Search

Activation of metal oxides by light is a robust yet facile approach to manipulating their surface chemistry for favorable reactions with target molecules in heterogeneous catalysis and gas sensors. However, a limited understanding of interface chemistry and the involved mechanism impedes the development of a rational design of oxide interfaces for light‐activated gas sensing. Herein, the TiOx‐assisted photosensitization of In2O3 toward NO2 sensing is investigated as a case study to elucidate the detailed mechanism of light‐activated surface chemistry at the metal/gas interface. The resultant heterogeneous oxides exhibit outstanding NO2 sensing performance under light irradiation thanks to abundant photoexcited electrons and holes that serve as adsorption and desorption sites, respectively, to accelerate both surface reactions. Furthermore, the facile transfer of electrons and holes across the TiOx‐In2O3 interface contributes to improving the reversibility of sensing kinetics. Through this study, the mechanistic understanding is established of how the surface chemistry of metal oxide surfaces can be tuned by light activation providing an effective route to the design fabrication of high‐performance gas sensors. [ABSTRACT FROM AUTHOR]

Transition metal dichalcogenides (TMDs) have attracted significant interest as gas‐sensing materials due to their unique crystal structure and surface. However, there are still issues when it comes to expanding the types of sensing gases for the TMD gas sensors. To extend gas‐sensing selectivity for the TMD gas sensors in this study, a monolayer (ML) 2D metal–organic framework (MOF) is introduced on top of the PtSe2 gas sensor, thereby tuning the major sensing analyte of PtSe2 from NO2 to H2S. Density functional theory calculations elucidate that the metal species of ML MOFs are attributed to the tuned selectivity of the analytes, based on the difference in binding energies. It is also demonstrated that ML MOF maintained the high responsivity of the pristine PtSe2 even at a low concentration of gas (200 ppb). This is further confirmed through the molecular dynamics simulations, which reveal that the ML feature of the ML MOF is highly essential to preserve the intrinsic ultra‐low limit detection properties of pristine PtSe2. [ABSTRACT FROM AUTHOR]

Gas Sensors In article number 2214008, Il‐Doo Kim and co‐workers investigated photosensitization of the TiO2‐In2O3 sensing layer to enhance the NO2 detection capabilities of oxides. The heterogeneous interface engineered between two dissimilar oxides improved the accumulation of photogenerated charge carriers, which accelerated the adsorption and desorption of NO2 molecules. The study elaborates on the light‐mediated modulation of the oxide surface chemistry and establishes a rational design of cost‐effective light‐activated gas sensors. [ABSTRACT FROM AUTHOR]

Gas sensors, heterojunctions, indium oxides, interfacial engineering, photocatalysts, semiconducting oxides Keywords: gas sensors; heterojunctions; indium oxides; interfacial engineering; photocatalysts; semiconducting oxides EN gas sensors heterojunctions indium oxides interfacial engineering photocatalysts semiconducting oxides 1 1 1 04/27/23 20230425 NES 230425 B Gas Sensors b In article number 2214008, Il-Doo Kim and co-workers investigated photosensitization of the TiO SB 2 sb -In SB 2 sb O SB 3 sb sensing layer to enhance the NO SB 2 sb detection capabilities of oxides. Imparting Metal Oxides with High Sensitivity Toward Light-Activated NO2 Detection Via Tailored Interfacial Chemistry (Adv. Funct. [Extracted from the article]

• The non-noble metals are introduced on graphene-based fiber as a sensitizer for the high-performance chemiresistor. • Metal oxides on graphene fibers naturally are converted into metals at a relatively low temperature annealing (under 700 °C) due to catalytic effect of graphene. • The graphene fiber acts as a flexible conductive support as well as a catalyst for the deoxidation of metal oxide. • The metal/metal oxide/graphene fibers exhibited a 16 times higher response to NO 2 gas and recovery than metal oxide/graphene fiber without metal. • The proposed strategy opens a new avenue for the realization of high-performance devices, such as chemical catalysts, photoactive devices. [Display omitted] Noble metal/metal-oxide-based hybrid gas sensors exhibit a low operating temperature, remarkable sensitivity, and fast recovery. As additives, noble metals induce a catalytic sensitization effect, which promotes charge transfer from the metal oxide to the analyte molecules, the so-called spillover mechanism. This suggests that metal catalysts can improve gas sensing performance. Herein, for the first time, non-noble metals are introduced on hybrid metal oxide/graphene fibers as sensitizers to fabricate high-performance chemiresistive sensors. The formation of metal components can be effectively controlled by annealing the metal oxide on graphene. Remarkably, compared with the corresponding metal oxide/graphene fiber sensors without metal components, the metal/metal oxide/graphene fiber sensors exhibit over a 16-fold higher response to NO 2 gas as well as effective recovery characteristics. Specifically, the Cu/Cu 2 O/graphene and Ni/NiO/graphene fiber sensors operating at 150 °C exhibit sensitivities of 18.90 % and 0.82 %, respectively, for 5 ppm NO 2 gas. The proposed strategy to achieve flexible graphene fiber chemiresistors by decorating them with non-noble metal and metal oxide nanoparticles opens a new avenue for realizing high-performance devices, such as photovoltaic devices, photocatalysts, and chemical catalysts. [ABSTRACT FROM AUTHOR]

• Porosity control of nanofibers: The high porosity of the metal oxide nanofibers is the key to achieving the dual sensitization owing to their high gas permeability and numerous active sites. Both saponin and water-ethanol co-solvent play critical roles in modifying morphology of nanofibers into elliptical nanofibers during electrospinning. Additionally, saponin forms numerous pores in the nanofibers when being burnt out during calcination. These porous, elliptical nanofibers possess a larger surface area and porosity.Saponin and water-ethanol co-solvent enabled porous, elliptical nanofibers to emerge. • Bifunctional Ga doping: Ga dopants enhanced sensing performance via conductivity improvement and grain growth inhibition. • Functionalization of Pt catalysts : Spill-over effects and chemical sensitization of remarkably improved C 2 H 2 sensitivity. Herein, we demonstrate a sensitization strategy via solid-solution doping and catalytic metal nanoparticles (NPs) onto porous metal oxide nanofibers (NFs) for superior acetylene (C 2 H 2) sensing capabilities. The introduction of dopants and catalysts not only increases the inherent reactivity of metal oxides, but also induces the spillover of C 2 H 2 onto metal oxides, significantly improving the sensing properties. We elucidate that the high porosity of the metal oxide NFs, prepared by electrospinning and utilizing saponin as a sacrificial template, is the key to achieving high gas permeability and numerous active sites. Consequently, Ga-doped ZnO porous NFs functionalized with Pt catalysts exhibited the highest C 2 H 2 sensing responses among the current state-of-the-art C 2 H 2 sensors (R a /R g = 26.2 at 400 °C) with a fast response time (10.2 s), at a particularly low concentration of 5 ppm. Moreover, these NFs showed excellent selectivity against the interfering gas (H 2 , C 7 H 8 , CO, CH 4 , C 8 H 10 , CH 3 COCH 3 , HCHO and C 2 H 5 OH) and outstanding stability up to 20 sensing cycles to 0.4 ppm of C 2 H 2. These results provide an efficient strategy to tailor composites of metal oxide nanostructures, dopants, and catalysts for highly sensitive gas sensors. [ABSTRACT FROM AUTHOR]