Search

This paper investigates the influence of ZnCl 2 on the gamma attenuation and radiation shielding properties of tellurite glasses incorporating Bi 2 O 3 and B 2 O 3. Employing Geant4 simulation and XCOM program, the study explores the impact of varying ZnCl 2 content on different gamma attenuation parameters such as linear attenuation coefficient (μ), radiation protection efficiency (RPE), effective atomic number (Z eff), and HVL. Moreover, the relation between these factors and the density of the studied glass system is discussed in details. It is found that the incremental addition of Bi 2 O 3 significantly enhanced the photon attenuation properties of the tellurite glasses involved. The maximum Zeff values are observed at the low energy region between 0.015 and 0.1 MeV with the values of 53.016, 60.133, 65.950, 70.370, and 73.791 for the glass samples namely TBBZC1, TBBZC2, TBBZC3, TBBZC4, and TBBZC5, respectively. Furthermore, the HVL values fall between 0.0016 cm and 4.3546 cm indicates that the current glass system can be utilizes for gamma shielding applications. The results provide insights into the potential enhancement of radiation shielding efficiency in tellurite glasses, contributing valuable knowledge for the development of advanced materials in nuclear safety applications. • Radiation protection of TeO 2 –ZnCl 2 –B 2 O 3 –Bi 2 O glass system. • Significant influence of ZnCl 2 on the radiation shielding. • Monte Carlo simulations are employed. • A good agreement between the theory and the simulation. • TBBZC5 system has a potential use in nuclear and medical applications. [ABSTRACT FROM AUTHOR]

In this paper, the role of TeO 2 in radiation attenuating characteristics of xTeO 2 -10CaF 2 -(60–0.6x) B 2 O 3 -(30–0.4x) CaO glass system with x = 20, 25, 30, 35 and 40 wt% was investigated. The gamma radiation studies were carried out by utilizing Geant4 simulations and the newly developed Phy-X/PSD program. The gamma-shielding characteristics of the present glass samples were examined in terms of mass attenuation coefficient (μ/ρ), and some other related factors such as the effective atomic number (Z eff), and mean free path (MFP). The electron radiation-shielding characteristics were tested by determining the stopping power (ψ e) and CSDA range for each glass specimen. The neutron radiation-shielding characteristics were explored by evaluating the removal cross section (RCS) for the tested glasses. Moreover, the G-P method was employed to investigate the exposure buildup factor (EBF) for photon energies up to 15 MeV. The results showed that the TeO 2 content had a significant influence on the shielding ability of the investigated glasses against gamma and neutron radiations. In contrast, the TeO 2 content had an insignificant influence on the electron radiation-shielding capacity of the glasses involved. Additionally, the nuclear-shielding properties of the studied samples were compared with those of standard nuclear radiation shields. It can be concluded that the present calcium boro-tellurite glasses have a promising future to be used as a shielding material against gamma, electron and neutron radiation, wherein the TeO 2 concentration can be balanced according to the desired application. [ABSTRACT FROM AUTHOR]

In this research paper, we studied the optical and nuclear shielding efficiency of newly developed BGO glasses with the following compositions (in wt%): 32Bi 2 O 3 –68GeO 2 , 42Bi 2 O 3 –58GeO 2 , 47Bi 2 O 3 –53GeO 2 , 52Bi 2 O–48GeO 2 , 62Bi 2 O 3 –38GeO 2. BGO glasses were prepared by traditional melt quenching method. To obtain the band gap values of fabricated BGO glasses, optical absorption spectra were used for evaluation of optical properties. The mass attenuation coefficients (μ/ρ) were achieved for prepared glasses at 0.015–15 MeV photon energies employing MCNPX Monte Carlo code and WinXcom program. Moreover, broad-range of nuclear shielding parameters for gamma ray, neutrons and charged particles such as mass attenuation coefficient, half value layer, effective atomic number, buildup factors, mass stopping powers, projected ranges, fast neutron removal cross sections and damage factors were calculated. The refractive index is calculated from E opt , As Bi 2 O 3 concentration is enhanced, E opt is also increased as well as the optical electronegativity and consequently the refractive index. In addition, the results showed that BIGE5 glass sample with highest Bi 2 O 3 contribution has excellent nuclear radiation shielding ability among the other fabricated glass samples. [ABSTRACT FROM AUTHOR]

Four sulfide compounds' attenuation features of gamma-ray (Ag 2 ZnSnS 4 , Ag 2 ZnSnSe 4 , ZnS, and Ag 2 S) were described in this paper by a new software Phy-X/PSD. We calculated radiation attenuation parameters for the selected samples for a broad range of energies (0.015–15 MeV), including linear attenuation, the mean free path, the half-value layer, and total atomic and electronic cross-sections. The effective atomic number and the effective conductivity were also analyzed to investigate the radiation attenuation features. Also, the analyzed samples' buildup factors were studied. The samples' parameters were compared to materials frequently used to shield against radiation, including ferrite, chromite, barite, magnetite, and RS (253 G18, 360, 520) glass. Due to MFP and HVL values, Ag 2 S has better attenuation features than all the other samples utilized in the comparison. Fast neutron removal cross-sections (FNRCS) were also studied, and the best neutron attenuation composite among the samples under study, according to the FNRCS data, is Ag 2 S (0.116 cm−1). [ABSTRACT FROM AUTHOR]

This paper evaluates the γ-radiation shielding traits of some new types of borate glasses of composition (70–x)B 2 O 3 –10Bi 2 O 3 –10BaO–10CdO–xPbO (where 0 ≤ x ≤ 20 mol%) prepared using melt quenching method. As-quenched samples were characterized to determine the effects of various PbO contents on their γ-radiation shielding properties. XRD patterns of the samples verified their amorphous nature. The Phy-X and XCOM was used to compute the mass attenuation coefficients of the glasses and then compared with the experimental data. The γ-radiation shielding performance of the proposed glasses were evaluated in terms of diverse attenuation parameters like mean free path, half and tenth value layer, atomic cross-section, electronic cross-section, effective atomic number and effective electron density. The γ-radiation shielding performance of the glasses were significantly improved with the increase of PbO contents. This new borate glass system is established to be advantageous for the radiation shielding applications. • The borate glass samples with different PbO content were prepared by the standard melt-quenching method. • The μ/ρ values of the glasses were increased with the increase of the PbO content. • The relatively higher Zeff at lower energies due to the dominance of PE effect. • Promising HVT and TVL achieved with the new prepared glasses. • The proposed glass improves the efficiency of IR shielding material. [ABSTRACT FROM AUTHOR]

The paper describes the effect of high effective atomic number (Z eff) materials loading in polystyrene based thin-film Plastic Scintillators (PS). Thin plastic scintillator sheets have been loaded with high Z materials such as BaFBr:Eu, Gd 2 O 2 S:Tb, Gd 2 O 3 , BaF 2 , CeO 2 and Bi 2 O 3. Polystyrene based PS sheets of 250 ± 50 μ m thickness have been prepared by dissolving predetermined quantities of polystyrene, 2,5-Diphenyloxazole (PPO) and 1,4-bis(5-phenyl-2-oxazolyl) benzene (POPOP) in the p-xylene solvent. High Z eff material powders of 23 μ m size are mixed in the plastic scintillator solution and coated over the cellulose acetate-based transparency sheets. The dried films are peeled off, and their photoluminescence, radioluminescence, pulse height spectrum and response to alpha, beta, gamma and neutron radiations are studied by adopting suitable methods. The high Z eff materials for loading in PS are selected based on their physical properties like refractive index, bandgap, Z eff , Photoluminescence (PL) properties. While the composite scintillator loaded with 14.3 wt% of BaFBr:Eu2+ showed significant increase compare to other high Z materials. The loading concentration has been optimized as 14.3 wt% from the BaFBr:Eu2+ studies. Most of the composite scintillators showed improvement in radioluminescence and pulse height spectra for different radiations. • Polystyrene based thin plastic scintillator have been prepared by solvent-based fabrication method. • Thin composite plastic scintillator are studied with high Z eff material loading. • High Z eff material loaded composite scintillators showed enhanced response to radiation. • BaFBr:Eu loaded composite PS has shown the best promising result. [ABSTRACT FROM AUTHOR]

Polylactic acid (PLA) is a biodegradable organic acid of polymeric chain that has as chemical structure the monomer C 3 H 4 O 2 and it is one of the most used materials in rapid prototyping among 3D printers. Due to the ease of manufacturing PLA parts and because of its low atomic number, PLA can be used as holder to radiation source and detectors to establish fixed geometries in experiments using gamma radiation, hence the importance in knowing more about PLA characteristics. In this way, the novelty of this paper is to determine the mass attenuation coefficient of 3D printed PLA samples using gamma densitometry. A mathematical model was developed using MCNPX code and consisted of a PLA sample, a NaI(Tl) detector and gamma rays of 661.6 keV as radiation source (narrow beam). The mathematical model was experimentally validated using the same geometry and a lead collimator. Besides that, PLA weight fractions and density were also determined in order to use this information as input data in the MCNPX code. The obtained mass attenuation coefficients were in good agreement with the NIST theoretical reference value, presenting relative errors of 0.99% (MCNPX) and 2.00% (experimental). The proposed methodology was repeated replacing PLA for aluminum samples and comparing its results with NIST. In addition, the mass attenuation coefficient for some polymers was calculated using this model aiming to validate the geometry developed with MCNPX code. • Simulation of mass attenuation coefficients using MCNPX code. • Absorber material are 3D printed polylactic acid samples. • Experimental validation of the methodology using gamma densitometry. • Simulation of others absorber materials. [ABSTRACT FROM AUTHOR]

This paper focuses on the role of antimony oxide (up to 15 wt%) in the physical, structural, optical, and radiation attenuating characteristics of boro-bismuth glasses within B 2 O 3 -20Bi 2 O 3 - 20Na 2 O 2 - Sb 2 O 3 system. This glass system was prepared by melting at 1250°C and quenching into water. The physical properties were studied by measuring the density, molar volume, and x-ray diffraction for the prepared glass system. The structural features were investigated by determining packing density, passion ratio, oxygen packing density, and oxygen molar volume. The optical attributes were explored by evaluating bandgap, Urbach energy, refractive index, and other related parameters such as dielectric constant, reflection loss, molar polarizability, molar refractivity, optical dielectric constant, optical electronegativity, electron polarizability, optical basicity, metallization, and cut-off wavelength. On the other hand, the shielding properties of the prepared glasses were studied against different types of radiation such as gamma, electron, proton, and neutron beams. The radiation studies were carried out by utilizing Geant4 simulations and the newly developed Phy-X/PSD program. The radiation-shielding characteristics of the present samples were examined in terms of mass attenuation coefficient, stopping power, half value layer, removal cross section, mean free path, and effective atomic number of gamma, electron, and proton beams. The results showed that antimony oxide content had an important influence on the shielding ability against all of the types of radiations. Additionally, the obtained results were compared with those of standard radiation shields. It can be concluded that the present glasses have a promising future to be used as radiation shielding material, wherein the antimony oxide concentration can be balanced according to the desired application. [ABSTRACT FROM AUTHOR]

In this paper, we report the effective atomic number of some H, C, N and O based sugars and amino acids. These have been determined by using a handy expression which is based on the theoretical angle integrated small angle (coherent+incoherent) scattering cross sections of seven elements of Z ≤ 13 in four angular ranges of (0–4°), (0–6°), (0–8°) and (0–10°)for 241 Am (59.54 keV) and 137 Cs (661.6 keV) gamma rays. The theoretical scattering cross sections were computed by a suitable numerical integration of the atomic form factor and incoherent scattering function compilations of Hubbell et al. (1975) which make use of the non-relativistic Hartree–Fock (NRHF) model for the atomic charge distribution of the elements in the angular ranges of interest. The angle integrated small angle scattering cross sections of the H, C, N and O based sugars and amino acids measured by a new method reported recently by the authors were used in the handy expression to derive their effective atomic number. The results are compared with the other available data and discussed. Possible conclusions are drawn based on the present study. [ABSTRACT FROM AUTHOR]