Search

[Display omitted] • We studied the effects of moisture content, slope angle, and clay contents on mass failure. • A self-designed hollow model was used. • Indoor hollow-flume experiments were conducted under the condition of surface runoff. • Soils with 5%, 7.5%, and 10% initial water content generate fatal mass failure. • Soil mass failure occurs when critical water and clay contents are reached. Soil mass failure disasters are among the most destructive disasters in mountainous areas worldwide, and they continue to receive significant attention in the literature. However, factors that influence soil mass failure in hollows have not been explored via experimental approaches. In this study, we conducted a series of indoor hollow–flume experiments to exhibit how the three factors, namely, initial moisture content, slope angle, and clay content, influence the collapse of soil mass under surface runoff conditions. Our findings revealed that the major processes causing soil mass failure were internal seepage erosion resulting from subsurface runoff, migration of fine particles, development of tension cracks, increase in pore water pressure, and decrease in cohesion. Fluctuations in pore water pressure were characterized by two main trends: (1) an abrupt rise under static liquefaction and (2) a decrease before failure due to dilatancy. The time required for soil mass failure first decreased and then increased with the increase in moisture content. The soil mass with an initial moisture content of ∼12.5% was more critical to the failure. In addition, the time required for soil mass failure decreased with increasing slope angle, revealing a slope angle of 40° to be more prone to failure. The buildup of pore water pressure was found to increase with clay content; soil with a clay content of ∼7.5% required the shortest amount of time to initiate slides. Thus, our results provide a thorough insight into the processes and factors involved in the initiation and development of soil mass failure in hollow areas, which can be used by public agencies to improve monitoring, early warning, and forecasting systems. Notably, our study can help identify risk-prone source areas, and sensors can be installed to monitor potential mass failure locations. [ABSTRACT FROM AUTHOR]

The evolution of sliding zone soil originating from a muddy interlayer in the Three Gorges Reservoir (TGR) in China is accompanied by an increase in clay content, and the subsequent changes in its mechanical properties control the initiation or reactivation of large-scale bedrock landslides. In this paper, using sliding zone soil samples from the Xingfusi landslide in the Wanzhou area, two groups of remolded saturated specimens were prepared with clay contents of 25.0% and 12.5%. Direct shear creep tests and a series of ring shear tests were carried out to investigate the shear behaviors of the specimens with different clay contents. On this basis, the effect of clay content on the evolution of landslides was discussed. The results show that (1) during the long-term creep process before landslide initiation, the shear creep modulus of sliding zone soil in steady creep state significantly decreases with an increase in clay content, which results in the increase in cumulative creep displacement. (2) The increase in clay content in sliding zone soil will lead to a reduction in peak shear strength and residual frictional resistance. In the drained shearing on saturated sliding zone soil with a high clay content, the excess pore-water pressure on the sliding surface cannot dissipate as rapidly due to the small permeability of sliding zone soil with a high clay content, which may favor postfailure movement. (3) With an increase in shear displacement rate, the residual strength first shows a weak "negative shear rate effect" and then shows a significant "positive shear rate effect". However, with an increase in clay content, the initial shear rate for the residual strength showing a "positive rate effect" will decrease. (4) Sliding zone soil with a high clay content generally does not exhibit strength recovery, while sliding zone soil with a low clay content clearly recovers its peak residual strength due to volume change of the shear zone caused by secondary compression after a long period of reconsolidation. In this case, a greater external load or reduction in effective normal stress needs to be applied to reactivate the landslide. • An increase in clay content of sliding zone soil results in the increase in cumulative creep displacement. • High clay content decreases the initial shear rate for the residual strength showing a "positive rate effect". • The effect of clay content on the strength recovery of sliding zone soil was revealed. • The effect of clay content on the whole evolution of landslides was explained. [ABSTRACT FROM AUTHOR]