Search

Rail corrugation is very serious in Cologne egg fastener track; effective control measures are still lacking. The cause of the corrugation wear on a curved metro track is analyzed based on the friction-induced vibration theory. A finite element model is established to study the frequency domain and time domain features of the friction-induced oscillation of this system. The influences of the fastener spacing and the fastener support length on the corrugation wear are investigated to develop countermeasures. The simulation results show that the friction-induced vibration of the wheel-track system is the wavelength-fixed mechanism of the corrugation wear of rail of the curved Cologne egg fastener track. There are two reasons why the low rail corrugation wear is more serious. The contact resultant force between the low rail and the wheel is obviously bigger than that between the wheel and the high rail, resulting in a higher wear rate of the low rail. The contact force fluctuation of the low rail caused by the friction-induced vibration is more severe, resulting in a higher corrugation wear evolution speed on the low rail. The friction-induced oscillation cannot be eliminated only by adjusting the fastener support length and spacing. However, the long-wavelength corrugation wear instead of the more harmful short-wavelength corrugation wear can be produced by adjusting the fastener support length and the fastener spacing to alleviate the influence of corrugation wear on the vehicle-track system. [ABSTRACT FROM AUTHOR]

• The model can account for the non-linear lifting of the flange groove and the effects of wheelset traverse and side roll. • The wheel tread and flange are alternately loaded with two wheel load transition areas in the frog area. • Wear in the flange bearing area is significantly higher than in the tread bearing area, with an increase of 59.7%. • RCF damage dominates in the wing rail and the two wheelload transition areas. • Reducing the speed to 15 km/h significantly improves the service performance of the fixed frog. The tram No. 3 turnout fixed frog uses a variation in the depth of the flange groove so that the wheel rolls over the frog area in a continuous flange bearing. This method of travelling over the turnout requires the wheel load to transition back and forth between the tread and the flange, resulting in wheel-rail impact, which in turn affects service life. In order to investigate its service characteristics, this paper has established a transient wheel-rail rolling contact finite element model for the No. 3 turnout fixed frog. The macroscopic dynamic response and microscopic wheel-rail contact solution as the tram passes through the turnout at different axle weights and speeds are analysed in detail, and the changing patterns of wear and fatigue damage are investigated. The research shows that rail wear is particularly severe in the wheel flange bearing area, approximately 1.6 times greater than in the tread bearing area. In addition, when tram speeds are reduced to 15 km/h, there is a significant reduction in wheel-rail impact and wear, thereby improving ride smoothness and safety. The results of this study are of great significance to the operation and maintenance of the No.3 fixed frog turnout. [ABSTRACT FROM AUTHOR]