Search

As a lignocellulosic material, wastepaper is a potential material for ethanol production. However, little research on the enzymatic hydrolysis of wastepaper pulp has been conducted. In this study, the enzymatic hydrolysis of different waste pulp fractions (R80 represents greater than 80-mesh wastepaper pulp, R80-180 represents the range of 80- to 180-mesh wastepaper pulp, and R180 represents smaller than 180-mesh waste paper pulp) were carried out at 50 °C, pH 4.8, for 96 h, with a substrate concentration of 5% (w/v) and cellulase loading of 18 FPU/g cellulose. In terms of the specific surface area, fiber structure, and surface morphology, R80-180 had the highest affinity to cellulase and therefore the highest glucose yield of 80.33%. R180 had the lowest glucose yield (55.36%) because of its high ash content (21.36%), which reduced the adsorption of cellulase to cellulose. The enzymatic hydrolysis of R80 mixed with R80 or R80-180 was also studied. Results indicated that adding R80-180 increased the glucose yield of R80. The highest glucose yield (82.57%) was obtained when 15% R80-180 was mixed with R80. However, the glucose content decreased when R180 was mixed with R80 because of its high ash content. [ABSTRACT FROM AUTHOR]

Furfural residues (FRs) were pretreated with laccase or a laccasemediator (1-hydroxybenzotriazole, HBT) system to produce fermentable sugar for bioethanol production. Compared to laccase-only pretreatment, laccase-mediator pretreatment dissolved more lignin. Approximately 10.5% of the initially present lignin was removed when FRs were treated with a laccase loading of 100 U/g of dry substrate in 1% (w/w) HBT at 48 °C for 24 h in an acetate buffer (pH 4.8). The enzymatic saccharification process was carried out by a combined laccase or laccase-mediator pretreatment without washing of the treated solids. The results showed that active laccase had a negative effect on the rate and yield of enzymatic hydrolysis. Laccase-oxidized HBT seriously reduced glucose yield. However, non-oxidized HBT increased glucose yield when laccase was deactivated at 121 °C for 20 min prior to enzymatic hydrolysis. The highest glucose yield, 80.9%, was obtained from the substrate pretreated with 100 U/g of dry substrate laccase and 1% (w/w) HBT at 48 °C for 24 h in an acetate buffer (pH 4.8). Furthermore, the structures of FRs before and after laccase-mediator pretreatment were characterized by scanning electron microscopy (SEM) and Fourier Transform Infrared spectroscopy (FT-IR). [ABSTRACT FROM AUTHOR]

A combination of steam explosion (SE) and alkaline peroxide (AP) used to pretreat bamboo was investigated. Steam explosion at 224 °C for 4 min was applied to bamboo, and the pretreated bamboo was delignified by alkaline peroxide. Enzymatic hydrolysis was compared in the pretreated samples. Steam pretreatment led to remarkable hemicellulose solubilization (63.2%). Lignin solubilization (93.1%) was achieved by alkaline peroxide treatment of steam-pretreated bamboo at 80 °C for 1 h in 0.88% (v/v) H2O2, whereas only 33.4% of lignin was solubilized when using raw bamboo. Pretreatment methods resulted in a low degree of polymerization and increased hydrolysis of cellulose. A maximum glucose yield of 90.5% was achieved with a combined steam explosion and alkaline peroxide pretreatment. The surface structure of treated bamboo and the adsorption of enzyme on the substrate were characterized by X-ray photoelectron spectroscopy. Delignification decreased enzyme adsorption and increased enzymatic conversion. SEM analyses indicated that SE-AP pretreatment disrupted lignin networks and exposed crystalline cellulose in bamboo more effectively than SE or AP pretreatment alone. [ABSTRACT FROM AUTHOR]