Search

The selector activated sludge (SAS) systems are known to prevent excessive growth of filamentous microorganisms responsible for bulking sludge, but these systems were hardly ever modelled. This study aimed to develop a model capable of predicting rapid substrate removal in the SAS systems. For this purpose, the Activated Sludge Model No. 3 (ASM3) was extended with three processes (adsorption, direct growth on the adsorbed substrate under aerobic or anosic conditions). The modified ASM3 was tested against the results of batch experiments with the biomass originating from two full-scale SAS systems in Germany. The endogenous biomass was mixed with various readily biodegradable substrates (acetate, peptone, glucose and wastewater) and the utilisation of substrate (expresses as COD) and oxygen uptake rates (OURs) were measured during the experiments. In general, model predictions fitted to the experimental data, but a considerable number of kinetic (5) and stoichiometric (2) parameters needed to be adjusted during model calibration. The simulation results revealed that storage was generally a dominating process compared to direct growth in terms of the adsorbed substrate utilisation. The contribution of storage ranged from 65-71% (Plant A) and 69-92% (Plant B). [ABSTRACT FROM AUTHOR]

Biomass combined heat and power plants (CHPPs) can operate target-specifically because of their controllability while supporting decarbonization in district heating. The transition from the German Renewable Energies Act funding, which has promoted biomass CHPPs but is now about to expire, to direct marketing, is a major economic challenge for many biomass-heating grids. To successfully accomplish it, the flexible operation of biomass CHPPs, compared to the previous baseline-operation, is becoming an increasingly important requirement if participation in the electricity markets is to remain profitable. This paper presents a techno-economic assessment of flexible CHPP operation in a modeled district heating system with a CHPP, a peak load boiler and a thermal heat storage. The simulation model compares two cases - a natural gas and a wood-chip gasifier CHPP. The analysis of the results investigates the parameters that need to be adapted to make biomass-fired CHPP heating grids more efficient compared to fossil-fired CHPP heating grids in a flexible operating scenario. It highlights the technical and economic superiority of a fossil-fired CHPP in flexible operation in comparison to the wood gasifier system. The introduction of a CO 2 -tax on natural gas as a fuel, currently under discussion in Germany, would increase the competitiveness of the wood gasifier. • Simulation model of a district heating system. • Model units are wood or natural CHP plant, peakload boiler and heat storage. • Three scenarios for CHP plant dispatch under consideration of electricity prices. • Focus on dynamic differences of the CHP plant operation strategy. • Results show limitations in operational flexibility of the wood gas CHP plant. [ABSTRACT FROM AUTHOR]