Search

Composite materials are materials that are made of two or more materials that remain separate and differ on a macroscopic level while forming a single component so as to produce a composite material that has different mechanical properties and characteristics from the material it forms. Particle composite materials consist of particles held together by a matrix. In this study, an epoxy resin matrix was used with Polymesoda erosa clam shell nanopowder filler. Nano-sized fillers have many advantages over macro-sized ones. The nano-sized particles will have a high surface area, thereby increasing the mechanical strength of the material. The powdered nanoparticles produced will be analyzed using Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM), and Scanning Electron Microscope (SEM). Based on the results of SEM and TEM, the nanopowder of clamshell has a size below 100 nm. The FTIR results of the powdered shellfish showed the presence of carbonate bonds C-O, C=O, and Ca-O. [ABSTRACT FROM AUTHOR]

Abstract: A novel nanopolymeric composite powdered material was prepared by physical immobilization of the sol‐gel prepared zirconia nanoparticles (ZrO2NPs) into poly (acrylonitrile‐ co‐pyrrole) (poly (AN‐co‐py)) copolymer. The prepared copolymer composite was characterized using scanning electron microscope (SEM) and Fourier Transfer infrared spectrophotometer (FT‐IR). SEM images investigated its homogeneous spherical morphological structure with an average diameter of 60 nm. The potential of this nanopolymeric composite material to remove a basic dye (Basic Red 46) was evaluated in a batch process. The improvement in material dosage, solution pH, and temperature has positive impact on the dye decolonization process. The maximum dye decolonization was 87.7% that recorded using 0.5 g from the composite matrix within 150 min. The kinetic data analysis indicated that the dye adsorption is a second‐order process. The results indicated that the prepared nanopolymeric composite could be an alternative for more costly adsorbents used for dye removal. [ABSTRACT FROM AUTHOR]

Skin loss is one of the oldest and still not totally resolved problems in the medical field. Since spontaneous healing of the dermal defects would not occur, the regeneration of full thickness of skin requires skin substitutes. Tissue engineering constructs would provide a three dimensional matrix for the reconstruction of skin tissue and the repair of damage. The aim of the present work is to develop a chitin based scaffold, by blending it with poly(butylene succinate) (PBS), an aliphatic, biodegradable and biocompatible synthetic polymer with excellent mechanical properties. The presence of chondroitin sulfate nanoparticles (CSnp) in the scaffold would favor cell adhesion. A chitin/PBS/CSnp composite hydrogel scaffold was developed and characterized by SEM (Scanning Electron Microscope), FTIR (Fourier Transform Infrared Spectroscopy), and swelling ratio of scaffolds were analyzed. The scaffolds were evaluated for the suitability for skin tissue engineering application by cytotoxicity, cell attachment, and cell proliferation studies using human dermal fibroblasts (HDF). The cytotoxicity and cell proliferation studies using HDF confirm the suitability of the scaffold for skin regeneration. In short, these results show promising applicability of the developed chitin/PBS/CSnps ternary composite hydrogel scaffolds for skin tissue regeneration. [ABSTRACT FROM AUTHOR]

The effect of various combinations of filler materials on the performance of polypropylene (PP)-based composites was investigated. PP in particulate form was used as the matrix. Milled short carbon fiber (SCF) micro-size, graphite nano-platelet (GNP), and titanium dioxide nanoparticles (nTiO2) were used as fillers. These fillers were incorporated in the polymer matrix to produce mono-filler (PP/SCF and PP/nanofiller) and hybrid composites. Hybrid composites consist of PP/10SCF/GNP, PP/10SCF/nTiO2, and PP/10SCF/GNP/nTiO2. The effect of the addition of SCF, GNP, and nTiO2 on PP-based composites was investigated by analyzing their morphological, mechanical, and physical properties. The addition of mono-filler to the PP matrix improved the mechanical properties of the composites when compared to the neat PP. The ultimate tensile strength (UTS), flexural modulus, flexural strength, and impact toughness of the hybrid composites with 15 wt % total loading of fillers, were higher than that of mono-filler composites with 15 wt % SCF (PP/15SCF). A maximum increase of 20% in the flexural modulus was observed in the hybrid composite with 10 wt % of SCF with the additional of 2.5 wt % GNP and 2.5 wt % nTiO2 when compared to PP/15SCF composite. The addition of 2.5 wt % nTiO2 to the 10 wt % SCF reinforced PP, resulted in increasing the strain at break by 15% when compared to the PP/10SCF composite. A scanning electron microscope image of the PP/10SCF composite with the addition of GNP improved the interfacial bonding between PP and SCF compared with PP/SCF alone. A decrease in the melt flow index (MFI) was observed for all compositions. However, hybrid composites showed a higher decrease in MFI. [ABSTRACT FROM AUTHOR]