Search

The Renovation Wave for Europe highlighted the role of the public building stock for which Directive 2012/27/EU has set an annual renewal rate of 3%, which should rise to reach the goal of decarbonization by 2050. In this paper, the energy retrofit of an educational building—at the academic level—in Southern Italy was investigated. The aim was to evaluate the incentive share, which could accelerate the energy efficiency process, to achieve a cost-effective nZEB. The results show that the highest incentive rate is required for interventions on the opaque building envelope, which are also those that allow the least energy savings. An incentive rate of about 45% for the energy efficiency of the transparent envelope is necessary to reduce the payback time by about 7 years. The efficiency of the plants and the installation of a PV system are energetically and economically convenient even without forms of economic incentive. Finally, if the building is brought to high energy standards—a primary energy saving of 46% and energy class A3—an incentive rate of 40% is required to repay the intervention in about 10 years. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative method for making cement-based composites from corn straw plants, and investigates the strength, thermal conductivity, and hydration characteristics of the composites. Corn straw is a natural, renewable, and breathable thermal insulation composite that contains cellular sealed pores. Corn straw contains a large amount of soluble cellulosic sugar, which hinders the hydration reaction of Portland cement and affects the use of corn straw as a building material. In this study, a 3 wt.% siliceous solution was used for surface treatment of corn straw particles to prevent cellulosic sugar from affecting the hydration performance of Portland cement. The composition of added cement-based composite materials with treated corn straw at the dosage of 11–20 wt.% was investigated. The test results showed that the corn straw cement-based composite (CSCC) had an optimal thermal conductivity of 0.102–0.112 (W/(m·K)) and a minimum compressive strength of above 1 MPa. The hydration performance of four typical CSCCs was examined using XRD, SEM, and EDS. The experimental results of this study may help to increase the comprehensive utilization of corn straw. The manufacturing method of the composite materials is simple, effective, and convenient for popularization and application, and it provides a new important technical measure to solve the problem of high energy consumption in rural houses. [ABSTRACT FROM AUTHOR]

A large amount of the Iranian energy demand is related to the building sector, mainly due to its obsolescence. In this paper, a second-skin system has been implemented as a retrofit action for an office building, evaluating the effect of a tensile material as second-skin in terms of primary energy saving, carbon dioxide equivalent emissions, and simple payback period. The analysis was carried out through numerical simulations across a whole year and for four Iranian cities (Tabriz, Teheran, Yazd, and Bandar Abbas) in four different climates (cold, temperate, hot-dry, and hot-wet), and with the building aligned at either north-south or east-west. Moreover, an economic analysis was carried out suggesting different incentive policies to promote building energy refurbishment. The simulation results highlighted a favorable orientation for buildings in Iran, suggesting a guideline for new constructions. Indeed, the best results were achieved for an east-west orientation of the building (up to a primary energy saving of 13.6% and reduction of carbon dioxide equivalent emissions of 45.5 MgCO2,eq, in Yazd), with a decrease of the annual specific total (cooling and thermal) energy demand of 37.9 kWh/m2/year. The simple payback period values were also lower in the east-west orientation than the north-south one. [ABSTRACT FROM AUTHOR]