Search

Exploitation of hydrogen as an energy carrier requires the development of systems for its storage and delivery. Formic acid has been proposed as valuable hydrogen carrier compound, due to its relatively high hydrogen content (53 g L−1), the latter being easily and cleanly released in catalytic reactions under mild conditions (HCOOH → H2+ CO2). Ionic liquids are interesting solvents for homogeneous catalyzed formic acid decomposition systems as their extremely low volatility avoids solvent contamination of the produced hydrogen stream. In this paper an outstandingly simple, robust and active catalyst system is presented, namely RuCl3dissolved in 1-ethyl-2,3-dimethylimidazolium acetate (RuCl3/[EMMIM][OAc]). This system proved to be fully recyclable over 10 times. Turnover frequencies (TOF) of 150 h−1and 850 h−1were obtained at 80 °C and 120 °C, respectively. [ABSTRACT FROM AUTHOR]

Both softwood (southern yellow pine) and hardwood (red oak) can be completely dissolved in the ionic liquid 1-ethyl-3-methylimidazolium acetate ([C2mim]OAc) after mild grinding. Complete dissolution was achieved by heating the sample in an oil bath, although wood dissolution can be accelerated by microwave pulses or ultrasound irradiation. It has been shown that [C2mim]OAc is a better solvent for wood than 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) and that variables such as type of wood, initial wood load, particle size, etc.affect dissolution and dissolution rates; for example, red oak dissolves better and faster than southern yellow pine. Carbohydrate-free lignin and cellulose-rich materials can be obtained by using the proper reconstitution solvents (e.g., acetone/water 1 : 1 v/v) and approximately 26.1% and 34.9% reductions of lignin content in the reconstituted cellulose-rich materials (from pine and oak, respectively) have been achieved in one dissolution/reconstitution cycle. The regenerated cellulose-rich materials and lignin fractions were characterized and compared with the original wood samples and biopolymer standards. For pine, 59% of the holocellulose (i.e., the sum of cellulose and hemicellulose) in the original wood can be recovered in the cellulose-rich reconstituted material; whereas 31% and 38% of the original lignin is recovered, respectively, as carbohydrate-free lignin and as carbohydrate-bonded lignin in the cellulose-rich material. [ABSTRACT FROM AUTHOR]