Search

Residential buildings account for 84 % of Italy's built environment, playing a pivotal role in the EU's aim to cut GHG emissions by 55 % through enhanced energy efficiency and climate adaptation. This necessitates comprehensive energy retrofit initiatives, especially in sectors like social housing, which has been relatively overlooked in terms of energy efficiency strategies. This study focuses on a multi-story building from the 1980s in Rome, implementing an innovative energy system proposed by the RESHeat European project. This system, aimed at standardizing energy retrofits for late 20th-century social housing, leverages the underexplored potential of water-source heat pump (WSHP) systems. The novelty of this research extends to its examination of multi-family housing, a sector that has seen less attention compared to public spaces and smaller residential buildings. Through experimental validation and annual dynamic simulations using TRNSYS and Simulink, the research compares the existing heating system with a proposed upgrade that includes a WSHP and Photovoltaic-Thermal (PVT) panels. This upgrade demonstrated a significant efficiency improvement, achieving an annual COP of 6.1 for the WSHP and a 36 % Primary Energy Savings (PES) from the PVT panels, showcasing the effectiveness of these technologies in enhancing the energy profile of multi-family residential buildings. [Display omitted] • A multi-energy system for a 1980s social housing in mild climate is presented. • A dynamic model based on a water-source HP and cooled PV panels was set. • Experimental validation of building and plant components were conducted. • Combining heat pump and PVT panels a seasonal COP of 5.4 can be achieved in heating. • Solar fraction of 0.98 ensured by PVT contributes to a Primary Energy Saving of 36 %. [ABSTRACT FROM AUTHOR]

This study aims to investigate the effect of demand response (DR) on power and energy flexibilities with three types of district heated buildings (apartment building, cultural center, and office building) in Finland and Germany. A rule-based control algorithm was applied for the DR control with two country-specific dynamic district heating (DH) prices, the more fluctuating Finnish synthetic DH price and the flatter German synthetic DH price. This research was implemented with the validated dynamic building simulation tool IDA ICE. Set-point smoothing of the indoor air temperature was applied to minimize the rebound effect. Nighttime set-back was adopted in the cultural center and the office building. The results show that the DR control without smoothing creates additional peaks in power demand, while the set-point smoothing significantly decreases the peak power demand. The DR control can significantly shape the heating power demand of the buildings and increase energy flexibility. The range of the resultant seasonal energy flexibility factors is from 3 to 26% for charging and from −6 to −31% for discharging, depending on the building types and countries. Cases with nighttime set-back have higher power and energy flexibilities, while this causes additional peaks, which is detrimental to DH systems. [ABSTRACT FROM AUTHOR]

Renovation of existing buildings is important in the work toward increased energy efficiency and reduced environmental impact. The present paper treats energy renovation measures for a Swedish district heated multi-family house, evaluated through dynamic simulation. Insulation of roof and façade, better insulating windows and flow-reducing water taps, in combination with different HVAC systems for recovery of heat from exhaust air, were assessed in terms of life cycle cost, discounted payback period, primary energy consumption, CO 2 emissions and non-renewable energy consumption. The HVAC systems were based on the existing district heating substation and included mechanical ventilation with heat recovery and different configurations of exhaust air heat pump. Compared to a renovation without energy saving measures, the combination of new windows, insulation, flow-reducing taps and an exhaust air a heat pump gave up to 24% lower life cycle cost. Adding insulation on roof and façade, the primary energy consumption was reduced by up to 58%, CO 2 emissions up to 65% and non-renewable energy consumption up to 56%. Ventilation with heat recovery also reduced the environmental impact but was not economically profitable in the studied cases. With a margin perspective on electricity consumption, the environmental impact of installing heat pumps or air heat recovery in district heated houses is increased. Low-temperature heating improved the seasonal performance factor of the heat pump by up to 11% and reduced the environmental impact. [ABSTRACT FROM AUTHOR]