Search

The physical and mechanical behavior of soil polymer composites tightly depends on the properties and structures of both soil and polymer. This study aims to investigate the effect of glass transition temperature as one of the most important characteristics of adhesive resins of acrylic polymers on the geotechnical behavior of soils that have not been fully covered by previous studies. To achieve that, three similar copolymers of methyl methacrylate-co-butyl acrylate with different glass-transition temperatures of 1°C, 33°C, and 51°C were synthesized, and two representative specimens of cohesive (kaolinite clay) and noncohesive (sand) soils were chosen to perform a full investigation of the consequential changes in the physical and mechanical behavior. A series of laboratory tests, including the Atterberg limits tests, the unconfined compressive strength tests, direct shear tests in soaked and unsoaked conditions, swelling tests, and odometer tests, were conducted on untreated and treated soils with synthesized polymers. The results showed a salient enhancement in the cohesion and the unconfined compressive strength value of both soils. However, the polymer with a glass-transition temperature near to ambient temperature led to a greater increase in the compressive and shear strength of stabilized soil among its peers. Samples treated with the polymer having the lowest glass transition temperature revealed a more compression index (i.e., obtained from odometer tests) and lower unconfined compressive strength. It is also observed that the swelling index and swelling pressure decreased marginally with increasing the glass transition temperature. [ABSTRACT FROM AUTHOR]

Focuses on a study that discussed a four-parameter model that can represent the shear modulus factors and damping coefficients for granular soils. Information on nonlinear soil behavior; Effect of confining pressure on modulus and damping; Experimental data on cohesionless soils; Details on the MIT-S1 stress soil model for clays and sands.