Search

Accurate prediction of air quality is crucial for assessing the state of the atmospheric environment, especially considering the nonlinearity, volatility, and abrupt changes in air quality data. This paper introduces an air quality index (AQI) prediction model based on the Dung Beetle Algorithm (DBO) aimed at overcoming limitations in traditional prediction models, such as inadequate access to data features, challenges in parameter setting, and accuracy constraints. The proposed model optimizes the parameters of Variational Mode Decomposition (VMD) and integrates the Informer adaptive sequential prediction model with the Convolutional Neural Network-Long Short Term Memory (CNN-LSTM). Initially, the correlation coefficient method is utilized to identify key impact features from multivariate weather and meteorological data. Subsequently, penalty factors and the number of variational modes in the VMD are optimized using DBO. The optimized parameters are utilized to develop a variationally constrained model to decompose the air quality sequence. The data are categorized based on approximate entropy, and high-frequency data are fed into the Informer model, while low-frequency data are fed into the CNN-LSTM model. The predicted values of the subsystems are then combined and reconstructed to obtain the AQI prediction results. Evaluation using actual monitoring data from Beijing demonstrates that the proposed coupling prediction model of the air quality index in this paper is superior to other parameter optimization models. The Mean Absolute Error (MAE) decreases by 13.59%, the Root-Mean-Square Error (RMSE) decreases by 7.04%, and the R-square (R2) increases by 1.39%. This model surpasses 11 other models in terms of lower error rates and enhances prediction accuracy. Compared with the mainstream swarm intelligence optimization algorithm, DBO, as an optimization algorithm, demonstrates higher computational efficiency and is closer to the actual value. The proposed coupling model provides a new method for air quality index prediction. [ABSTRACT FROM AUTHOR]

This paper proposes a ResGA-Net algorithm for cloud top height (CTH) retrieval using FY-4A satellite data. The algorithm utilizes genetic algorithms for data selection and employs a residual module-based neural network for modeling. It takes the spectral channel data from the FY-4A satellite as input features and uses CTH extracted from ground-based millimeter-wave cloud radar reflectivity as the target. By combining the large observation scale of the FY-4A satellite and the high accuracy of ground-based cloud radar observations, the model can generate satellite CTH products with higher precision. To validate the effectiveness of the algorithm, experiments were conducted using data from the Beijing area spanning from January 2020 to January 2022. The experimental results show that the metrics of the proposed ResGA-Net outperform those of various contrastive algorithms, and compared to the original FY-4A CTH product, the RMSE and MAE have decreased by 37.89% and 34.77%, while the PCC and SRCC have increased by 11.17% and 9.47%, respectively, demonstrating the superiority of the proposed method presented in this paper. [ABSTRACT FROM AUTHOR]

A solar heat pump based on the photovoltaic photothermal (PV/T) module is a new technology that can improve the photovoltaic efficiency and recovery of waste heat in photovoltaic conversion. The comprehensive efficiency of a system can thus be greatly improved. At present, there is little research on the simulation of a solar heat pump based on the Simulink 2018 software. In this paper, PV/T modules are modeled and simulated using the Simulink software based on the typical meteorological parameters in Beijing city during summer and winter conditions. Considering the system characteristics of a simultaneous operation, the models of all components such as the compressor, condenser, evaporator, expansion valve, and heat storage tanks contained in a system are established based on the system's working principle, energy conservation equations, and some empirical formulas and then simulated. As PV/T modules are the key influencing factor for system performance, the model and simulation process are introduced in detail in this paper. The results show that the surface temperature of PV/T modules under different operating conditions are all significantly lower than that of ordinary photovoltaic panels. The average temperature of PV/T modules is only 15.2 °C, which is 20.2 °C lower than that of ordinary panels under summer conditions, and the average temperature of PV/T modules is only 0.5 °C, 17.8 °C lower than that of ordinary panels under winter conditions. The average photoelectric efficiency can be improved by 15.4% and 8.9%. And, the temperature change amplitude of PV/T modules is lower, which weakens the temperature fluctuation of the modules. The photovoltaic efficiency is therefore further increased. As a result, the power generation and photovoltaic efficiency are both improved significantly. [ABSTRACT FROM AUTHOR]

Recent research has played a pivotal role in advancing our understanding of cloisonné enamel production in China during the 19th and 20th centuries. However, Christian workshops, whether operating under missionary subcontracting or owned by the Catholic Church, have yet to be accurately identified and contextualized. This article delves into three significant contexts. Firstly, it identifies and contextualizes the Christian connections and interactions of the Decheng private cloisonné workshop, involving the French Lazarist Bishop Alphonse Favier, in Beijing. Secondly, it identifies the cloisonné workshop stablished by the Lazarists in the Beitang complex in Beijing and elucidates the role it played. Finally, this paper presents new evidence concerning cloisonné Christian objects crafted by the Tushanwan Jesuit workshop in Shanghai. Some of the primary works of these three workshops are identified for the first time. Additionally, this paper shows that certain cloisonné crosses, some of them thought to be originally Japanese, including those referred to as Namban, were, in fact, crafted in Beijing during the 1920s. These preliminary results will contribute to placing Chinese Christian cloisonné within the history of Chinese Art and its interactions at a global level in the context of evangelization in China, the production of the so-called export art, and the processes of indigenization carried out by the Lazarists and the Jesuits. [ABSTRACT FROM AUTHOR]

The urban underlying surface may affect the thunderstorm process. However, current research on this phenomenon is still in its infancy. This paper aimed to analyze the influence of the urban underlying surface on the evolution of thunderstorm organization through ground observation and numerical simulation. The results indicated that when the thunderstorm system with strong synoptic conditions passed through the built-up area of Beijing, it exhibited obvious bifurcation and detour. The dynamic field of near-surface cold pools could serve as diagnostic indicators for understanding how the urban underlying surface affects the thunderstorm process. The large-scale compact-rise clusters in the city center could alter the movement direction and path of the cold pool outflow, thereby influencing the thunderstorm organization process. In addition to the spatial configuration of the building complex, the city size might also be an important factor influencing the thunderstorm process. This study might provide a fundamental foundation and technical support for predicting and assessing urban thunderstorm disasters. [ABSTRACT FROM AUTHOR]

China's policies about reducing carbon emissions mainly focus on saving energy and reducing pollutant emissions. However, the carbon emissions of the logistics industry remain high. Thus, logistics companies should not only reduce distribution costs, but also consider the impact of carbon emissions when planning distribution routes. This paper studies the supermarket delivery distribution route planning problem considering carbon emissions. Aiming at the lowest economic operating cost composed of fixed cost, driving cost, and carbon emission cost, we propose a grey wolf optimized genetic algorithm to generate delivery route plans, where the social rank and hunting behavior of the grey wolf optimization algorithm are integrated into the selection operation of the genetic algorithm. Finally, a real case of a large third-party logistics enterprise in Beijing is studied. The case study results verify the effectiveness and applicability of the model and algorithm. [ABSTRACT FROM AUTHOR]

Ultraviolet radiation (UV) has strong chemical and biological effects on human health and ecosystems, and it plays an important role in the atmospheric environment by affecting photochemical processes, etc. Clouds and aerosols are the main factors affecting UV radiation and analyzing the quantitative impact of them on UV radiation is of great significance. Using the observation data of UV radiation in Beijing from 2005 to 2020, as well as the data of aerosol optical depth (AOD), single scattering albedo (SSA), and other related parameters, this paper simulated the surface UV radiation in two scenarios of cloudless without aerosol and cloudless with aerosol based on the TUV (Tropospheric Ultraviolet-Visible model), and quantitatively evaluated the attenuation of UV radiation by aerosol and cloud in the Beijing area. The results show that UV radiation is more sensitive to changes in AOD. Fixing the SSA value to 0.9, when the AOD increases from 0.2 to 1.0, the UV radiation decreases from 21.16 W/m2 to 12.64 W/m2 at 12:00; when AOD is maintained at 0.64, the SSA increases from 0.7 to 0.95, and the UV radiation increases from 14.55 W/m2 to 19.91 W/m2. The average annual attenuation rates of ultraviolet radiation by aerosols and clouds from 2005 to 2020 are 30.64% and 40.22%, respectively; the monthly averaged attenuation rates are 30.48% and 42.04%, respectively; and the daily averaged attenuation rates are 31.02% and 50.45%, respectively. [ABSTRACT FROM AUTHOR]

Addressing inherent limitations in distinguishing metrics relying solely on Euclidean distance, especially within the context of geo-indistinguishability (Geo-I) as a protection mechanism for location-based service (LBS) privacy, this paper introduces an innovative and comprehensive metric. Our proposed metric not only incorporates geographical information but also integrates semantic, temporal, and query data, serving as a powerful tool to foster semantic diversity, ensure high servifice similarity, and promote spatial dispersion. We extensively evaluate our technique by constructing a comprehensive metric for Dongcheng District, Beijing, using road network data obtained through the OSMNX package and semantic and temporal information acquired through Gaode Map. This holistic approach proves highly effective in mitigating adversarial attacks based on background knowledge. Compared with existing methods, our proposed protection mechanism showcases a minimum 50% reduction in service quality and an increase of at least 0.3 times in adversarial attack error using a real-world dataset from Geolife. The simulation results underscore the efficacy of our protection mechanism in significantly enhancing user privacy compared to existing methodologies in the LBS location privacy-protection framework. This adjustment more fully reflects the authors' preference while maintaining clarity about the role of Geo-I as a protection mechanism within the broader framework of LBS location privacy protection. [ABSTRACT FROM AUTHOR]

By precisely controlling the distance between two train sets, virtual coupling (VC) enables flexible coupling and decoupling in urban rail transit. However, relying on train-to-train communication for obtaining the train distance can pose a safety risk in case of communication malfunctions. In this paper, a distance-estimation framework based on monocular vision is proposed. First, key structure features of the target train are extracted by an object-detection neural network, whose strategies include an additional detection head in the feature pyramid, labeling of object neighbor areas, and semantic filtering, which are utilized to improve the detection performance for small objects. Then, an optimization process based on multiple key structure features is implemented to estimate the distance between the two train sets in VC. For the validation and evaluation of the proposed framework, experiments were implemented on Beijing Subway Line 11. The results show that for train sets with distances between 20 m and 100 m, the proposed framework can achieve a distance estimation with an absolute error that is lower than 1 m and a relative error that is lower than 1.5%, which can be a reliable backup for communication-based VC operations. [ABSTRACT FROM AUTHOR]

To predict and explore the return period wind speed distribution in Beijing urban area, based on the short-term measured wind speed record, the measured independent storm peak samples are extracted and the Monte–Carlo numerical simulation method is used to randomly generate pseudo-independent storm peak samples with the same distribution as the independent storm peak samples. In addition, the appropriate threshold is used to select and extract the over-threshold independent storm peak samples from the measured samples. And, then, the return period wind speed of the whole wind direction is predicted. Further, the traditional Cook method is used to predict and analyze the return period wind speed of each wind direction according to the measured wind speed data. The results show that the return period wind speed prediction results of the whole wind direction corresponding to the simulated pseudo samples and the measured over-threshold samples are basically close to each other, and the maximum relative deviation is less than 7%. The mean relative deviation of the return period wind speed prediction results is about 10.6% between each wind direction and the whole wind direction, and the mean relative deviation is about 9.4% between the RPWS prediction result of each wind direction and the design value of the code. In addition, the return period wind speed prediction values of the west by southwest, northwest and north by northeast wind directions exceed the design value of the code, while the predicted values of the other wind directions are within the envelope range of the design value of the code. Finally, the research content of this paper can provide some reference for the wind resistance design analysis of building structures in Beijing area. [ABSTRACT FROM AUTHOR]

The profound impacts of severe air pollution on human health, ecological balance, and economic stability are undeniable. Precise air quality forecasting stands as a crucial necessity, enabling governmental bodies and vulnerable communities to proactively take essential measures to reduce exposure to detrimental pollutants. Previous research has primarily focused on predicting air quality using only time-series data. However, the importance of remote-sensing image data has received limited attention. This paper proposes a new multi-modal deep-learning model, Res-GCN, which integrates high spatial resolution remote-sensing images and time-series air quality data from multiple stations to forecast future air quality. Res-GCN employs two deep-learning networks, one utilizing the residual network to extract hidden visual information from remote-sensing images, and another using a dynamic spatio-temporal graph convolution network to capture spatio-temporal information from time-series data. By extracting features from two different modalities, improved predictive performance can be achieved. To demonstrate the effectiveness of the proposed model, experiments were conducted on two real-world datasets. The results show that the Res-GCN model effectively extracts multi-modal features, significantly enhancing the accuracy of multi-step predictions. Compared to the best-performing baseline model, the multi-step prediction's mean absolute error, root mean square error, and mean absolute percentage error increased by approximately 6%, 7%, and 7%, respectively. [ABSTRACT FROM AUTHOR]