Search

This paper studies an unmanned aerial vehicle (UAV)-assisted wireless powered IoT network, where a rotary-wing UAV adopts fly-hover-communicate protocol to successively visit IoT devices in demand. During the hovering periods, the UAV works on full-duplex mode to simultaneously collect data from the target device and charge other devices within its coverage. Practical propulsion power consumption model and non-linear energy harvesting model are taken into account. We formulate a multi-objective optimization problem to jointly optimize three objectives: maximization of sum data rate, maximization of total harvested energy and minimization of UAV’s energy consumption over a particular mission period. These three objectives are in conflict with each other partly and weight parameters are given to describe associated importance. Since IoT devices keep gathering information from the physical surrounding environment and their requirements to upload data change dynamically, online path planning of the UAV is required. In this paper, we apply deep reinforcement learning algorithm to achieve online decision. An extended deep deterministic policy gradient (DDPG) algorithm is proposed to learn control policies of UAV over multiple objectives. While training, the agent learns to produce optimal policies under given weights conditions on the basis of achieving timely data collection according to the requirement priority and avoiding devices’ data overflow. The verification results show that the proposed MODDPG (multi-objective DDPG) algorithm achieves joint optimization of three objectives and optimal policies can be adjusted according to weight parameters among optimization objectives. [ABSTRACT FROM AUTHOR]

In this paper, we leverage reinforcement learning (RL) and cross-layer network coding (CLNC) for efficiently pre-fetching requested contents to the local caches and delivering these contents to requesting users in a downlink fog-radio access network (F-RAN) with device-to-device (D2D) communications. In the considered system, fog access points (F-APs) and cache-enabled D2D (CE-D2D) users are equipped with local caches that alleviate traffic burden at the fronthaul and facilitate rapid delivery of the users’ contents. To this end, the CLNC scheme optimizes the coding decisions, transmission rates, and power levels of both F-APs and CE-D2D users, and RL scheme optimizes caching strategy. A joint content placement and delivery problem is formulated as an optimization problem with a goal to maximize system sum-rate. The problem is an NP-hard problem. To efficiently solve it, we first develop an innovative decentralized CLNC coalition formation (CLNC-CF) switch algorithm to obtain a stable solution for the content delivery problem, where F-APs and CE-D2D users utilize CLNC resource allocation. By considering statistics of channel and users’ content request into account, we then develop a multi-agent RL algorithm for optimizing the content placement at both F-APs and CE-D2D users. Simulation results show that the proposed joint CLNC-CF-RL framework can effectively improve the sum-rate by up to 30%, 60%, and 150%, respectively, compared to: 1) an optimal uncoded algorithm, 2) a standard rate-aware-NC algorithm, and 3) a benchmark classical NC with network-layer optimization. [ABSTRACT FROM AUTHOR]

Edge federated learning (FL) is an emerging paradigm that trains a global parametric model from distributed datasets based on wireless communications. This paper proposes a unit-modulus over-the-air computation (UMAirComp) framework to facilitate efficient edge federated learning, which simultaneously uploads local model parameters and updates global model parameters via analog beamforming. The proposed framework avoids sophisticated baseband signal processing, leading to low communication delays and implementation costs. Training loss bounds of UMAirComp FL systems are derived and two low-complexity large-scale optimization algorithms, termed penalty alternating minimization (PAM) and accelerated gradient projection (AGP), are proposed to minimize the nonconvex nonsmooth loss bound. Simulation results show that the proposed UMAirComp framework with PAM algorithm achieves a smaller mean square error of model parameters’ estimation, training loss, and test error compared with other benchmark schemes. Moreover, the proposed UMAirComp framework with AGP algorithm achieves satisfactory performance while reduces the computational complexity by orders of magnitude compared with existing optimization algorithms. Finally, we demonstrate the implementation of UMAirComp in a vehicle-to-everything autonomous driving simulation platform. It is found that autonomous driving tasks are more sensitive to model parameter errors than other tasks since the neural networks for autonomous driving contain sparser model parameters. [ABSTRACT FROM AUTHOR]

Range-based positioning using wireless signal has gained remarkable attention in past decades. Accurately extracting the distance information, i.e., estimating parameters of individual multipath, is of interest. It has been shown that diffuse multipath component (DMC) in wireless propagation channel has significant influence on channel estimation and, thus, the ranging performance. In addition to specular component (SC), DMC should be considered in order to improve the estimated accuracy of channel paths’ parameters and, thus, the ranging performance. In this paper, we extend the quasi-maximum likelihood space-alternating generalized expectation-maximization (SAGE) algorithm by incorporating an autoregressive moving average (ARMA) filter to estimate the channel parameters under the presence of DMC. The parameters of both DMC and SC are estimated in an iterative approach, where the DMC is assumed as colored noise and the ARMA-filter is used to estimate the contributions from DMC. The validation of the algorithm based on measured data shows that both SC and DMC can be accurately estimated by the proposed approach. A comparison with standard SAGE and AR-SAGE is conducted, where the results reveal that the proposed method outperforms other two approaches in terms of ranging accuracy. [ABSTRACT FROM AUTHOR]

In this paper, an intelligent reflecting surface (IRS) is deployed to assist the terahertz (THz) communications. The sum-rate of user equipments (UEs) is maximized while guaranteeing the rate requirement of each UE. A block coordinate searching (BCS) algorithm is proposed to jointly optimize the IRS’s coordinates, phase shifts, THz sub-bands allocation and power control. Specifically, the relaxation with penalties based (RPB) algorithm is developed to obtain feasible coordinates of the IRS and guarantee the monotonicity of objective value. In addition, the IRS phase shifts are formulated as closed-form expressions with introduced pricing factors. Simulation results show that the proposed scheme can significantly enhance system performance. [ABSTRACT FROM AUTHOR]

In this paper, we consider a computation offloading problem in a three-tier network consisting of multiple mobile users (MUs), multiple edge clouds, and a central cloud. On this basis, we formulate a system Energy Time Cost ($ETC$) minimization problem by jointly optimizing the resource allocation, mobile-edge matching decision, and offloading decision. Due to the difficulty of directly solving the formulated problem, we decompose it and propose two offloading algorithms, namely Gale-Shapley based Minimum/Sequential Offloading Algorithm (GS-MOA/GS-SOA), to optimize offloading decisions by minimizing the system $ETC$ , in which the mobile-edge matching strategies based on the proposed Gale-Shapley based Mobile-Edge mAtching aLgorithm (GS-MEAL) and resource allocations are optimized iteratively. The simulations show the effectiveness of our proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper presents a new approach to accurately and efficiently identifying a large number of wireless devices blindly installed to known three-dimensional installation/fitting points, based on received signal strengths (RSSs) between the devices. The approach is non-trivial because of the factorial, mapping nature of the considered problem, the multiplicative ranging errors of the RSS measurements (with standard deviation of 5–7 dB), and the requirement of high mapping accuracy in many internet-of-things (IoT) applications, e.g., industrial IoT and aircraft. The consideration of a structured environment where the set of candidate node positions is known beforehand shifts the problem of interest from a pure position estimation problem to a position assignment problem. The key idea of the proposed approach is that we interpret the position mapping problem with a probabilistic graphical model, where the factorial nature of mapping (more specifically, the mutual exclusiveness of devices at every installation point) is fully captured. A max-product belief propagation is designed against the probabilistic graph, to estimate the max-marginal position distribution of each device. The Kuhn-Munkres algorithm is applied to preserve the mutual exclusiveness of devices throughout the belief propagation and to decide device locations based on the estimated position distributions. Large-scale simulations and field tests are carried out, showing that the new approach achieves close-to-100% accuracy in simulations with hundreds of blindfolded devices under RSS measurement errors with standard deviation of 5–7 dB. Our approach also achieves 100% accuracy in all field trials with 76 devices inside the cabin of a Fokker 100 airplane, dramatically outperforming baseline techniques. [ABSTRACT FROM AUTHOR]

In this paper, we investigate resource allocation for IRS-assisted green multiuser multiple-input single-output (MISO) systems. To minimize the total transmit power, both the beamforming vectors at the access point (AP) and the phase shifts at multiple IRSs are jointly optimized, while taking into account the minimum required quality-of-service (QoS) of multiple users. First, two novel algorithms, namely a penalty-based alternating minimization (AltMin) algorithm and an inner approximation (IA) algorithm, are developed to tackle the non-convexity of the formulated optimization problem when perfect channel state information (CSI) is available. Existing designs employ semidefinite relaxation in AltMin-based algorithms, which, however, cannot ensure convergence. In contrast, the proposed penalty-based AltMin and IA algorithms are guaranteed to converge to a stationary point and a Karush-Kuhn-Tucker (KKT) solution of the design problem, respectively. Second, the impact of imperfect knowledge of the CSI of the channels between the AP and the users is investigated. To this end, a non-convex robust optimization problem is formulated and the penalty-based AltMin algorithm is extended to obtain a stationary solution. Simulation results reveal a key trade-off between the speed of convergence and the achievable total transmit power for the two proposed algorithms. In addition, we show that the proposed algorithms can significantly reduce the total transmit power at the AP compared to various baseline schemes and that the optimal numbers of transmit antennas and IRS reflecting elements, which maximize the system energy efficiency of the considered system, are finite. [ABSTRACT FROM AUTHOR]

In this paper we consider the problem of encoding data into repeat-free sequences in which sequences are imposed to contain any k-tuple at most once (for predefined k). First, the capacity of the repeat-free constraint are calculated. Then, an efficient algorithm, which uses two bits of redundancy, is presented to encode length-n sequences for k = 2 + 2 log (n). This algorithm is then improved to support any value of k of the form k = a log (n), for 1 < a, while its redundancy is o(n). We also calculate the capacity of repeat-free sequences when combined with local constraints which are given by a constrained system, and the capacity of multi-dimensional repeat-free codes. [ABSTRACT FROM AUTHOR]

The three-pass protocol is one of the frameworks in cryptography, which provides the privacy of exchanging information safely without distribution of secret or public keys between users. The three-pass protocol method has been put into use within a wireless network environment to transmit confidential data between two nodes with the presence of passive eavesdropper through a flat fading channel that affects the bit error rate. This led to the impact on the confidentiality of the transmission. Therefore, there are multiple challenges to ensure the confidentiality of the transmission and to improve the error rate. In this paper, the data has been encrypted using a One-Time Pad algorithm, and the channel of transmission is authenticated using Hash function. Moreover, the high values of signal to noise ratio have been increased in order to enhance the rate of bit error, so both the confidentiality of the transmission and its error rate are improved. The analysis of the flat fading channel performance is based on the perceptual quality at the rated Signal to Noise Ratio (SNR). [ABSTRACT FROM AUTHOR]

This paper investigates the energy efficiency (EE) optimization in downlink multi-cell massive multiple-input multiple-output (MIMO). In our research, the statistical channel state information (CSI) is exploited to reduce the signaling overhead. To maximize the minimum EE among the neighbouring cells, we design the transmit covariance matrices for each base station (BS). Specifically, optimization schemes for this max-min EE problem are developed, in the centralized and distributed ways, respectively. To obtain the transmit covariance matrices, we first find out the closed-form optimal transmit eigenmatrices for the BS in each cell, and convert the original transmit covariance matrices designing problem into a power allocation one. Then, to lower the computational complexity, we utilize an asymptotic approximation expression for the problem objective. Moreover, for the power allocation design, we adopt the minorization maximization method to address the non-convexity of the ergodic rate, and use Dinkelbach’s transform to convert the max-min fractional problem into a series of convex optimization subproblems. To tackle the transformed subproblems, we propose a centralized iterative water-filling scheme. For reducing the backhaul burden, we further develop a distributed algorithm for the power allocation problem, which requires limited inter-cell information sharing. Finally, the performance of the proposed algorithms are demonstrated by extensive numerical results. [ABSTRACT FROM AUTHOR]

This paper investigates a dynamic 3D trajectory design of multiple cache-enabled unmanned aerial vehicles (UAVs) in a wireless device-to-device (D2D) caching network with the goal of maximizing the long-term network throughput. By storing popular content at the nearby mobile user devices, D2D caching is an efficient method to improve network throughput and alleviate backhaul burden. With the attractive features of high mobility and flexible deployment, UAVs have recently attracted significant attention as cache-enabled flying base stations. The use of cache-enabled UAVs opens up the possibility of tracking the mobility pattern of the corresponding users and serving them under limited cache storage capacity. However, it is challenging to determine the optimal UAV trajectory due to the dynamic environment with frequently changing network topology and the coexistence of aerial and terrestrial caching nodes. In response, we propose a novel multi-agent reinforcement learning based framework to determine the optimal 3D trajectory of each UAV in a distributed manner without a central coordinator. In the proposed method, multiple UAVs can cooperatively make flight decisions by sharing the gained experiences within a certain proximity to each other. Simulation results reveal that our algorithm outperforms the traditional single- and multi-agent Q-learning algorithms. This work confirms the feasibility and effectiveness of cache-enabled UAVs which serve as an important complement to terrestrial D2D caching nodes. [ABSTRACT FROM AUTHOR]

This paper investigates a wireless powered mobile edge computing (MEC) network where a hybrid access point (H-AP) serves energy-constrained devices. For such a wireless powered MEC network, the H-AP first transmits wireless information and energy simultaneously in the downlink. Then, by utilizing the harvested energy, the device processes both its local data and the received data from the H-AP. In this system, we minimize the latency by jointly optimizing the power splitting ratio of rectifiers, the data offloading power, the local computing frequency, and the data offloading ratio at the device. By applying a polyblock outer approximation procedure, we propose an algorithm which guarantees the optimal solution. Simulation results verify the efficiency of the proposed algorithm compared to conventional schemes. [ABSTRACT FROM AUTHOR]

The measurement of received signal strength (RSS) and channel state information (CSI) has been widely used in the research of device-free localization (DFL). However, DFL systems based on these systems usually require labour-intensive training to understand the impact of the target on the surrounding wireless signals to build the target location-related model or image. In addition, the fact that the RSS is susceptible to multipath interference and is not directly accessible to CSI directly limits its actual deployment. In this paper, we explore the feasibility of DFL based on time-of-flight measurements of ultra-wideband signals, and propose a fusion method for simultaneous localization of multiple targets based on the evaluation results. Specifically, we mesh the feasible region of the target and utilize the geometric filtering method to re-evaluate the filtered wireless links in combination with the real-time adaptive relaxation target model. Consequently, we introduce the clustering method and combine the category matching strategy to ensure that the algorithm has robust real-time multi-target perception ability. Extensive experiments conducted in the lobby, laboratory and office scenarios demonstrate that the proposed method plays an active role in more than 82% and can control the mean error within 0.6 m. [ABSTRACT FROM AUTHOR]

This paper studies an intelligent reflecting surface (IRS) aided wireless powered sensor network (WPSN). Specifically, a power station (PS) provides wireless energy to multiple internet of thing (IoT) devices which supports them to deliver their own messages to an access point (AP). Moreover, we deploy an IRS to enhance the performance of the WPSN by intelligently adjusting the phase shift of each reflecting element. To evaluate the performance of the IRS assisted WPSN, we maximize its sum throughput to jointly optimize the phase shift matrices and the transmission time allocations. Due to the non-convexity of the formulated optimization problem, we first derive the optimal phase shifts of the wireless information transfer (WIT) in closed-form. Consequently, a semi-definite programming (SDP) relaxed approach is considered to jointly design the phase shift matrix of the wireless energy transfer (WET) and the transmission time allocations. In addition, we propose a low complexity scheme to gain insights and reduce the computational complexity incurred by the SDP relaxed scheme. Specifically, the optimal solutions of the phase shifts and the transmission time allocation are derived in closed-form by the Majorization-Minimization (MM) algorithm, the Lagrange dual method and the Karush-Kuhn-Tucker (KKT) conditions. Finally, numerical results are presented to validate the proposed schemes and confirm the beneficial role of the IRS in comparison to the benchmark schemes, where the proposed IRS assisted scheme achieves almost 100% higher sum throughput, in comparison to the counterpart without IRS. [ABSTRACT FROM AUTHOR]

This paper studies a novel design of user pairing and resource allocation in a simultaneous wireless information and power transfer (SWIPT)-enabled cooperative non-orthogonal multiple access (NOMA) system with coexisting power-splitting (PS) and time-switching (TS) users. In this system, near NOMA users (NUs) that are close to a source can assist the communications between the source and far NOMA users (FUs) using the energy harvested by either PS or TS strategy. The design aims to maximize the sum-rate of the system by optimizing user pairing and power allocation between NUs and FUs as well as performing PS and TS control at NUs, while guaranteeing the target data rates and the minimum harvested energy requirements of users. Since the joint design is formulated as a non-convex mixed-integer non-linear programming (MINLP) problem that is challenging to tackle, we propose a two-step user pairing and resource allocation algorithm. Specifically, we decouple the original problem into an inner resource allocation problem and an outer user pairing problem. For the inner problem, we propose successive convex approximation (SCA) and block coordinate descent (BCD)-based algorithms to perform power allocation as well as PS and TS control iteratively, with the algorithms’ convergence being theoretically proved. By exploiting the characteristics of the outer problem of user pairing, this problem is well tackled by the Hungarian algorithm. Simulation results demonstrate the proposed joint design yields better performance gains than the existing schemes. [ABSTRACT FROM AUTHOR]

Deep neural networks (DNNs) have been widely applied for classification tasks in wireless communications such as link scheduling, user association and base station (BS) muting. When training a DNN using datasets with highly-skewed class distribution where most data belong to a few majority classes, learning performance for minority classes will degrade since the imbalanced data forces the training process to be biased towards the majority classes. In many wireless problems, multiple decisions for classification are made jointly, say deciding which BSs in a network should be muted to avoid interference. In this paper, we employ DNN to learn an optimal predictive interference coordination policy, and strive to avoid biased learning in such a multi-label multi-class classification problem. The major contribution is proposing a training method to encourage fairness among classes by minimizing the maximal cost of decisions among classes, which is converted into a problem to optimize the weighting factors on the training cost of each class. We provide a gradient descent algorithm to optimize the weighting factors and the model parameters of the DNN by alternative updates. Simulation results show that the training method can improve the learning performance for the minority class and can achieve higher network utility than existing training methods. [ABSTRACT FROM AUTHOR]

In Vehicle-to-Everything (V2X) networks, where all vehicles and infrastructures are interconnected for information sharing, data dissemination is increasingly playing a significant role in superior and pluralistic communication services. To empower the efficiency of data dissemination, in this paper, we propose a novel unmanned aerial vehicle (UAV)-enabled scheduling protocol consisting of a proactive caching policy and a file sharing strategy in V2X networks. In the proactive caching process, we deploy UAVs as flying base stations (BSs) with caching capability, where we propose a UAV dynamic trajectory scheduling (DTS) algorithm to optimize the caching duration. Whereas in the file sharing strategy, based on the previous vehicular caching status, we provide a framework of file sharing cycle for data dissemination scheduling and employ a channel prediction algorithm to alleviate communication overhead. Moreover, we propose a relay ordering algorithm to effectively improve the file sharing process. Simulation results demonstrate that, our proposed scheduling protocol can enhance the efficiency of data dissemination and achieve an improved network performance in terms of caching process, system throughput, and file sharing latency in V2X networks. [ABSTRACT FROM AUTHOR]