Search

Carbon paper is commonly used for catalytic electrode preparation because of its high conductivity, corrosion resistance, and stability. However, traditional electrode preparation methods are inappropriate for highly hydrophobic carbon paper. In this paper, a high‐activity carbon paper catalytic electrode was prepared using multistrategies cold plasma modification to create atomic structural defects, dope N and Cu elements, and introduce oxygen‐containing functional groups. Analyses show that the bombardment of high‐energy particles caused atomic structural defects. Nitrogen and copper entered the carbon paper through plasma‐induced chemical recombination and physical adsorption, reaching 5.26% and 3.83%, respectively. Ethanol‐based plasma introduced oxygen‐containing functional groups to improve hydrophilicity. Finally, the plasma‐prepared electrode exhibited a reduction efficiency of 87.69% in an electrocatalytic nitrate reduction reaction. [ABSTRACT FROM AUTHOR]

Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial‐catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces‐based technologies for use in the textile and pulp‐milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment. [ABSTRACT FROM AUTHOR]

Aims: Information on breastfeeding and safety of biologics in infants is lacking due to difficulties in case collection. We evaluated methods for determining the concentration of biologics in breast milk using a dry filter method that can simplify the collection, storage and transport of breast milk. Methods: To generate dried filter paper (DFP) samples, approximately 30 μL of breast milk was placed onto a Whatman 903 card and punched out. After extraction, the supernatant was measured using an enzyme‐linked immunosorbent assay. Three concentrations of each drug were prepared in liquid breast milk (LBM) and DFP samples to determine their stability up to 28 days after storage at 2–8°C or −20°C for LBM and 25 ± 5°C for DFP. LBM and DFP samples were also provided by nursing mothers using biologics during lactation, and drug concentrations in both samples were compared. The agreement between the two measurement methods was confirmed by Bland–Altman analysis. Results: Breast milk was provided by 12 mothers who used biologics (tocilizumab, abatacept, etanercept, golimumab, sarilumab and belimumab). The coefficients of variation for within‐run and between‐run precision for the six drugs were within 15% for both LBM and DFP, and accuracy was within 90%–110% of the quality controls. After 28 days, concentrations remained at more than 90%. The difference between the values obtained by each method was within the acceptable range of error (−12.1 to +16.6 ng/mL). Conclusions: A method for determining the concentration of biologics using DFP is expected to help improve pharmacotherapy for lactating women. [ABSTRACT FROM AUTHOR]

Industrial waste locks are used as raw materials to reduce harmful effects on the environment and improve environmental performance. Marble clay powder can be used as a filling aid and can fill voids in concrete structures. This article will show you how to use a maximum natural sand alternative in concrete with marble powder and quarry dust. The challenge of the 21st century is to change to a new form that can support the natural system. This necessitates a radical rethinking of how to give the community infrastructure and housing. Making a concerted effort to develop novel, innovative, and alternative construction materials may be necessary. Jungles of concrete around cause's impact on the Environment and it would result in climate change. Mankind must avoid the use of things that are detrimental to the environment. So in this paper, it is decided to address the issue by adopting the use of the green concrete concept which is environmentally friendly. Green concrete is concrete made up using industrial wastes such as marble powder, quarry dust, wood ash, paper pulp, etc. Green concrete, which is capable of sustainable development, helps to reduce the consumption of natural resources, energy use, and environmental pollution. Green concrete is more cost‐effective than ordinary concrete and reduces the cost of resultant concrete by 14%–20%. It is also observed that the alkali‐aggregate reaction and sulfate attack resistance of concrete are both significantly improved. Green concrete is a useful tool for lowering environmental pollution and enhancing concrete's resistance to harsh conditions. All stages of infrastructure construction and rehabilitation will follow this trend of using new cement and techniques. Green concrete's adaptability and its performance derivatives will meet a variety of future needs. [ABSTRACT FROM AUTHOR]

Direct air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC. [ABSTRACT FROM AUTHOR]

To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p <.001). Urinalysis performed better in sensitivity (77.3% vs. 40.9%, p =.04) and the area under the receiver operating characteristic curves (AUC) (0.84 [95% CI 0.74–0.94] vs. 0.69 [95% CI 0.55–0.83], p =.04) than CRD, respectively. The sensitivity, specificity, AUC of the parallel test of them is 86.4% (64.0%–96.4%), 89.1% (85.5%–92.0%), and 0.88 (95% CI 0.79–0.96). And the serial test is 31.8% (14.7%–54.9%), 98.7% (96.8%–99.5%), 0.65 (95% CI 0.51–0.79), accordingly. The urinalysis is a better diagnosing test for preeclampsia. CRD could aid in the diagnosis of patients with preeclampsia. Combined the two tests in suspected patients may further improve the performance in the diagnosis of preeclampsia. Further study need to be made for its potential clinical practice. [ABSTRACT FROM AUTHOR]

Objective: To determine the accuracy of high‐risk human papillomavirus (HPV) DNA samples on filter paper in comparison to specimen transport medium (STM). Methods: This was a cross‐sectional diagnostic study of 42 consecutive women who were prospectively recruited. Each had self‐collected vaginal samples on filter paper, physician‐collected cervical samples on filter paper, and physician‐collected cervical samples in STM. HPV DNA testing was performed with a Hybrid Capture 2 system (Qiagen). Sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and agreement of filter paper methods with the standard procedure were calculated. Results: The overall prevalence of HPV in STM was 67.5%. Detection of HPV DNA in the physician‐collected cervical samples on filter paper had a sensitivity of 77.8%, a specificity of 100%, a PPV of 100%, and an NPV of 68.4%. The patient's self‐sampling on filter paper had a sensitivity of 66.7%, a specificity of 100%, a PPV of 100%, and an NPV of 59.1%. The agreement between STM method and physician‐collected sample on filter paper was substantial, (κ = 0.695, P < 0.001), while the agreement between STM and self‐collected samples on filter paper was moderate (κ = 0.565, P < 0.001). Most patients reported that self‐collection was acceptable (100%), painless (95%), and not embarrassing (95%). Conclusion: Filter paper, with dried self‐collected vaginal samples, can be used to detect high‐risk HPV with acceptable accuracy. Synopsis: Self‐collected vaginal samples on filter paper, to detect high‐risk human papillomavirus, is better for women, easier to transport to central laboratories, and has acceptable accuracy. [ABSTRACT FROM AUTHOR]

This study attempts to detect papers originating from the Russia‐based paper mill 'International Publisher' LLC. A total of 1,063 offers to purchase co‐authorship on a fraudulent papers published from 2019 to mid‐2022 on the 123mi.ru website were analysed. This study identifies at least 451 papers that are potentially linked to the paper mill, including one preprint, a duplication paper and 16 republications of papers erroneously published in hijacked journals. Evidence of suspicious provenance from the paper mill is provided: matches in title, number of co‐authorship slots, year of publication, country of the journal, country of a co‐authors and similarities of abstracts. These problematic papers are co‐authored by scholars from at least 39 countries and are submitted to both predatory and reputable journals. This study also demonstrates collaboration anomalies in questionable papers and examines indicators of the Russia‐based paper mill. The value of co‐authorship slots offered by 'International Publisher' LLC from 2019 to 2021 is estimated at $6.5 million. Since this study only analysed a single paper mill, it is likely that the number of papers with forged authorship is much higher. [ABSTRACT FROM AUTHOR]

Background: Regulatory aspects of transfusion medicine add complexity in blinded transfusion trials when considering various electronic record keeping software and blood administration processes. The aim of this study is to explore strategies when blinding transfusion components and products in paper and electronic medical records. Methods: Surveys were collected and interviews were conducted for 18 sites across various jurisdictions in North America to determine solutions applied in previous transfusion randomized control trials. Results: Sixteen responses were collected of which 11 had previously participated in a transfusion randomized control trial. Various solutions were reported which were specific to the laboratory information system (LIS) and electronic medical record (EMR) combinations although solutions could be grouped into four categories which included the creation of a study product code in the LIS, preventing the transmission of data from the LIS to the EMR, utilizing specialized stickers and labels to conceal product containers and documents in the paper records, and modified bedside procedures and documentation. Discussion: LIS and EMR combinations varied across sites, so it was not possible to determine combination‐specific solutions. The study was able to highlight solutions that may be emphasized in future iterations of LIS and EMR software as well as procedural changes that may minimize the risk of unblinding. [ABSTRACT FROM AUTHOR]

The erratic, intermittent, and unpredictable nature of sweat production, resulting from physiological or psychological fluctuations, poses intricacies to consistently and accurately sample and evaluate sweat biomarkers. Skin‐interfaced microfluidic devices that rely on colorimetric mechanisms for semi‐quantitative detection are particularly susceptible to these inaccuracies due to variations in sweat secretion rate or instantaneous volume. This work introduces a skin‐interfaced colorimetric bifluidic sweat device with two synchronous channels to quantify sweat rate and biomarkers in real‐time, even during uncertain sweat activities. In the proposed bifluidic‐distance metric approach, with one channel to measure sweat rate and quantify collected sweat volume, the other channel can provide an accurate analysis of the biomarkers based on the collected sweat volume. The closed channel design also reduces evaporation and resists contamination from the external environment. The feasibility of the device is highlighted in a proof‐of‐the‐concept demonstration to analyze sweat chloride for evaluating hydration status and sweat glucose for assessing glucose levels. The low‐cost yet highly accurate device provides opportunities for clinical sweat analysis and disease screening in remote and low‐resource settings. The developed device platform can be facilely adapted for the other biomarkers when corresponding colorimetric reagents are exploited. [ABSTRACT FROM AUTHOR]

Three‐dimensional paper‐based microfluidic devices have shown great potential in various applications, including point‐of‐care diagnostics, environmental monitoring, and tissue engineering. However, their fabrication is still limited to stacking and origami methods. Inspired by the art of bamboo braiding in China, we developed a novel fabrication technique based on the braiding concept to create three‐dimensional paper‐based microfluidic devices with PDMS‐impregnated paper substrate as the building units. The resulting three‐dimensional paper device brings unique advantages, including compactness, facile disassembly, and real‐time flow visualization. The multiplexed glucose analysis with a braided device integrated with 16‐switchable valves for flow control was further fabricated to demonstrate the device's applicability. We envision braiding‐based fabrication technology opening new possibilities and bringing broad applications for three‐dimensional paper microfluidic devices. [ABSTRACT FROM AUTHOR]

Printed electronic paper identifies its interest in flexible organic electronics and sustainable and clean energy applications because of its straightforward production method, cost‐effectiveness, and positive environmental impact. However, current limitations include restricted material thickness and the use of supporting substrate for printing. Here, 2D and 3D electronic patterned paper are fabricated from direct ink writing (DIW) nanocellulose and PEDOT:PSS‐based materials using syringe deposition and 3D printing. The conductor patterns are integrated in the bulk of the paper, while non‐conductive sections are used as support to form free‐standing paper. The strong interface between the patterns of electronic patterned paper gives mechanical stability for practical handling. The conductive paper‐based electrode has 202 S cm−1 and is capable of handling electric current up to 0.7 A, which can be used for high‐power devices. Printed supercapacitor papers show high specific energy of 4.05 Wh kg−1, specific power of 4615 W kg−1 at 0.06 A g−1, and capacitance retention above 95% after 2000 cycles. The new design structure of electronic patterned papers presents a solution for additive manufacturing of paper‐based composites for supercapacitors, wearable electronics, or sensors for smart packaging. [ABSTRACT FROM AUTHOR]

Paper‐based cultural relics are of great value and have been facing irreversible damage caused by multiple factors, among which acid hydrolysis and ultraviolet photodegradation are the main processes leading to paper deterioration. Paper protection highly relies on a limited range of materials with single functions, and the design of new materials that ensure long‐term safety and efficiency by simultaneously addressing the issues of acidification and UV degradation in paper is highly desired. In this study, the introduction of carbon dots (CDs)‐enhanced layered double hydroxides (LDH) 0D/2D nanohybrids (CDs/Mg‐Al LDH)  is proposed as novel dual‐functional materials for paper protection against UV degradation and acidification. Through a CDs‐assisted in situ growth strategy, CDs/Mg‐Al LDH with ultrathin thickness (≈9.1 nm) and CDs‐intercalated structure are achieved. The CDs/Mg‐Al LDH nanohybrids demonstrate high dispersibility, strong UV absorption, and remarkable photostability, resulting in protected‐paper with decelerated acidification, oxidation, and yellowing degradation processes under both accelerated UV‐aging and dry‐heat conditions. Additionally, the protected‐paper can emit uniform blue light under 365 nm UV excitation allows for easy identification of the distributed CDs/Mg‐Al LDH within the paper, marking a unique and practical feature. This research paces a new direction for the protection of paper‐based relics with emerging carbon dots‐based 0D/2D nanomaterials. [ABSTRACT FROM AUTHOR]

Personalized healthcare management is an emerging field that requires the development of environment‐friendly, integrated, and electrochemical multimodal devices. In this study, the concept of integrated paper‐based biosensors (IFP−Multi) for personalized healthcare management is introduced. By leveraging ink printing technology and a ChatGPT–bioelectronic interface, these biosensors offer ultrahigh areal‐specific capacitance (74633 mF cm−2), excellent mechanical properties, and multifunctional sensing and humidity power generation capabilities. More importantly, the IFP−Multi devices have the potential to simulate deaf‐mute vocalization and can be integrated into wearable sensors to detect muscle contractions and bending motions. Moreover, they also enable monitoring of physiological signals from various body parts, such as the throat, nape, elbow, wrist, and knee, and successfully record sharp and repeatable signals generated by muscle contractions. In addition, the IFP−Multi devices demonstrate self‐powered handwriting sensing and moisture power generation for sweat‐sensing applications. As a proof‐of‐concept, a GPT 3.5 model‐based fine‐tuning and prediction pipeline that utilizes recorded physiological signals through IFP−Multi is showcased, enabling artificial intelligence with multimodal sensing capabilities for personalized healthcare management. This work presents a promising and ecofriendly approach to developing paper‐based electrochemical multimodal devices, paving the way for a new era of healthcare advancements. [ABSTRACT FROM AUTHOR]

Owing to their high porosity and tunability, porous solids such as metal–organic frameworks (MOFs), zeolites, or activated carbons (ACs) are of great interest in the fields of air purification, gas separation, and catalysis, among others. Nonetheless, these materials are usually synthetized as powders and need to be shaped in a more practical way that does not modify their intrinsic property (i.e., porosity). Elaborating porous, freestanding and flexible sheets is a relevant shaping strategy. However, when high loadings (>70 wt.%) are achieved the mechanical properties are challenged. A new straightforward and green method involving the combination softwood bleached kraft pulp fibers (S) and nano‐fibrillated cellulose (NFC) is reported, where S provides flexibility while NFC acts as a micro‐structuring and mechanical reinforcement agent to form high loadings porous solids paper sheets (>70 wt.%). The composite has unobstructed porosity and good mechanical strength. The sheets prepared with various fillers (MOFs, ACs, and zeolites) can be rolled, handled, and adapted to different uses, such as air purification. As an example of potential application, a MOF paper composite has been considered for the capture of polar volatile organic compounds exhibiting better performance than beads and granules. [ABSTRACT FROM AUTHOR]

This document provides abstracts of papers presented at the Society of Dairy Technology 80th Anniversary Conference, covering a range of topics in the dairy industry. One paper examines the impact of process conditions on water evaporation and energy usage in spray drying, while another explores the use of near-infrared spectroscopy to analyze the composition of raw milk. Other papers discuss the development of high-protein soft cheese alternatives, plant-based cheese analogues, and sustainable cleaning strategies in dairy facilities. The document also mentions a project focused on characterizing the milk metabolome and developing biomarkers for milk processability and methane production. Additionally, the document highlights a study that modified sediment quantification tests for dairy powders to improve image analysis capabilities, with promising results. Further research is planned to investigate the effects of robotic agitation and test additional powders. [Extracted from the article]

Background Methods Results Conclusions Shared reading is an important opportunity for parents and children to connect and learn, which can support later independent reading skills. Much of the research to date has examined shared reading as parents read physical print books with their children. This research has demonstrated that parents tend to engage in more activities that emphasise the meaning of the stories over the code (i.e., print). Here, we examine the focus of shared reading when parents are reading with their children on paper versus on a digital device and whether this differs across the preschool years.A total of 253 parents of children aged 0–5 years completed an online self‐report questionnaire. Parents reported on the frequency of engaging in meaning‐ versus code‐related activities during shared book reading on paper and on screen with their youngest child. We conducted a linear regression analysis contrasting code‐ versus meaning‐related activities on paper versus screen modality with age as a continuous variable.Key to our objectives, parents reported engaging in meaning‐related activities more frequently during shared reading on paper versus on screens and in code‐related activities more frequently during shared reading on screens than on paper. These effects did not differ across age, although overall, parents reported engaging slightly more frequently in shared reading activities in general when their child was older.The findings show that parents are engaging with their children differently as they read together on paper versus screens. Consistent with prior research, we found that activities emphasising the meaning of stories dominate shared paper book reading experiences in the preschool years. Critically shared reading on screens tips this balance, with parents reporting more code‐related activities. These patterns identify the learning opportunities enabled by the affordances of shared reading on screens. [ABSTRACT FROM AUTHOR]

This work demonstrates our effort to develop stimuli responsive cellulose films for the detection of dimethyl amines, a biogenic amine, released during food decomposition. Herein, we demonstrate that thin layer deposition of polydiacetylene‐zinc oxide nanosheets (PDA‐ZnO) on cellulose (CE) paper yields a stimuli responsive strip exhibiting strong thermochromism and solvatochromism against dimethyl amine. The incorporation of Zn nanoclusters within the composite plays an essential role in achieving reversible thermochromism while strong intermolecular interactions promote adsorption of PDA‐ZnO on cellulose paper. X‐ray diffraction and infrared spectroscopy reveal that the Zn2+ ions intercalate with PDA bilayer and strongly interact with the carboxylate headgroup of PDA. Furthermore, the reversible thermochromism persist when the nanosheets are deposited on cellulose (CE) paper when assembling PDA‐ZnO−CE paper. In addition, PDA‐ZnO−CE displayed selective solvatochromism allowing the utilization of the paper in the detection of dimethyl amine as it displayed a distinct and remarkable purple to orange colour transition. In particular, the response of the PDA‐ZnO−CE paper in several other organic solvents was poor as no transitions were observed hence its selectivity towards dimethylamine. In conclusion, the incorporation of PDA‐ZnO on cellulose paper is a step forward towards designing of a stimuli responsive packaging material that can detect biogenic amines released during food decomposition thereby preventing food poisoning. [ABSTRACT FROM AUTHOR]

Avoiding financial losses requires preventing catastrophic oil‐filled power transformer breakdowns. Continuous online transformer monitoring is needed. The authors use paper insulation to evaluate transformer health for continuous online transformer monitoring. The study suggests a new artificial intelligence method for estimating paper insulation residual life in oil‐immersed power transformers. The four artificial intelligence models use backpropagation‐based neural networks to predict paper insulation lifespan. Four primary transformer insulating paper failure indices—degree of polymerisation, 2‐furfuraldehyde, carbon monoxide, and carbon dioxide—form the basis of these models. Each model, including the backpropagation‐based neural networks, estimates paper insulation life using one failure index, along with moisture and temperature data. Optimisation techniques enhance hidden layer neurons and epoch count for improved performance. Results are validated against literature‐based life models, establishing a precise input–output correlation. This method accurately predicts the remaining useable life of power transformer paper insulation, enabling utilities to take proactive measures for safe and efficient transformer operation. [ABSTRACT FROM AUTHOR]

Efficient diagnosis of mycobacterial infections can effectively manage and prevent the transmission of infectious diseases. Unfortunately, existing diagnostic strategies are challenged by long assay times, high costs, and highly specialized expertise to distinguish between pulmonary tuberculosis (PTB) and nontuberculous mycobacterial pulmonary diseases (NTM‐PDs). Herein, in this study, an optimized 3D paper‐based analytical device (µPAD) is incorporated with a closed lateral flow (LF) strip into a loop‐mediated isothermal amplification (LAMP) device (3D‐µPAD‐LF‐LAMP) for rapid, low‐cost, and visual detection of pathogenic mycobacteria. The platform's microfluidic feature enhanced the nucleic acid amplification, thereby reducing the costs and time as compared to boiling, easyMAG, and QIAGEN techniques. Moreover, the LF unit is specifically designed to minimize aerosol contamination for a user‐friendly and visual readout. 3D‐µPAD‐LF‐LAMP is optimized and assessed using standard strains, demonstrating a limit of detection (LOD) down to 10 fg reaction−1. In a cohort of 815 patients, 3D‐µPAD‐LF‐LAMP displays significantly better sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and diagnostic accuracy than conventional bacterial culture and Xpert techniques. Collectively, 3D‐µPAD‐LF‐LAMP demonstrates enhanced accessibility, efficiency, and practicality for the diagnosis of multiple pathogenic mycobacteria, which can be applied across diverse clinical settings, thereby ultimately improving public health outcomes. [ABSTRACT FROM AUTHOR]

The acidic soils of western Newfoundland require liming for successful production of most crops. Locally sourced paper mill waste wood ash (WA) and paper sludge (SL) have potential as cheaper alternatives to limestone (LIME). Two greenhouse experiments evaluated WA and SL as liming and soil conditioning amendments for annual ryegrass (Lolium multiflorum) production. At 55 days after seeding, soil pH in WA (6.2 and 6.3) and wood ash and paper sludge (WASL) (6.0 and 6.3) were not different from that in LIME (6.0 and 6.5) for Experiments 1 and 2, respectively. However, pH in SL was 0.4 and 0.3 points lower than in LIME. Compared to LIME, WA, SL, and WASL produced 31%–52% and 57%–74% greater biomass yield in Experiments 1 and 2, respectively. N uptake was greater in WA (60 and 129 kg N ha−1) and WASL (51 and 97 kg N ha−1) compared to LIME (40 and 85 kg N ha−1), in Experiments 1 and 2, respectively. SL did not differ from LIME in Experiment 1, but reduced N uptake by 57% in Experiment 2. The results show significant potential of WA as an alternative amendment for liming and yield improvement of annual ryegrass grown in NL podzolic soils. However, SL has limited potential due to the risk of increasing N immobilization and residual soil mineral N when growing conditions are limiting. Combining SL with WA or biochar seemed to alleviate these risks. Overall, the adoption of these amendments for field production systems warrants serious consideration, following supplemental field studies to determine optimal application rates and timing. [ABSTRACT FROM AUTHOR]

Background: Hypertensive disorders of pregnancy (HDP) are a major cause of maternal morbidity and mortality, and their association with increased cardiovascular disease (CVD) risk represents a major public health concern. However, assessing CVD risk in women with a history of these conditions presents unique challenges, especially when studies are carried out using routinely collected data. Objectives: To summarise and describe key challenges related to the design and conduct of administrative studies assessing CVD risk in women with a history of HDP and provide concrete recommendations for addressing them in future research. Methods: This is a methodological guidance paper. Results: Several conceptual and methodological factors related to the data‐generating mechanism and study conceptualisation, design/data management and analysis, as well as the interpretation and reporting of study findings should be considered and addressed when designing and carrying out administrative studies on this topic. Researchers should develop an a priori conceptual framework within which the research question is articulated, important study variables are identified and their interrelationships are carefully considered. Conclusions: To advance our understanding of CVD risk in women with a history of HDP, future studies should carefully consider and address the conceptual and methodological considerations outlined in this guidance paper. In highlighting these challenges, and providing specific recommendations for how to address them, our goal is to improve the quality of research carried out on this topic. [ABSTRACT FROM AUTHOR]

Latent fingerprints were successfully visualized using fluorescence lifetime imaging (FLIM) on paper which emits strong fluorescence with a lifetime close to that of fingerprints and thus from which it is difficult for time‐resolved spectroscopy to visualize fingerprints. Latent fingerprint samples on paper were excited using a 450 nm or 532 nm nanosecond pulsed‐laser, and time‐resolved fluorescence images were obtained at a delay time of 6–16 ns in intervals of 1 ns, to the excitation pulse. The excitation beam was expanded using a lens, and the fluorescence from the fingerprints was captured using an intensified CCD camera. Because of the large fluorescence intensity of the background paper of approximately two to four orders of magnitude larger than that of the fingerprint, the fingerprint was not visualized on each fluorescence image by time‐resolved spectroscopy. However, the fingerprint was visualized in a FLIM image constructed using a series of the fluorescence images for the case with the fluorescence intensity of the background paper being four orders of magnitude larger than that of the fingerprint. The difference in fluorescence lifetime in the FLIM image of the visualized fingerprint and background paper was in the order of 0.1 ns, which was an order of magnitude smaller than the inherent fluorescence lifetime of a few nanoseconds for the fingerprints and paper. It was demonstrated that, at a background fluorescence intensity with a certain order of magnitude larger than that of fingerprints, FLIM has the potential to visualize latent fingerprints which cannot be visualized by time‐resolved spectroscopy. [ABSTRACT FROM AUTHOR]

Value co‐creation as a research topic has been a critical proposition of interest to a wide range of disciplines. In recent years, the field of cultural heritage has also developed a range of information practices to promote different forms of value co‐creation. While the body of literature has begun to accumulate, we still lack a comprehensive understanding of conceptual foundations and how value co‐creation is implemented in cultural heritage information practices. This paper conducted a hermeneutic literature review to understand and conceptualize the core aspects of value co‐creation in various cultural heritage information works. In particular, this paper provides a research mapping of the genres of co‐creation in cultural heritage information practices, the actors, and the roles played by the stakeholders. Further, this review provides an overview of the dominant value co‐creation models in the cultural heritage field. It distills the drivers of value co‐creation and the core value consequences that arise from a process perspective. Finally, this paper puts forward a thematic, theoretical, and methodological agenda for future work based on these findings. The review contributes to the literature by proposing an integrated conceptual framework that summarizes the core elements of value co‐creation in cultural heritage information practices. The framework also serves as a call for action, providing a general understanding of the conceptual foundation for future research. [ABSTRACT FROM AUTHOR]

Identifying factors that associate with more cited or higher quality research may be useful to improve science or to support research evaluation. This article reviews evidence for the existence of such factors in article text and metadata. It also reviews studies attempting to estimate article quality or predict long‐term citation counts using statistical regression or machine learning for journal articles or conference papers. Although the primary focus is on document‐level evidence, the related task of estimating the average quality scores of entire departments from bibliometric information is also considered. The review lists a huge range of factors that associate with higher quality or more cited research in some contexts (fields, years, journals) but the strength and direction of association often depends on the set of papers examined, with little systematic pattern and rarely any cause‐and‐effect evidence. The strongest patterns found include the near universal usefulness of journal citation rates, author numbers, reference properties, and international collaboration in predicting (or associating with) higher citation counts, and the greater usefulness of citation‐related information for predicting article quality in the medical, health and physical sciences than in engineering, social sciences, arts, and humanities. [ABSTRACT FROM AUTHOR]

Purpose: This paper outlines the theoretical and empirical basis for compassion focused therapy (CFT) for psychosis, the gaps in the current knowledge and research, as well as some of the challenges for addressing gaps. It will guide the direction of future work and the steps needed to develop and advance this approach. Method: This paper reviews evidence of how evolutionary models such as social rank theory and attachment theory have greatly contributed to our understanding of psychosis and provide a clear rationale and evidence base for the mechanisms of change in CFT for psychosis. It reviews the evidence for outcomes of compassion training more generally, and early feasibility evaluations of CFT for psychosis. Results: The process evidence shows that people with psychosis have highly active social rank and threat systems, and the benefits of switching into attachment and care systems, which can support emotion regulation and integrative mind states. The outcomes evidence shows that compassion training impacts not only psychological outcomes, but also physiological outcomes such as neural circuits, immune system, and the autonomic nervous system. Within the psychosis field, outcomes research is still in the early days, but there are good indications of feasibility and a clear path forward for the next steps. Conclusions: CFT for psychosis is an approach that integrates biopsychosocial processes, an integration that's evidenced across each aspect of the model, from theoretical foundations (evolution‐informed) to interventions (e.g., body/breath training and relational techniques), to evaluation. Future RCTs are required to understand the effects on biopsychosocial outcomes for people with psychosis. [ABSTRACT FROM AUTHOR]

Highlights This study investigated converting abundant paper mill waste, de‐inked paper sludge (DPS), into value‐added medium‐density fiberboard (MDF) panels. The objective was to repurpose this solid waste into a valuable material that aligns with the principles of a circular economy. Previous research has examined the addition of paper sludge to wood composites, but there is limited information on the specific incorporation of DPS into MDF production. This investigation offers new insights into this application. MDF panels were manufactured using hardwood fibers, with varying levels of urea‐formaldehyde resin (10% and 12% by weight) and different loadings of DPS (ranging from 0% to 50% by weight). X‐ray diffraction analysis revealed the presence of defective DPS fiber crystals. Contact angle measurements confirmed that DPS had poor wettability, corresponding to increased water absorption. As more DPS was incorporated, the mechanical properties of the panels progressively weakened due to defective fibers and poor adhesion between the fibers and the matrix. This was evident in scanning electron microscopy micrographs, which showed an escalation in interfacial flaws. Increasing the resin dosage noticeably improved the internal bond strength and reduced moisture uptake across all levels of DPS. However, at a DPS loading of 50%, the properties of the panels deteriorated by 36%–57% compared to the control MDF. Additionally, thickness swelling and water absorption increased significantly with higher DPS content, primarily due to the hydrophilic nature of the fibers. Based on optimization, it was determined that a DPS loading of 20% with a resin content of 12% provided the best balance between performance, waste utilization, cost, and moisture resistance. The reuse of abundant paper sludge supports the goals of a circular economy. However, strategies are required to tailor the processing methods and enable higher levels of recycled material without excessively compromising the key attributes of the product. Further research should focus on enhancing the quality of DPS and its compatibility with wood fibers and resin to enhance the performance of the composite material. DPS from recycled paper mill assessed for MDF production with wood fibers and resin Increasing DPS loading caused reductions in strength and adhesion of panels Water absorption and thickness swelling markedly rose with more DPS addition It was attributed to hydrophilic fibers and disrupted fiber‐matrix bonding Optimal formulation was 20% DPS loading and 12% resin content, balancing performance, waste utilization, and cost. [ABSTRACT FROM AUTHOR]

Despite the growing interest in incorporating response time data into item response models, there has been a lack of research investigating how the effect of speed on the probability of a correct response varies across different groups (e.g., experimental conditions) for various items (i.e., differential response time item analysis). Furthermore, previous research has shown a complex relationship between response time and accuracy, necessitating a functional analysis to understand the patterns that manifest from this relationship. In this study, response time data are incorporated into an item response model for two purposes: (a) to examine how individuals' speed within an experimental condition affects their response accuracy on an item, and (b) to detect the differences in individuals' speed between conditions in the presence of within‐condition effects. For these two purposes, by‐variable smooth functions are employed to model differential and functional response time effects by experimental condition for each item. This model is illustrated using an empirical data set to describe the effect of individuals' speed on their reading comprehension ability in two experimental conditions of reading medium (paper vs. digital) by item. A simulation study showed that the recovery of parameters and by‐variable smooth functions of response time was satisfactory, and that the type I error rate and power of the test for the by‐variable smooth function of response time were acceptable in conditions similar to the empirical data set. In addition, the proposed method correctly identified the range of response time where between‐condition differences in the effect of response time on the probability of a correct response were accurate. [ABSTRACT FROM AUTHOR]

Efficacious, effective and efficient communication between healthcare professionals (HCP) and patients is essential to achieve a successful therapeutic alliance. Telemedicine (TM) has been used for decades but during the COVID‐19 pandemic its use has become widespread. This position paper aims to describe the terminology and most important forms of TM among HCP and patients and review the existing studies on the uses of TM for asthma and allergy. Besides, the advantages and risks of TM are discussed, concluding that TM application reduces costs and time for both, HCP and patients, but cannot completely replace face‐to‐face visits for physical examinations and certain tests that are critical in asthma and allergy. From an ethical point of view, it is important to identify those involved in the TM process, ensure confidentiality and use communication channels that fully guarantee the security of the information. Unmet needs and directions for the future regarding implementation, data protection, privacy regulations, methodology and efficacy are described. [ABSTRACT FROM AUTHOR]

Genetic testing, including whole genome, whole exome, and other next‐generation sequencing technologies, has evolved vastly in the past decade. With this, the number of identified genes and genetic variants is constantly increasing. Although a variety of databases and online tools exist that summarize, categorize, and classify genes, a clear guideline of which information is needed when reporting a gene and what to do when identifying a new gene is lacking. This includes the correct nomenclature, descriptive information about genetic loci and genetic variation, aliases, and correlated phenotypes. This tutorial is meant to serve as an introduction to reporting genes in a paper and provides an overview of available databases and tools to obtain all necessary information on the genes of interest. [ABSTRACT FROM AUTHOR]

A variety of terms, such as "antiepileptic," "anticonvulsant," and "antiseizure" have been historically applied to medications for the treatment of seizure disorders. Terminology is important because using terms that do not accurately reflect the action of specific treatments may result in a misunderstanding of their effects and inappropriate use. The present International League Against Epilepsy (ILAE) position paper used a Delphi approach to develop recommendations on English‐language terminology applicable to pharmacological agents currently approved for treating seizure disorders. There was consensus that these medications should be collectively named "antiseizure medications". This term accurately reflects their primarily symptomatic effect against seizures and reduces the possibility of health care practitioners, patients, or caregivers having undue expectations or an incorrect understanding of the real action of these medications. The term "antiseizure" to describe these agents does not exclude the possibility of beneficial effects on the course of the disease and comorbidities that result from the downstream effects of seizures, whenever these beneficial effects can be explained solely by the suppression of seizure activity. It is acknowledged that other treatments, mostly under development, can exert direct favorable actions on the underlying disease or its progression, by having "antiepileptogenic" or "disease‐modifying" effects. A more‐refined terminology to describe precisely these actions needs to be developed. [ABSTRACT FROM AUTHOR]

In drug hypersensitivity, drug provocation testing (DPT), also called drug challenge, is the gold standard for investigation. In recent years, risk stratification has become an important tool for adjusting the diagnostic strategy to the perceived risk, whilst still maintaining a high level of safety for the patient. Skin tests are recommended before DPT but may be omitted in low‐risk patients. The task force suggests a strict definition of such low‐risk patients in children and adults. Based on experience and evidence from studies of allergy to beta‐lactam antibiotics, an algorithm on how to adjust DPT to the risk, and when to omit skin tests before DPT, is presented. For other antibiotics, non‐steroidal anti‐inflammatory drugs and other drugs, skin tests are poorly validated and DPT is frequently necessary. We recommend performing DPT with chemotherapeutics and biologicals to avoid unnecessary desensitization procedures and DPT with skin tests negative contrast media. We suggest DPT with anesthetics only in highly specialized centers. Specifics of DPT to proton pump inhibitors, anticonvulsants and corticosteroids are discussed. This position paper provides general recommendations and guidance on optimizing use of DPT, whilst balancing benefits with patient safety and optimizing the use of the limited available resources. [ABSTRACT FROM AUTHOR]

Proton pump inhibitors (PPIs) are invaluable therapeutic options in a variety of dyspeptic diseases. In addition to their well‐known risk profile, PPI consumption is related to food and environmental allergies, dysbiosis, osteoporosis, as well as immediate and delayed hypersensitivity reactions (HSRs). The latter, although a rare event, around 1%–3%, due to the extraordinarily high rate of prescription and consumption of PPIs are related to a substantial risk. In this Position Paper, we provide clinicians with practical evidence‐based recommendations for the diagnosis and management of HSRs to PPIs. Furthermore, the unmet needs proposed in the document aim to stimulate more in‐depth investigations in the topic. [ABSTRACT FROM AUTHOR]

Diagnosing immediate drug hypersensitivity reactions (IDHRs) can pose a significant challenge and there is an urgent need for safe and reliable tests. Evidence has emerged that the basophil activation test (BAT), an in vitro assay that mirrors the in vivo response, can be a complementary test for many drugs. In this position paper, members of Task Force (TF) "Basophil activation test in the evaluation of Drug Hypersensitivity Reactions" from the European Academy of Allergy and Clinical Immunology (EAACI) present the data from a survey about the use and utility of BAT in IDHRs in Europe. The survey results indicate that there is a great interest for using BAT especially for diagnosing IDHRs. However, there are still main needs, mainly in the standardization of the protocols. Subsequently consensus‐based recommendations were formulated for: (i) Technical aspects of BAT in IDHRs including type of sample, management of drugs, flow cytometry protocols, interpretation of the results; and (ii) Drug‐specific aspects that should be taken into account when performing BAT in relation to betalactams, neuromuscular blocking agents, fluoroquinolones, chlorhexidine, opioids, radio contrast media, chemotherapeutics, biological agents, nonsteroidal anti‐inflammatory drugs, COVID vaccine, and excipients. Moreover, aspects in the evaluation of pediatric population have also been considered. All this indicates that BAT offers the clinician and laboratory a complementary tool for a safe diagnostic for IDHRs, although its place in the diagnostic algorithm depends on the drug class and patient population (phenotype, geography, and age). The standardization of BAT is important for generalizing this method beyond the individual laboratory. [ABSTRACT FROM AUTHOR]

The gig economy and gig work have grown quickly in recent years and have drawn much attention from researchers in different fields. Because the platform mediated gig economy is a relatively new phenomenon, studies have produced a range of interesting findings; of interest here are the socio‐technical issues that this work has surfaced. This systematic literature review (SLR) provides a snapshot of a range of socio‐technical issues raised in the last 12 years of literature focused on the platform mediated gig economy. Based on a sample of 515 papers gathered from nine databases in multiple disciplines, 132 were coded that specifically studied the gig economy, gig work, and gig workers. Three main socio‐technical themes were identified: (1) the digital workplace, which includes information infrastructure and digital labor that are related to the nature of gig work and the user agency; (2) algorithmic management, which includes platform governance, performance management, information asymmetry, power asymmetry, and system manipulation, relying on a diverse set of technological tools including algorithms and big data analytics; (3) ethical design, as a relevant value set that gig workers expect from the platform, which includes trust, fairness, equality, privacy, and transparency. A social informatics perspective is used to rethink the relationship between gig workers and platforms, extract the socio‐technical issues noted in prior research, and discuss the underexplored aspects of the platform mediated gig economy. The results draw attention to understudied yet critically important socio‐technical issues in the gig economy that suggest short‐ and long‐term opportunities for future research directions. [ABSTRACT FROM AUTHOR]

While bibliographic classifications are traditionally based on disciplines, the logical alternative is phenomenon‐based classification. Although not prevalent, this approach has been explored in the 20th century by J.D. Brown, the Classification Research Group, and others. Its principles have been stated in the León Manifesto (2007) and are currently represented by such general schemes as the Basic Concepts Classification and the Integrative Levels Classification. A phenomenon‐based classification lists classes of phenomena, including things and processes irrespective of the discipline studying them (which can optionally be specified as an additional facet). Facets can work in a phenomenon‐based system much as in a disciplinary one. This kind of system will promote the identification of potential relationships between research in different disciplines, and will especially benefit interdisciplinary work. The paper reviews the theory, history, structure, advantages, applications, and evaluation of phenomenon‐based classification systems. [ABSTRACT FROM AUTHOR]

This paper analyses the conference papers published by double first‐class universities from mainland China between 2006 and 2019. The main findings are as follows: first, the number of conference papers from different double first‐class universities varied greatly, with the annual numbers of papers in the China Proceedings of Conferences Full‐text Database (CPCD) and in the Conference Proceedings Citation Index (CPCI) fluctuating during this period. Second, most of the top 10 disciplines of the papers in the CPCD and CPCI were in the natural sciences, with only two in the social sciences. The CPCD papers and CPCI papers had some overlap in their disciplinary distributions. Third, the CPCD and CPCI papers differed little in total number, with the number of CPCI papers being slightly higher than the number of CPCD papers. With the introduction of new regulations from the Ministry of Science and Technology (MST), there will likely be an increase in the number of Chinese‐language conference papers in the future. [ABSTRACT FROM AUTHOR]

Key points: Academia is already witnessing the abuse of authorship in papers with text generated by large language models (LLMs) such as ChatGPT.LLM‐generated text is testing the limits of publishing ethics as we traditionally know it.We alert the community to imminent risks of LLM technologies, like ChatGPT, for amplifying the predatory publishing 'industry'.The abuse of ChatGPT for the paper mill industry cannot be over‐emphasized.Detection of LLM‐generated text is the responsibility of editors and journals/publishers. [ABSTRACT FROM AUTHOR]

Electronic paper (e‐paper) is a reflective display technology with unique advantages, such as bistability, low‐power consumption, and high ambient contrast ratio. These features make e‐paper a promising candidate for future Internet of Things applications. Among different technologies of e‐paper, electrophoretic display (EPD) is the most successful one for commercialization. However, the edge ghosting (also known as the fringing effect) still limits the performance of EPD. Herein, we established a model of particle dynamics of electrophoresis, simulated the edge ghosting of microcapsule EPD, analyzed the edge ghosting effect, and revealed the relationship between thicknesses, dielectric constants of the back binder layer, and the edge ghosting. Two EPD panels with different thicknesses of back binder layer were demonstrated, which verifies the accuracy of this simulation model. With the proposed model, many device mechanisms and product issues can be analyzed and illustrated, which is supposed to guide the researchers in optimizing the device structure design of EPD. [ABSTRACT FROM AUTHOR]

Microfluidic based sensors are one of the emerging alternatives for bringing solutions studies on paper platforms. Microfluidic paper assisted platform was developed over here through a simple, easy, cost effective and instrument free process. The self‐same method of waxing through crayoning, was estimated thoroughly on different paper platforms. Varied parameter including type of crayoning, way of patterning, color effect, wicking rate and channel optimization was performed on paper milieus. Optimized time of baking for obtaining controlled penetration ranges from 2 min to 8 min depending on the type of paper used. Wax crayoning was preferred over oil pasteling for making hydrophobic barriers uniformly, solid as well fully penetrated within paper inner layers. Fabrication through this easy cost‐effective route allows a formation of hydrophilic reaction or sensing zone of 0.25 cm2 with sufficient reactive area. Further sensing of dopamine on paper platform was carried using paper chip adsorbed with fluorescent modified graphene quantum dots as sensing material. The patterned paper showed advantage as only few microliter (5 μl to 10 μl) range of sample volume was required for testing. Fluorescence quenching with increase of concentration was witnessed where around 25–75 μM dopamine concentration was positively tested through naked eye; which for the first time was demonstrated here via robust wax crayoning method for developing paper based biosensor. [ABSTRACT FROM AUTHOR]

Effective biodiversity protection is generally associated with a strict rule of law and democratic participation in environmental decision making. Norway's exceptional ranking in terms of governance, however, has failed to be a predictor of effective biodiversity protection. Through a systematic review of the main regulatory frameworks relevant to protecting biodiversity in Norway, this article analyses the misconceptions, perverse incentives and institutional bottlenecks that lie at the centre of the problem. The analysis finds three overarching barriers that regulatory frameworks have created to the effective protection and promotion of biodiversity in Norway, namely, a governance system based on diffuse legal obligations and responsibilities, excessive trust in private operators and considerable discretion to local entities. Accordingly, this article proposes three enabling factors, and related reform suggestions, for mitigating such barriers and domesticating earth system governance in biodiversity matters. [ABSTRACT FROM AUTHOR]

This article provides information on the diagnosis and management of smouldering myeloma, a precursor condition to multiple myeloma. It discusses various diagnostic tests and imaging techniques used to identify smouldering myeloma and emphasizes the importance of restaging if there is evidence of progression. The article also provides recommendations for screening and initial investigations for suspected myeloma. Additionally, it discusses risk stratification models and treatment options for smouldering myeloma, including the use of lenalidomide. The article concludes by highlighting ongoing clinical trials and the need for further research in the treatment of smouldering myeloma. [Extracted from the article]

This article summarizes several studies on various topics. The first study examines the relationship between internalizing symptoms and problematic pornography use in college students, finding that higher levels of internalizing symptoms are associated with higher levels of problematic pornography use. The second study focuses on sleep-wake disorders among veterans with opioid use disorder, revealing that 24.4% of veterans with opioid use disorder have a sleep disorder, with obstructive sleep apnea being the most common type. The third study explores the association between cannabis use and lifetime suicidal ideation and attempts, finding that cannabis use is associated with an increased risk of suicidal ideation and attempts. Another study examines the impact of mandatory buprenorphine training and the removal of the X-waiver on prescribing patterns for physicians, showing that while there was an increase in knowledge and a decrease in concern about legal consequences after training, there were no significant differences in buprenorphine prescribing patterns. The fifth study focuses on emergency department patients with illicit fentanyl use and co-occurring psychiatric disorders, highlighting the prevalence of illicit fentanyl use and the need for routine assessments and treatment for mental health and substance misuse in this population. Lastly, a study examines the burden of emergency admissions and hospitalizations for nonfatal acute iatrogenic events in people with sickle cell disease and opioid dependence or tolerance, emphasizing the need for improved interventions and better access to care for this population. The first article also highlights the need for further research to improve opioid treatment strategies and [Extracted from the article]

As the field of ophthalmology has evolved in the last several decades, so has the gender distribution of ophthalmologists. We conducted a narrative review to further characterise the status of women in the realm of publication, presentations, editorial positions, grants, academic promotion, and financial compensation. While the proportion of women publishing, presenting, and filling academic and editorial roles has increased over time, it still does not match that of men. Women are more likely to be first authors instead of senior authors, have lower average h‐indices, and are awarded fewer grants. The magnitude of some of these differences is smaller when adjusted for women's shorter career duration on average. Despite increased representation of women in ophthalmology, women continue to receive less compensation for the same work. This review highlights that more can be done to improve gender parity in ophthalmology. [ABSTRACT FROM AUTHOR]

Death is an inevitable part of life and highly relevant to information management: its approach often requires preparation, and its occurrence often demands a response. Many works in information science have acknowledged so much, and yet death is rarely a focused topic, appearing instead sporadically and disconnected across research. As a result there is no introduction to, overview of, or synthesis across studies on death and information. We therefore conducted an extensive literature search and reviewed nearly 300 scholarly publications at the intersection of death and information (and data) management. Covering seven topics in total, we review two groups of work directly engaging information management in relation to death (digital possessions, inheritance, and legacy; information behavior, needs, and practices around death), three engaging death and technology that require information and its management (death and the Internet, thanatosensitive design and technology‐augmented death practices, and the digital afterlife and digital immortality), and two reflecting the ethical and legal dimensions unique to death and information. We then integrate the collective findings to summarize the landscape of death‐related information research, outline remaining challenges for individuals, families, institutions, and society, and identify promising directions for future information science research. [ABSTRACT FROM AUTHOR]

Reviews have long been recognized as among the most important forms of scientific communication. The rapid growth of the primary literature has further increased the need for reviews to distill and interpret the literature. This review on Reviews and Reviewing: Approaches to Research Synthesis encompasses the evolution of the review literature, taxonomy of review literature, uses and users of reviews, the process of preparing reviews, assessment of review quality and impact, the impact of information technology on the preparation of reviews, and research opportunities for information science related to reviews and reviewing. In addition to providing a synthesis of prior research, this review seeks to identify gaps in the published research and to suggest possible future research directions. [ABSTRACT FROM AUTHOR]

Data culture/s as a research topic has begun to attract attention from a wide range of disciplines, albeit with inconsistent application of definitions, dimensions, and applications. This work builds on a call to investigate data culture/s within the information studies domain as a topic related to, but distinct from, information culture. The purpose of this study is to explore what is known about data culture/s in greater depth. We apply a retroductive approach to select and consider likely dimensions, inputs, and aspects of data culture/s in order to further map this construct to the literature, and thereby highlight gaps and opportunities to add to this body of knowledge. The initial candidate dimensions explored below include data‐related skills and attitudes, data sharing, data use/reuse, data ethics and governance, and a specific focus on Indigenous perspectives to provide insights on why and how a group may contest the emergent dominant discourse of data culture/s. Our conclusion highlights areas needing further research to fully define and examine the dimensions, inputs, and aspects of data culture/s, and calls for greater understanding and engagement with data culture/s from the information studies community. [ABSTRACT FROM AUTHOR]