Search

• Overlapping crater populations constrain the total era of martian valley formation. • Martian valleys may have formed intermittently over hundreds of millions of years. • Long-term erosion rates would have been similar to the modern Atacama Desert. A number of studies have constrained the cessation of martian valley network activity to around the Noachian-Hesperian boundary, but the total time period over which these features formed remains poorly constrained. Most attempts to ascertain valley network formative timescales rely on an intermittency factor that varies widely for terrestrial rivers and is unknown for Mars. In this contribution, superposition relationships are used to identify crater populations that pre- and postdate valley network incision, resulting in maximum cumulative valley formation times of ∼108 years. These timescales correspond with long-term erosion rates of ∼0.25 m/Myr, similar to those calculated for the Middle to Late Noachian as well as the central Atacama Desert since the Late Miocene. Assuming sediment transport rates previously calculated for other martian valley networks, this implies a minimum fluvial intermittency of ∼10−5, several orders of magnitude lower than modern day Earth rivers but similar to values independently calculated for some martian fluvial deposits. This low intermittency suggests that martian valley incision may have been significantly hindered by erosion into existing bedrock or by boulder armoring of the valley floor. Alternatively, unlike river valleys on Earth, runoff events driving martian valley network activity may have been non-seasonal, Milankovitch-like cycles, with long eras of quiescence between periods of intensified fluvial activity. [ABSTRACT FROM AUTHOR]

The Paleozoic arkoses of the Inkisi Group in both the Republic and the Democratic Republic of the Congo has been investigated in order to examine whether they can represent an alluvial fan originating from the Gondwana supermountains in Northern and East Africa. This study focuses on outcrops' description, lithofacies, bounding surfaces, architectural and sequential organization of sedimentary bodies and paleocurrents. The aim is to determine the nature of the Inkisi sandstones, the provenance of its sediments and the depositional setting, in order to test whether the East African orogen was also the sediments source for the formation of sedimentary fan in the western part of Central Africa. The study shows that the Inkisi Group consists of various sandstone lithofacies, amalgamated by conglomerates. The sediments are immature composed of quartz and feldspars associate with lithic fragments and micas. The sediments originated from the erosion of the West-Congolian belt and the Congo Craton, and were transported by braided fluvial system under mainly upper flow regime and secondarily lower flow regime. Sediments were deposited in the Inkisi basin, which was extensional and affected by burial. The Inkisi sediments setting up in a proximal to medial distributary zone of an alluvial megafan. The flows were directed southward, as opposed to paleofans originating from the Gondwana supermountain in Northern and East Africa. Thus, the Inkisi sandstone constitutes a new alluvial megafan distinguished from the Gondwana superfan derived from the Gondwana supermountain. It originated from the Pan-African belt of Mayombe and the Congo Craton. We name this megafan " the Cambro-Ordovician alluvial megafan of Central Africa ". • The Inkisi Group are arkoses and sub-arkoses associated with conglomerates. Conglomerates are gravel bars and gravity flows. • The Inkisi sediments originated from the peneplanation of the Pan-African West-Congolian/Mayombe and the Congo craton. • The Inkisi sediments were transported by a braided fluvial system and deposited in an extensional basin affected by burial. • The Inkisi Group is an alluvial megafan deposits. • The Inkisi Groupe constitutes a Lower Paleozoic alluvial megafan in Central Africa. [ABSTRACT FROM AUTHOR]

The properties of sediment grain shape provide valuable information about the transport mechanisms in different sedimentary and geomorphological environments. With the emergence of new, high-resolution analytical techniques, it has become possible to quickly examine the grain shape properties of a large number of individual mineral grains. In this study, we used automated image analysis (Malvern Morphologi G3SE-ID) to investigate mineral particles of four sediment types from different depositional environments (sand sheet (1), floodplain (2) and fluvial channel deposits (3), Pleistocene infilling material of sand wedges (4), n = 20) in the Carpathian Basin (Central Europe). Our primary objective was to identify quantitative key variables that can help objectively distinguish certain geomorphological environments located in the Carpathian Basin. In our analysis and data processing (which included techniques such as hierarchical cluster analysis, Wilks' λ, Kruskal–Wallis, multivariate analysis of variance and principal component analysis) we focused on four variables related to grain shape: circularity (form), convexity (surface texture), solidity (roundness) and elongation (form). The form of sedimentary grains depends largely on the physical properties of their source area, while the roundness depends on the energy of the transport medium and the distance of transportation. Surface texture or convexity can change in a relatively short time in a fluvial environment. The study revealed that distinguishing geomorphological environments can be achieved by analyzing the circularity, convexity and solidity parameters of the sediment grains. Based on the established grouping, the analyses carried out with hundred repetitions showed that high sensitivity circularity, convexity and solidity variables were the most effective attributes regarding Kruskal–Wallis test statistics that provided significant (p < 0.001) results between the analyzed sedimentary environments, while the elongation was not able to provide significant results between the grouped samples. Statistical analyses of the MANOVA test with hundredfold repetitions showed significant differences between the derived groups. Wilks' λ test statistics and PCA showed that convexity and high sensitivity circularity discriminate the groups. Separate analyses of aeolian and fluvial sediments have been carried out. The Kruskal–Wallis analysis of variance showed the significant differences considering all four variables, and differences were also significant in the case of the MANOVA test. Wilks' λ test statistics and PCA showed that convexity, high sensitivity circularity and solidity discriminate the groups. According to our results, the circularity parameter can provide information about the transport distance, while the solidity parameter can indicate the transport energy. The convexity parameter can serve as an indicator of both transport distance, as well as post-depositional processes. Some infilling materials underwent multiple transport processes, including high energy aqueous, wind transport mechanisms, and the post-depositional alteration process (frost weathering), while others originated from sand-sheet covered areas (active during Pleistocene glacials). The solidity parameter proved effective in separating sediments with similarly high convexity values (smooth surface), which were, in our case, from recent aeolian and fluvial environments. This result was due to the investigated fluvial sediments that inherited their form and low level of roundness from their source area. Our research supports that aeolian transport is more effective in rounding the grains than the aqueous environment. Using automated static image analysis producing statistically stable results with hundreds of analyzed mineral grains provides useful indicators for paleogeographical reconstruction studies by investigating paleo and recent sediments. • The high HS circularity values can indicate a longer transport distance. • The solidity factors can be used to identify relative transport energy. • The convexity variable may indicate the post-depositional process. • The low level of roundness can be inherited from the source environment. • Automated static image analysis produces statistically robust results on mineral grains. [ABSTRACT FROM AUTHOR]

Dams are major obstructions to the flow of water and the transport of sediment in rivers. Much work has shown the construction of dams, and storage of sediment in reservoirs, can lead to significant changes in the morphodynamic behavior of alluvial rivers; however, in most cases, the effect of damming has a finite downstream limit as sediment is supplied back to the river through channel bed/bank erosion and/or tributary inputs. Here we present a study of a natural experiment that isolates one source of sediment downstream of a dam – the lower Rio Grande, which has no major tributary inputs of sediment over a ~450 km reach, from Falcon Dam to the coast. Analysis of the morphology and topography of the Rio Grande shows that prior to damming in the 1950s the coastal Rio Grande was a kinematically active channel with large, subaerial point bars. Subsequent to damming, lateral migration of the river shut down and exposed point bars shrunk in size, becoming static and vegetated. Bathymetric survey data show meter-scale incision of the channel bed for hundreds of kilometers downstream of the dam. Entrenchment of the river is also evidenced by the development of steep banks on the inner portions of channel bends. Damming also impacted the interaction between the river and the floodplain, resulting in the formation of persistent gullies incised into the channel banks, suggesting transport of water and sediment is net positive into, not out of, the channel. Based on all of these observations we conclude that the full ~450 km reach of the Rio Grande, from Falcon Dam to the coast, became net degradational following dam closure. We conclude that the presence of such a long degrading reach is caused by the exposure of bedrock in the Rio Grande channel for nearly 100 km downstream of the dam, which, combined with the lack of tributaries, limits downstream sediment supply to the river. Our results provide new insights into the response to damming for rivers with no tributary sediment input and thin alluvial cover, and more broadly to the kinematic and channel geometry responses to a major drop in water discharge and sediment supply for coastal meandering rivers. • We investigate the response of the coastal Rio Grande to 1950s dam construction. • Image, topography and bathymetric data show the river has become net degradational. • Degradation affects the river all the way to the coast, a length of ~450 km. • This reach has no tributary sediment input and the upstream channel exposes bedrock. • These attributes limit sediment supply resulting in large length of degradation. [ABSTRACT FROM AUTHOR]

Understanding the pace of erosion through space and time may provide insight into how tectonic and climatic processes conspire to drive landscape evolution. However, determining whether erosion rates in a given locality have varied with past climate change remains challenging, and the mechanisms invoked to explain variations in past erosion rates are not well understood. In this study, we evaluate past rates of erosion during the late Quaternary along the northern Qilian Shan, the range bounding the northeastern margin of the Tibetan Plateau. We measured the concentrations of cosmogenic 10Be from fluvial deposits atop 5 terraces along the Hongshuiba River and average 10Be concentrations at the time of terrace formation. We also determined terrace ages by combining 5 10Be depth profiles and 15 OSL samples of overlying loess. Our results confirm previous dating of this terrace sequence using cosmogenic exposure ages of boulders and depth profiles in terrace gravels and indicate that terrace treads span glacial-interglacial cycles over the past ~200 ka. We exploit this exceptionally dense sampling of 10Be to evaluate differences in cosmogenic 10Be concentrations at the time of terrace formation along the Hongshuiba River. Analysis of 48 individual determinations of "inherited" 10Be concentrations reveal that fluvial sediment in terraces abandoned during the last glacial and penultimate glacial periods are 3–4 times greater than concentrations in sediment atop terraces formed during interglacial times. Paleoerosion rates within the Hongshuiba watershed appear to have been ~200 m/Myr during glacial episodes but increased to ~500–700 m/Myr during interglacial times, similar to recent erosion rates inferred from 10Be in modern sediment. These results point to likely changes in the mean residence time of sediment with the watershed that fluctuate in association with 100-ka glacial-interglacial cycles. We suggest that reductions in erosion rates associated with glacial conditions may have been driven by changes in catchment hydrology during cold and dry periods. • Late Quaternary erosion study from the northern Qilian Shan, Tibetan Plateau margin • 10Be-derived catchment-wide erosion rates from dated Hongshuiba River terraces • Erosion rates vary from ~200 m/Myr (glacial) to ~500–700 m/Myr (interglacial/modern) • Erosion rate fluctuations occur across 100-ka glacial-interglacial cycles • Hydrological changes drive variations in catchment sediment production and transport [ABSTRACT FROM AUTHOR]