Search

This paper presents measurements using a dual-polarised radiometer operating at 93 GHz to detect ice or water on asphalt in laboratory conditions. The brightness temperatures of both H and V polarizations were measured for a dry surface, liquid water, and ice on asphalt at observation angles of 50° and 56°. The results presented in this paper demonstrate that the studied road conditions can be identified by the radiometer. The measurements are compared with a model and surface parameters, such as dielectric constant and roughness are fitted and compared to reference values. The experiments and results, described in this article, are the first steps towards the future installation of a polarimetric sensor on a moving vehicle for traffic safety. [ABSTRACT FROM AUTHOR]

The Temporal Experiment for Storms and Tropical Systems Technology Demonstration (TEMPEST-D) instrument is a five-frequency millimeter-wave radiometer operating from 87 to 181 GHz. The cross-track scanning radiometer has been operating on a 6U CubeSat in low Earth orbit since September 5, 2018. The direct-detection architecture of the radiometer reduces its mass and power consumption by eliminating the need for a local oscillator and mixer, also reducing system complexity. The instrument includes a scanning reflector and ambient calibration target. The reflector rotates continuously to scan the antenna beams in the cross-track direction, first across the blackbody calibration target, then toward the Earth over the full range of incidence angles, and finally to cosmic microwave background radiation at 2.73 K. This enables precision end-to-end calibration of the millimeter-wave receivers during every 2-s scan period. The TEMPEST-D millimeter-wave radiometers are based on 35-nm indium phosphide (InP) high-electron-mobility transistor (HEMT) low-noise amplifiers. This article describes the instrument and its characterization prior to launch. [ABSTRACT FROM AUTHOR]

A low noise, high gain, stable radiometer front-end is presented for non-invasive tissue thermometry using custom designed narrow band low noise amplifiers (LNAs) and band pass filter (BPF) with 1.3 GHz centre frequency and − 20 dB pass band of 332 MHz. The fabricated LNAs have >15 dB gain, unconditional gain stability and noise figure (NF) < 1.45 dB in the pass band. The maximum insertion loss of the BPF is <1 dB over 1.2-1.4 GHz with 50 dB suppression in the surrounding communication bands. The cascaded radiometer front-end has measured gain of 45-50 dB, NF < 1.75 dB in the pass band and > 30 dB suppression in the adjacent personal communication bands. The Allan deviation of the total power radiometer indicates long term system stability and presence of Gaussian thermal noise for integration time, . Radiometer measurements of a matched load at room temperature for indicate acceptably low influence of external electromagnetic interference (EMI) and system noise equivalent temperature of 145 K. The brightness temperature measured by the total power radiometer using a resonant slot antenna demonstrates the ability to detect a 0.3°C change in the test load temperature with better than 0.1°C accuracy. [ABSTRACT FROM AUTHOR]

Methods to model snow aggregate scattering properties at microwave frequencies can be divided into structurally explicit and implicit techniques. Explicit techniques, such as the discrete dipole approximation (DDA), determine scattering and backscatter cross-sections assuming full knowledge of a given snow particle’s structure. Such calculations are computationally expensive. Implicit techniques, such as using the T-matrix method (TMM) with optically soft spheroids, model equivalent particles with variable mass, bulk density and aspect ratio according to an effective-medium approximation. It is highly desirable that there should be a good agreement between modeled aggregate cross-sections using both methods. A Voronoi bounding-neighbor algorithm is presented in this study to determine the bulk equivalent density of complex three-dimensional snow aggregates. While mass and aspect ratio are easily parameterized quantities, attempts to parameterize the bulk density of snowflakes have usually relied on a bounding ellipsoid, which can be determined from a flake’s radius of gyration, root mean square mean or simply from its maximum diameter. We compared the Voronoi algorithm against existing bounding spheroid approaches and mass–effective density relations at ten frequencies from 10.65 to 183.31 GHz, using a set of 1005 aggregates with maximum dimensions from a few hundred microns to several centimeters. When using the Voronoi-determined effective density, the asymmetry parameter, scattering, and backscatter cross-sections determined using the TMM reasonably match those for DDA-computed snow aggregates. From K u to W-band, soft spheroids can reproduce cross-sections for aggregates up to 9 mm in maximum dimension. Volume-integrated cross-sections always agree to within 25% of DDA. As the DDA is computationally expensive, this offers a fast alternative that efficiently evaluates scattering properties at microwave frequencies. [ABSTRACT FROM AUTHOR]

The joint National Aeronautics and Space Administration and Japanese Aerospace Exploration Agency (JAXA) Global Precipitation Measurement (GPM) mission will provide considerably more observations over complex and dynamically changing land backgrounds. A physically based precipitation retrieval using GPM's satellite constellation of passive microwave (PMW) observations has to accommodate the spatially and temporally varying radiometric signature of the land surface to constrain the set of candidate rainfall solutions. The challenge for retrieval algorithms is to identify and isolate precipitation profiles whose simulated observations agree with the satellite observations and are also representative of the surface conditions. Microwave emissivity modeling results are presented from a physically based land algorithm that retrieves soil moisture, vegetation water content, and surface temperature, along with the emissivity using polarized 10, 18, and 37 GHz channel measurements from the WindSat sensor onboard the Coriolis satellite, and results from the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI). The emissivity mean, coefficient of variation, covariance, and correlation slope are examined for the range of clear-scene surface properties observed by WindSat and TRMM between 2003-2012 and 2002-2011, respectively, under a range of seasons, time of day, rain events, etc. These joint data provide a means to examine the extent to which the surface geophysical properties control the microwave land surface emissivity covariability, to better utilize these lower frequency observations in overland PMW-based precipitation retrievals. [ABSTRACT FROM PUBLISHER]

The Global Precipitation Measurement (GPM) Dual-Frequency Precipitation Radar (DPR) (Ku- and Ka-band, or 14 and 35 GHz) provides the capability to resolve the precipitation structure under moderate to heavy precipitation conditions. In this manuscript, the use of near-coincident observations between GPM and the CloudSat Profiling Radar (CPR) (W-band, or 94 GHz) are demonstrated to extend the capability of representing light rain and cold-season precipitation from DPR and the GPM passive microwave constellation sensors. These unique triple-frequency data have opened up applications related to cold-season precipitation, ice microphysics, and light rainfall and surface emissivity effects. [ABSTRACT FROM AUTHOR]

Offshore of many coastal regions, the ocean surface wind varies in speed and direction throughout the day, owing to forcing from land/sea temperature differences and orographic effects. Far offshore, both diurnal and semidiurnal wind vector variability has been noted in the Tropical Atmosphere Ocean-TRIangle Trans-Ocean buoy Network (TAO-TRITON) mooring data in the tropical Pacific Ocean. In this manuscript, the tropical diurnal wind variability is examined with microwave radiometer-derived winds from the Tropical Rainfall Measuring Mission (TRMM) and the Global Precipitation Measurement (GPM), merged with RapidScat and other scatterometer data. Since the relationship between wind speed and its zonal and meridional components is nonlinear, this manuscript describes an observationally based methodology to merge the radiometer and scatterometer-based wind estimates as a function of observation time, to generate a multi-year dataset of diurnal wind variability. Compared to TAO-TRITON mooring array data, the merged satellite-derived wind components fairly well replicate the semidiurnal zonal wind variability over the tropical Pacific but generally show more variability in the meridional wind components. The meridional component agrees with the associated mooring location data in some locations better than others, or it shows no clear dominant diurnal or semidiurnal mode. Similar discrepancies are noted between two forecast model reanalysis products. It is hypothesized that the discrepancies amongst the meridional winds are due to interactions between surface convergence and convective precipitation over tropical ocean basins. [ABSTRACT FROM AUTHOR]

A low-mass and low-volume dual-polarization L-band radiometer is introduced that has applications for ground-based remote sensing or unmanned aerial vehicle (UAV)-based mapping. With prominent use aboard the ESA Soil Moisture and Ocean Salinity (SMOS) and NASA Soil Moisture Active Passive (SMAP) satellites, L-band radiometry can be used to retrieve environmental parameters, including soil moisture, sea surface salinity, snow liquid water content, snow density, vegetation optical depth, etc. The design and testing of the air-gapped patch array antenna is introduced and is shown to provide a 3-dB full power beamwidth of 37°. We present the radio-frequency (RF) front end design, which uses direct detection architecture and a square-law power detector. Calibration is performed using two internal references, including a matched resistive source (RS) at ambient temperature and an active cold source (ACS). The radio-frequency (RF) front end does not require temperature stabilization, due to characterization of the ACS noise temperature by sky measurements. The ACS characterization procedure is presented. The noise equivalent delta (Δ) temperature (NEΔT) of the radiometer is ~0.14 K at 1 s integration time. The total antenna temperature uncertainty ranges from 0.6 to 1.5 K. [ABSTRACT FROM AUTHOR]

This paper presents the broadband antenna for the microwave radiometric sensing of internal body temperature. For broadband operation, the bow-tie antenna was designed and backed with a cylindrical cavity, which decreased environmental electromagnetic interference and also improved the directivity of the antenna. The broadband impedance-transforming balun in microstrip form was also designed to feed the bow-tie antenna, and was located inside the cavity. An impedance-matching dielectric layer (IMDL) was introduced on top of the bow-tie antenna, for impedance match with the human body with high permittivity. The fabricated antenna was measured in free space with the IMDL removed, showing an input reflection coefficient lower than −10 dB from 2.64 to > 3.60 GHz with antenna gain over 6.0 dBi and radiation efficiency over 74.7% from 2.7 to 3.5 GHz. The IMDL was re-installed on the cavity-backed bow-tie antenna to measure the antenna performance for the human head with relative permittivity of about 40. The measured reflection coefficient was as low as −28.9 dB at 2.95 GHz and lower than −10 dB from 2.65 to > 3.5 GHz. It was also shown that the designed antenna recovered a good impedance match by adjusting the permittivity and thickness of the IMDL for the different parts of the human body with different permittivities. [ABSTRACT FROM AUTHOR]

Accurate representation of the ocean-atmosphere coupling in weather, wave and climate models requires reliable estimates of air-sea surface fluxes of momentum, heat and mass. Whitecap fraction (W) usually quantifies the enhancement of the surface fluxes due to wave breaking. Satellite-based passive remote sensing of W from ocean surface brightness temperatures ( T B s) observes open ocean surface fluxes at low spatial resolution. Radiometric surface observations at higher resolution are necessary to monitor the complex environment in the coastal zone and in polar regions. We assess the feasibility of using the millimeter-wave frequencies (89 to 150 GHz) to observe whitecaps. We evaluate the derivative of the T B with respect to W as a measure for the observation of W. We describe the models and data used to evaluate the T B sensitivity to W for different instrumental and environmental conditions. Atmospheric absorption limits the ability to observe the surface at millimeter-wave frequencies. We find that the T B sensitivity to W at 89 GHz may be sufficient to support limited W retrieval from observations at altitudes below 1 km and that the T B sensitivity at 113 and 150 GHz is not sufficient. Clear skies, and low to moderate atmospheric humidity favor whitecap observations. [ABSTRACT FROM AUTHOR]