Search

The Magnetohydrodynamic (MHD) effect on the bloodstream, induced by the static magnetic field of Magnetic Resonance Imaging (MRI) devices, distorts Electrocardiogram (ECG) components, and poses challenges to cardiac gating and monitoring during MRI examinations. Restoring ECG components from MHD-induced artifacts has always been a challenge, primarily due to the influence of numerous device-induced and physiological variables and the absence of paired ground truth clean ECG for validation. In this research, at first, we employ unpaired restoration of MHD-corrupted 12-lead ECG signals using one dimensional (1D) Cycle Generative Adversarial Networks (CycleGANs) for channel and patient orientation-specific restoration. Subsequently, a 1D-segmentation-based comprehensive restoration scheme is proposed based on the phase 1 outputs to simultaneously restore 12-channel ECG signals, irrespective of internal and external factors affecting ECG. By employing the proposed Magnetohydrodynamic Generative Adversarial Network (MHDGAN) and MHD-to-ECG Network (MHD2ECGNet) for unpaired and comprehensive restoration, we achieved an overall spectral correlation improvement of 92.56% and 77.64% , respectively. In R-peak detection, MHDGAN demonstrated an overall precision, recall, and F1-score of 98.14% , 94.12% , and 96.01% , respectively. The extracted heart rate (HR) and heart rate variability (HRV) from the restored waveforms closely match the ground truth, as confirmed through quantitative and qualitative assessments. The proposed framework has proven effective in restoring MHD-corrupted ECG waveforms, even in the absence of paired ground truth labels and amidst compounding distortions from multiple sources. • Magnetohydrodynamic (MHD) corrupted ECG signals can be restored using Deep Learning. • 1D-CycleGANs can be used for unpaired and unaligned MHD data for restoration. • Multichannel 1D-Segmentation models can be used to generalize the restoration process. • Temporal, Spectral and Clinical evaluations confirmed the efficacy of the proposed framework. • The proposed approach can enhance cardiac monitoring during MRI examinations. [ABSTRACT FROM AUTHOR]

Physiological signals, such as the Photoplethysmogram (PPG) collected through wearable devices, consistently encounter significant motion artifacts. Current signal processing techniques, and even state-of-the-art machine learning algorithms, frequently struggle to effectively restore the inherent bodily signals amidst the array of randomly generated distortions. This often leads to the modification or even the degradation of the underlying physiological information. To enhance heart rate estimation from wrist PPG (wPPG) signals, this study introduces the Translation Through Restoration GAN (TTR-GAN). TTR-GAN comprises cascaded dual-stage 1D Cycle Generative Adversarial Networks (1D-CycleGANs) constructed using Super-ONNs. In the first phase, corrupted wPPG waveforms are blindly restored using a 1D-CycleGAN-based restoration framework. Subsequently, in the second phase, the restored wPPG waveforms are translated into clean finger PPG (fPPG) signals through a 1D-CycleGAN-based signal-to-signal translation or synthesis framework. Both the restorer and translator GANs undergo independent evaluation using robust temporal, spectral, and clinical metrics. The application of the multipass restoration scheme to the wPPG signals resulted in significantly lower entropy compared to the raw wPPGs, indicating reduced irregularity. Using the proposed PRTX metric to evaluate the translational ability of the multichannel translator CycleGAN, we achieved a substantial improvement of 35.88% in wrist-to-finger PPG translation. The correlation between the pulse rate and pulse rate variations estimated from the generated fPPG signals and the heart rate and heart rate variability readings from the ground truth ECG improved by approximately 10.4% and 14.7% , respectively, when compared to the raw wPPG signals. The proposed TTR-GAN can be implemented in wearable devices to obtain reliable real-time cardiovascular data during daily activities. [ABSTRACT FROM AUTHOR]

Electroencephalogram (EEG) signals suffer substantially from motion artifacts even in ambulatory settings. Signal processing techniques for removing motion artifacts from EEG signals have limitations, and the potential of classical or deep machine-learning algorithms for this task remains largely unexplored. We propose Attention-Guided Operational CycleGAN (AGO-CycleGAN), a novel CycleGAN-based framework to remove motion artifacts and enhance the quality of corrupted EEG signals. It incorporates self-generative operational neurons and an attention-guided Feature Pyramid Network with modified bottlenecks as generators and PatchGAN-based discriminators. AGO-CycleGAN was trained and tested on a single-channel EEG dataset from 23 subjects, using a subject-independent Jackknife cross-validation approach. It outperformed other methods and was evaluated through qualitative and quantitative analysis, employing robust metrics in both temporal and frequency domains. The results indicate its effectiveness in restoring EEG signals affected by severe motion artifacts. AGO-CycleGAN achieves state-of-the-art EEG restoration performance in the temporal domain, gaining improvements in signal-to-noise ratio (ΔSNR) and temporal correlation (η temp) by 26.497 dB and 87.2% , respectively. It also showed excellent performance in preserving the spectral EEG components (delta, theta, alpha, beta, and gamma), evaluated through band power ratio before and after restoration. Spectral correlation (η spec) improved by 93.5% after cleaning the motion artifacts. Qualitative evaluations showed excellently reconstructed clean EEG waveforms upon restoration. Spectral restoration visualized through Power Spectral Density (PSD) plots and per-band topographic maps showed a uniform removal of high-power motion artifact components throughout the spectrum. AGO-CycleGAN significantly outperformed existing techniques in EEG artifact removal and can be extended to multi-channel EEG systems. • This study aims to restore EEG signals from motion artifacts using 1D-CycleGAN. • We use Self-Organized Operational Neural Networks to build the proposed Attention-Guided Operational ‎CycleGAN.‎ • The proposed approach outperforms all competing methods in the relevant literature by a significant margin.‎ • The proposed framework can be modified and reused to restore other physiological waveforms.‎ [ABSTRACT FROM AUTHOR]

Fetal heart monitoring and early disease detection using non-invasive fetal electrocardiograms (fECG) can help substantially to reduce infant death through improved diagnosis of Coronary Heart Disease (CHD) in the fetus. Despite the potential benefits, non-invasive fECG extraction from maternal abdominal ECG (mECG) is a challenging problem due to multiple factors such as the overlap of maternal and fetal R-peaks, low amplitude of fECG, and various systematic and environmental noises. Conventional fECG extraction techniques, such as adaptive filters, independent component analysis (ICA), empirical mode decomposition (EMD), etc., face various performance issues due to the fECG extraction challenges. In this paper, we proposed a novel deep learning architecture, LinkNet++ (motivated by the original LinkNet) to extract fECG from abdominal mECG automatically and efficiently using two different publicly available datasets. LinkNet++ is equipped with a feature-addition method to combine deep and shallow levels with residual blocks to overcome the limitations of U-Net and UNet++ models. It also has deep supervised and densely connected convolution blocks to overcome the limitations of the original LinkNet. The proposed LinkNet++ model was evaluated using fECG signal reconstruction and fetal QRS (fQRS) detection. As a signal-to-signal synthesis model, LinkNet++ performed very well in two real-life datasets and achieved 85.58% and 87.60% Pearson correlation coefficients (PCC) between the ground truth and predicted fECG on two datasets, respectively. In terms of fQRS detection, it also outperformed most of the previous works and showed excellent performance with more than 99% of F1 scores on both datasets. Our results indicate that the proposed model can potentially extract fECG non-invasively with excellent signal quality, thereby providing an excellent diagnostic tool for various fetal heart diseases. • A novel LinkNet++ with deep supervision and dense blocks is proposed for automatic extraction of fECG from mECG. • A rigorous leave one subject out cross-validation study is conducted using two datasets to build a generalizable model. • The innovative LinkNet++ model outperforms all previous models and standard signal processing methodologies. [ABSTRACT FROM AUTHOR]

Various foot complications can be easily avoided by continuously monitoring plantar (foot sole) pressure and temperature at home. Systems which can simultaneously measure plantar pressure and temperature in real time are still scarce. In this work, the design, characterization, and implementation of a Fiber Bragg Gratings (FBG) based smart insole capable of simultaneously measuring plantar pressure and temperature has been reported. The instrumented insole was tested and verified during static and gait exercises. The paper also provides a comparison of the developed optoelectronic-based solution with a commercially available and widely used plantar pressure measurement and analysis system, and a lab-made electronic sensor-based solution for simultaneously recording plantar pressure and temperature. It was shown that even though the commercial plantar pressure acquisition system is very robust and highly precise due to many sensing units on the insole, the developed insole with a much smaller number of sensors can simultaneously acquire both plantar temperature and pressure with reasonable precision while displaying both foot pressure and temperature maps, and gait cycle plots in real-time with a development cost more than eight times lower than the manufacturing cost of the commercial solution. Our proposed optoelectronic-based solution is lightweight, uncomplicated but robust, and electronically safer than the commercial system. While the proposed system is far from its optimized form, we expect that our developed prototype will instigate other researchers in this domain to further explore optoelectronic-based solutions in real-time plantar pressure and temperature monitoring. [Display omitted] • The proposed FBG-based smart insole can simultaneously acquire foot pressure and temperature data in real-time. • FBG sensor characterization, temperature and pressure data acquisition, and GUI developed for real-time data visualization have been reported. • The devised prototype can help monitor daily temperature asymmetry and gait anomalies in a household setting. • The proposed system can be improved to develop an early warning tool for patients with diabetic foot complications. [ABSTRACT FROM AUTHOR]

• Automated multi-stage method employed to classify urban wastes. • A novel model named GCDN-Net is proposed as the garbage classifier. • Four different types of waste have been classified using the garbage classifier. • Saliency map-based visualization with ScoreCAM is shown as a qualitative evaluation. The escalating waste volume due to urbanization and population growth has underscored the need for advanced waste sorting and recycling methods to ensure sustainable waste management. Deep learning models, adept at image recognition tasks, offer potential solutions for waste sorting applications. These models, trained on extensive waste image datasets, possess the ability to discern unique features of diverse waste types. Automating waste sorting hinges on robust deep learning models capable of accurately categorizing a wide range of waste types. In this study, a multi-stage machine learning approach is proposed to classify different waste categories using the "Garbage In, Garbage Out" (GIGO) dataset of 25,000 images. The novel Garbage Classifier Deep Neural Network (GCDN-Net) is introduced as a comprehensive solution, adept in both single-label and multi-label classification tasks. Single-label classification distinguishes between garbage and non-garbage images, while multi-label classification identifies distinct garbage categories within single or multiple images. The performance of GCDN-Net is rigorously evaluated and compared against state-of-the-art waste classification methods. Results demonstrate GCDN-Net's excellence, achieving 95.77% accuracy, 95.78% precision, 95.77% recall, 95.77% F1-score, and 95.54% specificity when classifying waste images, outperforming existing models in single-label classification. In multi-label classification, GCDN-Net attains an overall Mean Average Precision (mAP) of 0.69 and an F1-score of 75.01%. The reliability of network performance is affirmed through saliency map-based visualization generated by Score-CAM (class activation mapping). In conclusion, deep learning-based models exhibit efficacy in categorizing diverse waste types, paving the way for automated waste sorting and recycling systems that can mitigate costs and processing times. [ABSTRACT FROM AUTHOR]

Although the relevance of establishing low-carbon economic growth has been extensively highlighted in the Paris Agreement and the Sustainable Development Goals declarations, the analysis of the macroeconomic determinants of carbon productivity has remained overlooked in the literature. Therefore, this study makes a novel attempt to evaluate whether energy efficiency gains, along with renewable energy use, financial inclusivity, economic growth, globalization, and urbanization, improve carbon productivity in the emerging seven countries between 2007 and 2018. Moreover, the study contributes to the literature by predicting the net moderating and mediating effects of energy efficiency improvements on carbon productivity. The findings support that enhancing the level of energy use efficiency by 1% helps to improve carbon productivity by around 0.3% in the long run. In addition, the predicted net effects reveal that energy efficiency gains exert a moderating effect on the level of carbon productivity and reverse the negative impact of financial inclusivity, trade globalization, and urbanization on carbon productivity. However, energy efficiency gains cannot moderate to neutralize the carbon productivity-inhibiting impact associated with economic growth. Moreover, the analysis shows that energy efficiency gains mediate to jointly boost carbon productivity alongside higher renewable energy use. Lastly, financial globalization is evidenced to enhance carbon productivity in the emerging seven countries in the long run. Accordingly, a set of relevant policies are recommended. • 1% improvement in energy efficiency enhances carbon productivity by 0.3%. • Energy efficiency improvement exerts moderating and mediating effects. • Renewable energy use does not directly influence carbon productivity. • Financial inclusivity, economic growth, and urbanization reduce carbon productivity. • Globalization exerts heterogeneous impacts on carbon productivity. [ABSTRACT FROM AUTHOR]

The non-invasive fetal electrocardiogram (fECG) enables easy detection of developing heart abnormalities, leading to a significant reduction in infant mortality rate and post-natal complications. Due to the overlapping of maternal and fetal R-peaks, the low amplitude of the fECG, systematic and ambient noises, typical signal extraction methods, such as adaptive filters, independent component analysis, empirical mode decomposition, etc., are unable to produce satisfactory fECG. While some techniques can produce accurate QRS waves, they often ignore other important aspects of the ECG. Utilizing extensive preprocessing and an appropriate framework, our approach, built upon 1D CycleGAN, achieves fECG signal reconstruction from the mECG signal while preserving its morphology. The performance of our solution was evaluated by combining two available datasets from Physionet, "Abdominal and Direct Fetal ECG Database" and "Fetal electrocardiograms, direct and abdominal with reference heartbeat annotations", where it achieved an average PCC and Spectral-Correlation score of 88.4% and 89.4%, respectively. It detects the fQRS of the signal with accuracy, precision, recall and F1 score of 92.6%, 97.6%, 94.8% and 96.4%, respectively. It can also accurately produce the estimation of fetal heart rate and R-R interval with an error of 0.25% and 0.27%, respectively. The main contribution of our work is that, unlike similar studies, it can retain the morphology of the ECG signal with high fidelity. The accuracy of our solution for fetal heart rate and R-R interval length is comparable to existing state-of-the-art techniques. This makes it a highly effective tool for early diagnosis of fetal heart diseases and regular health checkups of the fetus. [ABSTRACT FROM AUTHOR]

The world is slowly recovering from the Coronavirus disease 2019 (COVID-19) pandemic; however, humanity has experienced one of its According to work by Mishra et al. (2020), the study's first phase included a cohort of 5,262 subjects, with 3,325 Fitbit users constituting the majority. However, among this large cohort of 5,262 subjects, most significant trials in modern times only to learn about its lack of preparedness in the face of a highly contagious pathogen. To better prepare the world for any new mutation of the same pathogen or the newer ones, technological development in the healthcare system is a must. Hence, in this work, PCovNet+, a deep learning framework, was proposed for smartwatches and fitness trackers to monitor the user's Resting Heart Rate (RHR) for the infection-induced anomaly. A convolutional neural network (CNN)-based variational autoencoder (VAE) architecture was used as the primary model along with a long short-term memory (LSTM) network to create latent space embeddings for the VAE. Moreover, the framework employed pre-training using normal data from healthy subjects to circumvent the data shortage problem in the personalized models. This framework was validated on a dataset of 68 COVID-19-infected subjects, resulting in anomalous RHR detection with precision, recall, F-beta, and F-1 score of 0.993, 0.534, 0.9849, and 0.6932, respectively, which is a significant improvement compared to the literature. Furthermore, the PCovNet+ framework successfully detected COVID-19 infection for 74% of the subjects (47% presymptomatic and 27% post-symptomatic detection). The results prove the usability of such a system as a secondary diagnostic tool enabling continuous health monitoring and contact tracing. • A CNN-VAE-based anomaly detection model and an LSTM network to generate temporal-aware embeddings of the latent vector of the primary model is used. • Healthy patient data is used to pretrain the base model and fine-tuned using each subject's baseline data to achieve a personalized version. • The proposed model is validated on 68 COVID-19-infected individuals' data. [ABSTRACT FROM AUTHOR]