Search

To predict and explore the return period wind speed distribution in Beijing urban area, based on the short-term measured wind speed record, the measured independent storm peak samples are extracted and the Monte–Carlo numerical simulation method is used to randomly generate pseudo-independent storm peak samples with the same distribution as the independent storm peak samples. In addition, the appropriate threshold is used to select and extract the over-threshold independent storm peak samples from the measured samples. And, then, the return period wind speed of the whole wind direction is predicted. Further, the traditional Cook method is used to predict and analyze the return period wind speed of each wind direction according to the measured wind speed data. The results show that the return period wind speed prediction results of the whole wind direction corresponding to the simulated pseudo samples and the measured over-threshold samples are basically close to each other, and the maximum relative deviation is less than 7%. The mean relative deviation of the return period wind speed prediction results is about 10.6% between each wind direction and the whole wind direction, and the mean relative deviation is about 9.4% between the RPWS prediction result of each wind direction and the design value of the code. In addition, the return period wind speed prediction values of the west by southwest, northwest and north by northeast wind directions exceed the design value of the code, while the predicted values of the other wind directions are within the envelope range of the design value of the code. Finally, the research content of this paper can provide some reference for the wind resistance design analysis of building structures in Beijing area. [ABSTRACT FROM AUTHOR]

Intelligent connected vehicles (ICVs) have played an important role in improving the intelligence degree of transportation systems, and improving the trajectory prediction capability of ICVs is beneficial for traffic efficiency and safety. In this paper, a real-time trajectory prediction method based on vehicle-to-everything (V2X) communication is proposed for ICVs to improve the accuracy of their trajectory prediction. Firstly, this paper applies a Gaussian mixture probability hypothesis density (GM-PHD) model to construct the multidimension dataset of ICV states. Secondly, this paper adopts vehicular microscopic data with more dimensions, which is output by GM-PHD as the input of LSTM to ensure the consistency of the prediction results. Then, the signal light factor and Q-Learning algorithm were applied to improve the LSTM model, adding features in the spatial dimension to complement the temporal features used in the LSTM. When compared with the previous models, more consideration was given to the dynamic spatial environment. Finally, an intersection at Fushi Road in Shijingshan District, Beijing, was selected as the field test scenario. The final experimental results show that the GM-PHD model achieved an average error of 0.1181 m, which is a 44.05% reduction compared to the LiDAR-based model. Meanwhile, the error of the proposed model can reach 0.501 m. When compared to the social LSTM model, the prediction error was reduced by 29.43% under the average displacement error (ADE) metric. The proposed method can provide data support and an effective theoretical basis for decision systems to improve traffic safety. [ABSTRACT FROM AUTHOR]

Day by day pollution in cities is increasing due to urbanization. One of the biggest challenges posed by the rapid migration of inhabitants into cities is increased air pollution. Sustainable Development Goal 11 indicates that 99 percent of the world's urban population breathes polluted air. In such a trend of urbanization, predicting the concentrations of pollutants in advance is very important. Predictions of pollutants would help city administrations to take timely measures for ensuring Sustainable Development Goal 11. In data engineering, imputation and the removal of outliers are very important steps prior to forecasting the concentration of air pollutants. For pollution and meteorological data, missing values and outliers are critical problems that need to be addressed. This paper proposes a novel method called multiple iterative imputation using autoencoder-based long short-term memory (MIA-LSTM) which uses iterative imputation using an extra tree regressor as an estimator for the missing values in multivariate data followed by an LSTM autoencoder for the detection and removal of outliers present in the dataset. The preprocessed data were given to a multivariate LSTM for forecasting PM2.5 concentration. This paper also presents the effect of removing outliers and missing values from the dataset as well as the effect of imputing missing values in the process of forecasting the concentrations of air pollutants. The proposed method provides better results for forecasting with a root mean square error (RMSE) value of 9.8883. The obtained results were compared with the traditional gated recurrent unit (GRU), 1D convolutional neural network (CNN), and long short-term memory (LSTM) approaches for a dataset of the Aotizhonhxin area of Beijing in China. Similar results were observed for another two locations in China and one location in India. The results obtained show that imputation and outlier/anomaly removal improve the accuracy of air pollution forecasting. [ABSTRACT FROM AUTHOR]

Missing data presents a significant challenge when forecasting unknown data in lime series. To address this issue. this paper proposes an Altenuated Long and Short-Term Memory model based on a dec·aying filliction, which is abbreviated as A D-LSTM, for forecasting unknown data in time series. As strong correlations exist in adjacent data, the Grey model is level·aged to predict and impute missing values in small-sample datasets. To improve the accuracy offorecasting in time series with missing data, we introduce subspace decomposition, which can correct errors in the memory state cell caused by missing elements, and a time decay function, which utilizes the number of adjacent continuous missing data as a weight to modify the memory cell and enables the model to detect the existence of missing elements, into the LSTM unit. These enhancements reduce the impact of imptited data on model training in time series analysis. Finally, to verify the effectiveness of our proposed method, we conduct experimental validation and comparative analysis using the Beijing house price dataset. Our results indicate that the AD-LSTM model perfbrnis better in reducing the impact of missing data and achieving lower fbrecast ert·ors compared to the baseline models. [ABSTRACT FROM AUTHOR]

Surface settlement is one of the key engineering issues during shield construction process. In order to accurately predict surface settlement, this paper proposes a new machine learning method based on relevance vector machine (RVM), principal component analysis (PCA), and particle swarm optimization (PSO). Taking Beijing Metro Line 6 as a case study, the PCA-PSO-RVM model is used to make the prediction and compared with the prediction results of the RVM model using the same samples. In order to evaluate the reliability of the model, three evaluation indexes including mean relative error (MRE), root mean square error (RMSE), and Theil inequality coefficient (TIC) were calculated, and sensitivity analysis was carried out on them. The results show that the minimum relative error between PCA-PSO-RVM and the actual value is only 0.06%. The calculated MRE, RMSE, and TIC are 0.17%, 0.0714 mm, and 0.027%, respectively, which shows that PCA-PSO-RVM model has higher prediction accuracy, smaller deviations, and higher reliability compared with the three other models. Through sensitivity analysis, it is found that the weighted average internal friction angle (φ) has the most significant impact on the surface settlement, which should be focused on in relevant research. [ABSTRACT FROM AUTHOR]

Ensemble forecasting systems have become an important tool for estimating the uncertainties in initial conditions and model formulations and they are receiving increased attention from various applications. The Regional Ensemble Prediction System (REPS), which has operated at the Beijing Meteorological Service (BMS) since 2017, allows for probabilistic forecasts. However, it still suffers from systematic deficiencies during the first couple of forecast hours. This paper presents an integrated probabilistic nowcasting ensemble prediction system (NEPS) that is constructed by applying a mixed dynamic-integrated method. It essentially combines the uncertainty information (i.e., ensemble variance) provided by the REPS with the nowcasting method provided by the rapid-refresh deterministic nowcasting prediction system (NPS) that has operated at the Beijing Meteorological Service (BMS) since 2019. The NEPS provides hourly updated analyses and probabilistic forecasts in the nowcasting and short range (0–6 h) with a spatial grid spacing of 500 m. It covers the three meteorological parameters: temperature, wind, and precipitation. The outcome of an evaluation experiment over the deterministic and probabilistic forecasts indicates that the NEPS outperforms the REPS and NPS in terms of surface weather variables. Analysis of two cases demonstrates the superior reliability of the NEPS and suggests that the NEPS gives more details about the spatial intensity and distribution of the meteorological parameters. [ABSTRACT FROM AUTHOR]

The air quality index (AQI), as an indicator to describe the degree of air pollution and its impact on health, plays an important role in improving the quality of the atmospheric environment. Accurate prediction of the AQI can effectively serve people's lives, reduce pollution control costs and improve the quality of the environment. In this paper, we constructed a combined prediction model based on real hourly AQI data in Beijing. First, we used singular spectrum analysis (SSA) to decompose the AQI data into different sequences, such as trend, oscillation component and noise. Then, bidirectional long short-term memory (BiLSTM) was introduced to predict the decomposed AQI data, and a light gradient boosting machine (LightGBM) was used to integrate the predicted results. The experimental results show that the prediction effect of SSA-BiLSTM-LightGBM for the AQI data set is good on the test set. The root mean squared error (RMSE) reaches 0.6897, the mean absolute error (MAE) reaches 0.4718, the symmetric mean absolute percentage error (SMAPE) reaches 1.2712%, and the adjusted R2 reaches 0.9995. [ABSTRACT FROM AUTHOR]

The predictions from time series data can help us sense development trends and make scientific decisions in advance. The commonly used forecasting methods with backpropagation consume a lot of computational resources. The deep echo state network (DeepESN) is an advanced prediction method with a deep neural network structure and training algorithm without backpropagation. In this paper, a Bayesian optimization algorithm (BOA) is proposed to optimize DeepESN to address the problem of increasing parameter scale. Firstly, the DeepESN was studied and constructed as the basic prediction model for the time series data. Secondly, the BOA was reconstructed, based on the DeepESN, for optimal parameter searching. The algorithm is proposed within the framework of the DeepESN. Thirdly, an experiment was conducted to verify the DeepESN with a BOA within three datasets: simulation data generated from computer programs, a real humidity dataset collected from Beijing, and a power load dataset obtained from America. Compared with the models of BP (backpropagation), LSTM (long short-term memory), GRU (gated recurrent unit), and ESN (echo state network), DeepESN obtained optimal results, which were 0.0719, 18.6707, and 764.5281 using RMSE evaluation. While getting better accuracy, the BOA optimization time was only 323.4 s, 563.2 s, and 9854 s for the three datasets. It is more efficient than grid search and grey wolf optimizer. [ABSTRACT FROM AUTHOR]

Air quality plays a vital role in people's health, and air quality forecasting can assist in decision making for government planning and sustainable development. In contrast, it is challenging to multi-step forecast accurately due to its complex and nonlinear caused by both temporal and spatial dimensions. Deep models, with their ability to model strong nonlinearities, have become the primary methods for air quality forecasting. However, because of the lack of mechanism-based analysis, uninterpretability forecasting makes decisions risky, especially when the government makes decisions. This paper proposes an interpretable variational Bayesian deep learning model with information self-screening for PM2.5 forecasting. Firstly, based on factors related to PM2.5 concentration, e.g., temperature, humidity, wind speed, spatial distribution, etc., an interpretable multivariate data screening structure for PM2.5 forecasting was established to catch as much helpful information as possible. Secondly, the self-screening layer was implanted in the deep learning network to optimize the selection of input variables. Further, following implantation of the screening layer, a variational Bayesian gated recurrent unit (GRU) network was constructed to overcome the complex distribution of PM2.5 and achieve accurate multi-step forecasting. The high accuracy of the proposed method is verified by PM2.5 data in Beijing, China, which provides an effective way, with multiple factors for PM2.5 forecasting determined using deep learning technology. [ABSTRACT FROM AUTHOR]

Accurate monitoring of air quality can no longer meet people's needs. People hope to predict air quality in advance and make timely warnings and defenses to minimize the threat to life. This paper proposed a new air quality spatiotemporal prediction model to predict future air quality and is based on a large number of environmental data and a long short-term memory (LSTM) neural network. In order to capture the spatial and temporal characteristics of the pollutant concentration data, the data of the five sites with the highest correlation of time-series concentration of PM2.5 (particles with aerodynamic diameter ≤2.5 mm) at the experimental site were first extracted, and the weather data and other pollutant data at the same time were merged in the next step, extracting advanced spatiotemporal features through long- and short-term memory neural networks. The model presented in this paper was compared with other baseline models on the hourly PM2.5 concentration data set collected at 35 air quality monitoring sites in Beijing from January 1, 2016, to December 31, 2017. The experimental results show that the performance of the proposed model is better than other baseline models. [ABSTRACT FROM AUTHOR]

With the development of modern cities, urban rail transit has become an indispensable part of residents' travelling mode, and accurate prediction of urban rail transit passenger flow is particularly important. However, due to the non-linearity and non-stability of passenger flow, the low quality of big data and the lack of data make it more and more difficult to predict the passenger flow of urban rail transit. In this paper, we propose a unique model structure that ingeniously integrates Gated Recurrent Units (GRU), Convolutional Neural Networks (CNN) with fused residual network connections, and a self-attention mechanism. The design of this model is primarily to effectively handle complex and low-quality data, which is often prevalent in passenger flow prediction scenarios. To validate the effectiveness of the proposed model, we used data from the Beijing urban rail transit in 2016 for prediction. In the experiments, we performed comparison study and ablation study. The experimental results show that the model proposed in this paper has significantly improved prediction accuracy in both horizontal and vertical comparisons. This outcome substantiates that the proposed model can not only effectively handle complex and low-quality data but also extract short-term features and long-term dependency features of passenger flow well, thereby achieving more accurate predictions. • Integration of GRU, CNN with fused residual connections, and self-attention mechanism constitutes a novel model. • The model is capable of handling complex and lower-quality data, significantly improving the accuracy of predictions. • The model can simultaneously extract short-term features and long-term dependency features from time series. [ABSTRACT FROM AUTHOR]

Since the limitation of carbon emissions, China's photovoltaic (PV) industry has developed vigorously, while some traditional heavy industries have been violently hit. Therefore, the industrial production data exhibits significant nonlinear and complexity characteristics, which may affect prediction accuracy, thus hindering the corresponding department's decision-making. Consequently, a novel structure-adaptive fractional Bernoulli grey model is presented in this paper to surmount this toughie, and the core innovations can be summarized as follows. Initially, a novel time function term is utilized to depict the accumulative time effect, which can smoothly represent the dynamic variations and significantly strengthen the robustness of the new model. Besides, the fractional-order accumulation technique, which could effectively improve the predicting accuracy, is employed in the proposed model. Furthermore, the adaptability and generalizability of the proposed model can be enhanced by the self-adaptive parameters optimized by the Particle Swarm Optimization. For illustration and verification purposes, experiments on forecasting the annual output of Photovoltaic modules in China and the annual output of steel in Beijing are compared with a range of benchmarks, including the classic GM (1, 1), conventional econometric technology, and machine learning methods. And the results confirmed that the proposed model is superior to all benchmark models, which indicates that the novel model is indeed suitable for industrial production forecasting. [ABSTRACT FROM AUTHOR]

Traffic prediction is the cornerstone of intelligent transportation system. In recent years, graph neural network has become the mainstream traffic prediction method due to its excellent processing ability of unstructured data. However, the network relationship in the real world is more complex. Multiple nodes and various associations such as different types of stations and lines in rail transit always exist at the same time. In an end-to-end model, the training accuracy will suffer if the same weights are assigned to multiple views. Thus, this paper proposes a framework with multi-view and multi-layer attention, which aims to solve the problem of node prediction involving multiple relationships. Specifically, the proposed model maps multiple relationships into multiple views. A graph convolutional neural network of multiple views with multi-layer attention learns the optimal regression of nodes. Furthermore, the model uses an autoencoder module to alleviate the over-smoothing problem during the training phase. With the historical dataset of Beijing rail transit, the experiment proves that the prediction accuracy of the model is generally better than the baseline traffic prediction algorithms. [ABSTRACT FROM AUTHOR]

The accurate prediction of short-term passenger flow is of high importance to efficiently manage the passenger flow of metro systems and adjust timetable accordingly. However, the existing methods of passenger flow prediction cannot achieve adequate accurate results due to its complex nonlinear spatiotemporal characteristics. To improve the accuracy of short-term passenger flow prediction, this paper proposes a deep learning model based on a spatiotemporal framework. Firstly, the graph convolutional network, which incorporates prior domain knowledge (such as travel time and origin–destination demand), is used to extract spatial features of passenger flow. Secondly, the attention mechanism is integrated into the gated recurrent unit to extract the time correlation of passenger flow. Finally, external factors are introduced to capture their impact on passenger flow as well. A case study of the Beijing Subway system is illustrated to verify the performance of the proposed model. The results show that compared with the existing models, the proposed model achieves the highest prediction accuracy and strong robustness. Furthermore, we demonstrate that the adjacency matrix based on travel time outperforms the one based on OD demand, especially during evening peak hours. In addition, it is also verified that the attention mechanism and external factors can improve the prediction performance of the proposed model. [ABSTRACT FROM AUTHOR]

The rapid adoption of electric vehicles (EVs) has led to dramatic increase in charging demands that poses great challenges for efficient charging infrastructure rollout and operation. It is crucial to accurately assess charging demand in urban areas to optimize the siting and sizing of charging infrastructure. This paper proposes a novel urban charging load forecasting model for private passenger EVs based on massive operating data of EVs in Beijing. First, the characteristics of travel patterns for private passenger EVs, urban road network, functional area distribution and charging infrastructure distribution within the entire Beijing area are identified. Then a charging load forecasting model that can simultaneously simulate trip chains for EVs is constructed by considering the occupancy states of public charging piles and the interactions among different EVs. Finally, the effectiveness of the proposed charging load forecasting model is verified based on comprehensive test data. Our findings imply that the number of EVs at recharge and the charging power can be reliably predicted with the accuracy of over 84.73 % and 81.92 %, respectively. It provides the foundation for optimal charging infrastructure planning and charging scheduling. [ABSTRACT FROM AUTHOR]

Compared with mechanism-based modeling methods, data-driven modeling based on big data has become a popular research field in recent years because of its applicability. However, it is not always better to have more data when building a forecasting model in practical areas. Due to the noise and conflict, redundancy, and inconsistency of big time-series data, the forecasting accuracy may reduce on the contrary. This paper proposes a deep network by selecting and understanding data to improve performance. Firstly, a data self-screening layer (DSSL) with a maximal information distance coefficient (MIDC) is designed to filter input data with high correlation and low redundancy; then, a variational Bayesian gated recurrent unit (VBGRU) is used to improve the anti-noise ability and robustness of the model. Beijing's air quality and meteorological data are conducted in a verification experiment of 24 h PM2.5 concentration forecasting, proving that the proposed model is superior to other models in accuracy. [ABSTRACT FROM AUTHOR]

More accurate multivariate load forecasting is conducive to integrated energy system planning optimization and economic operation. In this paper, based on the consideration of exogenous factors such as weather, endogenous factors are added into the prediction, and a short-term prediction model for integrated energy multivariate load based on endo-exogenous uncertainty is established using fine-tuned transfer learning. The LSTM pre-training model is first initially established using genetic algorithm and exogenous factors such as weather. Then the exogenous uncertainty of the pre-training model and the knowledge of endogenous uncertainty in the target model are combined using fine-tuned transfer learning to continuously optimize the basic parameters of the prediction model to obtain the final multivariate load prediction model. The performance of the four models is comprehensively evaluated after the historical load validation of the integrated energy system in Beijing, China. Compared with the traditional LSTM multivariate load forecasting model, the MAPE of the proposed model in this paper is reduced by 21.03 %, 13.00 %, and 24.39 % for electricity, heat, and cooling load forecasting, respectively. • The coupling mechanism between multiple energy sources of the integrated energy system is analyzed. • An endogenous-exogenous uncertainty method is proposed to extract the dynamic coupling relationship between multiple loads. • An endogenous-exogenous uncertainty-based GA-LSTM multivariate load prediction model is developed. • Optimizing model parameters using fine-tuned migration learning to deepen the impact of endo-exogenous uncertainty. [ABSTRACT FROM AUTHOR]

• Accurate risk path forecasting in rail transit systems is a significant and challenging task. • A probabilistic deep learning framework that can process multisource data for risk path forecasting. • The model can effectively handle safety issues such as cascade failures. Failure-related urban rail events can disrupt transit system operations and traffic flow and lead to serious safety problems worldwide. A domino effect can occur if potential cascading events of major failures are not effectively mitigated and controlled. Therefore, accurate risk path forecasting in rail transit systems is a significant and challenging task. Because of the limitations of traditional models in terms of computational power and feature extraction capabilities, this paper proposes a probabilistic deep learning framework that can process multisource data for risk path forecasting in urban rail transit. This paper first proposes a method for constructing a large-scale risk path ground truth dataset when fault events occur. Then, the framework uses a graph-based feature mapping method to model social media, passenger flow, and station failure information. Finally, we proposed a spatiotemporal feature extractor and a dynamic difference weighting loss function to extract features and optimize parameters. We apply real-world data from 2018 to 2019 from the Beijing urban rail transit system for experimental analysis. The analyzed results demonstrate that the proposed model exceeds the baseline models by at least 2.9% in terms of F 1 value, fusing multi-source data exceeds using single-source data by at least 14% in terms of F 1 value and the proposed attention mechanism and dynamic loss function weights can effectively improve the forecasting performance of the model. Furthermore, the results of the different steps ahead demonstrate that the above results are robust. The application of the model can effectively handle safety issues such as cascade failures. [ABSTRACT FROM AUTHOR]

Persistent PM 2.5 pollution poses a serious threat to human health. Developing an accurate urban regional PM 2.5 forecasting is of practical significance for environmental protection. However, previous studies have mostly focused on individual monitoring stations, neglecting the influence of neighboring stations, which limits forecasting accuracy. Additionally, the PM 2.5 of a single monitoring station cannot reflect the overall situation of a region. Therefore, this paper develops a novel PM 2.5 spatiotemporal forecasting framework that combines graph convolutional module, temporal convolutional module, linear module. It enables the forecasting of PM 2.5 concentrations at multiple stations and multiple time steps in the future. Concretely, we utilize a mixed graph convolutional network to extract the spatial features of PM 2.5. Then, an improved temporal convolutional network, the second-order residual temporal convolutional network, is developed to capture complex temporal features. Following the classical "linear and non-linear" modeling strategy, a linear module is added to the forecasting framework. Experiments on the real air pollution dataset from Beijing demonstrate that our framework outperforms the state-of-the-art baselines. • Extracting and fusing spatiotemporal features of PM2.5 is crucial for prediction. • A novel spatiotemporal forecasting framework is proposed. • A second-order residual TCN is developed to extract complex temporal features. • Experiments on real air pollution dataset show our framework's superiority. [ABSTRACT FROM AUTHOR]

[Display omitted] • Propose variational mode decomposition optimized by capuchin search algorithm. • Propose a prediction model of optimized LSTM by pelican optimization algorithm. • Consider error sequence, and propose the error correction module CVMD-POA-LSTM. • Propose a new hybrid prediction model for PM2.5 concentration, named CEEMDAN-ApEn-CVMD-POA-LSTM-EC. • In this paper, all data and code links are shared on GitHub. With the acceleration of urbanization leading to a general decrease in air quality, accurate PM2.5 concentration prediction is of the utmost practical meaning for the control and prevention of air pollution in the region. Therefore, a new hybrid prediction model for PM2.5 concentration based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), approximate entropy (ApEn), variational mode decomposition optimized by capuchin search algorithm (CVMD), long short-term memory optimized by pelican optimization algorithm (POA-LSTM) and error correction (EC), named CEEMDAN-ApEn-CVMD-POA-LSTM-EC, is proposed. First, CEEMDAN is used to acquire a limited amount of intrinsic mode functions (IMFs). Second, calculate ApEn value for each IMF component, and divide each IMF component into high-complexity and low-complexity components by the size of ApEn values. Third, variational mode decomposition optimized by capuchin search algorithm (CVMD), named CVMD, is proposed. CVMD is used as a secondary decomposition method to further decompose high-complexity components adaptively into a finite number of IMFs. Fourth, long short-term memory optimized by pelican optimization algorithm, named POA-LSTM, is proposed. POA-LSTM predicts all IMF components, and the results of their predictions are combined to generate the original prediction results. Final, error sequence is decomposed and predicted again by the EC module CVMD-POA-LSTM to obtain prediction results of error sequence, and final prediction results are acquired by combining original prediction results and prediction results of error sequence. The datasets in Beijing, Shanghai, and Xi'an were selected for simulation experiments to demonstrate the superiority of the proposed model. Taking Beijing as an example, RMSE, MAE, MAPE and R2 values are 1.9947, 1.5577, 0.1157 and 0.9947, which are superior to other comparison models and have the best performance. [ABSTRACT FROM AUTHOR]

• A deep learning approach to predicting the electric vehicle (EV) charging demand. • A real-world large EV trajectory dataset was used for model training and validation. • The deep learning approach outperformed traditional time series prediction models. • Input data structures, and sample sizes were not influential to prediction accuracy. Short-term prediction of the Electric Vehicle (EV) charging demand is of great importance to the operation of EV fleets and charging stations. This paper develops a Long Short-Term Memory (LSTM) neural network to predict the EV charging demand at the station level for the next few hours (e.g., 1–5 h), using a unique trajectory dataset containing over 76,000 private EVs in Beijing in January 2018. To explore the performance of the LSTM model, we set up four scenarios by 1) comparing LSTM against two typical time series prediction models, i.e., the Auto-Regressive Moving Average model (ARIMA), and the Multiple Layer Perceptron model (MLP), 2) and investigating how different input data structures, sample sizes, and time spans and intervals would influence model accuracy. The results suggest that the LSTM model outperformed the ARIMA, and MLP models, and their MAPE1 values are 6.83 %, 21.58 %, and 18.31 %, respectively. In addition, we find that the time span and interval tend to be more influential to the LSTM model's prediction accuracy than input data structures, and sample sizes. In general, the LSTM model with a shorter time span or interval (e.g., 1 h) would perform better. [ABSTRACT FROM AUTHOR]

The green growth of Beijing-Tianjin-Hebei (BTH) urban agglomeration plays a leading and exemplary role in overcoming internal resource restrictions, addressing climate change, and supporting China's high-quality growth. From the standpoint of pollution reduction and carbon reduction, this paper first conducts a comprehensive evaluation of the environmental impact based on combined weighting technique. The Logarithmic Mean Divisia Index (LMDI) model is used to decompose the environmental impact drivers in distinct areas. A decoupling effort index is further constructed to measure the effect of various efforts on the decoupling of economic growth and environmental impact, the improved grey Markov model is applied to predict the future trend of regional decoupling efforts. The results of empirical analysis based on data of the BTH region during 2011–2018 show that: 1) the environmental impact index of Beijing is the lowest followed by Tianjin and Hebei; 2) environmental regulation exerts the most significant impact on reducing environmental pressure in Beijing while technology progress and energy intensity have the most significant effect on easing environmental pressure in Tianjin; 3) strong decoupling efforts have been found in Beijing, Tianjin and Hebei, however, such effect is more significant in Beijing; 4) Beijing's decoupling state is mostly driven by regulatory effect, intensity effect, and scale effect, while Tianjin and Hebei's decoupling states are primarily driven by improvements in environmental regulation and energy intensity; 5) according to the forecast outcome of the improved grey Markov technique, a state of strong decoupling effort will be maintained in the BTH area by 2025, and the decoupling effort index in Beijing will remain the highest while the index in Hebei will remain the lowest. • A comprehensive evaluation of the environmental impact of BTH based on combined weighting method is estimated. • Determinants of environmental impact is decomposed as regulatory, technological, intensity, growth and scale effects. • LMDI model is constructed to estimate the five determinants of regional environmental impact. • Decoupling effort approach and improved grey Markov model are used to analyze and predict the status of various decoupling efforts. • Various suggestions are proposed from the perspective of regional heterogeneity. [ABSTRACT FROM AUTHOR]

Building load forecasting is critical for energy saving and carbon emission reduction, as building loads account for a rising percentage of energy consumption. Existing load forecasting methods only target a single building and do not consider the spatial characteristics of different building loads in an architectural complex, making it impossible to effectively forecast loads for all buildings in an architectural complex simultaneously. In this paper, considering the spatial correlation among building loads in an architectural complex, a novel short-term load forecasting method is proposed to improve the load forecasting accuracy for the architectural complex. First, Pearson correlation analysis is carried out to determine the key influencing factors of load, which are treated as multi-information. Then, to realize the load forecasting of all buildings in an architectural complex at the same time, a multi-information fusion model combined with a graph convolutional network and a long-short term memory network is proposed, and spatio-temporal attention modules are included to extract the dynamic spatio-temporal correlations of load. The performance of the proposed model is evaluated using actual load data from a public university in Beijing. When compared to other current methods, the experimental results show that the proposed model not only achieves the best results for architectural complex load forecasting (the largest MAPE is only 6.86%, the smallest R2 and Accuracy reach 0.87 and 0.85, respectively), but also maintains forecasting stability to some extent over a longer forecast period. The proposed method is a meaningful step towards achieving fast and accurate architectural complex load forecasting. [ABSTRACT FROM AUTHOR]

Load forecasting analysis plays an important role for regional electric power project planning as well as consumption management. For improving the long-term load forecasting accuracy and usability, this paper proposes a new residual-type combined Grey Model-Least Squares Support Vector Machine forecasting model for the component loads by extracting the load characteristics. In this model, each component decomposed load is forecasted using characteristic-matched model. Meanwhile, Moran's I and α convergence are used to identify the spatial-temporal distribution characteristics and levels of electric consumption intensity from the perspective of spatial econometrics. The results show that the proposed model can improve the forecasting accuracy, and can avoid the poor usability in the application phase. According to a case study for Beijing, the electric consumption intensity of the city has a positive spatial correlation, and the low electric consumption intensity districts are mainly concentrated in the central region, which reveals a trend of spreading from the center to periphery. The overall electric consumption intensity shows a downward trend, but the internal differences increase with time. The results may help to carry out electric construction planning, and to formulate regionally energy-saving policies. • Electric load characteristics are captured with Empirical Mode Decomposition. • The component decomposed loads are forecasted by characteristic-matched models. • Building a residual-type combined Grey Model-Least Squares Support Vector Machine model for load forecasting. • Electric anomalies and substitution potential districts are identified from spatial econometrics. • Analyzing convergence trend and level of electric consumption intensity. [ABSTRACT FROM AUTHOR]

• A hybrid technique is presented to predict underground train induced vibration. • This prediction is based on transfer function experiments in a borehole or tunnel. • A vehicle-track model is used to obtain excitation forces acting on tunnel invert. • More accurate prediction can be expected compared to other approaches. The accurate prediction of ground-borne vibration induced by underground trains is needed to assess the effects of vibration. However, there are inaccuracy and uncertainty for current empirical and numerical approaches due to theoretical assumptions, simplifying modeling and uncertainty of parameters. To reduce the inaccuracy and uncertainty, this paper presents a prediction strategy based on the transfer function experiment in a borehole or tunnel. The frequency-domain dynamic response in the ground can be determined from the excitation forces applied on the tunnel invert and the transfer functions in the experiment. A vehicle-track model is established to obtain the excitation forces, and the transfer functions are measured in the hammer impact experiments in a borehole or tunnel. Validation of this approach is provided by comparison to the measured response on a metro line in Beijing. It is shown that more accurate prediction can be expected by this approach as the actual transfer characteristics of vibration in the ground are measured. [ABSTRACT FROM AUTHOR]

With the boom of big data, the Internet contains more and more personal behavior information, but it is difficult to extract effectively. A model involving multivariate processing capability must be constructed to deal with these time series with complex characteristics. In this paper, a novel hybrid model embedding Baidu Search Index is therefore proposed to implement multi-step ahead subway passenger flow forecasting. Firstly, we collect data from informative Baidu Search Index, reduce dimensionality, and screen out the powerful predictors by statistical analysis. Secondly, we extract matching common modes at similar time scales between the subway passenger flow and screened Baidu Search Index via multivariate mode decomposition being optimized by multi-objective algorithm. Furthermore, to eliminate pseudo statistical causality, we select the optimal combination of modal components between subway passenger flow and its corresponding Baidu Search Index at each time scale by an innovative multi–modal analysis strategy. Thirdly, we reconstruct the forecasting values of each selected optimal combination as the final results. The empirical results of Beijing, Shanghai and Guangzhou show that the proposed model can significantly outperform six benchmark models in both the level and directional accuracy. So introducing Baidu Search Index creates a sound opportunity to enhance the subway passenger flow forecasting ability. [ABSTRACT FROM AUTHOR]

• A force identification methodology based on measurement is proposed. • Wheel-rail contact force can be identified accurately by this model. • The identified force can be used to predict train-induced ground-borne vibration. Wheel-rail interaction plays an important role in the study of railway engineering. The wheel-rail contact forces (WCFs) are the key factors in the models addressing wheel-rail interaction. However, it is sometimes difficult to be measured, so an indirect identification methodology is proposed in this paper. Based on an analytical model and measurement, the vertical WCF can be determined. Using measured rail accelerations as input data, a calculation program is developed. The vertical WCF and the excitation forces transmitted from the vehicle-rail system to the roadbed can be obtained. The latter forces are used to predict the train-induced ground-borne vibrations. A case study of predicting ground-borne vibration in Beijing Metro is presented to verify the effectiveness of this method. The results show that the vertical WCF can be obtained efficiently and accurately, and the predicted ground-borne vibrations have good agreement with the measured ones. [ABSTRACT FROM AUTHOR]