Search

Enormous annual sewage sludge (SS) volumes pose global environmental challenges owing to contamination and significant greenhouse gas emissions. Here, we investigated the economic viability of co-pyrolyzing SS and biomass waste to produce biofuels (bio-oil and gas) and biochar. Net present worth (NPW) analysis, the sale product break-even price, and sludge handling price (SHP) were used to determine the profitability of co-pyrolysis compared with SS pyrolysis alone and conventional treatment methods. In this study, the sale prices of biochar based on quality (i.e., stability, carbon sequestration effectiveness, and heavy metal content) were estimated to be 2.24, 1.44, and 0.98 CAD/kg for high-, medium-, and low-grade biochar. The bio-oil prices, estimated based on the higher heating values of bio-oil and diesel, ranged from 0.80 to 1.22 CAD/kg. Sawdust (SD) and wheat straw (WS) were the chosen co-pyrolysis feedstocks, with four mixing ratios (20, 40, 60, and 80 wt%). Economically, SD (40 wt% mixing ratio) co-pyrolysis achieved the best performance, with a maximum NPW of 8.71 million CAD. SD single and co-pyrolysis were the only profitable scenarios. Moreover, SS single pyrolysis and WS co-pyrolysis exhibited higher profitability than conventional SS treatment methods, with SHPs of 65 and 40 CAD/1000 kg dry sludge, respectively. Sensitivity analysis highlighted the dependence of economic performance on biochar and bio-oil market value. This study offers the first economic analysis of this approach and enhances our understanding of the potential of co-pyrolysis for biofuel and biochar production, providing innovative solutions for the environmental challenges of SS disposal. [Display omitted] • Cost, operating expenses, and energy recovery of a pyrolysis plant were evaluated. • Co-pyrolyzing SS with sawdust SS showed the highest NPW of 8.71 million CAD. • All single and co-pyrolysis cases showed higher revenue than SS disposal methods. • Economic feasibility was dependent on bio-oil and biochar quality and sales price. [ABSTRACT FROM AUTHOR]

• Microalgal tolerate heavy through different heavy metal uptake strategies. • Role of different transporters in the uptake and detoxification of heavy metals. • Microalgae based strategies for bioremediation of specific heavy metals. • Microalgae show elevated biomass and lipid production under metal stress. The proficiency of microalgae to resist heavy metals has potential to be beneficial in resolving various environmental challenges. Global situations such as the need for cost-effective and ecological ways of remediation of contaminated water and for the development of bioenergy sources could employ microalgae. In a medium with the presence of heavy metals, microalgae utilize different mechanisms to uptake the metal and further detoxify it. Biosorption and the next process of bioaccumulation are two such major steps and they also include the assistance of different transporters at different stages of heavy metal tolerance. This capability has also proved to be efficient in eradicating many heavy metals like Chromium, Copper, Lead, Arsenic, Mercury, Nickel and Cadmium from the environment they are present in. This indicates the possibility of the application of microalgae as a biological way of remediating contaminated water. Heavy metal resistance quality also allows various microalgal species to contribute in the generation of biofuels like biodiesel and biohydrogen. Many research works have also explored the capacity of microalgae in nanotechnology for the formation of nanoparticles due to its relevant characteristics. Various studies have also revealed that biochar deduced from microalgae or a combination of biochar and microalgae can have wide applications specially in deprivation of heavy metals from an environment. This review focuses on the strategies adopted by microalgae, various transporters involved in the process of tolerating heavy metals and the applications where microalgae can participate owing to its ability to resist metals. [ABSTRACT FROM AUTHOR]

[Display omitted] • Application of Fe-impregnated bentonite as a catalyst in pyrolysis of grass cut. • CO 2 gas was employed as a pyrolysis gas medium. • Fe-impregnated bentonite enhanced syngas production. • Fe-impregnated bentonite induced formation of methyl 1,1-methyl-dodecanoate (C 14 H 28 O 2). • Obtained biochar had good As(V) adsorption capability. Fe-impregnated bentonite was employed in CO 2 -assisted pyrolysis of grass cut as a catalyst to improve syngas production, bio-oil quality, and biochar sorptive property. The gas analysis revealed that H 2 and CO production was enhanced by 332 and 7,110%, respectively, by applying Fe-impregnated bentonite in pyrolysis of grass cut while untreated bentonite had a limited influence on syngas production. Bio-oil produced from Fe-impregnated bentonite and grass cut (Fe-BG) had more homogenized chemical species in bio-oil as compared to that produced from pyrolysis of grass cut, and contained methyl 1,1-methyl-dodecanoate (C 14 H 28 O 2), one of the major components in biodiesel. The produced biochar had high surface area (69.2 m2 g−1) and possessed Fe0 and graphitic carbon structure, which was deemed to arise from reduction of Fe-oxides by syngas. Biochar also showed high As(V) adsorption capacity. The overall results of this work demonstrated the beneficial utility of Fe-impregnated bentonite in pyrolysis of biomass to improve syngas production as well as the quality of pyrogenic products. [ABSTRACT FROM AUTHOR]

Two different pathways for utilizing Miscanthus giganteus biochar were evaluated, namely, for the production of sustainable solid biofuels and as a precursor of high surface area activated carbons. Biochars were produced through a simple thermochemical conversion method via pyrolysis at 400, 500, 600, and 800 °C. The obtained biochars and raw biomass were characterized in detailed by proximate and ultimate analyses. The thermal behaviour and structural and strength properties were evaluated. The chemical composition (cellulose, hemicellulose, and lignin content) of raw Miscanthus giganteus was investigated. The biochars afforded a sufficient higher heating value (HHV) of up to 32 MJ kg−1. Activated carbon was obtained via chemical activation with KOH at 800 °C. The effect of the pyrolysis temperature on the surface properties of the activated carbons was investigated over a wide temperature range. The resulting activated carbons were characterised by N 2 adsorption–desorption at −196 °C and by determining the pH of aqueous extracts. As a potential application, the obtained activated carbon series was used for the adsorptive removal of isoproturon from aqueous media. The adsorption capacity was as high as 384 mg g−1 and depended on the pore size distribution of the activated carbons. The conducted study follows the current trend of search for novel energy sources and water purification. [Display omitted] • Miscanthus giganteus biochar was produced by pyrolysis at 400–800 °C. • Pyrolysis temperature affected properties of biochar and activated carbon. • The higher heating value of biochar pyrolysed at 600 °C was 32.8 MJ kg−1. • Biochar was used as precursor of activated carbon with high specific surface area. • Activated carbon efficiently adsorbed isoproturon from aqueous solution. [ABSTRACT FROM AUTHOR]

Renewable energy sources such as biomass have been proven to be one of the promising sustainable alternatives to fossil fuels. However, using biomass directly as a fuel is less attractive due to its high moisture content, poor grindability, low bulk density, and low energy density nature. Hence biomass can be converted into biochar to overcome these challenges. In this study, biochar was derived from citrus peels biomass by slow pyrolysis over the temperature range of 300–700 °C. The effect of pyrolysis temperature on the quality of citrus peels-derived biochar was examined based on the physical and chemical properties obtained from various analyses. The citrus peels biomass and biochar were characterized by means of higher heating value (HHV) analysis, field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDX), Fourier transform infrared ray (FTIR) analysis, proximate and thermogravimetric analysis. Based on the characterization results, the potential usage of the derived biochar as a solid fuel was discussed. Results obtained from the pyrolysis experiments indicated that a lower pyrolysis temperature produced a higher char yield. The carbon content and energy content of biochar were found to be increasing with pyrolysis temperature. Biochar produced at 500 °C presented the best fuel properties by having the highest value of HHV and carbon content. The results from this study provided great insights into biomass waste reutilisation to generate value-added biochar for renewable energy production in Malaysia. [Display omitted] • Promising potential for citrus peels biomass to biochar for energy conversion. • Higher heating value of citrus peels biochar comparable to sub-bituminous coal. • Carbon and energy content increased with increasing pyrolysis temperature. • Better combustion stability for biochar of higher pyrolysis temperature. [ABSTRACT FROM AUTHOR]

The continuous development of the economy and the constant improvement of living standards have stimulated the development of animal husbandry. This development has been accompanied by the massive production of animal manure with various bad odors and high heavy metal content, constituting severe damage to ecological security and human health. Traditional disposal methods, including composting and anaerobic digestion, are difficult to achieve satisfactory results due to long processing time, water and soil eutrophication, and toxic gas emissions. However, converting animal manure into bioenergy through pyrolysis is a clean, safe, and promising technique to reduce the amount of waste and produce valuable products. Co-pyrolysis with other materials can decrease the content of heavy metals in biochar and ameliorate the properties of products. The application of catalysts influences the pyrolysis process and product properties positively. The objective of this review is to analyze the properties of animal manure and discuss the recovery of biofuel from harmful animal manure by pyrolysis. A comprehensive analysis of animal manure pyrolysis and related product characteristics will provide a foundation for the sustainable management and scientific disposal of hazardous manure waste. [Display omitted] • Biochar is the primary product of conventional pyrolysis of animal manure. • High temperature enhances the immobilization of heavy metals in biochar. • Co-pyrolysis promotes the reduction of heavy metal content. • The addition of co-feedstock or catalyst influences product properties greatly. [ABSTRACT FROM AUTHOR]

The Antarctic krill, referring to Euphausia superba , feeds phytoplankton, grown up with photosynthesis for CO 2 fixation. Therefore, the use of krill as a raw feedstock for energy production is a highly carbon negative approach, not disturbing the food supply chain of human. Although the krill has high lipid content (up to 40 wt%, dry basis), its use as a raw feedstock for biodiesel production has not been considered. In this study, the feasibility of Euphausia superba to be used as a biodiesel feedstock was scrutinized. Prior to biodiesel production, an annual biodiesel production potential from the krill without disruption of ecosystems was estimated (129% larger than current biodiesel production in Korea). Because krill oil contains high fraction impurities, (trans)esterification with acid catalyst resulted in low yield of biodiesel (6.5 wt%), while non-catalytic transesterification achieved 94.7 wt% of biodiesel yield. To maximize the utilization of krill, solid residue obtained after biodiesel production was synthesized to krill biochars, and they were used as sorptive materials for adsorption of toxic chemicals. Among different model pollutants (Cd(II), Cr(VI), and methylene blue), krill biochar had the best adsorption capacity for Cd(II) (13.7 mg g−1), which is comparable value with other studies. [Display omitted] Biodiesel production from transesterification of lipid in krill and conversion of krill solid residue into biochar, available for adsorption of environmental pollutants. [ABSTRACT FROM AUTHOR]