Search

The building sector greatly contributes to energy consumption and Greenhouse Gas emissions, relating to the whole building life cycle. Boasting a huge building heritage of historical and architectural value, Europe faces challenging retrofit perspectives, as the potential for high energy efficiency has to be exploited while preserving the buildings' original characteristics. The present work aims to feature the influence of a passive strategy on a heritage building in a mild climate. As historical its façade cannot be modified, its large glazing areas involve multiple issues, such as an increase in the heating ( Q H) and cooling ( Q C ) energy demands and the risk of thermal discomfort. Thus, window replacement was proposed for retrofitting. A dynamic simulation model in TRNSYS was validated with experimental data collected by the continuous monitoring of walls of different thicknesses and orientations. Solutions from replacement with Double Glazing Units (DGUs) with improved thermal insulation, to internal shading activation were applied. All configurations were compared in terms of Q H , Q C , thermal performance of the building and user comfort (Fanger). Low-e DGU enabled the saving of up to 14% of the annual energy demand, and shading also offered good results in summer, reducing Q C by 19%. In summer, DGU involved a maximum PPD reduction of 10 units. [ABSTRACT FROM AUTHOR]

The concept of segmented AC power systems interconnected by means of HVDC is becoming more and more significant for many cases worldwide. Such systems already exist and will become more complex with the increasing emergence of HVDC links and grids. The concept of a grid composed of multiple subgrids motivates the need to define the governing roles of Interconnecting Power Converters (IPC) which connect the different subgrids. Such IPC can have various operation modes which are presented and analyzed in this paper. In addition, the principles of operation needed for each individual subgrid and for the overall system are introduced and discussed. The resulting fundamental equations are outlined and combined in a power flow formulation of the overall system. A simple case study is presented to illustrate the power flow formulation in a grid of multiple subgrids, also introducing example dynamic simulations of transitions between different operating points. [ABSTRACT FROM AUTHOR]

• An innovative slim decentralised plug-and-play tank is proposed for DHW production. • Model calibration is performed by experimental data in charge/discharge process. • Retrofit solution cuts required annual energy in half of which 82% is RES quota. • Optimised charging scheme reduces the total annual electrical energy by 5.2 %. • A degree increment in draw-off temperature increases annual CO 2 emission by 103 kg. The present study deals with a multi-objective analysis of an innovative decentralised system to produce and store domestic hot water (DHW), emphasising on the combined effects of the technological aspect, control strategy and user's behaviour. The proposed system, by relying on thermal energy storage, decouples energy production and demand while shaves peaks in the energy demand and, at the same time, provides more autonomy to users through local storages. To identify subtle interactions in components of DHW system, dynamic simulations are carried out by establishing a coupled TRNSYS-MATLAB code, calibrated and validated by experimental measurements. The energy analysis implies that the proposed system cuts the required annual electrical energy in half, of which up to 82% of needed primary energy is supplied from renewable sources, compared to previous electrical-decentralised system. The optimisation of the results through applying control strategies indicates that adopting a three-time charging scheme is advantageous in terms of providing a more stable temperature profile as well as a higher hot water temperature. Compared to an available-by-demand operation, this scheme reduces the required total annual electricity by 5.2 % and enhances total thermal loss from components up to 4.0%. Furthermore, a sensitivity analysis on the results emphasises the striking role of the user behaviour in electrical energy consumption either via draw-off temperature or adjusting the pre-defined temperature for activation of the built-in auxiliary heater. [ABSTRACT FROM AUTHOR]

• Existing approaches to EPCs in Europe reviewed. • Limitations to current and future applications highlighted. • New forms of modelling for future EPCs documented. • A framework of criteria for evaluating new assessment approaches proposed. As our need for energy information of buildings evolves, and the tools and methods at our disposal increase in scale and complexity, it is perhaps reasonable to expect a similar level of change in the way energy in buildings is assessed within national energy compliance frameworks. By comparing the available opportunities for building energy modelling with the current methodologies underlying Energy Performance Certificates, this study proposes future directions for standardised energy assessment of residential buildings and the impact this could have on different facets of energy policy. In carrying out this exercise, a number of criteria are proposed that could be used to appraise methodologies that align with future requirements of energy assessment, with two potential candidates for future energy assessment considered as part of this appraisal. An argument is thus proposed for better aligning future forms of standardised energy assessment with directions and requirements of future low-carbon energy policy. [ABSTRACT FROM AUTHOR]