Search

Remote Sensing Image Object Detection (RSIOD) faces the challenges of multi-scale objects, dense overlap of objects and uneven data distribution in practical applications. In order to solve these problems, this paper proposes a YOLO-ACPHD RSIOD algorithm. The algorithm adopts Adaptive Condition Awareness Technology (ACAT), which can dynamically adjust the parameters of the convolution kernel, so as to adapt to the objects of different scales and positions. Compared with the traditional fixed convolution kernel, this dynamic adjustment can better adapt to the diversity of scale, direction and shape of the object, thus improving the accuracy and robustness of Object Detection (OD). In addition, a High-Dimensional Decoupling Technology (HDDT) is used to reduce the amount of calculation to 1/N by performing deep convolution on the input data and then performing spatial convolution on each channel. When dealing with large-scale Remote Sensing Image (RSI) data, this reduction in computation can significantly improve the efficiency of the algorithm and accelerate the speed of OD, so as to better adapt to the needs of practical application scenarios. Through the experimental verification of the RSOD RSI data set, the YOLO-ACPHD model in this paper shows very satisfactory performance. The F1 value reaches 0.99, the Precision value reaches 1, the Precision-Recall value reaches 0.994, the Recall value reaches 1, and the mAP value reaches 99.36 % , which indicates that the model shows the highest level in the accuracy and comprehensiveness of OD. [ABSTRACT FROM AUTHOR]

Disjoint paths are defined as paths between the source and destination nodes where the intermediate nodes in any two paths are disjoint. They are helpful in fault-tolerance routing and securing message distribution in the network. Several research papers were proposed to solve the problem of finding disjoint paths for a variety of interconnection networks such as Hypercube, Generalized Hypercube, Mesh, Torus, Gaussian, Eisenstein–Jacobi, and many other topologies. In this research, we have developed a general algorithm that constructs maximal node-to-node disjoint paths for symmetric networks where all paths are shortest. The algorithm presented in this paper outperforms other algorithms in finding not only the disjoint paths but shortest and maximal disjoint paths with a complexity of O (n 2) . In addition, we have simulated the proposed algorithm on different networks. The solution of unsolved problem in Cube-Connected-Cycles is given in the simulation results. [ABSTRACT FROM AUTHOR]

The Chinese Postman Problem (CPP) is a well-known optimization problem involving determining the shortest route, modeling the system as an undirected graph, for delivering mail, ensuring all roads are traversed while returning to the post office. The Directed Chinese Postman Problem (DCPP) extends the Chinese Postman Problem (CPP), where the underlying graph representing the system incorporates exclusively directed edges. Similarly to CPP, this problem has plenty of applications in route optimization, interactive system analysis, and circuit design problems. However, due to the added constraint (directionality of edges), DCPP results are more challenging to solve. Although methods to solve it in literature are proposed, typically by using minimum-cost-flow algorithms, the meta-heuristics approaches proposed to deal with it are very limited. In this paper, we propose an innovative meta-heuristic approach to solve DCPP by using an ant colony optimization (ACO) algorithm, i.e., an algorithm that simulates in a simplified way the behavior of some species of ants to solve optimization problems. The efficiency of our ant colony optimization for solving the Directed Chinese Postman Problem (ACO-DCPP) is measured by comparing the ACO outcomes with the results obtained by a recursive algorithm that explores all the possible solutions. Results show that ACO-DCPP is stable and gets the global optimum frequently by using an extremely limited number of solutions explored. [ABSTRACT FROM AUTHOR]

Classic multidimensional scaling (MDS) and scaling by majorizing a complex function (SMACOF) are well-known centralized algorithms that are used to solve MDS problem. In this paper, we present a distributed algorithm for solving MDS problem. Estimations of coordinates are performed concurrently under the assumption that each item knows only its own position and its distances from its neighbors and their approximated present locations. The update process is done by calculating the average of the current coordinate of each object and its projections on the solution spaces allocated to it by its neighbors. We apply the method to the problem of sensor localization and obtain numerical results that demonstrate the efficacy of our suggested strategy. [ABSTRACT FROM AUTHOR]

Triangulation is widely used to represent models of real objects in digital form, and often, in order to get the desired model, we need to triangulate it from data of another kind, for example, from a voxel model. There are methods that allow one to do it, but the resulting triangulation does not always have the desired quality. One way to solve this problem is triangulation simplification algorithms. However, they have disadvantages; in particular, in some cases they can destroy the model topology during the simplification process, which leads to the rejection of the simplification of the tetrahedral mesh in some local area. In this paper, we will consider the naive method of triangulation simplification using edge contraction, its shortcomings, and propose its modification that allows us to contract any edges without topology violations. [ABSTRACT FROM AUTHOR]

The use of evolutionary algorithms to solve constrained multi-objective optimization problems (CMOPs) with various characteristics and difficulties obtains considerable attention. Most of existing methods tend to introduce an alternate formulation to simplify the original problem and facilitate the solving, which corresponds to the methodology of multiform optimization. Inspired by multiform optimization, this paper proposes a multi-stage multiform optimization framework to solve CMOPs. To prevent the population from falling into local optima in the early stages of evolution, we construct an alternate formulation that ignores all constraints. Meanwhile, in order to utilize high-quality infeasible solutions to explore more feasible regions, we construct another alternate formulation by using a constraint relaxation technique that analyzes the relationships between constraints, evaluating important constraints, and ignoring unimportant constraints. The two formulations provide exclusive and complementary searches in the objective space with the help of knowledge transfer. As both alternate formulations are designed to find the unconstrained Pareto front in the early stages and the final goal must be finding the constrained Pareto front, a multi-stage strategy is devised. Different numbers of alternate formulations are used at different stages to allocate computational resources more effectively. In addition, we propose a hybrid operator strategy to improve the performance of the algorithm by combining the advantages of different operators. Then, 33 instances and 18 real-world CMOPs are selected to evaluate the performance of the algorithm. Experimental results demonstrate the superiority or competitiveness of the proposed approaches. [ABSTRACT FROM AUTHOR]

Many problems of substantial current interest in machine learning, statistics, and data science can be formulated as sparse and low-rank optimization problems. In this paper, we present the nonconvex exterior-point optimization solver (NExOS)—a first-order algorithm tailored to sparse and low-rank optimization problems. We consider the problem of minimizing a convex function over a nonconvex constraint set, where the set can be decomposed as the intersection of a compact convex set and a nonconvex set involving sparse or low-rank constraints. Unlike the convex relaxation approaches, NExOS finds a locally optimal point of the original problem by solving a sequence of penalized problems with strictly decreasing penalty parameters by exploiting the nonconvex geometry. NExOS solves each penalized problem by applying a first-order algorithm, which converges linearly to a local minimum of the corresponding penalized formulation under regularity conditions. Furthermore, the local minima of the penalized problems converge to a local minimum of the original problem as the penalty parameter goes to zero. We then implement and test NExOS on many instances from a wide variety of sparse and low-rank optimization problems, empirically demonstrating that our algorithm outperforms specialized methods. [ABSTRACT FROM AUTHOR]

In industry, the task of defect classification and defect localization is an important part of defect detection system. However, existing studies only focus on one task and it is difficult to ensure the accuracy of both tasks. This paper proposes a defect detection system based on improved Yolo_v4, which greatly improves the detection ability of minor defects. For K_Means algorithm clustering prianchors question with strong subjectivity, the paper proposes the Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm to determine the number of Anchors. To solve the problem of low detection rate of small targets caused by insufficient reuse rate of low-level features in CSPDarknet53 feature extraction network, this paper proposes an ECA-DenseNet-BC-121 feature extraction network to improve it. And the Dual Channel Feature Enhancement (DCFE) module is proposed to improve the local information loss and gradient propagation obstruction caused by quad chain convolution in PANet networks to improve the robustness of the model. The experimental results on the fabric surface defect detection datasets show that the mAP of the improved Yolo_v4 is 98.97%, which is 7.67% higher than SSD, 3.75% higher than Faster_RCNN, 10.82% higher than Yolo_v4 tiny, and 5.35% higher than Yolo_v4, and the detection speed reaches 39.4 fps. It can meet the real-time monitoring needs of industrial sites. [ABSTRACT FROM AUTHOR]

In this paper, Protist algorithm (PA) and Otocyon megalotis optimization algorithm (OOA) are applied to solve the power loss lessening problem. Protist Algorithm (PA) is modelled based on the Protist's natural activities. Protist exists in moist places. The leading nutritious phase is Plasmodium, the energetic and vibrant phase of Protist. In this segment, the organic substance in Protist search for food in surroundings and conceals enzymes for digestion. Natural actions of Otocyon megalotis are emulated to design the OOA approach. In the projected OOA searching of regions in exploration, for foodstuff the Otocyon megalotis mark the prey in the space is indicated as a global exploration. Real power loss reduction and Voltage stability enhancement are the key objectives of the paper. To solve the problem, Protist algorithm (PA) and Otocyon megalotis optimization algorithm. In the course of the migration procedure, the anterior end outspreads and interconnected arterial system that authorize cytoplasm to stream inside. Then, mutation and cross-over probability are employed to augment the performance of the Protist algorithm (PA). With this integration engendering of the population is done. Mutation classes the population exploration agents (PN) in uphill order conferring to the agents appropriateness (fitness) cost. Consequently, the technique splits the organized agents into three fragments rendering to their fitness value. In which PN/3 denotes to the population possess pre-eminent (aptness) fitness values, subsequently with second pre-eminent and poorest aptness (fitness) values. Then, in this paper, Otocyon megalotis optimization algorithm (OOA) is applied for solving the Power loss lessening problem. In the subsequent segment, navigate during the haunt to seal prey previous to the hit was replicated as a local search. In exploration, the data obtained is shared to all the associates of the family unit for continued existence and growth. Examination of the nearby terrain is modelled with reference to the fitness of all entities. Most excellent entity has investigated the majority fascinating terrain and it will be shared with family unit of Otocyon megalotis. Primarily, Otocyon megalotis show that it not involved in hunting. Conversely, as soon as moving near to prey Otocyon megalotis will perform the attack in quick mode. This approach imitated and designed in the local search segment. Authenticity of the Protist algorithm (PA) and Otocyon megalotis optimization algorithm (OOA) is corroborated in 23 benchmark functions, IEEE 30, 57, 300 and 354 test systems. Power Loss reduction achieved with voltage stability enhancement. Real power loss reduction attained. Both the Protist algorithm (PA) and Otocyon megalotis optimization algorithm (OOA) performed well in solving the Power loss reduction problem. [ABSTRACT FROM AUTHOR]

We study a class of chance constrained programs (CCPs) where the underlying distribution is modeled by a Gaussian mixture model. As the original work, Hu et al. (IISE Trans 54(12):1117–1130, 2022. https://doi.org/10.1080/24725854.2021.2001608) developed a spatial branch-and-bound (B &B) algorithm to solve the problems. In this paper, we propose an enhanced procedure to speed up the computation of B &B algorithm. We design an enhanced pruning strategy that explores high-potential domains and an augmented branching strategy that prevents redundant computations. We integrate the new strategies into original framework to develop an enhanced B &B algorithm, and illustrate how the enhanced algorithm improves on the original approach. Furthermore, we extend the enhanced B &B framework to handle the CCPs with multiple chance constraints, which is not considered in the previous work. We evaluate the performance of our new algorithm through extensive numerical experiments and apply it to solve a real-world portfolio selection problem. [ABSTRACT FROM AUTHOR]

The sparse triangular solver (SpTRSV) is mostly used for scientific and engineering applications. The structured-grid triangular solver of regular dependencies (STRSV) is a special kind of SpTRSV. Some general SpTRSVs that disregards the regularity of the matrix are unsuitable for solving this problem. This paper proposes an efficient parallel algorithm for STRSV on the SW26010 (a kind of China independently designed many-core processors), namely swStructTRSV. The algorithm makes full use of the fine-grained and low latency communication characteristics of the SW26010 to reduce the waiting time for synchronization, maximizes the regularity of access to improve memory access bandwidth, and achieves overlap between memory access and computation simultaneously. Moreover, the idea of the algorithm can be extended to incomplete LU factorization (ILU factorization) because of consistent dependencies. The experimental results on a core group(8 * 8 network composed of 64 cores) of SW26010 show that swStructTRSV can achieve an average speedup of over 30 in the sequential version. swStructTRSV on SW26010 achieves solving speedups of 2.2 and 6.3 over the fast STRSV (fSpTRSV) previously implemented on SW26010 and MKL on Intel Xeon Gold 6132, respectively. swStructTRSV significantly outperforms cuSparse on NVIDIA TITAN RTX in terms of overall execution time. [ABSTRACT FROM AUTHOR]

The Manta Ray Foraging Optimization Algorithm (MRFO) is a metaheuristic algorithm for solving real-world problems. However, MRFO suffers from slow convergence precision and is easily trapped in a local optimal. Hence, to overcome these deficiencies, this paper proposes an Improved MRFO algorithm (IMRFO) that employs Tent chaotic mapping, the bidirectional search strategy, and the Levy flight strategy. Among these strategies, Tent chaotic mapping distributes the manta ray more uniformly and improves the quality of the initial solution, while the bidirectional search strategy expands the search area. The Levy flight strategy strengthens the algorithm's ability to escape from local optimal. To verify IMRFO's performance, the algorithm is compared with 10 other algorithms on 23 benchmark functions, the CEC2017 and CEC2022 benchmark suites, and five engineering problems, with statistical analysis illustrating the superiority and significance of the difference between IMRFO and other algorithms. The results indicate that the IMRFO outperforms the competitor optimization algorithms. [ABSTRACT FROM AUTHOR]

The optimal operation of reservoir groups is a strongly constrained, multi-stage, and high-dimensional optimization problem. In response to this issue, this article couples the standard Pelican optimization algorithm with adaptive ε constraint methods, and further improves the optimization performance of the algorithm by initializing the population with a good point set, reverse differential evolution, and optimal individual t-distribution perturbation strategy. Based on this, an improved Pelican algorithm coupled with adaptive ε constraint method is proposed (ε-IPOA). The performance of the algorithm was tested through 24 constraint testing functions to find the optimal ability and solve constraint optimization problems. The results showed that the algorithm has strong optimization ability and stable performance. In this paper, we select Sanmenxia and Xiaolangdi reservoirs as the research objects, establish the maximum peak-cutting model of terrace reservoirs, apply the ε-IPOA algorithm to solve the model, and compare it with the ε-POA (Pelican algorithm coupled with adaptive ε constraint method) and ε-DE (Differential Evolution Algorithm) algorithms, the results indicate that ε. The peak flow rate of the Huayuankou control point solved by the IPOA algorithm is 12,319 m3/s, which is much lower than the safe overflow flow rate of 22,000 m3/s at the Huayuankou control point, with a peak shaving rate of 44%, and other algorithms do not find effective solutions meeting the constraint conditions. This paper provides a new idea for solving the problem of flood control optimal operation of cascade reservoirs. [ABSTRACT FROM AUTHOR]

The optimal operation of reservoir groups is a strongly constrained, multi-stage, and high-dimensional optimization problem. In response to this issue, this article couples the standard Pelican optimization algorithm with adaptive ε constraint methods, and further improves the optimization performance of the algorithm by initializing the population with a good point set, reverse differential evolution, and optimal individual t-distribution perturbation strategy. Based on this, an improved Pelican algorithm coupled with adaptive ε constraint method is proposed (ε-IPOA). The performance of the algorithm was tested through 24 constraint testing functions to find the optimal ability and solve constraint optimization problems. The results showed that the algorithm has strong optimization ability and stable performance. In this paper, we select Sanmenxia and Xiaolangdi reservoirs as the research objects, establish the maximum peak-cutting model of terrace reservoirs, apply the ε-IPOA algorithm to solve the model, and compare it with the ε-POA (Pelican algorithm coupled with adaptive ε constraint method) and ε-DE (Differential Evolution Algorithm) algorithms, the results indicate that ε. The peak flow rate of the Huayuankou control point solved by the IPOA algorithm is 12,319 m3/s, which is much lower than the safe overflow flow rate of 22,000 m3/s at the Huayuankou control point, with a peak shaving rate of 44%, and other algorithms do not find effective solutions meeting the constraint conditions. This paper provides a new idea for solving the problem of flood control optimal operation of cascade reservoirs. [ABSTRACT FROM AUTHOR]

In this paper, we propose a Riemannian version of the difference of convex algorithm (DCA) to solve a minimization problem involving the difference of convex (DC) function. The equivalence between the classical and simplified Riemannian versions of the DCA is established. We also prove that under mild assumptions the Riemannian version of the DCA is well defined and every cluster point of the sequence generated by the proposed method, if any, is a critical point of the objective DC function. Some duality relations between the DC problem and its dual are also established. To illustrate the algorithm's effectiveness, some numerical experiments are presented. [ABSTRACT FROM AUTHOR]

Fabric defect detection is an important part of the textile industry, aiming at the problems of many types of fabric defects, small size defects and unbalanced samples, an improved YOLOv5 fabric defect detection algorithm, FD-YOLOv5, was proposed. First, the coordinate attention module is embedded in the YOLOv5 backbone network structure to replace the bottleneck structure in the original network model. While reducing the amount of parameters and calculation, it enhances the ability of the network to extract features and improves the model's ability to detect small target defects. Secondly, a smoother Mish activation function is used in the original model convolution structure for model training, which improves the nonlinear expression ability of the model; the SIoU loss function considering the direction of the anchor box is used to improve the convergence speed and detection accuracy of the model. Finally, combining the focal loss and GHM loss functions as the target confidence loss function to solve the problem of sample imbalance in the fabric defect dataset. The experimental results based on the public fabric defect dataset of Aliyun TianChi shows that the mAP@.5 and mAP@.5:.95 of the improved algorithm are 65.1% and 30.4%, respectively, which are 8.3% and 3.2% higher than the original model, respectively, and the parameter amount, calculation amount and weight of the model are reduced by 8.4%, 11.2% and 14.3%, respectively, compared with the original model. Even compared with the state-of-the-art YOLOv7 model, the mAP@.5 value of the proposed model is improved by 6.5%. Although the FPS value is lower than YOLOv7 model, it also achieves a detection speed of 79 frames per second, which can meet the real-time demand. The experimental results demonstrate the effectiveness of the method in this paper, which can provide a reference for the automatic detection method of fabric defects. [ABSTRACT FROM AUTHOR]

Identifying the location of the sensor nodes is a challenging aspect of Wireless Sensor Networks (WSNs) in a distributed environment. It is vital to understand where data and events come from when sensor nodes collect data and report on them. This paper uses a nature-inspired Jaya algorithm to estimate the location coordinates of target nodes in a distributed architecture of WSNs. The Jaya algorithm handles the nonlinear optimization problem of node localization in a randomly distributed sensor node configuration. The range-based, Received Signal Strength Indicator method is used for the distance estimation. MATLAB software is used to assess the proposed work, and a comparison is made with the Particle Swarm Optimization, Krill Herd Optimization, and Salp Swarm Algorithm based node localization algorithms in terms of localization error and computation time. The localization error analysis is done for the different numbers of anchor nodes and different values of degree of irregularity to verify the effectiveness of the proposed work. [ABSTRACT FROM AUTHOR]

Quantum approximate optimization algorithms are hybrid quantum-classical variational algorithms designed to approximately solve combinatorial optimization problems such as the MAX-CUT problem. In spite of its potential for near-term quantum applications, it has been known that quantum approximate optimization algorithms have limitations for certain instances to solve the MAX-CUT problem, at any constant level p. Recently, the recursive quantum approximate optimization algorithm, which is a non-local version of quantum approximate optimization algorithm, has been proposed to overcome these limitations. However, it has been shown by mostly numerical evidences that the recursive quantum approximate optimization algorithm outperforms the original quantum approximate optimization algorithm for specific instances. In this paper, we analytically prove that the recursive quantum approximate optimization algorithm is more competitive than the original one to solve the MAX-CUT problem for complete graphs with respect to the approximation ratio. [ABSTRACT FROM AUTHOR]

Popular Secp256k1 and Schnorr algorithms offer strong security in current Blockchains. However, they are vulnerable to quantum attacks. To solve this problem, several quantum-resistant algorithms have been proposed. However, the performance evaluations and tangible analyses of these algorithms on current Blockchains have not been studied yet. In this context, a performance analysis of quantum-resistant algorithms on a Blockchain can provide valuable insight into the efficiency of quantum-resistant algorithms in real-world scenarios. To address this need, we prototyped and analyzed a quantum-resistant Blockchain using the Falcon algorithm. Falcon is selected because it provides smaller signature and key size compared to Crystals-Dilithium and Sphincs+. We then measured in real-time the key size, transaction signature size, and transaction verification time. The paper also discusses the potential scalability limitations of the proposed quantum-resistant Blockchain and suggests an approach to select quantum-resistant algorithms based on different Blockchain use cases. Our approach and benchmark results have implications for the future development and adoption of quantum-resistant Blockchains. [ABSTRACT FROM AUTHOR]

This paper reports of theoretical and computational results related to an original concept of consensus clustering involving what we call the projective distance between partitions. This distance is defined as the squared difference between a partition incidence matrix and its image over the orthogonal projection in the linear space spanning the other partition incidence matrix. It appears, provided that the ensemble clustering is of a sufficient size, agglomerate clustering with the semi-average within-cluster similarity criterion effectively solves the problem of consensus partition and, moreover, of the number of clusters in it. [ABSTRACT FROM AUTHOR]

Metaheuristic algorithms, widely applied across various domains due to their simplicity and strong optimization capabilities, play a crucial role in problem-solving. While the Aquila Optimizer is recognized for its effectiveness, it often exhibits slow convergence rates and susceptibility to local optima in certain scenarios. To address these concerns, this paper introduces an enhanced version, termed Tent-enhanced Aquila Optimizer (TEAO). TEAO incorporates the Tent chaotic map to initialize the Aquila population, promoting a more uniform distribution within the solution space. To balance exploration and exploitation, novel formulas are proposed, accelerating convergence while ensuring precision. The effectiveness of the TEAO algorithm is validated through a comprehensive comparison with 14 state-of-the-art algorithms using 23 classical benchmark test functions. Additionally, to assess the practical feasibility of the approach, TEAO is applied to six constrained engineering problems and benchmarked against the performance of the same 14 algorithms. All experimental results consistently demonstrate that TEAO outperforms other advanced algorithms in terms of solution quality and stability, establishing it as a more competitive choice for optimization tasks. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicles are useful tools for many applications. However, autonomous path planning for Unmanned Aerial Vehicles in unfamiliar environments is a challenging problem when facing a series of problems such as poor consistency, high influence by the native controller of the Unmanned Aerial Vehicles. In this paper, we investigate reinforcement learning-based autonomous local path planning methods for Unmanned Aerial Vehicles with high autonomous decision-making capability and locally high portability. We propose an autonomous local path planning algorithm based on the TD3 strategy to solve the problem of local obstacle avoidance and path planning in unfamiliar environments using autonomous decision-making of Unmanned Aerial Vehicles. The simulation results on Gazebo show that our method can effectively realize the autonomous local path planning task for Unmanned Aerial Vehicles, the success rate of path planning with our method can reach 93% under the interference of no obstacles, and 92% in the environment with obstacles. Finally, our method can be used for autonomous path planning of Unmanned Aerial Vehicles in unfamiliar environments. [ABSTRACT FROM AUTHOR]

The image stitching process often produces many undesirable effects. Solving problems such as discontinuity and dislocation of pictures has always been the focus of people's research. From the perspective of human vision, this dislocation situation can be easily perceived and found. In this paper, we propose a stitching strategy based on the human visual system (HVS) and scale-invariant feature transform (SIFT) algorithm. We preprocess the brightness difference and contrast of the stitched images, combining SIFT algorithm and HVS to divide the overlapping areas of the stitched images and establish an attribute relationship model. We use dynamic programming to find the optimal seamline according to the attribute relationship model, and the final result makes the optimal seamline almost invisible under the discriminative vision of human eyes. The experimental results show that our method has more advantages in the HVS. [ABSTRACT FROM AUTHOR]

This paper presents an effective approach for solving economic load dispatch problems contemplating the scheduling a set of thermal generating units to produce a specific power at low consumption costs. These problems can be thought of as nonlinear, non-convex, and highly constrained optimization problems with a large number of local minima. To cope with the above issues in solving such problems, a new meta-heuristic named capuchin search algorithm was adopted. To boost the search performance of this algorithm as well as to mitigate its early convergence and regression to the local optimum, it was hybridized with another algorithm and improved using several positive amendments. First, a memory element was added to this algorithm to ameliorate its position and velocity update mechanisms in order to exploit the most encouraging candidate solutions. Second, two adaptive parametric functions were used to manage the exploration and exploitation features of this algorithm and balance them appropriately. Finally, the hybridization was made using the gradient-based optimizer to strengthen the intensification ability of this algorithm and balance its searching ability to fulfill sensible search performance. The proficiency of the proposed algorithm was divulged by assessing it on computationally difficult economic load dispatch problems under 6 different tests with a generator of 3, 13, 40, 80, and 140 units, each with different constraints and load conditions. The proposed algorithm provided the best performance among many other competitors. Its superiority and practicality were revealed by obtaining optimal solutions for large-scale test cases such as 40-unit and 140-unit test systems. [ABSTRACT FROM AUTHOR]

The paper proposes a new initial disparity estimation algorithm based on sparse local feature matching and one-dimensional dynamic programming. The new algorithm solves the problems of long calculation time, high memory consumption and unknown search range of disparity in the classical pyramid SGM dense matching algorithm. Based on the initial disparity, the final accurate disparity can be got by using SGM algorithm within fixed little search range. The new algorithm is more accurate than the traditional SGM algorithm (by testing on a public data set, the accuracy of new algorithm is 1.57% higher than traditional SGM algorithm), it does not need to artificially estimate the search range of disparity, and it is suitable for implementation on FPGA. Based on the new algorithm, the CPU-FPGA collaborative high-speed dense matching for high-resolution aerial images is realized. The average speed of dense matching on CPU-FPGA is 31.81times faster than the original SGM algorithm and 6.46 times faster than pyramid SGM algorithm. The speed of accurate matching by FPGA is 4.75 times faster than running on GPU. [ABSTRACT FROM AUTHOR]

In order to improve tracking accuracy of time-varying sparse signals, a sparse state Kalman filter algorithm based on Kalman gain matrix is proposed in this paper. Under the constraint of sparse state, minimizing the mean square error and solving the optimization problem by using the symmetrical alternating direction multiplier method (symmetrical ADMM), while keeping the update expression of state estimation unchanged, a Kalman gain matrix is obtained which can make the state estimation sparse. In addition, this paper also discusses two different sparse constraints which are L1 norm constraint and cardinality function constraint. The proposed algorithm can be implemented under the framework of conventional Kalman filter algorithm, no need to introduce additional frameworks. Two groups of dynamic signal models, a slow change of signal and a random walk of nonzero elements, are simulated. Simulation results show that the proposed algorithm can improve the tracking accuracy of conventional Kalman filter algorithm for time-varying sparse signal. [ABSTRACT FROM AUTHOR]

Differential evolutionary (DE) algorithm is one of the most frequently used evolutionary computation method for the solution of non-differentiable, complex and discontinuous real value numerical problems. The analytical structure of the mutation and crossover operators used by DE and the initial values of the parameters of the relevant operators affect the problem-solving ability of DE. Unfortunately, there is no analytical method for selecting and initializing the best artificial genetic operators that DE can use to solve a problem. Therefore, there is a need to develop new evolutionary search methods that are parameter-free and insensitive to the artificial genetic operators they use. In this paper, the Bernstein–Levy differential evolution (BDE) algorithm, which has a unique elitist-mutation operator and a Bernstein polynomials-based stochastic parameter-free crossover operator, is introduced. The numerical problem-solving success of BDE is statistically evaluated by using 30 benchmark problems of CEC2014 in the numerical experiments presented. BDE's success in solving the related benchmark problems is statistically compared with six state-of-the-art comparison algorithms. In this paper, three real-world optimization problems are also solved by using the proposed algorithm, BDE. According to statistics generated from the experimental results, BDE is statistically better than comparison methods in solving the related real-world problems. [ABSTRACT FROM AUTHOR]

In this paper, we address the issue of solving problems with multiple components, multiple objectives, and target values for each objective. There are limitations in managing these multi-component, multi-goal problems such as the need for domain expertise to combine or prioritize the goals. In this paper, we propose a domain-independent method, Adaptive Leveling-Weighting-Clustering (ALWC), to manage the exploration of design scenarios of multi-goal, engineering-design problems. Using ALWC, designers explore combinations and priorities of the goals based on their interrelationships. Through iteration, design scenarios are obtained with higher goal achievements and an improved understanding of the relationship among subsystems. This is achieved without increasing computational complexity. This knowledge is helpful for multi-component design. The ALWC method is demonstrated using a thermal-system design problem. [ABSTRACT FROM AUTHOR]

The main objective of this paper is to present an improved neural network algorithm (INNA) for solving the reliability-redundancy allocation problem (RRAP) with nonlinear resource constraints. In this RRAP, both the component reliability and the redundancy allocation are to be considered simultaneously. Neural network algorithm (NNA) is one of the newest and efficient swarm optimization algorithms having a strong global search ability that is very adequate in solving different kinds of complex optimization problems. Despite its efficiency, NNA experiences poor exploitation, which causes slow convergence and also restricts its practical application of solving optimization problems. Considering this deficiency and to obtain a better balance between exploration and exploitation, searching procedure for NNA is reconstructed by implementing a new logarithmic spiral search operator and the searching strategy of the learner phase of teaching–learning-based optimization (TLBO) and an improved NNA has been developed in this paper. To demonstrate the performance of INNA, it is evaluated against seven well-known reliability optimization problems and finally compared with other existing meta-heuristics algorithms. Additionally, the INNA results are statistically investigated with the Wilcoxon sign-rank test and Multiple comparison test to show the significance of the results. Experimental results reveal that the proposed algorithm is highly competitive and performs better than previously developed algorithms in the literature. [ABSTRACT FROM AUTHOR]

This paper introduces a new perspective of the traditional view on the velocity of each physical particle in the coupled Burgers' equation in the backward semi-Lagrangian method (BSLM). The proposed methods reduce the number of Cauchy problems to be solved by observing a single virtual characteristic curve with a velocity. This can drastically reduce the computational cost of determining the departure point. Then, we solve the derived system reflected by the single virtual characteristic curve. Moreover, an efficient strategy for the derived linear system of equations is provided. Four examples are tested to demonstrate the adaptability and efficiency of the proposed method. The test results show that the proposed method has third- and fourth-order accuracy in time and space, respectively. In addition, compared with the existing method of solving the problem along two particles with different velocities, we confirm that the proposed method significantly reduces computational cost while maintaining accuracy well. [ABSTRACT FROM AUTHOR]

In this paper the step by step descent algorithm is extended to continuous optimization problems and applied to the optimal sizing of truss structures. The step by step descent method, recently developed, was applied to the discrete optimization of rigid structures. To solve continuous problems, a multi-stage optimization algorithm is proposed, which involves implementing the step by step descent method in multiple stages. In each stage, the continuous areas of the variables are progressively divided into a finite number of points. The algorithm is based on the search for the steepest gradient descent direction that minimizes the cost function and employs a wise heuristic approach to bypassing local optima. To evaluate the algorithm's performance, a study was carried out on ten mathematical and four truss optimization problems. For unconstrained mathematical problems, the algorithm demonstrates quick converges to optimum solution from any starting point. For truss structures, the starting design point is selected based on structural knowledge to enhance convergence speed. The obtained results surpass those achieved by other state-of-the-art optimization algorithms, affirming the efficiency, robustness and the promptness of the proposed method. [ABSTRACT FROM AUTHOR]

When a problem has more than one solution, it is often important, depending on the underlying context, to enumerate (i.e., to list) them all. Even when the enumeration can be done in polynomial delay, that is, spending no more than polynomial time to go from one solution to the next, this can be costly as the number of solutions themselves may be huge, including sometimes exponential. Furthermore, depending on the application, many of these solutions can be considered equivalent. The problem of an efficient enumeration of the equivalence classes or of one representative per class (without generating all the solutions), although identified as a need in many areas, has been addressed only for very few specific cases. In this paper, we provide a general framework that solves this problem in polynomial delay for a wide variety of optimization problems solvable by dynamic programming algorithms, and for certain types of equivalence relations between solutions. [ABSTRACT FROM AUTHOR]

Procedural knowledge space theory (PKST) was recently proposed by Stefanutti (British Journal of Mathematical and Statistical Psychology, 72(2) 185–218, 2019) for the assessment of human problem-solving skills. In PKST, the problem space formally represents how a family of problems can be solved and the knowledge space represents the skills required for solving those problems. The Markov solution process model (MSPM) by Stefanutti et al. (Journal of Mathematical Psychology, 103, 102552, 2021) provides a probabilistic framework for modeling the solution process of a task, via PKST. In this article, three adaptive procedures for the assessment of problem-solving skills are proposed that are based on the MSPM. Beside execution correctness, they also consider the sequence of moves observed in the solution of a problem with the aim of increasing efficiency and accuracy of assessments. The three procedures differ from one another in the assumption underlying the solution process, named pre-planning, interim-planning, and mixed-planning. In two simulation studies, the three adaptive procedures have been compared to one another and to the continuous Markov procedure (CMP) by Doignon and Falmagne (1988a). The last one accounts for dichotomous correct/wrong answers only. Results show that all the MSP-based adaptive procedures outperform the CMP in both accuracy and efficiency. These results have been obtained in the framework of the Tower of London test but the procedures can also be applied to all psychological and neuropsychological tests that have a problem space. Thus, the adaptive procedures presented in this paper pave the way to the adaptive assessment in the area of neuropsychological tests. [ABSTRACT FROM AUTHOR]

Products with complex free-form surfaces, such as aerospace impellers and automotive engines, are typically manufactured with ball-end milling. The machined surface topography is critical to these key components' performance in harsh environments. Accurate prediction of the machined surface topography is essential to obtaining the optimized process parameters to achieve the best possible surface quality. An improved Z-MAP method based on the sequential quadratic programming (SQP) algorithm is proposed for efficient ball-end milling surface topography simulation in this paper. Compared to the traditional Z-MAP method, this improved method does not discretize the cutter edge and does not require a strict time-step limit. At each simulation time interval, the workpiece surface grid points falling into the cutting-edge instantaneous sweep polygon are searched to reduce the computation scale. An optimization problem, which combines these grid points' coordinates with the cutting-edge trajectory model, is established for the accurate cutting time and cutting-edge element. The SQP algorithm is used to solve this optimization problem due to its global search capability. The surface topography is then updated by comparing the height of the cutting-edge element with the corresponding grid point. Experimental results indicate that the simulated surface topography is consistent with the measured surface topography. The proposed method achieves the same level of accuracy as the traditional method while requiring less computing time. The proposed method for fast surface topography in ball-end milling shows potential in optimizing process parameters to guarantee the surface quality of critical components. [ABSTRACT FROM AUTHOR]

Much recent research effort has been directed to the development of efficient algorithms for solving minimax problems with theoretical convergence guarantees due to the relevance of these problems to a few emergent applications. In this paper, we propose a unified single-loop alternating gradient projection (AGP) algorithm for solving smooth nonconvex-(strongly) concave and (strongly) convex–nonconcave minimax problems. AGP employs simple gradient projection steps for updating the primal and dual variables alternatively at each iteration. We show that it can find an ε -stationary point of the objective function in O ε - 2 (resp. O ε - 4 ) iterations under nonconvex-strongly concave (resp. nonconvex–concave) setting. Moreover, its gradient complexity to obtain an ε -stationary point of the objective function is bounded by O ε - 2 (resp., O ε - 4 ) under the strongly convex–nonconcave (resp., convex–nonconcave) setting. To the best of our knowledge, this is the first time that a simple and unified single-loop algorithm is developed for solving both nonconvex-(strongly) concave and (strongly) convex–nonconcave minimax problems. Moreover, the complexity results for solving the latter (strongly) convex–nonconcave minimax problems have never been obtained before in the literature. Numerical results show the efficiency of the proposed AGP algorithm. Furthermore, we extend the AGP algorithm by presenting a block alternating proximal gradient (BAPG) algorithm for solving more general multi-block nonsmooth nonconvex-(strongly) concave and (strongly) convex–nonconcave minimax problems. We can similarly establish the gradient complexity of the proposed algorithm under these four different settings. [ABSTRACT FROM AUTHOR]

Cooperation search algorithm (CSA) is a new metaheuristic algorithm inspired from the team cooperation behaviors in modern enterprises and is characterized by fast convergence. However, for complex multimodal problems, it may get trapped into local optima and suffer from premature convergence for the shortcoming of population updating guided only by leading individuals. In this paper, the issue of low convergence efficiency and convergence accuracy of the CSA algorithm on complex multimodal problems is dramatically alleviated by integrating the mutation and crossover operators in DE algorithm. Experimental results demonstrate the better performance of CCSA on convergence speed and accuracy as compared to other existing optimizers. Furthermore, aiming at the problem that there is no universal approach for the multi-degree reduction in Ball Bézier surfaces under different interpolation constrains, we propose a new method to solve this problem by introducing metaheuristic methods, where the change of interpolation constrains is treated as the change of decision variables. The modeling examples show that the proposed method is effective and easy to implement under different interpolation constrains, which can achieve the multi-degree reduction in Ball Bézier surfaces at one time and can simplify the degree reduction procedure significantly. [ABSTRACT FROM AUTHOR]

Cloud-edge collaborative computing (CECC) is a critical way to solve the real-time problems in the Medical Internet of Things (MIoT) and Industrial IoT (IIoT) applications. However, how to efficiently schedule the real-time and non real-time tasks to the cloud or edge servers that are configured with heterogeneous computing resources such as GPUs, NPUs and FGPAs remains a critical challenge. To address this challenge, this paper first defines the capability elements of CECC architecture, and then formally describes the workflow containerized tasks and heterogeneous computing resources of CECC system. Next, it proposes a heuristic task scheduling algorithm based on the affinity between tasks and nodes (physical machines or virtual machines) by matching the task resource requests with the node resource configurations. Later, it generates the initial mapping matrix between tasks and nodes with the affinity sorting result. And finally, it optimizes the mapping results under the constraints of limited resources and task dependency, which consequently generates an efficient scheduling scheme for the real-time IoT tasks in the CECC system. Experimental results demonstrate that the proposed algorithm can effectively increases the utilization efficiency of heterogeneous resources and improves the scheduling performance of real-time IoT tasks. [ABSTRACT FROM AUTHOR]

Solving problems on graphs dynamically calls for algorithms to function under repeated modifications to the graph and to be more efficient than solving the problem for the whole graph from scratch after each modification. Dynamic algorithms have been considered for several graph properties, for example connectivity, shortest paths and graph recognition. In this paper we present fully dynamic algorithms for the recognition of threshold graphs and chain graphs, which are optimal in the sense that the costs per modification are linear in the number of modified edges. Furthermore, our algorithms also consider the addition and deletion of sets of vertices as well as edges. In the negative case, i.e., where the graph is not a threshold graph or chain graph anymore, our algorithms return a certificate of constant size. Additionally, we present optimal fully dynamic algorithms for the Hamiltonian cycle problem and the Hamiltonian path problem on threshold and chain graphs which return a vertex cutset as certificate for the non-existence of such a path or cycle in the negative case. [ABSTRACT FROM AUTHOR]

In the research and application of images, people are often only interested in the foreground or specific area of the image, so it is necessary to extract the specific area from the image, and image segmentation technology is the key to solving this problem. Aiming at the complex background and the color image with unclear target contour as the target image to be segmented, this paper first uses the texture and color of the image as the feature vector, and proposes an image segmentation algorithm based on SVM. The experimental results show that the segmentation accuracy is 91.23%. Secondly, in order to improve the accuracy of segmentation, the SVM algorithm is improved. The improved SVM algorithm is based on the grid search method to optimize the parameters C and g in the SVM. At the same time, the HIS color channel is added to the feature vector to obtain more Excellent SVM image segmentation model. Finally, the color image segmentation is verified and compared with the standard SVM algorithm. The experimental results show that the accuracy rate of the improved SVM algorithm reaches 97.263%, which improves the segmentation efficiency. It is verified that the improved model proposed in this paper can effectively segment complex color images. [ABSTRACT FROM AUTHOR]

The results of a parallel implementation of a randomized vector algorithm for solving systems of linear equations are presented in the paper. The solution is represented in the form of a Neumann series. The stochastic method computes this series by sampling only random columns, avoiding multiplication of matrix by matrix and matrix by vector. We consider the case when the matrix is too large to fit in random-access memory (RAM). We use two approaches to solve this problem. In the first approach, the matrix is divided into parts that are distributed among MPI processes and stored in the available RAM of the cluster nodes. In the second approach, the entire matrix is stored on each node's hard drive, loaded into RAM, and processed in parts. Independent Monte Carlo experiments for random column indices are distributed among MPI processes or OpenMP threads for both approaches to matrix storage. The efficiency of parallel implementations is analyzed. Results are given for a system governed by dense matrices of size 10 4 and 10 5 . [ABSTRACT FROM AUTHOR]

Fault diagnosis of interconnection networks is vital to ensuring the reliability and maintenance of multiprocessor systems. Based on graph theory, diagnostic algorithms for solving the problem of fault diagnosis in interconnection networks have been widely studied. As the number of processors in multiprocessor systems has increased in recent years, fault diagnosis algorithms based on graph theory cannot meet the current diagnosis requirements of some interconnection networks, such as t-diagnosable systems. In this paper, we use the evolution diagnosis approach to study fault diagnosis in t-diagnosable systems under the PMC model. First, for a t-diagnosable system G with a syndrome σ , we use a simple centralized algorithm to generate its simplified diagnosis graph G f , which contains all the faulty nodes in G. Based on the graph, we prove that the faulty node set in G is the minimum cover set of G f . Next, we prove that the problem of computing the minimum cover set for G f is equivalent to the problem of computing the optimal solution of a zero-one integer program. Using this result, we propose a novel genetic algorithm to solve the problem of the zero-one integer program. The simulation results show that the diagnostic accuracy of our proposed algorithm is equal to or greater than 96% and that the proposed algorithm outperforms its competitors in terms of diagnostic accuracy, number of iterations and running time. [ABSTRACT FROM AUTHOR]

In the field of intelligent manufacturing, robot grasping and sorting is important content. However, there are some disadvantages in the traditional single-view-based manipulator grasping methods by using a 2D camera, where the efficiency and the accuracy of grasping are both low when facing the scene of stacking and occlusion for the reason that there is information missing by single-view 2D camera-based methods while acquiring scene information, and the methods of grasping only can't change the difficult-to-grasp scene which is stack and occluded. Regarding the issue above, a pushing-grasping collaborative method based on the deep Q-network in dual viewpoints is proposed in this paper. This method in this paper adopts an improved deep Q-network algorithm, with an RGB-D camera to obtain the information of objects' RGB images and point clouds from two viewpoints, which solved the problem of lack of information missing. What's more, it combines the pushing and grasping actions with the deep Q-network, which make it have the ability of active exploration, so that the trained manipulator can make the scenes less stacking and occlusion, and with the help of that, it can perform well in more complicated grasping scenes. In addition, we improved the reward function of the deep Q-network and propose the piecewise reward function to speed up the convergence of the deep Q-network. We trained different models and tried different methods in the V-REP simulation environment, and it drew a conclusion that the method proposed in this paper converges quickly and the success rate of grasping objects in unstructured scenes raises up to 83.5%. Besides, it shows the generalization ability and well performance when novel objects appear in the scenes that the manipulator has never grasped before. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new inertial iterative method to solve classical variational inequalities with pseudomonotone and Lipschitz continuous operators in the setting of a real Hilbert space. The proposed iterative scheme is basically analogous to the extragradient method used to solve the problems of variational inequalities in real Hilbert spaces. The strong convergence of the proposed algorithm is set up with the prior knowledge of Lipschitz's constant of an operator. Finally, several computational experiments are listed to show the applicability and efficiency of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Harris hawks optimization (HHO) is a new meta-heuristic algorithm that builds a model by imitating the predation process of Harris hawks. In order to solve the problems of poor convergence speed caused by uniform choice position update formula in the exploration stage of basic HHO and falling into local optimization caused by insufficient population richness in the later stage of the algorithm, a Harris hawks optimization based on global cross-variation and tent mapping (CRTHHO) is proposed in this paper. Firstly, the tent mapping is introduced in the exploration stage to optimize random parameter q to speed up the convergence in the early stage. Secondly, the crossover mutation operator is introduced to cross and mutate the global optimal position in each iteration process. The greedy strategy is used to select, which prevents the algorithm from falling into local optimal because of skipping the optimal solution and improves the convergence accuracy of the algorithm. In order to investigate the performance of CRTHHO, experiments are carried out on ten benchmark functions and the CEC2017 test set. Experimental results show that the CRTHHO algorithm performs better than the HHO algorithm and is competitive with five advanced meta-heuristic algorithms. [ABSTRACT FROM AUTHOR]

To solve the problem that uneven illumination is inevitably to reduce the image quality, an adaptive illumination correction algorithm based on a combined model of bottom-hat and improved gamma transform is proposed to process and improve the image quality. In this paper, the multi-scale Gaussian function is adopted to estimate the image illumination components. Then, the two-dimensional gamma function is improved, and the coefficients of gamma transform are dynamically adjusted by using the obtained illumination components to realize the adaptive correction of the image. Finally, the corrected image is fused with the image transformed by the bottom-hat. Through a large number of experiments, it is verified that the proposed method can retain more detailed information, and the corrected picture does not produce small noise points with a better fidelity effect. [ABSTRACT FROM AUTHOR]

The Cauchy problem for general elliptic equations of second order is considered. In a previous paper (Berntsson et al. in Inverse Probl Sci Eng 26(7):1062–1078, 2018), it was suggested that the alternating iterative algorithm suggested by Kozlov and Maz'ya can be convergent, even for large wavenumbers k 2 , in the Helmholtz equation, if the Neumann boundary conditions are replaced by Robin conditions. In this paper, we provide a proof that shows that the Dirichlet–Robin alternating algorithm is indeed convergent for general elliptic operators provided that the parameters in the Robin conditions are chosen appropriately. We also give numerical experiments intended to investigate the precise behaviour of the algorithm for different values of k 2 in the Helmholtz equation. In particular, we show how the speed of the convergence depends on the choice of Robin parameters. [ABSTRACT FROM AUTHOR]

Artificial intelligence is an enabling technology for autonomous surface vehicles, with methods such as evolutionary algorithms, artificial potential fields, fast marching methods, and many others becoming increasingly popular for solving problems such as path planning and collision avoidance. However, there currently is no unified way to evaluate the performance of different algorithms, for example with regard to safety or risk. This paper is a step in that direction and offers a comparative study of current state-of-the art path planning and collision avoidance algorithms for autonomous surface vehicles. Across 45 selected papers, we compare important performance properties of the proposed algorithms related to the vessel and the environment it is operating in. We also analyse how safety is incorporated, and what components constitute the objective function in these algorithms. Finally, we focus on comparing advantages and limitations of the 45 analysed papers. A key finding is the need for a unified platform for evaluating and comparing the performance of algorithms under a large set of possible real-world scenarios. [ABSTRACT FROM AUTHOR]

In this paper, a novel parallel algorithm is proposed to solve the problems of heavy computation and long simulation time in the field of compressible flows. In this algorithm, a third-order upwind scheme and a fourth-order central difference scheme are employed, with a third-order Runge-Kutta method for time stepping. Considering the powerful floating-point computing ability of the Graphics Processing Unit (GPU), this paper establishes the algorithm on the basis of GPU. Moreover, the direct numerical simulation method is adopted in this algorithm to improve the solution accuracy of the simulation results. To further enhance the efficiency of the algorithm, several optimization strategies are explored in the design of the algorithm as well. Both accuracy and feasibility of the algorithm are verified by a classical two-dimensional example. Compared with solving this example on the Central Processing Unit platform, the experimental results demonstrate that the maximum speedup ratio achieved by our approach is 18.03 times. [ABSTRACT FROM AUTHOR]

The basic fuzzy neural network algorithm has slow convergence and large amount of calculation, so this paper designed a particle swarm optimization trained fuzzy neural network algorithm to solve this problem. Traditional particle swarm optimization is easy to fall into local extremes and has low efficiency, this paper designed new update rules for inertia weight and learning factors to overcome these problems. We also designed training rules for the improved particle swarm optimization to train fuzzy neural network, and the hybrid algorithm is applied to solve the path planning problem of intelligent driving vehicles. The efficiency and practicability of the algorithm are proved by experiments. [ABSTRACT FROM AUTHOR]

The design of genetic operators is absolutely one of the core work of evolutionary algorithms research. However, the essence of the evolutionary algorithms is that a lot of algorithm design is based on the manual result analysis, summarize, refine, feedback, and then, the algorithms are designed adaptively and correspondingly. This kind of design scheme needs artificial statistics and analysis of large amounts of data, which greatly increases the burden of the designers. To solve this problem, an evolutionary algorithm framework based on genetic operator automatic design is proposed in this paper. In the first step, Gene Expression Programming and Differential Evolution methods are combined together and used to design the genetic operators automatically and adaptively, this hybrid method can not only explore solutions in problem space for the problem solving as most classical evolutionary algorithms do, but also generate genetic operators automatically in operator space for the proper operators extraction and selection related to the evolutionary algorithms. In the second step, the designed operators are adopted into the typical evolutionary algorithms to verify the performance and the result shows that the new designed genetic operator is superior to or at least equivalent to some existing DE variants in a set of classical benchmark functions. More importantly, this paper is not aimed at designing high performance algorithms, but to provide a new perspective for algorithms designing, and to provide a reference scheme for the machine algorithms designing. [ABSTRACT FROM AUTHOR]