Search

Cableways have been widely used in industrial areas, cities, and scenic spots due to their advantages, such as being a convenient mode of transportation, time-saving, labor-saving, and low cost, as well as offering environmental protection. To ensure the safe operation of a cableway, based on the characteristic that the velocity of the cableway bracket is approximately zero in a static deformation monitoring environment, a deformation monitoring method called zero velocity update (ZUPT)-based GNSS/IMU tightly coupled algorithm with the constraint of the Earth's rotation angular velocity was proposed. The proposed method can effectively solve the problem of a single GNSS being unable to output attitude, which is directly related to the status of wire ropes and cable cars. Meanwhile, ZUPT is used to restrain the Kalman filter's divergence when IMU is stationary. However, the improvements of ZUPT on attitude are not obvious, so the constraint of the Earth's rotation angular velocity was applied. The performance of the proposed method was evaluated through monitoring the cableway bracket of the Yimeng Mountain Tourism area in Shandong. Compared with the ZUPT-based GNSS/IMU tightly coupled algorithm (ZUPT-TC), the proposed method can further constrain the error accumulation of IMU while stationary and, therefore, it can provide reliable position and attitude information on cableway brackets. [ABSTRACT FROM AUTHOR]

Global Navigation Satellite System (GNSS) carrier phase measurement for short baseline meets the requirements of deformation monitoring of large structures. However, the carrier phase multipath effect is the main error source with double difference (DD) processing. There are lots of methods to deal with the multipath errors of Global Position System (GPS) carrier phase data. The BeiDou navigation satellite System (BDS) multipath mitigation is still a research hotspot because the unique constellation design of BDS makes it different to mitigate multipath effects compared to GPS. Multipath error periodically repeats for its strong correlation to geometry of satellites, reflective surface and antenna which is also repetitive. We analyzed the characteristics of orbital periods of BDS satellites which are consistent with multipath repeat periods of corresponding satellites. The results show that the orbital periods and multipath periods for BDS geostationary earth orbit (GEO) and inclined geosynchronous orbit (IGSO) satellites are about one day but the periods of MEO satellites are about seven days. The Kalman filter (KF) and Rauch-Tung-Striebel Smoother (RTSS) was introduced to extract the multipath models from single difference (SD) residuals with traditional sidereal filter (SF). Wavelet filter and Empirical mode decomposition (EMD) were also used to mitigate multipath effects. The experimental results show that the three filters methods all have obvious effect on improvement of baseline accuracy and the performance of KT-RTSS method is slightly better than that of wavelet filter and EMD filter. The baseline vector accuracy on east, north and up (E, N, U) components with KF-RTSS method were improved by 62.8%, 63.6%, 62.5% on day of year 280 and 57.3%, 53.4%, 55.9% on day of year 281, respectively. [ABSTRACT FROM AUTHOR]

A new nonlinear robust filter is proposed in this paper to deal with the outliers of an integrated Global Positioning System/Strapdown Inertial Navigation System (GPS/SINS) navigation system. The influence of different design parameters for an H∞ cubature Kalman filter is analysed. It is found that when the design parameter is small, the robustness of the filter is stronger. However, the design parameter is easily out of step in the Riccati equation and the filter easily diverges. In this respect, a singular value decomposition algorithm is employed to replace the Cholesky decomposition in the robust cubature Kalman filter. With large conditions for the design parameter, the new filter is more robust. The test results demonstrate that the proposed filter algorithm is more reliable and effective in dealing with the outliers in the data sets produced by the integrated GPS/SINS system. [ABSTRACT FROM AUTHOR]

Recent study indicates that by using the inertial measurement unit (IMU) sensors inside smartphones, we can obtain similar navigation solutions to the professional ones. However, the sampling rates of the gyros and accelerometers inside some types of smartphones are not set in the same frequencies, i.e., the gyros of "Huawei p40" are in 50 Hz while the accelerometer is 100 Hz. The conventional method is resampling the higher frequency to the lower frequency ones, which means the resampled accelerometer will lose half frequency observations. In this work, a modified Kalman filter was proposed to integrate all these different rate IMU data in the GNSS/IMU-smartphone coupled navigation. To validate the proposed method, a terrestrial test with two different types of android smartphones was done. With the proposed method, a slight improvement of the attitude solutions can be seen in the experiments under the GNSS open-sky condition, and the obvious improvement of the attitude solutions can be witnessed at the simulated GNSS denied situation. The improvements by 45% and 23% of the horizontal position accuracy can be obtained from the experiments under the GNSS outage of 50 s in a straight line and 30 s in a turning line, respectively. [ABSTRACT FROM AUTHOR]