Search

Composites are pivotal in Europe's evolving packaging sector, which is undergoing changes due to circular and bioeconomy initiatives, which prioritize eco‐friendly packaging. Despite paper's high recycling rates, dynamic markets challenge recycling and circularity. Innovative paper‐based composites demand flexible recyclability assessments, which impacts product development. Recyclability methods are evolving as they struggle to match the dynamic changes occurring in the packaging sector. This article outlines paper recycling and compares global lab recyclability evaluation methods. [ABSTRACT FROM AUTHOR]

Direct air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC. [ABSTRACT FROM AUTHOR]

Highlights As is well known, Laser print paper is usually produced with high‐quality chemical wood pulp. The laser print waste paper fiber (LPWF) is a high‐quality secondary fiber, and the research and development of high‐value utilization technology for laser print waste paper has attracted much attention in the field of renewable resource recycling. In this study, LPWF was used to reinforce poly(lactic acid) (PLA) composites in the field, and the composites were modified with bioenzyme, cationic polyacrylamide (CPAM), and nano‐silicon carbide (Nano‐SiC) to enhance the interfacial compatibility of LPWF/PLA composites. The study systematically investigated the effects of various modification methods on the characteristics and degradability of composites made from laser print waste paper fiber reinforced PLA resin matrix. The results showed that the mechanical properties of the composites treated with CPAM and Nano‐SiC were significantly improved, with tensile strengths of 54.3 and 59.5 MPa, and flexural strengths of 85.1 and 91.5 MPa, respectively, and the water absorption of the composites was reduced after the modification treatment, while the thermal stability was improved. The degradation performance of the composites in various water environments indicated that the inclusion of LPWF accelerated the water degradation rate of the composites, with the maximum degradation rate of the composite reaching 1.26% in 30 days. Laser print waste paper is an excellent quality recyclable fiber resource. Four modifiers were used to modify LPWF/PLA composites. Characteristics and degradability of the composites were investigated. Significantly improved properties of CPAM and Nano‐SiC modified composites. The degradation rate of composites is increased by the addition of LPWF. [ABSTRACT FROM AUTHOR]

Polyethylene terephthalate (PET) is a conventional packaging material. Its modification has attracted immense attention in the industry and academia. Here, office waste paper, white cardboard waste, and waste corrugated paper were first employed as raw materials for cellulose nanocrystal (CNC) extraction by acid hydrolysis. Thereafter, CNC/PET composite films with various CNC additions were prepared via a self‐assembly technique. The results revealed that the CNCs formed a self‐assembled film on the PET surface via the synergistic effect of the complex interactions among the CNCs as well as between the CNCs and PET. Moreover, the CNCs improved the barrier property of PET and decreased the oxygen and water vapor transmittances of CNC/PET by 30.7% and 21.7%, respectively. Additionally, the coating of the PET surface with 0.2 wt.% CNCs extracted from the waste paper decreased the surface wettability of PET, exhibiting application potentials in the hydrophobic modification of polymers. This study realized waste paper recycling and provided a basis for constructing self‐assembled functional films on PET surfaces. The findings and insights of this study could exhibit application potentials in the fields of waste recycling and packaging materials. Highlights: A functional cellulose nanocrystal (CNC) film is prepared from waste paper.Self‐assembled CNC is coated on a PET surface to form a CNC/PET composite film.The synergistic interactions among CNCs and between CNC and PET modified PET.The low addition of CNCs realized the efficiency modification of PET.The study achieves waste paper recycling and high‐value utilization. [ABSTRACT FROM AUTHOR]

Nanocellulose extraction from lignocellulosic materials is a highly chemical and energy‐intensive process as it requires the removal of lignin and hemicellulose. Writing paper is one of the processed materials that could be used as a raw material for the extraction of nanocellulose. In this work, cellulose nanofibers (CNFs) were synthesized from paper waste using TEMPO‐oxidation followed by high‐shear microfluidization. Scanning electron microscopy and atomic force microscopy confirmed the diameter of fibers in the nano‐range and a consistent zeta potential confirmed the stability of CNF suspension in water over a long time frame. Characterization of the CNFs using Fourier transform infrared spectroscopy indicated the presence of a carbonyl group due to the oxidation process. Thermogravimetric analysis and x‐ray diffraction revealed lower thermal stability and reduction in the crystallinity index of CNFs, as compared to pulp fibers. The obtained CNFs were used successfully as the sole binding agent in the preparation of fiberboards and also utilized as a reinforcing agent for polyvinyl acetate (PVAc) adhesive in the preparation of laminated veneer lumber (LVLs). The addition of CNFs in PVAc improved the glue shear strength indicating superior bonding characteristics and also increased the water resistance of the LVLs. Highlights: This work focused on cellulose nanofibers (CNFs) extraction from waste paperObtained CNFs form stable water suspension and have a diameter of less than 15 nmThermal stability and crystallinity index reduced after conversion to nanofibersCNFs form a complex network and act as a sole binder to make fiberboardsCNFs were utilized as a reinforcing agent for PVAc in preparation of LVLs [ABSTRACT FROM AUTHOR]

This research unveils a transformative methodology for fabricating flexible printed circuit boards (PCBs), focusing on the unique attributes of filter paper substrates. A meticulous parametric exploration scrutinizes critical aspects such as buckling resistance, charging current, plating time, and electrode configurations for copper electroplating. Key findings highlight the exceptional stability of copper electroplating on filter paper, exhibiting robust resistance against environmental variations and bending angles spanning +180° to −180°. Utilizing higher pencil grade material and maintaining a minimum 4 cm distance with a voltage range of 3 to 1.44 V ensures uniform, controlled plating without burning, optimizing the electrode area below 1 cm2 for enhanced practicality. The research underscores the longevity and durability of copper‐plated filter paper, with negligible resistance changes even after 1000 folds. Over a year, the shelf‐life assessment emphasizes the excellent stability of electroplated filter paper. Practical applications, including fully functional circuits and a bio‐degradable piano, underscore the versatility and real‐world feasibility of the proposed electroplating technique. [ABSTRACT FROM AUTHOR]

This study investigated converting abundant paper mill waste, de‐inked paper sludge (DPS), into value‐added medium‐density fiberboard (MDF) panels. The objective was to repurpose this solid waste into a valuable material that aligns with the principles of a circular economy. Previous research has examined the addition of paper sludge to wood composites, but there is limited information on the specific incorporation of DPS into MDF production. This investigation offers new insights into this application. MDF panels were manufactured using hardwood fibers, with varying levels of urea‐formaldehyde resin (10% and 12% by weight) and different loadings of DPS (ranging from 0% to 50% by weight). X‐ray diffraction analysis revealed the presence of defective DPS fiber crystals. Contact angle measurements confirmed that DPS had poor wettability, corresponding to increased water absorption. As more DPS was incorporated, the mechanical properties of the panels progressively weakened due to defective fibers and poor adhesion between the fibers and the matrix. This was evident in scanning electron microscopy micrographs, which showed an escalation in interfacial flaws. Increasing the resin dosage noticeably improved the internal bond strength and reduced moisture uptake across all levels of DPS. However, at a DPS loading of 50%, the properties of the panels deteriorated by 36%–57% compared to the control MDF. Additionally, thickness swelling and water absorption increased significantly with higher DPS content, primarily due to the hydrophilic nature of the fibers. Based on optimization, it was determined that a DPS loading of 20% with a resin content of 12% provided the best balance between performance, waste utilization, cost, and moisture resistance. The reuse of abundant paper sludge supports the goals of a circular economy. However, strategies are required to tailor the processing methods and enable higher levels of recycled material without excessively compromising the key attributes of the product. Further research should focus on enhancing the quality of DPS and its compatibility with wood fibers and resin to enhance the performance of the composite material. Highlights: DPS from recycled paper mill assessed for MDF production with wood fibers and resinIncreasing DPS loading caused reductions in strength and adhesion of panelsWater absorption and thickness swelling markedly rose with more DPS additionIt was attributed to hydrophilic fibers and disrupted fiber‐matrix bondingOptimal formulation was 20% DPS loading and 12% resin content, balancing performance, waste utilization, and cost. [ABSTRACT FROM AUTHOR]

Paper manufacturers have long used silicone as the coating agent for release liners. However, silicone‐based release paper is very difficult to recycle due to covalent bonds between silicone and fibers. The most suitable solution to overcome this problem is to use alternative coating materials with adequate release properties, provided that they can be easily repulped in typical paper recycling facilities. We proposed a coating agent composed of phosphate esters and dimethylacetamide in order to manufacture a recyclable and efficient release paper. Analyses carried out on coated sheets showed that phosphate esters allowed the formation of a surface with adequate release properties (low peeling force and surface free energy). In addition, the residual adhesion values obtained with phosphate esters confirmed that they are well anchored on the backing paper surface, thus limiting the mass transfer to the adhesive tape. [ABSTRACT FROM AUTHOR]

Objectives: Endoscopic ultrasound‐guided tissue acquisition (EUS‐TA) is used for pathological diagnosis and obtaining samples for molecular testing, facilitating the initiation of targeted therapies in patients with pancreatic cancer. However, samples obtained via EUS‐TA are often insufficient, requiring more efforts to improve sampling adequacy for molecular testing. Therefore, this study investigated the use of oil blotting paper for formalin fixation of samples obtained via EUS‐TA. Methods: This prospective study enrolled 42 patients who underwent EUS‐TA for pancreatic cancer between September 2020 and February 2022 at the Osaka International Cancer Institute. After a portion of each sample obtained via EUS‐TA was separated for routine histological evaluation, the residual samples were divided into filter paper and oil blotting paper groups for analysis. Accordingly, filter paper and oil blotting paper were used for the formalin fixation process. The total tissue, nuclear, and cytoplasm areas of each sample were quantitatively evaluated using virtual slides, and the specimen volume and histological diagnosis of each sample were evaluated by an expert pathologist. Results: All cases were cytologically diagnosed as adenocarcinoma. The area ratios of the total tissue, nuclear, and cytoplasmic portions were significantly larger in the oil blotting paper group than in the filter paper group. The frequency of cases with large amount of tumor cells was significantly higher in the oil blotting paper group (33.3%) than in the filter paper group (11.9%) (p = 0.035). Conclusions: Oil blotting paper can increase the sample volume obtained via EUS‐TA on glass slides and improve sampling adequacy for molecular testing. [ABSTRACT FROM AUTHOR]

This document is an editorial from the journal "Quality & Reliability Engineering International" discussing advanced reliability and safety methodologies and their applications in modern engineering systems. The editorial highlights the need for innovative solutions in reliability and safety, and showcases original research presented at the 2023 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering. The research papers cover topics such as reliability modeling and analysis, reliability-based design and optimization, failure/safety analysis and prevention, and maintainability. The editorial expresses gratitude to the journal, editors, staff, reviewers, and authors for their contributions to the special issue. [Extracted from the article]

Despite the growing interest in incorporating response time data into item response models, there has been a lack of research investigating how the effect of speed on the probability of a correct response varies across different groups (e.g., experimental conditions) for various items (i.e., differential response time item analysis). Furthermore, previous research has shown a complex relationship between response time and accuracy, necessitating a functional analysis to understand the patterns that manifest from this relationship. In this study, response time data are incorporated into an item response model for two purposes: (a) to examine how individuals' speed within an experimental condition affects their response accuracy on an item, and (b) to detect the differences in individuals' speed between conditions in the presence of within‐condition effects. For these two purposes, by‐variable smooth functions are employed to model differential and functional response time effects by experimental condition for each item. This model is illustrated using an empirical data set to describe the effect of individuals' speed on their reading comprehension ability in two experimental conditions of reading medium (paper vs. digital) by item. A simulation study showed that the recovery of parameters and by‐variable smooth functions of response time was satisfactory, and that the type I error rate and power of the test for the by‐variable smooth function of response time were acceptable in conditions similar to the empirical data set. In addition, the proposed method correctly identified the range of response time where between‐condition differences in the effect of response time on the probability of a correct response were accurate. [ABSTRACT FROM AUTHOR]

In the realm of food waste recycling, industrial suberoligneous by‐products like cork and peels, pose a challenge for value‐added conversion, primarily due to their intricate structures. This study introduces an innovative approach by utilizing recycled cork as a prime example of repurposing food waste to create a reusable and durable packaging paper. Notably, the manufacturing process of this cork‐based paper avoids the generation of waste liquids from lignin removal, effectively alleviating concerns related to liquid waste pollution. The resulting packaging paper demonstrates remarkable printability, readability, and erasability while offering reusability. Its performance can be fine‐tuned through pH value adjustments. Moreover, this packaging paper exhibits outstanding antioxidative properties and barrier properties, seamlessly integrating superb UV‐blocking proficiency and heightened visible transparency, rendering it highly appealing for sustainable food packaging applications. [ABSTRACT FROM AUTHOR]

This technical note describes in detail a method for associating individual sheets of blank A4 white paper from the same ream by the physical fit of machine‐cut edges. A large‐scale laboratory trial involving ~700 sheets of paper from 24 different reams (plus one spoiled sample), and more than 20,000 potential physical fits, correctly associated and sequenced 219 pairs of sheets together with a 100% empirical success rate and no false associations. The edge profile of each short machine‐cut end of a sheet of A4 paper allows us to physically fit sheets of paper from the same ream to each other and use this to predict the sequence of sheets in a set of documents. In a real‐life scenario, it may now be possible to detect the substitution or addition of a sheet in a multipage document, link documents from different sources to each other or to a common source of paper (e.g. to paper from a seized printer or from an accused's address) or to date documents. The study provides data for the application of this method in forensic casework and supports the practitioner when forming conclusions in this type of case. [ABSTRACT FROM AUTHOR]

Aims: Information on breastfeeding and safety of biologics in infants is lacking due to difficulties in case collection. We evaluated methods for determining the concentration of biologics in breast milk using a dry filter method that can simplify the collection, storage and transport of breast milk. Methods: To generate dried filter paper (DFP) samples, approximately 30 μL of breast milk was placed onto a Whatman 903 card and punched out. After extraction, the supernatant was measured using an enzyme‐linked immunosorbent assay. Three concentrations of each drug were prepared in liquid breast milk (LBM) and DFP samples to determine their stability up to 28 days after storage at 2–8°C or −20°C for LBM and 25 ± 5°C for DFP. LBM and DFP samples were also provided by nursing mothers using biologics during lactation, and drug concentrations in both samples were compared. The agreement between the two measurement methods was confirmed by Bland–Altman analysis. Results: Breast milk was provided by 12 mothers who used biologics (tocilizumab, abatacept, etanercept, golimumab, sarilumab and belimumab). The coefficients of variation for within‐run and between‐run precision for the six drugs were within 15% for both LBM and DFP, and accuracy was within 90%–110% of the quality controls. After 28 days, concentrations remained at more than 90%. The difference between the values obtained by each method was within the acceptable range of error (−12.1 to +16.6 ng/mL). Conclusions: A method for determining the concentration of biologics using DFP is expected to help improve pharmacotherapy for lactating women. [ABSTRACT FROM AUTHOR]

Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial‐catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces‐based technologies for use in the textile and pulp‐milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment. [ABSTRACT FROM AUTHOR]

This study explored using ultrafiltration (UF) membranes to treat pulp and paper mill wastewater, implementing a novel Taguchi experimental design to optimize operating conditions for pollutant removal and minimal membrane fouling. Researchers examined four factors: pH, temperature, transmembrane pressure, and volume reduction factor (VRF), each at three levels. Optimal conditions (pH 10, 25°C, 6 bar, VRF 3) led to a 35% reduction in flux due to fouling and high pollutant rejections: total hardness (83%), sulfate (97%), spectral absorption coefficient (SAC254) (95%), and chemical oxygen demand (COD) (89%). Conductivity had a lower rejection rate of 50%. Advanced imaging techniques like atomic force microscopy (AFM) and scanning electron microscopy (SEM) revealed reduced membrane fouling under these conditions. The Taguchi method effectively identified optimal conditions, significantly improving wastewater treatment efficiency and promoting environmental sustainability in the pulp and paper industry. Practitioner Points: This study optimized UF membrane conditions for pulp and paper mill wastewater, reducing fouling and enhancing pollutant removal, offering practical strategies for industrial treatment.AFM and SEM provided key insights into membrane fouling and mitigation, promoting real‐time diagnosis and optimization for enhanced treatment efficiency.Prioritizing anaerobic fixed‐bed systems in wastewater treatment is beneficial for achieving high COD removal efficiency. Optimizing hydraulic retention time (HRT) in these systems can further improve their overall effectiveness and sustainability. [ABSTRACT FROM AUTHOR]

The growing demands of sustainable, portable, and wearable electronics pose new demands on miniaturized energy storage devices that can be integrated on flexible substrates such as paper. Microsupercapacitors (MSCs), especially MXene‐based pseudocapacitive MSCs with fast charging/discharging rate, high power density, and long cycle life, are competitive candidates as power supply for emerging flexible and wearable on‐paper electronics. However, few studies have reported MXene‐based on‐paper MSCs to simultaneously attain ultrahigh‐rate (>1000 mV s−1) capability and large areal capacitance >10 mF cm−2. Herein, ultrafast metal‐free on‐paper MSCs are fabricated through leveraging the synergistic effect of conductive PEDOT:PSS and capacitive MXene (Ti2C) to achieve a remarkable areal capacitance of 30 mF cm−2 and long lifetime (>96% capacitance retention after 10 000 cycles) at an ultrahigh scan rate of 1000 mV s−1, outperforming most of the present on‐paper or MXene‐containing MSCs. Moreover, the printed on‐paper metal‐free MSC arrays attain extended working voltage window of up to 6 V and outstanding capacitive performance at an ultrahigh scan rate of 10 V s−1. The on‐paper PEDOT:PSS‐Ti2C composite MSCs offer new opportunities as eco‐friendly microscale power sources for emerging paper‐based portable and wearable electronics. [ABSTRACT FROM AUTHOR]

With the development of wearable electronic technology, the flexible photodetectors have attracted widespread attention, and it is of great significance to develop flexible, eco‐friendly and low‐cost photodetectors. Cellulose paper, as a flexible, eco‐friendly, low‐cost, lightweight, customizable, biodegradable and renewable material, has received enthusiastic attention and rapid development in the field of photodetectors in recent years. In this review, it is focused on the research progress of paper‐based (PB) photodetectors. First, the fabrication methods of PB photodetectors are discussed, including electrode materials and optoelectronic functional materials. Then, this review systematically summarizes and analyzes the achievements of PB photodetectors on photoelectric performances (spectral response range, responsivity, detectivity, response/recovery times and on/off ratio) and flexibility characteristics (bending angle and bending cycle). In terms of key performance indicators, the PB photodetectors reported so far can detect multiple wavelengths of light from UV to near‐infrared with the maximum detectivity of 1013 Jones. In addition, the various applications of PB photodetectors is reviewed and discussed. Finally, it is look forward to the future development of PB photodetectors in terms of fabrication methods, photoelectric and flexible performances, and applications. With this review, it is hope that it will promoted the future development of PB photodetectors. [ABSTRACT FROM AUTHOR]

Carbon paper is commonly used for catalytic electrode preparation because of its high conductivity, corrosion resistance, and stability. However, traditional electrode preparation methods are inappropriate for highly hydrophobic carbon paper. In this paper, a high‐activity carbon paper catalytic electrode was prepared using multistrategies cold plasma modification to create atomic structural defects, dope N and Cu elements, and introduce oxygen‐containing functional groups. Analyses show that the bombardment of high‐energy particles caused atomic structural defects. Nitrogen and copper entered the carbon paper through plasma‐induced chemical recombination and physical adsorption, reaching 5.26% and 3.83%, respectively. Ethanol‐based plasma introduced oxygen‐containing functional groups to improve hydrophilicity. Finally, the plasma‐prepared electrode exhibited a reduction efficiency of 87.69% in an electrocatalytic nitrate reduction reaction. [ABSTRACT FROM AUTHOR]

Industrial waste locks are used as raw materials to reduce harmful effects on the environment and improve environmental performance. Marble clay powder can be used as a filling aid and can fill voids in concrete structures. This article will show you how to use a maximum natural sand alternative in concrete with marble powder and quarry dust. The challenge of the 21st century is to change to a new form that can support the natural system. This necessitates a radical rethinking of how to give the community infrastructure and housing. Making a concerted effort to develop novel, innovative, and alternative construction materials may be necessary. Jungles of concrete around cause's impact on the Environment and it would result in climate change. Mankind must avoid the use of things that are detrimental to the environment. So in this paper, it is decided to address the issue by adopting the use of the green concrete concept which is environmentally friendly. Green concrete is concrete made up using industrial wastes such as marble powder, quarry dust, wood ash, paper pulp, etc. Green concrete, which is capable of sustainable development, helps to reduce the consumption of natural resources, energy use, and environmental pollution. Green concrete is more cost‐effective than ordinary concrete and reduces the cost of resultant concrete by 14%–20%. It is also observed that the alkali‐aggregate reaction and sulfate attack resistance of concrete are both significantly improved. Green concrete is a useful tool for lowering environmental pollution and enhancing concrete's resistance to harsh conditions. All stages of infrastructure construction and rehabilitation will follow this trend of using new cement and techniques. Green concrete's adaptability and its performance derivatives will meet a variety of future needs. [ABSTRACT FROM AUTHOR]

This study aims to comprehensively examine the influence of three distinct additives, namely carboxymethyl cellulose (CMC), hydroxypropyl methylcellulose (HPMC), and cellulose nanofibers (CNF), on the performance enhancement of corrugated base paper. For this purpose, steam‐exploded rice straw was treated with varying concentrations (2, 4, 6, 8, and 10 wt%) of CMC, HPMC and CNF. Analysis of the rice straw pre and post expansion, as well as the modified corrugated base paper, was conducted using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TG), tensile performance testing, and scanning electron microscopy (SEM). Results indicated that adding CMC, CNF, and HPMC to corrugated base paper significantly improved bonding between paper layers, particularly at 2 %, 6 %, and 8 % concentrations, respectively. This enhancement notably increased tensile strength and elastic modulus of the corrugated base paper. Tensile performance saw increases of 57.76 %, 59.01 %, and 60.25 %, while elastic modulus showed increments of 52.7 %, 9.4 %, and 136.69 %, respectively. These findings provide valuable insights for the preparation of corrugated base paper and highlight the potential of CMC, HPMC, and CNF in enhancing paper mechanical properties. [ABSTRACT FROM AUTHOR]

Laser‐induced graphene (LIG) technology has provided a new manufacturing strategy for the rapid and scalable assembling of triboelectric nanogenerators (TENG). However, current LIG‐based TENG commonly rely on polymer films, e.g., polyimide (PI) as both friction material and carbon precursor of electrodes, which limit the structural diversity and performance escalation due to its incapability of folding and creasing. Using specialized PI paper composed of randomly distributed PI fibers to substantially enhance its foldability, this work creates a new type of TENG, which are structurally foldable and stackable, and performance tailorable. First, by systematically investigating the laser power‐regulated performance of single‐unit TENG, the open‐circuit voltage can be effectively improved. By further exploiting the folding process, multiple TENG units can be assembled together to form multi‐layered structures to continuously expand the open‐circuit voltage from 5.3 to 34.4 V cm−2, as the increase of friction units from 1 to 16. Last, by fully utilizing the unique structure and performance, representative energy‐harvesting and smart‐sensing applications are demonstrated, including a smart shoe to recognize running motions and power LEDs, a smart leaf to power a thermometer by wind, a matrix sensor to recognize writing trajectories, as well as a smart glove to recognize different objects. [ABSTRACT FROM AUTHOR]

This article explains the broader stakes of contemporary British gambling reform debates, via an analysis of the White Paper High Stakes: Gambling Reform for the Digital Age (2023). I lay out the context to the White Paper, and I summarise its main proposals, focusing especially on efforts to reduce the harms caused by gambling. I also offer a critical analysis of one particularly significant and contentious proposed reform: mandated affordability checks for online gambling, when losses reach certain thresholds. I suggest that these checks reflect and deepen a shared regulatory, industry, and academic faith in online gambling technologies to resolve social responsibility problems, with wider implications for consumer surveillance and public health. [ABSTRACT FROM AUTHOR]

Objective: This paper aims to describe the 2023 update position paper on MRONJ developed by the Italian Societies of Oral Pathology and Medicine (SIPMO) and of Maxillofacial Surgery (SICMF). Methods: This is the second update following the 2013 and 2020 Italian position papers by the Expert panel, which is a representation of the two scientific societies (SIPMO and SICMF). The paper is based on an extensive analysis of the available literature from January 2003 to February 2020, and the subsequent review of literature conducted between March 2020 and December 2022 to include all new relevant published papers to confirm or modify the previous set of recommendations. Results: This position paper highlights the main issues of MRONJ on risk estimates, disease definition, diagnostic pathway, individual risk assessment, and the fundamental role of imaging in the diagnosis, classification, and management of MRONJ. Conclusion: The Expert Panel confirmed the MRONJ definition, the diagnostic work‐up, the clinical‐radiological staging system and the prophylactic drug holiday, as recognized by SIPMO‐SICMF; while, it presented novel indications regarding the categories at risk of MRONJ, the prevention strategies, and the treatment strategies associated with the therapeutic drug holiday. [ABSTRACT FROM AUTHOR]

To provide a dynamic perspective on the evolution of Mendeley readership, this study conducts an 8‐year longitudinal analysis of approximately 3.4 million scholarly papers published in 2015. Mendeley readership data were collected annually from 2016 to 2023 for the sampled papers to analyze the temporal accumulation patterns of readership following publication. The results indicate that Mendeley readership exhibits a speed advantage compared to citations and a prevalence advantage compared to Twitter mentions, demonstrating both initial prevalence and sustained growth on a yearly basis. However, the patterns of accumulation vary across disciplines, with papers in Biomedical and Health Sciences showing the fastest accrual of extensive Mendeley readership data. Leveraging demographic data provided by Mendeley, this study further investigates how different user groups—categorized by academic status, disciplinary affiliation, and geographic location—engage with papers across various disciplines. The findings highlight Mendeley readership as a rapid and substantial altmetric, yet they also emphasize the need to interpret the nature of the attention captured by Mendeley readership with caution, considering its potential biases introduced by the varying engagement levels of different user groups across disciplines. [ABSTRACT FROM AUTHOR]

The design of high‐performance electrode material without compromising energy and power density is critical for the advancement in hybrid electric vehicle technology. In this perspective, we have fabricated a MnO2 loaded activated charcoal‐based electrode on graphite paper as an endeavour to improve the energy storage capabilities. The electrode material is synthesized by employing a sustainable route and the structural, microstructural, and textural properties have been investigated. The electrochemical performance for energy storage is evaluated and the fabricated electrode on graphite paper exhibits remarkably high‐power density (811 W kg−1) maintaining high energy density (106 Wh kg−1) at the same time, along with high gravimetric specific capacitance value of 768 F g−1 at 2 mA cm−2. The obtained results demonstrate the excellent performance of the electrode material, suggesting MnO2 loaded activated charcoal as a prospective electrode material to meet the demand of hybrid electric vehicles as well as to contribute to our transitioning towards low‐to‐zero carbon emission technology. [ABSTRACT FROM AUTHOR]

In this study, a redox reaction is employed to synthesize manganese oxide (Mn3O4) nanoparticles using potassium permanganate as a precursor in the presence of diethyl amine. The structural characterization reveals the formation of the tetragonal phase of Mn3O4 nanoparticles with a space group of I41/amd. A free‐standing Mn3O4‐based paper electrode is fabricated and its electrochemical performances are investigated. The electrode exhibits a maximum specific capacitance value of ~353 F g−1 and an areal capacitance of ~530 mF cm−2 at a current density of 0.2 A g−1. A symmetric supercapacitor‐based device is also designed using Mn3O4 nanoparticles as an active material in a gel electrolyte configuration. The Mn3O4 device achieves specific and areal capacity values of ~208 mAh g−1 and 260 mA cm−2, respectively, at a current density of 0.3 A g−1. The device delivers maximum energy and power density values of ~104 Wh kg−1 and ~220 W kg−1, respectively, with ~92 % specific capacity retention at 0.3 A g−1 after 5000 cycles. The above results suggest that the Mn3O4‐based device has the potential for energy storage applications. [ABSTRACT FROM AUTHOR]

Background: Shared reading is an important opportunity for parents and children to connect and learn, which can support later independent reading skills. Much of the research to date has examined shared reading as parents read physical print books with their children. This research has demonstrated that parents tend to engage in more activities that emphasise the meaning of the stories over the code (i.e., print). Here, we examine the focus of shared reading when parents are reading with their children on paper versus on a digital device and whether this differs across the preschool years. Methods: A total of 253 parents of children aged 0–5 years completed an online self‐report questionnaire. Parents reported on the frequency of engaging in meaning‐ versus code‐related activities during shared book reading on paper and on screen with their youngest child. We conducted a linear regression analysis contrasting code‐ versus meaning‐related activities on paper versus screen modality with age as a continuous variable. Results: Key to our objectives, parents reported engaging in meaning‐related activities more frequently during shared reading on paper versus on screens and in code‐related activities more frequently during shared reading on screens than on paper. These effects did not differ across age, although overall, parents reported engaging slightly more frequently in shared reading activities in general when their child was older. Conclusions: The findings show that parents are engaging with their children differently as they read together on paper versus screens. Consistent with prior research, we found that activities emphasising the meaning of stories dominate shared paper book reading experiences in the preschool years. Critically shared reading on screens tips this balance, with parents reporting more code‐related activities. These patterns identify the learning opportunities enabled by the affordances of shared reading on screens. Highlights: What is already known about this topicResearch to date on shared reading has shown that parents tend to focus on the meaning of the story (meaning‐related activities) over the features of the print (code‐related activities).This research has largely described how parents read on paper.Parents and children are increasingly reading on screens. What this paper addsWe found that parents report engaging in more meaning‐related activities when reading with their children on paper than on screens.Parents engage in more code‐related activities when reading with their children on screens than on paper.While we found that the frequency of shared reading activities in general increased slightly with the age of the children, the frequency of parental engagement in both types of shared reading activities is similar across the preschool years. Implications for theory, policy or practiceThe findings show that parents report engaging with their children differently as they read together on paper versus screens.Consistent with prior research, we found that when reading on paper, parents emphasise the meaning of stories during shared book reading experiences in the preschool years.In contrast, parents report more code‐related activities when doing shared reading on a screen than on paper. These findings suggest that the affordances offered by reading on screens shift the learning opportunities offered by shared reading. [ABSTRACT FROM AUTHOR]

Adopting a scoping review method, we examined peer‐reviewed academic papers published about human–lion conflict (HLC) (including coexistence) and identified knowledge gaps. We searched papers published between January 1981 and December 2023 using academic databases, with the key terms African lion, human–lion conflict, human–lion coexistence, and human–lion interaction. This produced 485 records, reduced to 137 after using additional criteria. Ninety‐eight papers were focused on lions in Kenya, Tanzania, Zimbabwe, and Botswana. Ten pan‐African studies were identified in our review. Our inductive analysis identified four themes related to HLC: attitudes and perceptions toward lions, causes of HLC, consequences of HLC, and mitigating HLC. Some limitations identified in systematic reviews of human–wildlife conflict have been addressed in recent years, such as broadening the geographical scale of research. However, some knowledge gaps remain, including a lack of assessment of mitigation strategies and studies on climate changes impact on human–lion conflict. Addressing the knowledge gaps highlighted in this review will require diversifying the disciplinary composition of the research teams and increasing researcher reflexivity. [ABSTRACT FROM AUTHOR]

In exploring the intersection of scholarly research with technological advancement and societal impact, our analysis delves into nearly 40 million research papers spanning from 1950 to 2020 across all fields of study in science. Our scrutiny reveals an intriguing phenomenon: papers characterized by a higher CD index, often considered transformative, paradoxically exhibit a diminished propensity to influence technological and societal domains. This observation suggests a latent bias against the CD index, prompting a deeper inquiry into its implications. To unravel this trend, we introduce the concept of “disruptive citation,” a nuanced metric gauging the absolute disruptive impact of papers. Notably, papers drawing higher disruptive citations exhibit a significantly higher probability to influence both technological and societal spheres. Upon examining the heterogeneity across years and fields, we identify a bias against the CD index predominantly in the last two decades and within STEM fields. However, the positive effects of disruptive impact remain consistent across all years and fields. Our findings remain robust even when employing alternative measures of disruptive impact and controlling for total citations. By shedding light on these dynamics, our study seeks to enrich discussions regarding the recognition and role of disruptive scientific endeavors in shaping our world. [ABSTRACT FROM AUTHOR]

Objective Background Methods Results Conclusions To provide healthcare professionals guidance on youth at risk for prolonged recovery and post‐traumatic headache (PTH), and on pharmacologic and non‐pharmacologic management of PTH due to concussion and mild traumatic brain injury.Headache is the most common persistent post‐concussive symptom affecting 8% of youth for >3 months after concussion. Over the past decade, many studies have explored the treatment of PTH in youth, but there are no established guidelines.This white paper is based on a synthesis of an updated systematic review of the literature on treatment of PTH and a narrative review of the literature on risk factors for prolonged recovery and health disparities. Results were interpreted by a group of expert providers in PTH in children and adolescents through collaboration of the PTH and pediatric special interest groups of the American Headache Society.Factors that consistently were associated with prolonged recovery from concussion and persistent PTH included female sex, a high number of acute symptoms, and adolescent age. Social determinants of health also likely play an important role in PTH and deserve consideration in the clinical and research settings. A total of 33 studies met the criteria for inclusion in the systematic review of PTH treatment in youth, although most were retrospective and of fair‐to‐poor quality. Treatment strategies included acute and preventive pharmacologic management, procedures, neuro‐modulatory devices, physical therapy, physical activity, and behavioral health support. A collaborative care approach that includes a thoughtful combination of these management strategies is likely most effective.This white paper provides a roadmap for tailoring the treatment of PTH based on factors influencing prolonged headache, the timing of therapies, and therapies with the most evidence for treating PTH in youth. We also highlight research needed for developing more definitive guidelines on PTH management in youth. [ABSTRACT FROM AUTHOR]

Capturing short‐lived intermediates at the molecular level is key to understanding the mechanism and dynamics of chemical reactions. Here, we have developed a paper‐in‐tip bipolar electrolytic electrospray mass spectrometry platform, in which a piece of triangular conductive paper incorporated into a plastic pipette tip serves not only as an electrospray emitter but also as a bipolar electrode (BPE), thus triggering both electrospray and electrolysis simultaneously upon application of a high voltage. The bipolar electrolysis induces a pair of redox reactions on both sides of BPE, enabling both electro‐oxidation and electro‐reduction processes regardless of the positive or negative ion mode, thus facilitating access to complementary structural information for mechanism elucidation. Our method enables real‐time monitoring of transient intermediates (such as N,N‐dimethylaniline radical cation, dopamine o‐quinone (DAQ) and sulfenic acid with half‐lives ranging from microseconds to minutes) and transient processes (such as DAQ cyclization with a rate constant of 0.15 s−1). This platform also provides key insights into electrocatalytic reactions such as Fe (III)‐catalyzed dopamine oxidation to quinone species at physiological pH for neuromelanin formation. [ABSTRACT FROM AUTHOR]

Capturing short‐lived intermediates at the molecular level is key to understanding the mechanism and dynamics of chemical reactions. Here, we have developed a paper‐in‐tip bipolar electrolytic electrospray mass spectrometry platform, in which a piece of triangular conductive paper incorporated into a plastic pipette tip serves not only as an electrospray emitter but also as a bipolar electrode (BPE), thus triggering both electrospray and electrolysis simultaneously upon application of a high voltage. The bipolar electrolysis induces a pair of redox reactions on both sides of BPE, enabling both electro‐oxidation and electro‐reduction processes regardless of the positive or negative ion mode, thus facilitating access to complementary structural information for mechanism elucidation. Our method enables real‐time monitoring of transient intermediates (such as N,N‐dimethylaniline radical cation, dopamine o‐quinone (DAQ) and sulfenic acid with half‐lives ranging from microseconds to minutes) and transient processes (such as DAQ cyclization with a rate constant of 0.15 s−1). This platform also provides key insights into electrocatalytic reactions such as Fe (III)‐catalyzed dopamine oxidation to quinone species at physiological pH for neuromelanin formation. [ABSTRACT FROM AUTHOR]

The compact model plays a pivotal role as a critical link between device fabrication and circuit design. While conventional compact model theories and techniques are generally mature, the intricate physical mechanisms of gallium nitride (GaN) high‐electron mobility transistors (HEMTs) pose challenges due to their strong non‐linearity in high‐power radio frequency (RF) applications. This complexity hinders achieving the required precision for applications using traditional modeling methods. Therefore, the development of physics‐based compact modeling techniques becomes crucial for a deeper understanding of the intricate features of GaN HEMTs. This paper explores the advancements and the current state‐of‐the‐art in physics‐based compact models. The comprehensive review covers both intrinsic core models and real‐device effects models. Core models are presented with a focus on fundamental concepts, development overviews, and applications. Additionally, the real‐device effects models are introduced, encompassing advanced characterization techniques and modeling methodologies. Furthermore, the paper outlines future trends in physics‐based compact modeling, providing valuable insights for individuals engaged in transistor compact modeling work. [ABSTRACT FROM AUTHOR]

Forensic document examination has been considered one of the most important fields in the forensic science. For this, a quick, effective, and cheap techniques for evaluation of forensic evidence is highly required. This study explores the comparison of A4 document paper by chemical and physical analysis. 16 of white A4 paper from different brands were analyzed by FTIR for investigation of structural characteristics. Video Spectral Comparator 8000 has been used to compare the A4 papers under different light source. The inorganic filler composition in the paper is also explored by ICP‐OES. The calcium carbonate content in document papers play a discriminant role which found to be between 16.02 % and 35.54 %. Also, water contact angle has been utilized in order to examine the surface of paper which is generally related to the inorganic filler and other additives. The WCA results ranged between 83° and 111° that enable quick and easy way to compare A4 document papers. The experimental results have demonstrated that besides FTIR methods, other methods such as ICP‐OES for elemental composition, WCA for wetting test, VSC for visualization under different light of source could have been applied for comparison of document papers in case of criminal cases. [ABSTRACT FROM AUTHOR]

Flexible graphene‐based paper electrodes (FGPEs) are a new class of study and the research on this electrode material has been carried out for approximately ten years. FGPEs have many advantages compared to classical solid electrodes such as being flexible, foldable, adaptable to flexible electronics, being cut, easily shaped, and effective and adjustable modification. In this work, the applicability of FGPEs modified with polyindole (PIN) thin films and zinc oxide nanoparticles (ZnO‐NPs) to energy‐storage systems as a supercapattery design is presented, and especially the limitations of ZnO‐NPs for energy‐storage applications are revealed to inform researchers working for a similar purpose. Capacitance calculations have been performed using both cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD) experiments. It was observed that the rGO/PIN paper demonstrated almost 30 times more energy‐storage capacity than that of the rGO/PIN/ZnO paper due to the electrochemical instability of ZnO‐NPs on the flexible electrode platform at the applied potential region in 1.0 M HClO4 solution. The rGO/PIN paper with a highly flexible property exhibited an energy density of 74.5 W h cm−2 and a power density of 2258 W cm−2 at a current density of 2.2 mA cm−2, revealing hopeful results for future modular and flexible approaches. [ABSTRACT FROM AUTHOR]

To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p <.001). Urinalysis performed better in sensitivity (77.3% vs. 40.9%, p =.04) and the area under the receiver operating characteristic curves (AUC) (0.84 [95% CI 0.74–0.94] vs. 0.69 [95% CI 0.55–0.83], p =.04) than CRD, respectively. The sensitivity, specificity, AUC of the parallel test of them is 86.4% (64.0%–96.4%), 89.1% (85.5%–92.0%), and 0.88 (95% CI 0.79–0.96). And the serial test is 31.8% (14.7%–54.9%), 98.7% (96.8%–99.5%), 0.65 (95% CI 0.51–0.79), accordingly. The urinalysis is a better diagnosing test for preeclampsia. CRD could aid in the diagnosis of patients with preeclampsia. Combined the two tests in suspected patients may further improve the performance in the diagnosis of preeclampsia. Further study need to be made for its potential clinical practice. [ABSTRACT FROM AUTHOR]

Three chemosensors ISA‐1, ISA‐2, and ISA‐3 were synthesized for the detection of Cu2+ and Hg2+ ions in a 50% H₂O‐DMF solution. ISA‐1 is specifically designed for the detection of Cu2+ ions, while ISA‐2 can detect both Cu2⁺ and Hg2⁺ ions. Upon interaction with Cu2⁺, ISA‐1 undergoes a naked‐eye colorimetric transition from pink to blue. ISA‐2 exhibits a similar pink‐to‐blue color change in the presence of Cu2+ ion, however, colorless when exposed to Hg2+ ion. The detection limits for Cu2+ using ISA‐1 and ISA‐2 are 0.574 ppm and 0.0074 ppm, respectively, both of which are significantly lower than the WHO guideline of ≤1.5 ppm for Cu2+ in drinking water. These chemosensors have also been successfully integrated into paper strips and logic gate systems and applied for the analysis of water and food samples. [ABSTRACT FROM AUTHOR]

Summary This Good Practice Paper provides recommendations for the use of advanced imaging for earlier diagnosis and morbidity prevention in multiple myeloma. It describes how advanced imaging contributes to optimal healthcare resource utilisation by in newly diagnosed and relapsed myeloma, and provides a perspective on future directions of myeloma imaging, including machine learning assisted reporting. [ABSTRACT FROM AUTHOR]

Reflective e‐paper displays show promising prospects with the increasing demand for energy‐efficient and sustainable technologies. However, the intrinsic incapability to display in dark environments hinders their broader application, and it is significantly important to enable reflective displays to achieve good display effects under various lighting conditions. Here, a flexible dual‐mode display device is proposed, which can demonstrate both reflective and emissive modes and achieve swift and straightforward mode switching by altering the driving waveforms. The single display layer of the device is formed by uniformly dispersing microcapsules and electroluminescent powder within the waterborne polyurethane dielectric matrix, which exhibits a reflective contrast ratio of 5.6 and a maximum luminance of 107.5 cd m−2. At the same time, the device possesses the merits of fast response speed at the millisecond level, high‐performance stability, and good mechanical robustness. Besides, through the waveform design, a reflection‐emission hybrid mode is proposed for more diverse display effects. Furthermore, a concept of dual‐mode contrast ratio is established, which further pinpoints the reflection‐emission transition points, thereby prompting the balance between energy‐saving and watching experience. [ABSTRACT FROM AUTHOR]

Derived from the myeloid lineage, granulocytes, including basophils, eosinophils, and neutrophils, along with mast cells, play important, often disparate, roles across the allergic disease spectrum. While these cells and their mediators are commonly associated with allergic inflammation, they also exhibit several functions either promoting or restricting tumor growth. In this Position Paper we discuss common granulocyte and mast cell features relating to immunomodulatory functions in allergy and in cancer. We highlight key mechanisms which may inform cancer treatment and propose pertinent areas for future research. We suggest areas where understanding the communication between granulocytes, mast cells, and the tumor microenvironment, will be crucial for identifying immune mechanisms that may be harnessed to counteract tumor development. For example, a comprehensive understanding of allergic and immune factors driving distinct neutrophil states and those mechanisms that link mast cells with immunotherapy resistance, might enable targeted manipulation of specific subpopulations, leading to precision immunotherapy in cancer. We recommend specific areas of investigation in AllergoOncology and knowledge exchange across disease contexts to uncover pertinent reciprocal functions in allergy and cancer and allow therapeutic manipulation of these powerful cell populations. These will help address the unmet needs in stratifying and managing patients with allergic diseases and cancer. [ABSTRACT FROM AUTHOR]

In this work, stacked SiC fibers paper‐reinforced SiC ceramic matrix composites (SiCnf/SiC CMCs) were prepared by nanoimpregnation and transient eutectic (NITE) process using ultra‐long single‐crystal SiC nanofibers. The effect of the SiCnf surface modification via boron nitride (BN) interphase deposition as well as the sintering additive (Al2O3–Y2O3) content on the density, microstructure, and mechanical properties of SiCnf/SiC CMCs has been investigated systematically. The results revealed that the laminated SiCnf/SiC CMCs feature a significant saw‐tooth‐like curve on the load–displacement test, which indicates that the obtained laminated structure with the weak interlayer binding owning to the BN coating treatment possesses significant toughening to the SiC ceramics. Specifically, the SiCnf/SiC CMCs with the sintering additive content of 12 wt% revealed a fracture toughness of over 10 MPa m1/2 after 60 min of BN interface deposition, which is 104.31% higher than that of the composites prepared without BN coating. [ABSTRACT FROM AUTHOR]

Annually on 1 January, Japan's efficient postal system circulates 2.5 billion New Year cards to arrive simultaneously in every home in the country. Based on ethnographic fieldwork around Osaka, this article investigates the continued popularity of this exchange of paper forms in an age of smartphones and fast internet connections. Extending recent anthropological scholarship about digital data, I argue that these seemingly trivial cards have transformative potential. They are active, potent participants in the cultivation, accumulation, and ongoing care of multiple networks of social, economic, and spiritual relationships. Through an analysis of the material and aesthetic qualities of the cards, I highlight how their front‐back design embodies co‐existing, but contrasting, dimensions of Japanese relations along a qualification‐quantification and personalization‐standardization axis. The cards also produce depth and scale by linking intimate, domestic concerns with larger political and economic interests, while weaving together multiple temporal dimensions. Ultimately, they exemplify how the manipulation of surfaces can have profound cosmological consequences. These cards possess a spiritual and social potency that generates an all‐encompassing, intimate closeness that yearly rejuvenates society by reconstituting individuals as part of the whole. [ABSTRACT FROM AUTHOR]

Chronic pruritus (CP) is frequent in general medicine and the most common complaint in general dermatology. The prevalence of CP is expected to rise in the future due to the ageing population. The clinical presentation, underlying aetiology and treatment strategy of CP are heterogeneous. Also, individual treatment aims and physical, psychic and economic burdens of patients might vary. Chronic prurigo (CPG) is the most severe disease in the chronic pruritus spectrum, being associated with long‐standing scratch‐induced skin lesions and a therapy refractory itch‐scratch‐cycle. It is thus important to raise disease awareness for CP and CPG in the general public and among decision‐makers in the health system. Further, there is a need to support a rational clinical framework to optimize both diagnostics and therapeutics. Currently, there is still a shortcoming regarding approved therapies and understanding CP/CPG as severe medical conditions. Therefore, the EADV Task Force Pruritus decided to publish this white paper based on several consensus meetings. The group consented on the following goals: (a) ensure that CP is recognized as a serious condition, (b) increase public awareness and understanding of CP and CPG as chronic and burdensome diseases that can greatly affect a person's quality of life, (c) clarify that in most cases CP and CPG are non‐communicable and not caused by a psychiatric disease, (d) improve the support and treatment given to patients with CP to help them manage their disease and (e) publicize existing therapies including current guidelines. We aim to point to necessary improvements in access and quality of care directed to decision‐makers in health policy, among payers and administrations as well as in practical care. [ABSTRACT FROM AUTHOR]

The natural polymer cellulose exhibits significant potential for various applications due to its unique optical, electronic, and chemical properties. However, the use of cellulose materials in luminescent applications has been relatively limited. This study aims to develop a simple and efficient method to enhance the fluorescence of cellulose materials by incorporating rare earth elements, thereby expanding their range of applications. In this work, we synthesized hybrid cellulose materials by grafting Eu‐bpy (H2bpydc=2,2‐bipyridine‐5,5‐dicarboxylic acid) onto the surface of cellulose fibers through a straightforward post‐processing procedure, resulting in materials with excellent fluorescence properties. By leveraging the abundant hydroxyl groups on the surface of cellulose fibers, Eu‐bpy@CF exhibits high luminescence in response to relative humidity and pH changes, with a noticeable color shift from light red to red visible to the naked eye. Consequently, these materials were further applied in the construction of smart fluorescent switches for the highly accurate and selective detection of phenylenediamine. Our research provides a simple approach to creating environmentally responsive handheld fluorescent papers and expands the diversity of rare‐earth cellulose fibers for developing new fluorescent materials with smart functions. [ABSTRACT FROM AUTHOR]

Despite a plethora of treatments available for alleviating mental health issues, it has been reported that interventions, as they stand, are simply just not good enough (Kalin, Am. J. Psychiatry, 176, 2019, 885). Increasing figures of suicides are published each year, most recently standing at over 49,000 in the United States. Contested arguments continue in the field of psychotherapy with regard to finding the ‘best’ treatments for mental health issues. Recently, there have been calls for mental health practitioners and researchers to move towards innovation by asking different questions and creating new methods, albeit underpinned by rigorous scientific investigation. One such method currently being adopted with promising outcomes is the integration of mind–body techniques, such as yoga, into mental health treatments. Yoga is an ancient practice which provides a holistic system of healing and complementary philosophy to western understandings of the human mind. Like psychotherapy, yoga seems to work with unconscious processes, which can enable long‐term change. Combined with psychotherapeutic discovery, novel treatment models which incorporate both yoga and psychotherapy could therefore be provided. Yoga‐integrated psychotherapy (YiP), as a new model of treatment, could enhance outcomes for clients presenting with a range of difficulties as it aims to work with these methods as well as transdiagnostic understandings of distress. Additionally, YiP underscores the importance of a humanistic approach, which values the uniqueness of individuals and their subjective understandings of distress. Promising data from a recent pilot study of a YiP model in which participants describe the approach as ‘life changing’ form the basis of this discussion paper. The question arising is whether a humanistic and yoga‐integrated approach to psychotherapy could assist in enhancing client outcomes. [ABSTRACT FROM AUTHOR]

Summary This Good Practice Paper provides recommendations for the baseline investigation, risk stratification and use of prophylactic interventions for patients with large B‐cell lymphoma at risk of central nervous system relapse. Recent evidence which has questioned the role of high‐dose methotrexate in this clinical scenario is discussed in detail. [ABSTRACT FROM AUTHOR]

Transition services—programs that support adolescents and young adults (AYAs) as they move from a child‐centered to a more autonomous, adult‐orientated healthcare system—have been associated with improved short‐ and long‐term healthcare outcomes. Unfortunately, there is a paucity of evidence exploring transition services within the neurogastroenterology and motility (NGM) field. The overall aim of this article, endorsed by the American Neurogastroenterology and Motility Society and European Society of Neurogastroenterology and Motility, is to promote a discussion about the role of transition services for patients with NGM disorders. The AYAs addressed herein are those who have: (a) a ROME positive disorder of gut–brain interaction (DGBI), (b) a primary or secondary motility disorder (including those with motility disorders that have been surgically managed), or (c) an artificial feeding requirement (parenteral or enteral tube feeding) to manage malnutrition secondary to categories (a) or (b). The issues explored in this position paper include the specific physical and psychological healthcare needs of patients with NGM disorders; key healthcare professionals who should form part of a secondary care NGM transition service; the triadic relationship between healthcare professionals, caregivers, and patients; approaches to selecting patients who may benefit most from transition care; methods to assess transition readiness; and strategies with which to facilitate transfer of care between healthcare professionals. Key areas for future research are also addressed, including the construction of NGM‐specific transition readiness questionnaires, tools to assess post‐transfer healthcare outcomes, and educational programs to train healthcare professionals about transition care in NGM. [ABSTRACT FROM AUTHOR]

Introduction: Distinguishing and categorizing the origin of garlic are highly significant, considering its widespread use as a flavoring agent. With billions of dollars annually in global trade, garlic is frequently susceptible to fraudulent practices. Methodology: Paper spray ionization mass spectrometry (PS‐MS) was employed to quickly analyze garlic samples from distinct geographic origins: China and Brazil. The so‐generated PS‐MS data were treated with metabolomic multivariate approaches, and the garlic samples from these different geographic regions were easily discriminated. Results: Brazilian garlic was characterized to contain higher levels of amino acids, such as arginine, proline, and valine, and organosulfur compounds, such as allicin, alliin, and l‐γ‐glutamil‐S‐allyl‐l‐cysteine, compared to Chinese garlic. The PS‐MS data were treated employing multivariate approaches, typically used in the metabolomics field, and this protocol was promptly able to discern among both types of samples. Conclusion: Hence, this combined strategy holds promise not only as an effective tool for the authentication of the geographical origin of garlic but also as a powerful means for biomarker discovery. [ABSTRACT FROM AUTHOR]

Both the incidence and prevalence of well‐differentiated neuroendocrine tumours from the small intestine (Si‐NET) are gradually increasing. Most patients have non‐functioning tumours with subtle GI symptoms and tumours are often discovered incidentally by endoscopy or at advanced disease stages by imaging depicting mesenteric lymph node and /or liver metastases while around 30% of the patients present with symptoms of the carcinoid syndrome. Adequate biochemical assessment and staging including functional imaging is crucial for treatment‐related decision‐making that should take place in an expert multidisciplinary team setting. Preferably, patients should be referred to specialised ENETS Centres of Excellence or centres of high expertise in the field. This guidance paper provides the current evidence and best knowledge for the management of Si‐NET grade (G) 1–3 following 10 key questions of practical relevance for the diagnostic and therapeutic decision making. [ABSTRACT FROM AUTHOR]