and cellobiose released from bagasse increased with the mixture of enzymes. It is believed that the enzymes present in pineapple extracts are capable of hydrolyze specific linkages that would facilitate the action of digesting plant cell walls enzymes. This increases the amount of glucose and other hexoses that are released during the enzymatic treatment and also reduces the amount of cellulase necessary in a typical hydrolysis. [ABSTRACT FROM AUTHOR]

Abstract: A two-stage pretreatment method was proposed and tested for deconstruction of recalcitrant Miscanthus. During a 1st pretreatment at 50°C, 1.0–4.0% alkaline peroxide solutions were used to partially remove hemicellulose and lignin. The remaining solids were subjected to a 2nd pretreatment at 121°C with electrolyzed water. Using 15 filter paper units of cellulase per gram cellulose, a digestibility of 95% was achieved by the two-stage method, which was higher than 81% obtained from a 1% H2SO4 pretreatment (200°C, 8min). A mass balance for the two-stage process showed that 63% hemicellulose and 64% lignin were removed from the Miscanthus samples after the 1st pretreatment. The Scanning Electron Microscopy images and Fourier Transform Infrared Spectroscopy spectra revealed that after the 1st pretreatment, crystalline cellulose fibers were partially exposed and the linkages between residual lignin and hemicellulose disappeared. After the 2nd pretreatment, cellulose fibers were completely exposed even with cracks developed. [Copyright &y& Elsevier]