Search

Lamb wave resonators (LWRs) exhibiting high-quality factors and clean spectra demonstrate promising applications in RF communication and sensing. This paper discusses the relationship between the spurious mode, the quality factor, and the effective electromechanical coupling factor of resonators. When the resonant frequency of the spurious mode is slightly below the parallel resonant frequency (fp), the quality factor at fp (Qp) decreases dramatically. To enhance Qp and suppress the spurious mode, the LWRs with busbars including only the top electrode (non-overlap busbars) and the LWRs with busbars incorporating both top and bottom electrodes (overlap busbars) are designed and fabricated. The LWR with 12 μm-wide overlap busbars exhibits a notable enhancement in Qp, elevating it from 553.76 to 1488.17 and suppresses the spurious mode simultaneously. This research introduces a promising approach to suppress the spurious mode and enhance the quality factor of Lamb wave resonators, thereby holding great potential for applications in sensors and mobile communication. [ABSTRACT FROM AUTHOR]

Shear mode‐guided ultrasonic waves are highly regarded for submerged or subterranean structural health monitoring (SHM), owing to their non‐dispersive feature and minimized acoustic energy loss when in contact with liquid or solid. High‐performance shear mode ceramic ultrasonic transducers with robustness and cost‐effectiveness are highly demanded for underwater or underground SHM applications, especially in harsh environments. However, the implementation of discrete shear mode piezoelectric ceramic ultrasonic transducers is hindered by the inconsistency with manual installation, lack of conformability on curved surfaces, and unreliable acoustic coupling between the transducers and the structure. Here, direct‐write conformable shear mode ultrasonic transducers made from piezoelectric lead‐free ceramic coatings, which are in situ produced on steel structures by a scalable thermal spray process, are proposed. The obtained lead‐free lithium‐doped potassium sodium niobate (KNN‐LN) ceramic coatings exhibit a high effective shear piezoelectric strain coefficient (d24, f) above 60 pm V−1 in a broad frequency range from 100 Hz to 200 kHz. The resulting conformable shear mode KNN‐LN ceramic coating transducers successfully showcase the functions of exciting and detecting stable shear mode ultrasonic wave signals with operation temperature exceeding 200 °C and demonstrate reliable capability in defect detection in both air and liquid environments. [ABSTRACT FROM AUTHOR]

The first asymmetric mode (A1 mode) lamb wave resonator (LWR) with a resonant frequency of 6 GHz based on Z-cut lithium niobate (LN) films is presented. An asymmetric electrode structure with different-sized electrode pads in the center and edged regions has been proposed, which can be used to optimize the distribution of the electric field and decrease acoustic impedance mismatch to improve the target mode. Experiment results reveal that LWRs with an asymmetric electrode structure can successfully enhance the A1 mode, achieving a high effective electromechanical coefficient ( k eff 2 ) of 26%, a quality factor (Q) of 1123, and an excellent figure-of-merit (FOM = k eff 2 ∙ Q) of 262. It demonstrates that asymmetric electrode structure provides a new way to suppress the spurious modes for LWRs and shows a great application prospect in wide-bandwidth and low-loss filters used in the sub-6 G frequency range. [ABSTRACT FROM AUTHOR]