Search

Measuring the spatiotemporal dynamics of lake and reservoir water storage is fundamental for assessing the influence of climate variability and anthropogenic activities on water quantity and quality. Previous studies estimated relative water volume changes for lakes where both satellite-derived extent and radar altimetry data are available. This approach is limited to only a few hundred lakes worldwide and cannot estimate absolute (i.e. total volume) water storage. We increased the number of measured lakes by a factor of 300 by using high-resolution Landsat and Sentinel-2 optical remote sensing and ICESat-2 laser altimetry, in addition to radar altimetry from the Topex/Poseidon; Jason-1, Jason-2 and Jason-3; and Sentinel-3 and Sentinel-6 instruments. Historical time series (1984–2020) of water storage could be derived for more than 170 000 lakes globally with a surface area of at least 1 km 2 , representing 99 % of the total volume of all water stored in lakes and reservoirs globally. Specifically, absolute lake volumes are estimated based on topographic characteristics and lake properties that can be observed by remote sensing. In addition to that, we also generated relative lake volume changes solely based on satellite-derived heights and extents if both were available. Within this dataset, we investigated how many lakes can be measured in near real time (2020–current) in basins worldwide. We developed an automated workflow for near-real-time global lake monitoring of more than 27 000 lakes. The GloLakes historical and near-real-time lake storage dynamics data from 1984 to current are publicly available through 10.25914/K8ZF-6G46 (Hou et al., 2022c) and a web-based data explorer (http://www.globalwater.online , last access: 12 December 2023). [ABSTRACT FROM AUTHOR]

Measurements of the spatiotemporal dynamics of lake and reservoir water storage are fundamental in the assessment of the influence of climate variability and anthropogenic activities on water quantity and quality, as well as wetland ecology and the estimating greenhouse gas emissions from lakes. Previous studies estimated relative water volume changes for lakes where both satellite-derived extent and radar altimetry data are available. This approach is limited to only few hundreds of lakes worldwide. In this study, the number of measured lakes was increased by a factor 400 using high-resolution Landsat and Sentinel-2 optical remote sensing and ICESat-2 laser altimetry in addition to radar altimetry from the Topex/Poseidon, Jason-1, -2 and -3, and Sentinel-3 instruments. Time series of relative (i.e., storage change) or absolute (i.e., total stored volume) storage for more than 170,000 lakes globally with a surface area of at least 1 km² (representing 99% of the total volume of all water stored in lakes and reservoirs globally) were retrieved. Within these, we were able to develop an automated workflow for near real-time global lake monitoring of more than 27,000 lakes. The historical and near real-time lake storage dynamics data for 1984 to current are publicly available through https://doi.org/10.25914/K8ZF-6G46 (Hou et al., 2022). [ABSTRACT FROM AUTHOR]

We present Multi-Source Weather (MSWX), a seamless global gridded near-surface meteorological product featuring a high 3-hourly 0.1° resolution, near-real-time updates (∼3-h latency), and bias-corrected medium-range (up to 10 days) and long-range (up to 7 months) forecast ensembles. The product includes 10 meteorological variables: precipitation, air temperature, daily minimum and maximum air temperature, surface pressure, relative and specific humidity, wind speed, and downward shortwave and longwave radiation. The historical part of the record starts 1 January 1979 and is based on ERA5 data bias corrected and downscaled using high-resolution reference climatologies. The data extension to within ∼3 h of real time is based on analysis data from GDAS. The 30-member medium-range forecast ensemble is based on GEFS and updated daily. Finally, the 51-member long-range forecast ensemble is based on SEAS5 and updated monthly. The near-real-time and forecast data are statistically harmonized using running-mean and cumulative distribution function-matching approaches to obtain a seamless record covering 1 January 1979 to 7 months from now. MSWX presents new and unique opportunities for hydrological modeling, climate analysis, impact studies, and monitoring and forecasting of droughts, floods, and heatwaves (within the bounds of the caveats and limitations discussed herein). The product is available at www.gloh2o.org/mswx. [ABSTRACT FROM AUTHOR]

Studies using remote sensing data for fire danger prediction have primarily relied on fire ignitions data to develop fire danger indices (FDIs). However, these data may only represent conditions suitable for ignition but may not represent fire danger conditions causing escalating fire size. The fire-related response variable's scalability is a key factor that forms a basis for an FDI to include a broader range of fire danger conditions. Remote sensing derived fire size is a scalable fire characteristic encapsulating all possible fire sizes that previously occurred in the landscape, including extreme fire events. Consequently, we propose a new FDI that uses remote sensing derived fire size as a response variable. We computed fire sizes from the Moderate Resolution Imaging Spectroradiometer (MODIS) satellite instrument burned area. We applied random forest (RF) and logistic regression (LR) to develop the FDI for Australia. RF models performed better than LR, and the higher predicted probabilities demonstrated higher chances for ignited fires to be escalated to larger fire sizes at a regional scale across Australia. However, the predicted probabilities cannot be related to the specific range of fire sizes due to data limitations. Further research with higher temporal and spatial resolution data of both the response and predictor variables can help establish a better relationship between a specific range of fire sizes and the predicted probabilities. [ABSTRACT FROM AUTHOR]

Spectral indices derived from satellite optical remote sensing data have typically been used for fire severity estimation, although other remote sensing systems such as Light Detection and Ranging (LiDAR) are increasingly applied. Despite a multitude of remotely sensed fire severity estimation methods, comparisons of method performance are few. Insights into the merits and limitations of remotely sensed fire severity methods help develop appropriate spatial tools for the management of fire-affected areas. We evaluated the performance of seven passive (optical) and active (LiDAR) remotely sensed fire severity estimation methods in classifying and explaining variation in a field-estimated modified Composite Burn Index (MCBI) for a recent large wildfire in south-eastern Australia. Our evaluation included three commonly applied indices; the differenced Normalized Burn Ratio (dNBR), Relative dNBR (RdNBR) and Relative Burn Ratio (RBR). We compared these NBR indices against two recently proposed fire severity estimation methods that have not previously been evaluated with CBI field data – the Vegetation Structure Perpendicular Index (VSPI) spectral index and the LiDAR point cloud-derived Profile Area Change (PAC), along with experimental relativized forms of these indices (RVSPI and RPAC, respectively). The RVSPI (κ = 0.47) demonstrated similar overall classification accuracy (N classes = 4) to the PAC (κ = 0.48), however both indices had lower classification accuracy than the dNBR (κ = 0.59), RdNBR (κ = 0.59) and RBR (κ = 0.61). The VSPI and PAC were unable to accurately represent non-structural changes caused by lower severity fire. Application of these optical and LiDAR indices should consider their discussed limitations in relation to the objectives of their application. [ABSTRACT FROM AUTHOR]

Remote sensing based retrieved of soil moisture from low frequency passive microwave observations is preferred in different aspects such as better spatial coverage and more measurement compared to traditional ground-based measurements. However, due to coarse spatial resolution of the observations, their applications are limited in local to regional studies. This paper provides a framework using random forest regression to disaggregate the daily SMAP enhanced soil moisture (SPL3SMP_E) utilizing several ancillary data to overcome the spatial resolution limits and cloudiness effects. Ancillaries were acquired from sentinel-1 radar, MODIS monthly NDVI, land cover, topography, and surface soil properties. To validate the downscaled results with 1-km spatial resolution, the OZNET soil moisture measurements and sparse TDR ground soil moisture measurements were collected from Murrumbidgee catchment (Australia) and Firozabad catchment (Iran), respectively. Downscaled soil moisture product unbiased root-mean-square error (UnbRMSE) of ensemble learning demonstrated a range of 0.023 and –0.07 cm3/cm3. The produced downscaled soil moisture exhibited better local heterogeneity when compared to the coarse data and tracked the dynamics of temporal changes in soil moisture. Furthermore, cumulative distribution function (CDF) analysis showed good accuracy of downscaled soil moisture in grassland and cropland. Taken together, the findings supported usefulness of the suggested methodology in downscaling the medium- resolution SMAP soil moisture product. [ABSTRACT FROM AUTHOR]

Access to water is a critical aspect of livestock production, although the relationship between livestock weight gain and water quality remains poorly understood. Previous work has shown that water quality of poorly managed farm dams can be improved by fencing and constructing hardened watering points to limit stock access to the dam, and revegetation to filter contaminant inflow. Here we use cattle weight gain data from three North American studies to develop a cost-benefit analysis for the renovation of farm dams to improve water quality and, in turn, promote cattle weight gain on farms in south-eastern Australia. Our analysis indicated a strong likelihood of positive results and suggested there may be substantial net economic benefit from renovating dams in poor condition to improve water quality. The average per-farm Benefit-Cost Ratios based on deterministic assumptions was 1.5 for New South Wales (NSW) and 3.0 for Victoria in areas where rainfall exceeds 600mm annually. Our analyses suggested that cattle on farms in NSW and Victoria would need to experience additional weight gain from switching to clean water of at least 6.5% and 1.8% per annum respectively, to break even in present value terms. Monte Carlo simulation based on conservative assumptions indicated that the probability of per-farm benefits exceeding costs was greater than 70%. We recommend localised experiments to assess the impact of improved water quality on livestock weight gain in Australian conditions to confirm these expectations empirically. [ABSTRACT FROM AUTHOR]