Search

This study investigated the different geotechnical characteristics of soil stabilization with the addition of lime and rice husk ash (RHA) in varying amounts (3%, 5%, 7%, and 9% lime, and 4%, 8%, 12%, and 16% RHA). A series of compaction, unconfined compressive strength (UCS), California bearing ratio (CBR), pH, and X-ray diffraction (XRD) tests were performed in the laboratory to assess the impact of the considered admixtures on the stabilized soil parameters. This study also proposes the successful integration of an artificial neural network (ANN) and a Gaussian process regression (GPR) with the experimental UCS observations. The lime concentration, RHA concentration, and curing period were considered as the input parameters, and UCS was considered as the response. The proposed framework was extended to analyze the compressive behavior of treated soil on the minuscule level. Such coupled machine learning-based experimental investigation can provide deep insight into the soil behavior which otherwise would have remained unexplored due to the prohibitive nature of performing laboratory experiments on a large scale. The findings demonstrated the effectiveness of RHA in addition to lime in stabilizing the considered expansive soil. With the addition of lime and RHA mix, the UCS and CBR values of the treated soil increased significantly. [ABSTRACT FROM AUTHOR]

Lime continues to be one of the most popular chemical admixtures used to modify expansive clays despite the associated mixing and pulverization problems. In the present investigation, the efficacy of CaCl2 in place of conventionally used lime is studied by conducting laboratory and field tests. These investigations were carried out on the slopes of a trapezoidal trench made in expansive clay bed. Heave measurements were taken on the lime and CaCl2 treated slopes and also on untreated slopes for four consecutive cycles of wetting and drying. The field cyclic seasonal movements and the subsequent laboratory tests on undisturbed and disturbed soil samples revealed that the CaCl2 could be a promising chemical modifier instead of conventionally used lime, not only due to its multifold influence on heave control, plasticity reduction, and swell properties but also its easy application in the form of solution without any need for pulverization and mixing. Though an apparent reduction in unconfined compressive strength of treated samples is observed, the drained triaxial tests on treated and untreated samples revealed that there is an increase in the angle of internal friction of treated samples. [ABSTRACT FROM AUTHOR]