Search

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water. [ABSTRACT FROM AUTHOR]

The potential of paper and paperboard as fiber-based materials capable of replacing conventional polymer-based materials has been widely investigated and evaluated. Due to paper's limited extensibility and inherent heterogeneity, local structural variations lead to unpredictable local mechanical behavior and instability during processing, such as mechanical forming. To gain a deeper understanding of the impact of mechanical behavior and heterogeneity on the paper forming process, the Finite Element Method (FEM) coupled with continuum modeling is being explored as a potential approach to enhance comprehension. To achieve this goal, utilizing experimentally derived material parameters alongside stochastic finite element methods allows for more precise modeling of material behavior, considering the local material properties. This work first introduces the approach of modeling heterogeneity or local material structure within continuum models, such as the Stochastic Finite Element Method (SFEM). A fundamental challenge lies in accurately measuring these local material properties. Experimental investigations are being conducted to numerically simulate mechanical behavior. An overview is provided of experimental methods for material characterization, as found in literature, with a specific focus on measuring local mechanical material structure. By doing so, it enables the characterization of the global material structure and mechanical behavior of paper and paperboard. [ABSTRACT FROM AUTHOR]

This research investigated the influence of the layered structure of paper on its selected strength properties. Two types of cellulose pulp were used: unbleached kraft pine pulp (UBSK) and unrefined bleached birch kraft pulp (BHK). Multi-ply papers were obtained from layers of appropriate grammage formed separately and bonded in a wet state. Paper layers were formed from primary pulps (UBSK and BHK) or their mixtures (threeply UBSK-BHK paper and three-ply UBSK-BHK-UBSK paper), from which various variants of laboratory paper samples were made. This work focused on three-layer papers. The obtained laboratory sheets were analysed for changes in tear resistance, tensile strength, bursting strength, short span compression strength (SCT), and corrugating medium test (CMT). In most cases, three-layer structures were characterised by higher strength parameters than single-layer papers. The tear strength and SCT of papers consisting of three layers formed from both mixed pulps were slightly lower than those of solid papers. The results demonstrate the feasibility of producing three-ply paper with significantly reduced variability in parameters such as elongation and bursting strength, which are inherently subject to high variability. [ABSTRACT FROM AUTHOR]

The primary aim of this research was to explore the feasibility of producing environmentally friendly composite materials by employing diverse hybrid matrices consisting of dammar natural resin, supplemented with small proportions of two synthetic resins: one epoxy and the other acrylic. A blend of paper and chicken feathers served as the reinforcing elements. The fabrication of these composite materials utilized a hand layup technique. Targeted for applications in the furniture industry or interior design, their mechanical properties were assessed through various tests. Specimens were obtained from the manufactured samples and subjected to evaluations for tensile strength, compression, flexure, vibrations, Shore hardness, and water absorption. Results indicated that irrespective of the testing method employed, the mechanical strength properties exhibited a decline with an increase in the percentage of dammar in the hybrid resins, whereas the elasticity properties demonstrated an increase with this percentage. [ABSTRACT FROM AUTHOR]

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m−2 per 24 h for OTR and 110.24 g m−2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m−2 per 24 h and 992.86 cc m−2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging. [ABSTRACT FROM AUTHOR]

At the beginning of the 20th century, the eclectic artist Mariano Fortuny y Madrazo patented two innovative methods for polychrome printing on fabrics and textiles, giving life to Fortuny fabric production in Venice. The first patent was related to colour application, while the second to a special machine that allows continuous printing using cylindrical rollers. Despite the descriptions, the methodology and materials used remain a secret. In collaboration with the Fortuny Museum in Venice, this research aimed at studying and identifying the different steps of Fortuny printing methodologies. Printing matrices, fabrics and raw materials found in the artist's studio were analysed in a multi-analytical campaign through digital microscopy, X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy in attenuated total reflectance (FTIR-ATR), μ-Raman spectroscopy and gas chromatography–mass spectrometry (GC–MS). Three main pigments were identified in paper samples: ivory black, a copper-based pigment, and a carbon black pigment with ultramarine for blues. The pigments were bound with linseed oil and colophony in varying proportions. Polychrome silk fabrics were dyed with a base colour, and then the coloured patterns were superimposed by continuous printing. Prussian blue was identified as one of the textile inks. Results provided a better understanding of printing methodology. [ABSTRACT FROM AUTHOR]

Hemp hurd fiber, a low-value waste stream from the hemp industry, has potential downstream applications as an alternative to non-renewable plastics for single-use food service ware and packaging applications. Packaging paper substrates made from chemically pulped hemp hurd, mixed in varying ratios with bleached thermomechanical radiata pine pulp were developed and tested. Handsheets were characterized using several mechanical property tests including tensile strength, tearing resistance, burst strength, short-span compression, ring crush, together with Gurley air resistance, contact angle, and Cobb60 tests. Generally, addition of hemp hurd fibers significantly improved handsheet mechanical properties. Hot-pressing of the handsheets so as to approximate molded fiber thermoforming further enhanced their performance, with pure hemp hurd handsheets having the highest mechanical properties and barrier performance. A prototype was successfully thermoformed from hemp fiber, demonstrating overall feasibility of this fibre source for molded fibre objects. [ABSTRACT FROM AUTHOR]

Flow and spontaneous imbibition phenomena in porous media are important for various industrial applications, including printing and medical lateral flow assays. Their quantitative characterization is important to better understand and select the appropriate raw materials. However, standard methods often require time-consuming tests, and/or expensive equipment. Different time scales must be considered, limiting the range of possible characterization tools. A novel experimental approach based on image analysis for characterizing spontaneous imbibition processes is presented. Hence, ultra-fast diffusion may be quantitatively characterized. Models are issued from the literature to consider physical phenomena at small (milliseconds) and medium range (seconds) of time scales. The obtained experimental data fit with theoretical results, providing valuable insights into the understanding of fluid flow behavior at different time scales. Furthermore, the identification of some physical properties for either the fluid, or the substrate, based on the theoretical models are possible, as the contact angle, which remains to be otherwise challenging. This study contributes to bridging the gap between spontaneous imbibition and capillary phenomena at different time scales, their modeling, and a characterization of material and/or fluid properties paving the way for enhanced understanding and control of fluid behavior in porous media. Different papers are considered to illustrate the method. [ABSTRACT FROM AUTHOR]

This work presents the results of a transdisciplinary analysis performed on Harward's Almanac (Dublin, 1666), an extremely rare volume currently housed in the National Library of Ireland. The uniqueness and historical value of the Almanac is related to the presence of nineteen handwritten poems, entered by an anonymous scribe. These record textually important English clandestine satire circulating anonymously in Dublin in the late seventeenth and early eighteenth century. Following a comprehensive historical assessment, it appeared evident that the current order of leaves was incorrect. To reconstruct the correct order of the leaves, and hence the likely sequence in which the manuscript poems were inscribed, this study employed a codicological/paleographic analysis complemented by analytical (X-ray fluorescence, XRF) and statistical (Self Organizing Map, SOM) investigation. Specifically, point XRF analysis was carried out for each handwritten page of the Almanac, allowing identification of ink elemental compositions (iron-based ink) and successfully supporting the validity of historical hypotheses on the poems' order of inscription. The statistical organization of XRF data by SOMs allowed easy bi-dimensional visualization of the data set (54 points) and identification of ink similarities, once more validating the historical assessment. [ABSTRACT FROM AUTHOR]

The research presented in this paper introduces a novel environmental energy‐harvesting technology that harnesses electricity from the evaporation of water using porous structural materials. Specifically, a strategy employing paper‐based hydroelectric generators (p‐HEGs) is proposed to capture the energy produced during water evaporation and convert it into usable electricity. The p‐HEGs offer several advantages, including simplicity in fabrication, low cost, and reusability. To evaluate their effectiveness, the water evaporation‐induced electrical output performance of four different p‐HEGs are compared. Among the variants tested, the p‐HEG combining wood pulp and polyester fiber exhibits the best output performance. At room temperature, this particular p‐HEG generates a short‐circuit current and open‐circuit voltage of ≈0.4 µA and 0.3 V, respectively, thereby demonstrating excellent electrical stability. Furthermore, the electrical current and voltage generated by the p‐HEG through water evaporation are able to power an LED light, both individually and in series and parallel connections. This study delves into the potential of electricity harvesting from water evaporation and establishes it as a viable method for renewable energy applications. [ABSTRACT FROM AUTHOR]

The pineapple leaves (PL) left over in the fields after pineapple harvest or burnt out, generate waste which contributes to the release of greenhouse gases. As pineapple is one of the most harvested crops in the world, the quantity of pineapple trash and its disposal methods are challenging. The composition of PL waste makes it unique to encounter the increasing demand for renewable energy and other useful products. This review is focused on the production of different biorefinery products and miscellaneous products from PL waste. The high cellulose content in PL makes it a potential feedstock for the production of different biorefinery products like bioethanol, oligosaccharides, nitrocellulose, and humic acid apart from this, waste is also useful for the production of different products like pineapple leaf fibres, fake eyelashes, organic leather, pulp and paper. Although the opportunities, future perspectives, and challenges concerning PL waste utilization to value-added goods were also addressed. It has been demonstrated that pineapple waste conversions lower waste creation, and the products produced by the conversion would promote the 'waste-to-wealth' notion. [ABSTRACT FROM AUTHOR]

Paper with simultaneous fire-resistance and hydrophobicity have greatly potential applications in the fields of packing, storage and delivering information, which attracts increasing attention recently. Different from the traditional cellulose-based paper which is extremely easily damaged by water and fire, a new type of highly flexible, fire-resistant and hydrophobic paper based on Si 3 N 4 nanowires and polydimethylsiloxane (PDMS) is reported. Specially, the Si 3 N 4 @PDMS core-shell nanowires with 3D interlocking structure are designed, in which the Si 3 N 4 nanowires act as the inorganic fire-resistant frameworks and the PDMS shell with low surface energy provides the hydrophobic surface. The Si 3 N 4 @PDMS core-shell nanowires are intertwined and interlaced to form a highly flexible Si 3 N 4 @PDMS paper. The tensile strength of Si 3 N 4 @PDMS paper is 6.19 MPa, indicating the good mechanical property. The obtained Si 3 N 4 @PDMS paper has the characteristics of writability, fire-resistance and hydrophobicity. The high thermal stability of Si 3 N 4 nanowires makes Si 3 N 4 @PDMS paper exhibit excellent fire resistance. No obvious change is observed for the commercial paper with Si 3 N 4 @PDMS paper as the fire-shielding layer after heating for 30 min. In addition, the contact angles of water droplets are all greater than 110° over the surfaces of Si 3 N 4 @PDMS paper after mechanical damages, chemical corrosions and thermal treatments. Si 3 N 4 @PDMS paper can be used in oil/water separation and oil collection. More importantly, Si 3 N 4 @PDMS paper can be used for writing without being damaged by fire or water. The present work may inspire the development and application of functional paper and is expected to become a breakthrough in the traditional paper industry. [ABSTRACT FROM AUTHOR]

The coefficient of friction for different contacting materials against skin is mainly influenced by the nature of the materials (synthetic and natural fabrics), mechanical contact parameters (interfacial pressure and sliding velocities), and physiological skin conditions (ambient humidity and skin moisture content). In the present research work, seven different types of papers used in everyday life were analyzed. The physical properties of these materials were determined through tensile tests and friction tests. By comparing mechanical properties with coefficient of friction, it was possible to conclude that the coefficient of friction is strongly correlated with the mechanical properties. [ABSTRACT FROM AUTHOR]

Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion even when it cooled down, but only if the concentration of nanofibers was high enough. This required concentration (0.6–0.9 wt%) depended on the degree of oxidation of the cellulose nanofibers. Rheological hindrance was essential to prevent the buoyancy of beeswax particles, while the presence of glycerol prevented excessive aggregation. The mixtures had yield stress and showed pseudoplastic behavior at a high enough shear rate, with their apparent viscosity being positively influenced by the surface charge density of the nanofibers. When applied to packaging paper, the nanocellulose-stabilized beeswax suspensions not only enhanced its barrier properties towards liquid water (reaching a contact angle of 96°) and water vapor (<100 g m−2 d−1), but also to grease (Kit rating: 5) and airflow (>1400 Gurley s). While falling short of polyethylene-coated paper, this overall improvement, attained using only one layer of a biobased coating suspension, should be understood as a step towards replacing synthetic waxes and plastic laminates. [ABSTRACT FROM AUTHOR]

Wood-based paper fibers are inherently biodegradable. In contact with moist soil and in compost, papermaking fibers are readily broken down by soil microbes. Resistance to biodegradation is needed, as paper is used for special applications such as mulching in agriculture and forestry, the coating of construction materials, and for packing and wrapping under conditions where packaging materials may be exposed to contact with moist soil or other type microbial active contamination. A preceding study showed that paper chemical crosslinking with glyoxal, citric acid (CA), or methylated 1,3-dimethylol-4,5-dihydroxyethylene urea (mDMDHEU) results in substantially improved paper wet strength and lower paper water absorbency. The present study examined the efficiency of chemical crosslinking treatments with CA and with mDMDHEU to decrease the biodegradation rate of laboratory paper sheets and a sack paper, both made of kraft fibers. The biodegradation was examined using a 48-h enzymatic degradation test and a 2-month soil burial test. The results indicate that chemical crosslinking is an effective non-biocidal method for making sulphate kraft paper more resistant to biodegradation. In some end-uses, improved resistance to biodegradation, along with improved paper wet performance, can enhance paper performance comparable to plastic films. [ABSTRACT FROM AUTHOR]

Paper, which is in fact a very complex cellulose-based product derived from different lignocellulosic resources, is usually regarded as a simple omnipresent commodity in our lives. Wood fibers derived from trees are the most employed sources for papermaking purposes. From an environmental protection perspective, and for their essential role in our life (they give us the life itself through their foliar system supporting the photosynthesis process), trees should not be extensively cut down and they should be used less and less for papermaking. Thus, employment of non-woody alternative sources for papermaking could be exploited more as an attractive and feasible option. [ABSTRACT FROM AUTHOR]

In this article we study the particularities of editorial practice in contexts of confinement in Argentina through the systematization and analysis of five publications, already published or in the process of being published, which were formulated within the framework of pedagogical-political practices carried on by the Prisons Extension Program of the Philosophy and Literature Faculty of the University of Buenos Aires. These five cases will be addressed in order to observe what meanings guide the editorial processes through the marks imprinted on them by the specificity of the writing that summons them and the territory to which they belong. Publishing in the context of a pedagogical project developed by the university configures collective territories where writing and publications can display and carry plural voices, which are strengthened in that plurality forged in the heat of individual and collective subjectivation processes made possible by education and writing. Editorial practice is inseparably intertwined with actions aimed at defending rights, narrating lived experiences and building a collective history which are part of the desires and expectations regarding publication. [ABSTRACT FROM AUTHOR]

The dominance of plastics in the packaging market is due to their low weight and thickness, which save transportation costs. However, their non-biodegradability poses a significant threat to the environment. Paper, on the other hand, is considered as a safer alternative due to its natural composition and biodegradability. The porous structure of paper limits its application in packaging, and its poor water resistance further restricts its use in humid environments. Therefore, lamination is a method useful tool to improve the barrier properties of paper. Additionally, the researchers are focusing on developing biodegradable and water-based coatings with anti-fat properties as a green alternative to plastic packaging. The impact of a new grease-resistant coating composed of starch, gelatin and sodium alginate on the mechanical properties of paper was investigated through tensile, tearing, and bursting strength tests. The results showed significant improvements in the mechanical properties of the coated paper sheets. Furthermore, the biodegradability test indicated that the paper samples coated with the new composition showed a 50% weight loss after one week of incubation in the soil, and after three weeks, they exhibited 100% weight loss, demonstrating their outstanding biodegradability. [ABSTRACT FROM AUTHOR]

This essay explores the material imperatives of nineteenth-century statistical ambition, at a time when the nature of paper itself underwent rapid change. It expands the concept of paper technologies to include knowledge about the materials themselves, as well as the infrastructures, techniques, and agreements that made it possible for the right kind of paper to be made available for particular purposes. Taking the production of the forms for the Prussian census as a case in point, it argues that the enumeration effort of Prussian census statisticians went far beyond designing a form, collecting information, noting and compiling figures, or creating tables. Paper knowledge to define and control the material substance of the forms mattered as much as political impetus and statistical methods in getting the census right. [ABSTRACT FROM AUTHOR]

This article presents results on the use of a new material as a solidifying agent and/or color-fixing agent. A special polysaccharide material extracted from the prickly pear cactus (Opuntia ficus indica) was tested on historical materials and modern papers. An old book from the 18th century was chosen as historical material. From the mentioned book 42 pages were taken, on which a conservation and restoration pretreatment was performed before applying the polysaccharide material: sampling, fiber analysis, dry cleaning, ink solubility, pH test, thickness measurement and wet cleaning. The paper sheets provided for the test were divided into 4 groups, 3 of which were treated with gel and one left untreated as a reference. The division into groups is not only due to the different method of application, but also due to the process of gel extraction. The effect of the treatment was analyzed using FTIR-ATR. To test the mucilage as color-fixing agent 2 samples were prepared using watercolor papers colored with 6 different watercolors applied to 2.5 cm2 samples for each color in two rows of different intensity. One of the 2 samples was treated with gel, but both were immersed for 3 times in a water-ethanol solution for approximately 20 min as is standard practice in conservation and restoration. After washing, both specimens were subjected to colorimetric analysis to assess their differences. The results provided satisfactory evidence for the protection of paints sensitive to aqueous treatments and suggest the use of mucilage as a new material in cleaning method for water-soluble media. [ABSTRACT FROM AUTHOR]

Plant-fibre ancient-books with cultural significance should be protected from moisture and pollution. In this work, a strategy of surface in-situ protection (building composite coating) was adopted to achieve good hydrophobicity, moisture-proofness and ink-contamination resistance at the surface of archaistic paper. By pre-ring opening of epoxy-based poly(vinyl silsesquioxane) (POSS) and spray of POSS/polyvinylidene fluoride (PVDF) mixed solution, in-situ construction of POSS/PVDF composite coating at the surface of ancient paper was achieved. Compared to water-absorbing ancient paper, POSS/PVDF co-modified ancient paper shows strong humidity resistance. The surface of co-modified ancient paper (epoxy-group pre-ring opening for 45 min) displays high hydrophobicity (water contact angle of ~142.6°), ascribed to greatly improved surface roughness of paper fibres as well as complete coverage of high-content Si/F elements on fibre surface. POSS-modified and neat ancient-paper materials show surface water contact angles of ~113.9° and 0°, respectively. Robust ink-resistance of POSS/PVDF co-modified ancient-paper surface is realized. The innovation in this work lies in perfect synergy of cage-shaped POSS and threadlike PVDF in coating. This work might open a way for surface nondestructive-protection to ancient-books for damp-proof, hydrophobic and anti-fouling characteristics. [ABSTRACT FROM AUTHOR]

The present study reports on the development by thermoforming of highly sustainable trays based on a bilayer structure composed of paper substrate and a film made of a blend of partially bio-based poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA). The incorporation of the renewable succinic acid derived biopolyester blend film slightly improved the thermal resistance and tensile strength of paper, whereas its flexural ductility and puncture resistance were notably enhanced. Furthermore, in terms of barrier properties, the incorporation of this biopolymer blend film reduced the water and aroma vapor permeances of paper by two orders of magnitude, while it endowed the paper structure with intermediate oxygen barrier properties. The resultant thermoformed bilayer trays were, thereafter, originally applied to preserve non-thermally treated Italian artisanal fresh pasta, "fusilli calabresi" type, which was stored under refrigeration conditions for 3 weeks. Shelf-life evaluation showed that the application of the PBS–PBSA film on the paper substrate delayed color changes and mold growth for 1 week, as well as reduced drying of fresh pasta, resulting in acceptable physicochemical quality parameters within 9 days of storage. Lastly, overall migration studies performed with two food simulants demonstrated that the newly developed paper/PBS–PBSA trays are safe since these successfully comply with current legislation on plastic materials and articles intended to come into contact with food. [ABSTRACT FROM AUTHOR]

The identification of sustainable materials as an alternative to plastic is fundamental for the protection of the environment and for the safeguard of marine ecosystems. The replacement of plastic with organic materials for fish storage might affect its shelf-life due to the high concentration of oxidizable fatty acids in fish flesh. This study investigated the effectiveness of two organic packaging materials, namely coconut fiber (Coc) and paper (Pap), as alternatives to the conventionally used polystyrene (Pol), on the shelf-life, hygienic parameters, and quality traits of anchovies refrigerated for one (T0), three (T1), or seven (T2) days. The hygienic quality of anchovies packaged in the organic Pap and Coc boxes was better than the traditional Pol, probably due to the higher porosity of the packaging, which allows a higher bacterial proliferation. Results of the T-BARS test showed a lower (p < 0.05) malondialdehyde concentration in fillets from the Pap group, which increased (p < 0.05) from the first to the seventh day of storage. The polyunsaturated fatty acids concentration did not differ between groups, but it decreased (p < 0.05) from T0 to T2. Coconut fiber and paper are worthy of further investigation since these packaging materials did not affect the shelf-life and fatty acid profile of anchovies during storage. [ABSTRACT FROM AUTHOR]

Background: There are a variety of costs associated with publication of scientific findings. The purpose of this work was to estimate the cost of peer review in scientific publishing per reviewer, per year and for the entire scientific community. Methods: Internet-based self-report, cross-sectional survey, live between June 28, 2021 and August 2, 2021 was used. Participants were recruited via snowball sampling. No restrictions were placed on geographic location or field of study. Respondents who were asked to act as a peer-reviewer for at least one manuscript submitted to a scientific journal in 2020 were eligible. The primary outcome measure was the cost of peer review per person, per year (calculated as wage-cost x number of initial reviews and number of re-reviews per year). The secondary outcome was the cost of peer review globally (calculated as the number of peer-reviewed papers in Scopus x median wage-cost of initial review and re-review). Results: A total of 354 participants completed at least one question of the survey, and information necessary to calculate the cost of peer-review was available for 308 participants from 33 countries (44% from Canada). The cost of peer review was estimated at $US1,272 per person, per year ($US1,015 for initial review and $US256 for re-review), or US$1.1–1.7 billion for the scientific community per year. The global cost of peer-review was estimated at US$6 billion in 2020 when relying on the Dimensions database and taking into account reviewed-but-rejected manuscripts. Conclusions: Peer review represents an important financial piece of scientific publishing. Our results may not represent all countries or fields of study, but are consistent with previous estimates and provide additional context from peer reviewers themselves. Researchers and scientists have long provided peer review as a contribution to the scientific community. Recognizing the importance of peer-review, institutions should acknowledge these costs in job descriptions, performance measurement, promotion packages, and funding applications. Journals should develop methods to compensate reviewers for their time and improve transparency while maintaining the integrity of the peer-review process. [ABSTRACT FROM AUTHOR]

An awareness of the problems associated with the use of plastics can provide new opportunities for the paper industry. We have to try to enhance the public awareness of the environmental value of papers by using diverse advertising approaches. We have to collaborate to make paper more viable to replace plastics in many uses. The collaboration not only between industry and academia but also between countries and associations is essential to advance the age of paper. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop bio-based adhesives that can be used for various packaging papers. In addition to commercial paper samples, papers produced from harmful plant species in Europe, such as Japanese Knotweed and Canadian Goldenrod, were used. In this research, methods were developed to produce bio-based adhesive solutions in combinations of tannic acid, chitosan, and shellac. The results showed that the viscosity and adhesive strength of the adhesives were best in solutions with added tannic acid and shellac. The tensile strength with adhesives of tannic acid and chitosan was 30% better than with commercial adhesives and 23% for combinations of shellac and chitosan. For paper from Japanese Knotweed and Canadian Goldenrod, the most durable adhesive was pure shellac. Because the surface morphology of the invasive plant papers was more open and had numerous pores compared to the commercial papers, the adhesives penetrated the paper structure and filled the voids. There was less adhesive on the surface and the commercial papers achieved better adhesive properties. As expected, the bio-based adhesives also showed an increase in peel strength and exhibited favorable thermal stability. In summary, these physical properties support the use of bio-based adhesives use in different packaging applications. [ABSTRACT FROM AUTHOR]

Paper is widely used as a packaging material because it is biodegradable and completely safe for the environment. The use of antimicrobials as a coating on paper can improve its mechanical, optical, physical and antimicrobial properties. Antimicrobial packaging suppresses the development of pathogenic microorganisms in order to ensure the safety of the product, extend the shelf life and protect the quality of the product. Giving antibacterial properties to papers and cardboards expands their use in different areas and for different purposes. Antibacterial paper prevents the entry and development of harmful microorganisms such as bacteria, fungi, mould. Antimicrobials that occur naturally in nature have a number of advantages, as they are considered to pose less risk to the consumer. One of the modern directions in research is the inclusion of different types of active substances in the packaging material, which can give it additional functions, such as elimination of oxygen, moisture, ethylene, ethanol emission, antimicrobial activity and others. The present work aims to obtain plant extracts, their characterization and their surface application on paper. Extracts of Bulgarian herbs St. John's wort, cumin, rosemary, thyme and basil were obtained and characterized and studied. Plant extracts are applied by spraying on the surface of various papers. The antimicrobial effect of treated papers on gram-positive and gram-negative bacteria was studied. The results of the analysis of the obtained papers show the possibility of using plant extracts containing biologically active ingredients for the production of papers with barrier properties. The use of plant extracts is a promising and innovative solution. [ABSTRACT FROM AUTHOR]

TiO2 nanoparticles can improve the electrical performance of oil paper insulation. In this study, 10 nm TiO2 nanoparticles were prepared and dispersed into transformer oil, and then immerse pressboards in it to obtain nanofluid impregnated pressboards (NP). Its thermal aging was accelerated together with the reference sample at 130°C for 36 days. Analyzing the acid value in the oil, polymerization degree, surface topography, AC breakdown strength, surface flashover characteristics and surface potential decay characteristics. It was observed that TiO2 nanoparticles can reduce the acid value and improve AC breakdown strength of oil. However, the degree of polymerization and surface appearance of NP and oil impregnated pressboards (OP) during thermal aging did not differ significantly. During the aging process, the energy level of pressboard surface traps shifted first towards the shallow and then gradually towards the deep. During all the aging stages, the surface flashover voltage of NP was always higher or close to that of OP. The mechanism of TiO2 nanoparticles improving the breakdown and surface flashover characteristics of oil–paper insulation during thermal aging is discussed from the perspective of water molecules and aging by‐products adsorption and introduction of shallow traps by nanoparticles. [ABSTRACT FROM AUTHOR]

(1) Background: Many drugs possess poor bioavailability, and many strategies are available to overcome this issue. In this study, smartFilm technology, i.e., a porous cellulose matrix (paper), in which the active compound can be loaded onto in an amorphous state was utilised for oral administration to improve the solubility and bioactivity of a poorly soluble BSC class IV antibiotic. (2) Methods: Norfloxacin was used as the model drug and loaded into commercially available paper. The resulting norfloxacin-loaded smartFilms were transformed into smartFilm granules via wet granulation and the resulting norfloxacin-loaded smartFilm granules were transformed into norfloxacin-loaded tablets made from paper, i.e., smartFilm tablets. The crystalline state of norfloxacin was investigated, as well as the pharmaceutical properties of the granules and the tablets. The bioactivity of the smartFilm tablets was assessed in vitro and ex vivo to determine the antibacterial activity of norfloxacin. The results were compared to a physical mixture tablet that contained non-loaded paper granules and equal amounts of norfloxacin as a crystalline powder. (3) Results: Norfloxacin-loaded smartFilm granules and norfloxacin-loaded smartFilm tablets contained norfloxacin in an amorphous state, which resulted in an improved and faster release of norfloxacin when compared to the physical mixture tablet. The bioactivity was up to three times higher when compared to the physical mixture tablet. The ex vivo model was demonstrated to be a useful tool that allows for a fast and cost-effective discrimination between "good" and "bad" formulations. It provides realistic physiological conditions and can therefore yield meaningful, additional biopharmaceutical information that cannot be assessed in classical in vitro experiments. (4) Conclusions: smartFilm tablets are a promising, universal, industrially feasible and cost-effective formulation strategy for improved solubility and enhanced bioactivity of poorly soluble drugs. [ABSTRACT FROM AUTHOR]

The manufacturing of paper with new functional properties is a current problem today. A method of modifying the surface layer of paper by the partial dissolution of cellulose on its surface is proposed. N-Methylmorpholine-N-oxide (NMMO) is proposed for use as a solvent, the regeneration of which provides an environmentally friendly process. It was shown that among the possible hydrate forms of the solvent, the monohydrate and higher-melting forms are optimal for modifying the paper surface. The temperature–time modes of processing were revealed and the weight gain and density increase in the course of modification were estimated. The structural and morphological features of the original and modified paper were studied by X-ray imaging and scanning microscopy. The NMMO surface treatment makes it possible to vary the air permeability of the paper, making it practically non-permeable. The capillary and pore system were radically transformed after the partial dissolution of cellulose and its coagulation, as the formed cellulose film isolates them, which leads to a decrease in surface absorbency. The processing conditions allowing for the optimization of the optical and strength properties of the modified paper samples are revealed. The resulting paper with a modified N-methylmorpholine-N-oxide surface layer can be used for printing valuable documents. [ABSTRACT FROM AUTHOR]

During the storage of celluloid pictures for animation films over half a century, an interleave paper adhered to acrylic paint. The purpose of this study is to establish a methodology to cleanly remove the paper from the paint. A layered film, a replica of the celluloid pictures, adhered with paper was prepared and immersed in water or ethanol. The effect of these solvents on the peeling behavior was investigated using a peel test. The maximum peel force for the dry layered film in was distributed at ~0.5 N, independently of the peel speed. The peel force was significantly reduced after the layered film was immersed in pure water or ethanol. A morphological observation revealed that the dry paper was peeled off via the cohesive failure of the paper. After the layered film was immersed in pure water, the paper was also peeled off via cohesive failure. The layered film immersed in ethanol was peeled off at the paper/paint interface. To clear the effect of the volume change in the paint on peel behavior, the relative volume was determined via image analysis. The relative volume of paint was 1.56 in pure water and 1.37 in ethanol. It can be considered that the large difference in the volume of paint induces a large shear stress at the paint/paper interface. [ABSTRACT FROM AUTHOR]

The development of self-powered UV photodiode on green substrate is still a challenge. In this study, highly conductive Al doped ZnO (AZO) film was sputter-deposited on paper substrate at room temperature; subsequently, paper-based Schottky photodiodes were successfully fabricated by following Au-ZnO-Al and Au-ZnO-AZO-Al structure designs, respectively. These UV light-based devices operate successfully without external power. Au-ZnO-AZO-Al photodiode shows improved response and faster speed compared to Au-ZnO-Al photodiode. The one-dimensional Poisson simulation results demonstrate that the improvement is attributed to the strong electric field in the ZnO-AZO n-n+ high-low junction, thus, enhancing the collection rate and drifting speed of the photogenerated carriers. In addition, AZO can form favorable ohmic contact with the Al electrodes, further improving the device performance. The photo-response of the paper-based photodiode device shows high reproducibility and stability. Based on these outstanding results, we conclude that these paper-based electronic devices have great potential to replace conventional petroleum-based flexible electronic devices, thus, contributing to the green/sustainable development. [ABSTRACT FROM AUTHOR]

Pineapple leaf fibers (PALF) were biopulped using Trametes versicolor, and the resulting biopulp was bleached with xylanase-enzymatic treatments. The biopulping was extensively described using determinations of fiber morphology, color, chemical composition, extractive content, and thermal stability using the structural characteristics determined by XRD and paper properties. The results showed that the chemical and enzymatic treatments shortened the fiber, almost to 50%, and the Kappa index decreased from 27 to 13. Cellulose and holocellulose contents increased from 65% to 74% and from 86% to 91%, respectively, but extractives, lignin (from 12% to 4%), pentosans (from 25% to 14%) and the crystallinity decreased from 58% to 67% in both chemical bleaching and further xylanase-enzymatic processing. Xylanase)enzymatic processing allowed us to obtain whiter (increased lightness color and decreased redness and yellowness tonality) and heavier paper, even though it presented decreased mechanical properties (decreased stress resistance, rupture length, tear resistance and index longitudinal tearing). The xylanase-enzymatic treatment with the best pulping and paper proper)ties is when the biopulp is treated with a xylanase enzyme concentration of 0.04% (w/w). [ABSTRACT FROM AUTHOR]

Banana stem is a known alternative to wood for the production of pulp and paper. During the production of paper, it is extremely important to save costs and time while at the same time enhancing quality of produced paper. In the present study, paper was developed from banana stem fiber by optimizing its density. Response surface methodology (RSM) using Box-Behnken design (BBD) was used to determine optimum blending parameters of the developed papers. The influence of banana stem fiber amount (250-1000 g), water amount (1-2liters) and blending time (5-10 min) on paper density was ana)lyzed using software Stat-Ease 360, Version 13. The optimum conditions of banana stem fiber amount, water amount and blending time to achieve a density of 675.75 g/m3 were determined as 461.83 g, 1.31liters, and 8.53 min, respectively. ANOVA results revealed that the quadratic model best fits the density response, with blending time and banana stem fiber amount as the most significant model terms. Linear effects were more predominant than quadratic and interaction effects. The developed density model was in close agreement with experimental findings with an R² value of 0.9748. Developed paper had cellulosic contents, with volatiles as high as 82.11%wb and 2.11% wb ash composition. Future works on thermal properties of paper are encouraged. [ABSTRACT FROM AUTHOR]

This article traces the history of the relationship of papermaking and paper to libraries over time. Paper was first made in China and is traditionally considered one of that nation's four greatest inventions, along with gun powder, printing, and the compass. Papermaking was often associated with archives in its early development in China, as well as when it was introduced to Japan, where it came to be a part of some Shinto and Buddhist temples, and later governmental agencies. Under Islam, the availability of paper was linked to increased literacy and growth of libraries. In early modern Europe, before the widespread use of wood in the papermaking process, libraries and archives were part of an "economy of paper" with paper at times being in short supply. In the modern era, the world of papermaking did not intersect much with the world of the library, which made progress with the problem of brittle books, one of its greatest challenges, slow, though recent efforts of government, industry, scientists, and representatives of the library have produced positive results. The damage caused by wood-based paper in libraries was mirrored by the environmental damage caused by wood-based papermaking in communities. The history of papermaking and libraries demonstrates the importance of understanding the technologies which support the library, while also advocating effectively to the representatives of all its sources of support in ways which promote the values of the library and its associated community. [ABSTRACT FROM AUTHOR]

The production of release coatings has been increasing in recent years because of their use in various fields. However, commercially available release coatings are regarded as non-recyclable. As a consequence, the repulping of these residues is difficult, and their presence in the recycling stream represents an important source of contamination. One solution to this problem is to use new coating materials that can replace the siliconized backing, provided that these new materials are recyclable. As a solution to this problem, the authors propose the use of alkylated phosphorylated fibers to produce an environmentally friendly and inexpensive release paper. The results show that a surface application of hydrophobic phosphorylated fibers reduces the surface free energy of the paper support, as well as the peel strength, which facilitates the separation of the adhesive tape. [ABSTRACT FROM AUTHOR]

Chemical crosslinking is an established method for improving the wet performance of paper. In the chemical crosslinking process, covalent bonds are formed between cellulosic surfaces. The formed intra- and interfiber bonds increase the paper's wet strength and reduce its water absorptivity. The majority of published studies concern crosslinking treatments with glyoxal, citric acid (CA), or with 1,2,3,4-butanetetracarboxylic acid (BTCA). The most severe disadvantage of the crosslinking treatments with glyoxal, CA, and BTCA is that the formed crosslinks make the fibers and the paper more brittle. This downside effect has largely impeded the utilization of crosslinking in paper and paperboard making. In the present study, handsheets made from Nordic bleached softwood kraft pulp (NBSK) were crosslinked with methylated 1,3-dimethylol-4,5-dihydroxyethylene urea (mDMDHEU), which is commonly used in cotton fabric finishing. Similar to using glyoxal and citric acid, crosslinking with mDMDHEU notably increased the handsheet wet strength and decreased the water absorption. Compared to the use of glyoxal or CA, the crosslinking with mDMDHEU did not make the handsheets that brittle. These results suggest that mDMDHEU could be a more viable crosslinking agent for improving the wet performance of paper products. [ABSTRACT FROM AUTHOR]

This paper presents the limitations and potential of ATR-FTIR spectroscopy applied to the study of cellulosic textile collections The technique helps to differentiate natural fibres according to the content of lignin, pectin, hemicellulose, and wax, although some problematic issues should be considered. The spectral differences derived from the environmental humidity uptake and the plant composition are reviewed and discussed in the light of new experimental data. Diagnostic bands are proposed that can discriminate between different fibres from different plants. The contribution of ageing is also considered, demonstrating that sometimes aged fibres cannot be reliably recognised. In contrast, the potential of ATR-FTIR spectroscopy to discriminate between natural and modified fibres is discussed and proven. The best results were obtained when microinvasive ATR-FTIR spectroscopy was coupled with SEM observations. The proposed protocol was tested on microsamples of various cellulosic materials from traditional Japanese samurai armours dating from the 16th to the 20th centuries (Morigi Collection, Museo delle Culture, Lugano, Switzerland). The results facilitated a complete characterisation of the materials and demonstrated that the protocol can be used to study a wide variety of cellulosic materials, including both natural and man-modified fibres, and paper. [ABSTRACT FROM AUTHOR]

All-lignin coating formulations were prepared while combining water-soluble cationic kraft lignin (quaternized LignoBoost®, CL) and anionic lignosulphonate (LS). The electrostatic attraction between positively charged CL and negatively charged LS led to the formation of insoluble self-organized macromolecule aggregates that align to films. The structures of the formed layers were evaluated by atomic force microscopy (AFM), firstly on glass lamina using dip-coating deposition and then on handsheets and industrial uncoated paper using roll-to-roll coating in a layer-by-layer mode. Coated samples were also characterized by optical microscopy, scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (SEM/EDS), and contact angle measurements. It was suggested that the structure of all-lignin aggregates is the result of the interaction of amphiphilic water-soluble lignin molecules leading to their specifically ordered mutual arrangement depending on the order and the mode of their application on the surface. The all-lignin coating of cellulosic fiber imparts lower air permeability and lower free surface energy to paper, mainly due to a decrease in surface polarity, thus promoting the paper's hydrophobic properties. Moderate loading of lignin coating formulations (5–6 g m−2) did not affect the mechanical strength of the paper. [ABSTRACT FROM AUTHOR]

• Hydroxyapatite (HAP) composite paper with biocompatibility and hygroscopicity was prepared. • HAP composite paper has better hygroscopic and triboelectric properties than pure paper, making it more suitable for wearable sensing applications. • The HAP composite paper-based triboelectric nanogenerator can detect and distinguish different joint movements. • Hemostatic and disposable HAP composite paper can be degraded in the natural environment without harm. Wearable triboelectric nanogenerators (TENGs) have attracted considerable attention in the field of self-powered sensors that can be worn on the skin directly without packaging because of their breathability, conformability, and sensitivity to collect biomechanical energy. However, high humidity on the skin can affect the wearable TENG output performance, substantially affecting the sensor performance and stability. When worn for a long time, humidity can even cause skin inflammation. Thus, for a wearable TENG, moisture control and biocompatibility are also key factors that need to be addressed. Herein, we report a hygroscopic and biocompatible paper-based TENG using a hydroxyapatite (HAP) mineral coating to enhance the paper fiber. The mineral coating can maintain the surface of the paper fiber, which will not cause large external deformation of the paper fiber under a force, avoid squeezing out excess water, and keep the friction surface dry, avoiding humidity affecting the output performance. Without interfering with the performance of the TENG, the maximum water absorption of the HAP composite paper is ∼8 μL. The HAP composite paper–based TENG (4 cm2) has an open-circuit voltage and short-circuit current 5.8 times and 4.2 times that of pure paper, respectively, and can obtain 80.4 mW/m2 output and directly light 117 LEDs. At relative humidity values of 25.7 %, 43.1 %, and 58.8 %, the performance retained the peak values of 80.2 %, 68 %, and 63.7 %, respectively. Even at a high relative humidity of 71.7 %, the triboelectric performance of HAP composite paper is retained 59.3 %, and the stability under humidity is better than that of pure paper (45.6 %). In addition, the mineral paper can even work with tissue fluid and output performance decreases by 43.8 %. The mineral-enhanced paper TENG with high power generation performance, hygroscopicity, biocompatibility, and degradability provides a new perspective for disposable wearable sensors, even in medical treatment. [ABSTRACT FROM AUTHOR]

Herein is presented a novel and efficient portable paper-based sensing platform using paper-incorporated histidine stabilized gold nanoclusters (His-AuNCs), for the sensitive and selective detection of Fe ions from low-volume real water samples based on photoluminescence (PL) quenching. Highly photoluminescent colloidal His-AuNCs are obtained via a novel microwave-assisted method. The His-AuNCs-based sensor reveals a limit of detection (LOD) as low as 0.2 μM and a good selectivity towards Fe ions, in solution. Further, the fabricated portable sensing device based on paper impregnated with His-AuNCs proves to be suitable for the easy detection of hazardous Fe levels from real water samples, under UV light exposure, through evaluating the level of PL quenching on paper. Photographic images are thereafter captured with a smartphone camera and the average blue intensity ratio (I/I0) of the His-AuNCs-paper spots is plotted against [Fe2+] revealing a LOD of 3.2 μM. Moreover, selectivity and competitivity assays performed on paper-based sensor prove that the proposed platform presents high selectivity and accuracy for the detection of Fe ions from water samples. To validate the platform, sensing assays are performed on real water samples from local sources, spiked with 35 μM Fe ions (i.e., Fe2+). The obtained recoveries prove the high sensitivity and accuracy of the proposed His-AuNCs-paper-based sensor pointing towards its applicability as an easy-to-use, fast, quantitative and qualitative sensor suitable for on-site detection of toxic levels of Fe ions in low-volume real water samples. [ABSTRACT FROM AUTHOR]

Many orally administrated drugs exhibit poor bioavailability due to their limited solubility. The smartFilm technology is an innovative approach to improve the drug aqueous solubility, where the drug is embedded within the matrix of cellulose-based paper in an amorphous state, hence increasing its solubility. Despite its proven effectiveness, smartFilms, i.e., pieces of paper, exhibit limited flowability and are not easy to swallow, and thus oral administration is not convenient. In addition, there is a lack of knowledge of their mechanical behavior under compression. This study aimed to transform unloaded smartFilms, i.e., paper, into a flowable physical form and investigated its mechanical behavior when compressed. Granules made of paper were prepared via wet granulation and were compressed into tablets. The influence of using different amounts and forms of sucrose, as a binder, on the pharmaceutical properties of the produced granules and tablets was studied and the most suitable composition was identified by using instrumented die experiments. For this, the Poisson's ratio and Young's modulus were determined for different compaction force levels and the deformation behavior was estimated with the Heckel mathematical model. All granule batches showed good flowability with angle of repose values between 25–35°. Granule batches with ≤30% dry sucrose content produced tablets that fulfilled the European Pharmacopeia requirements, and the compaction behavior of the granules was found to be comparable to the behavior of classical binders and compression enhancers. Paper can be transferred into granules. These granules can be used as suitable intermediate products for the production of tablets made of paper in large, industrial scale. [ABSTRACT FROM AUTHOR]

Rapid, simple, and sensitive analysis of relevant proteins is crucial in many research areas, such as clinical diagnosis and biomarker detection. In particular, clinical data on cancer biomarkers show great promise in forming reliable predictions for early cancer diagnostics, although the current analytical systems are difficult to implement in regions of limited recourses. Paper-based biosensors, in particular, have recently received great interest because they meet the criteria for point-of-care (PoC) devices; the main drawbacks with these devices are the low sensitivity and efficiency in performing quantitative measurements. In this work, we design a low-cost paper-based nanosensor through plasmonic calligraphy by directly drawing individual plasmonic lines on filter paper using a ballpoint pen filled with gold nanorods (AuNR) as the colloidal ink. The plasmonic arrays were further successively coated with negatively and positively charged polyelectrolyte layers employed as dielectric spacers to promote the enhancement of the emission of carboxyl-functionalized quantum dots (QD)—previously conjugated with specific antibodies—for indirect detection of the carcinoembryonic antigen-related cell adhesion molecule 5 (CEACAM5). The efficiency, sensitivity, as well as the specificity of our portable nanosensor were validated by recording the luminescence of the QD@Ab complex when different concentrations of CEACAM5 were added dropwise onto the calligraphed plasmonic arrays. [ABSTRACT FROM AUTHOR]

Most power transformers are oil-immersed transformers for which its insulation system consists of oil and cellulosic solid. The insulation liquid impregnates the solid-covering air spaces, which improves the efficiency of the insulation system. Not only does the oil ensure electrical insulation but it also works as coolants transferring the heat generated during transformer operation to the exterior of the transformer. Throughout normal operation conditions, transformers experience multiple stresses that degrade their insulation. Since the lifetime of oil-immersed transformers is defined mainly by the state of the insulation paper, it is critical to understand the behavior and degradation mechanisms of new insulation systems that try to overcome the drawbacks of mineral oil as well as to improve power transformer performances. The current increased prevalence of the nonlinear loads additionally stresses power transformers, which generates their premature ageing or even failure. Consequently, new materials and assessment methods are required to guarantee the suitable management of power transformer populations. In this Special Issue "Experimental and Numerical Analysis of Thermal Ageing in Power Transformers", four papers have been published. The guest editor also describes briefly some challenges involved beyond the coverage of this Special Issue. [ABSTRACT FROM AUTHOR]

Paper aging and protection processes play an essential function in the preservation of library collections and archives. In this study, some physical-mechanical properties of paper samples from XXth century books (private collections), such as pH acidity, tensile strength, and modulus of elasticity, as well as optical properties, such as absolute change in yellowness, were examined before and after treating them with hydroxyapatite nanoparticles (HAp). Accelerated light aging was also evaluated and discussed. The treatment with HAp nanoparticles increased the paper's pH to slightly alkaline values (approximately pH 8). Washing and treating the paper improved its mechanical properties compared to untreated paper; the tear length increased by 35% and the modulus of elasticity increased by 56%. That the treated and aged samples are more elastic than the original samples demonstrates that HAp nanoparticles consolidated the cellulose fibers. Additionally, particle morphology, size, composition and size distribution were assessed via image analysis using scanning electron microscopy (SEM-EDX), atomic force microscopy (AFM), and the ImageJ processing program. [ABSTRACT FROM AUTHOR]

(1) Background: Numerous oral drugs exhibit limited bioavailability due to their poor solubility and poor intestinal permeability. The smartFilm technology is an innovative approach that improves the drug aqueous solubility via incorporating the drug in an amorphous state into a cellulose-based matrix, i.e., paper. smartFilms can be transformed into a free-flowing physical form (i.e., paper granules) that can be compressed into tablets with optimum physico-chemical and pharmaceutical properties. The aim of this study was to investigate if smartFilm tablets are suitable for improved oral delivery of poorly water-soluble drugs. (2) Methods: Curcumin is a poorly soluble drug with low intestinal permeability and was used for the production of curcumin-loaded smartFilms. The curcumin-loaded smartFilms were transferred into smartFilm granules which were then compressed into curcumin-loaded smartFilm tablets. The tablets were characterized regarding their physico-chemical and pharmaceutical properties, and the intestinal permeability of curcumin was determined with the ex vivo porcine intestinal model. The ex vivo intestinal permeability of curcumin from the smartFilm tablets was compared to a physical mixture of curcumin and paper and to a classical and to an innovative commercial product, respectively. (3) Results: The produced curcumin-loaded smartFilm tablets fulfilled the European Pharmacopoeia requirements, incorporated curcumin in amorphous state within the cellulose matrix and exhibited an enhanced dissolution rate. The ex vivo intestinal permeation data were shown to correlate to the in vitro dissolution data. The ex vivo intestinal permeation of curcumin from the smartFilm tablets was about two-fold higher when compared to the physical mixture and the classical commercial product. No differences in the ex vivo bioavailability were found between the smartFilm tablets and the innovative commercial product. (4) Conclusions: smartFilm tablets are a cost-effective and industrially feasible formulation approach for the formulation of poorly water-soluble drugs, i.e., BCS class II and IV drugs. [ABSTRACT FROM AUTHOR]

The hydroxyl groups on the cellulose macromolecular chain cause the cellulose surface to have strong reactivity. In this study, 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane (PDOTES) was used to modify cellulose to improve its triboelectric properties, and a triboelectric nanogenerator (TENG) was assembled. The introduction of fluorine groups reduced the surface potential of cellulose and turned it into a negative phase, which enhanced the ability to capture electrons. The electrical properties increased by 30% compared with unmodified cellulose. According to the principles of TENGs, a self-powered human-wearable device was designed using PDOTES-paper, which could detect movements of the human body, such as walking and running, and facilitated a practical method for the preparation of efficient wearable sensors. [ABSTRACT FROM AUTHOR]

Hydrogen sulfide (H2S) is known to participate in bacteria-induced inflammatory response in periodontal diseases. Therefore, it is necessary to quantify H2S produced by oral bacteria for diagnosis and treatment of oral diseases including halitosis and periodontal disease. In this study, we introduce a paper-based colorimetric assay for detecting bacterial H2S utilizing silver/Nafion/polyvinylpyrrolidone membrane and a 96-well microplate. This H2S-sensing paper showed a good sensitivity (8.27 blue channel intensity/μM H2S, R2 = 0.9996), which was higher than that of lead acetate paper (6.05 blue channel intensity/μM H2S, R2 = 0.9959). We analyzed the difference in H2S concentration released from four kinds of oral bacteria (Eikenella corrodens, Streptococcus sobrinus, Streptococcus mutans, and Lactobacillus casei). Finally, the H2S level in Eikenella corrodens while varying the concentration of cysteine and treatment time was quantified. This paper-based colorimetric assay can be utilized as a simple and effective tool for in vitro screening of H2S-producing ability of many bacteria as well as salivary H2S analysis. [ABSTRACT FROM AUTHOR]

Background: The prevalence and death rate arising from malaria infection, and emergence of other diseases showing similar symptoms to malaria require the development of malaria-specific and sensitive devices for its diagnosis. To address this, the design and fabrication of low-cost, rapid, paper-based analytical devices (µPAD) using surface-immobilized aptamers to detect the presence of a recombinant malarial biomarker—Plasmodium falciparum lactate dehydrogenase (rPfLDH)—is reported in this study. Methods: Test zones on paper surfaces were created by covalently immobilizing streptavidin to the paper, subsequently attaching biotinylated aptamers to streptavidin. Aptamers selectively bound rPfLDH. The measurement of captured rPfLDH enzyme activity served as the means of detecting this biomarker. Enzyme activity across three replicate sensors was digitally quantified using the colorimetric Malstat assay. Results: Screening of several different aptamers reported in the literature showed that aptamers rLDH7 and 2008s immobilized in this manner specifically recognised and captured PfLDH. Using rLDH7, the sensitivity of the µPAD sensor was evaluated and the µPAD sensor was applied for preferential detection of rPfLDH, both in buffered solutions of the protein and in spiked serum and red blood cell lysate samples. In buffered solutions, the test zone of the µPAD sensor exhibited a KD of 24 ± 11 nM and an empirical limit of detection of 17 nM, respectively, a limit similar to commercial antibody-based sensors exposed to rPfLDH. The specific recognition of 133 nM rPfLDH in undiluted serum and blood samples was demonstrated by the µPAD. Conclusion: The reported µPAD demonstrates the potential of integrating aptamers into paper-based malarial rapid diagnostic tests. [ABSTRACT FROM AUTHOR]