Search

High entropy materials (HEM) have been attracting much attention as emerging catalysts for electrochemical water splitting. HEM catalysts have unique properties such as an interesting cocktail effect, broad design space, customizable electronic structure, and excellent entropy stabilization effect compared with single-digit catalysts. This paper provides a comprehensive overview of the use of HEM as a catalyst for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and water splitting. HEM design strategies including phase structure modulation, defect engineering, electrode configuration engineering, and computational aids are discussed to develop HEM catalysts with high performance and stability. In particular, the importance of density functional theory, high-throughput screening techniques, and machine learning for the discovery and design of HEM catalysts is emphasized. Finally, the challenges and imminent difficulties are prospected, and the corresponding strategies to deal with these challenges are put forward to promote the development of HEM catalysts in the field of electrochemical water splitting. [ABSTRACT FROM AUTHOR]

Developing high-efficiency electrocatalysts for the hydrogen evolution reaction (HER) is of great importance. In this paper, dendrite-free Ni–Cu catalysts were synthesised via one-step pulse electrodeposition under a weak magnetic field (0.5 T). Regardless of the direction of the magnetic field, the ions were affected by the magnetohydrodynamic (MHD) effect, which greatly promoted the mass transfer and dispersion uniformity, and suppressed the uncontrollable agglomeration by electrodeposition. It was found that the nucleation mechanism changed from progressive nucleation under a 0 T magnetic field to instantaneous nucleation under a 0.5 T magnetic field. Large-scale (325 nm, 0 T) dendrite growth on the single-sided plane was successfully suppressed, and replaced by smaller (90 nm, 0.5 T) and uniformly distributed cluster growth around the carbon paper. In addition, the (111) plane was strengthened by the magnetic field. Electrochemical analysis showed that the Ni–Cu catalysts exposed more surface area and exhibited greatly enhanced catalytic activity, which only needed −57.3 mV to deliver the current density of 10 mA cm−2 with a small Tafel slope of 99.4 mV dec−1 in 1 M KOH. Overall, magneto-electrodeposition, especially under weak magnetic field conditions, provides great promise for the preparation of HER catalysts. [ABSTRACT FROM AUTHOR]

Hydrogen (H2) is a new type of renewable energy that can meet people's growing energy needs and is environmentally friendly. In order to improve the industrial application prospects and electrochemical performance of hydrogen evolution catalysts, extensive research on transition metal materials has been carried out. Among the many catalytic materials, cobalt is an element with potential for the hydrogen evolution reaction (HER) due to its abundant reserves, low cost, and small energy barrier for H adsorption. This review classifies the latest research on cobalt-based catalysts according to the types of compound, including cobalt-based sulfides, phosphides, carbides, borides, oxides, etc., and summarizes the latest research progress of cobalt-based compound catalysts in acidic and alkaline media. Strategies to tune the properties of cobalt-based compound catalysts for high catalytic activity for HER are focused on, including structural engineering, defect engineering, and doping, etc. The advantages and limitations of each modified approach are reviewed. Not only that, but also the catalytic activity and advantages of the catalyst are evaluated by using density functional theory (DFT) calculation-related descriptors, activity evaluation parameters, etc. Finally, limitations and challenges of cobalt-based materials for HER are presented, as well as prospects for future research. This paper aims to understand the chemical and physical factors that affect cobalt-based catalysts, and to find directions for future research on cobalt-based catalysts. [ABSTRACT FROM AUTHOR]

The rational design of high-efficiency electrocatalysts for application in water oxidation in alkaline media remains a great challenge. In this paper, Ni3+-rich nanograss-like Mo-doped Ni3S2/NiS/VS arrays grown on nickel foam (denoted as Mo-NiVS@NF) have been successfully constructed through a hydro/solvothermal method. Interestingly, Mo-NiVS@NF exhibits superior catalytic OER performance, needing an overpotential of 217 mV to drive a current density of 10 mA cm−2, outperforming most previously reported NiS-based electrocatalysts. The result indicates that the Ni3+-rich active sites caused by the modulation of the electronic structure environment via the introduction of V and high-valency Mo play an important role in the high activity for the OER. Moreover, this catalyst shows high long-term electrochemical durability. [ABSTRACT FROM AUTHOR]

As a dual-functional catalyst for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), Ru clusters have great potential, but there are certain difficulties regarding their stability on the substrate and the tunability of their electronic environment. Here, the S doped graphited biochar aerogel electrocatalyst was designed and synthesized using terrestrial lignin and algal polysaccharide as a carbon substrate. The Ru clusters were anchored on the S-doped carbon aerogel (P-Ru/SC) by carefully designing the Ru-S bond via a novel plasma assisted high temperature carbonization treatment. The optimized P-Ru/SC-2 catalyst exhibits excellent electrocatalytic performance for the HER and OER, achieving ultra-small overpotentials of 119.6 mV and 193.4 mV at 10 mA cm-2. The dual-electrode requires only 1.47 V to reach 10 mA cm-2. It is worth noting that a large number of S sites on graphited carbon can strongly interact with the Ru clusters, significantly improving the catalytic activity and stability for the HER and OER. [ABSTRACT FROM AUTHOR]

We demonstrate a lamellar NiMoCo@CuS catalyst, showing not only an excellent catalyst performance (η100@72 mV and a Tafel slope of 47 mV dec−1), but also a good stability (20 mA cm−2@30 hours), outperforming the NiMo system and noble Pt. [ABSTRACT FROM AUTHOR]