Search

Hydrogen fuel is a non-toxic and source-abundant energetic system, but for its applications in the industry, several issues related to its storage must be resolved. Compounds like NaBH 4 appear as promising hydrogen sources, while can release the latter rapidly under controllable conditions with the use of heterogeneous catalyst systems. In this work, we synthesized a Ni–CoP catalyst by electrodeposition in a three-step process on carbon paper as support. The materials were characterized via SEM-EDS, XRD, and XPS techniques, while the hydrogen evolution reaction (HER) from alkaline NaBH 4 solutions was tested as a batch experiment. Ni–CoP catalyst showed a high amount of H 2 generated in a short time (∼550 mL in 1 min) and remained at 78 and 54% of its initial performance after respectively 100 and 300 h of a continuous hydrolysis process. Our catalyst revealed exceptional performance and stability at higher temperatures and a long process time, which have been a rare subject of investigation in other reports for NaBH 4 hydrolysis in the past. This work paves a new perspective in studying catalysts for hydrogen generation from borohydrides. [Display omitted] • Ni–CoP catalyst was electrodeposited on a carbon support. • Material characterization proved the formation of desired active layers. • High efficiency and stability of the catalyst for a long-term NaBH 4 hydrolysis was revealed. [ABSTRACT FROM AUTHOR]

In recent years, the catalyst efficiency of hydrogen evolution reaction (HER) has been extensively studied. However, the stability of catalysts at high current densities is still a challenge. Herein, layered Ni−Co−P was electrodeposited on carbon fiber paper (CFP) via cyclic voltammetry (CV). This low‐cost electrode exhibits high efficiency and excellent durability for HER in 1 M KOH. To achieve current densities of 10, 100, 500, and 1000 mA cm−2, Ni−Co−P/CFP required overpotentials of 49, 95, 170, and 295 mV, respectively. The layered structure allows the catalyst to fall off layer by layer. After the outer layer of catalyst falls off, the inner layer of catalyst will be exposed to continue working. After 300 h of HER at 1000 mA cm−2, Ni−Co−P/CFP still has a regular morphology and high efficiency. Our work shows that layered Ni−Co−P/CFP has excellent prospects for practical applications. [ABSTRACT FROM AUTHOR]

Hydrogen (H2) is a new type of renewable energy that can meet people's growing energy needs and is environmentally friendly. In order to improve the industrial application prospects and electrochemical performance of hydrogen evolution catalysts, extensive research on transition metal materials has been carried out. Among the many catalytic materials, cobalt is an element with potential for the hydrogen evolution reaction (HER) due to its abundant reserves, low cost, and small energy barrier for H adsorption. This review classifies the latest research on cobalt-based catalysts according to the types of compound, including cobalt-based sulfides, phosphides, carbides, borides, oxides, etc., and summarizes the latest research progress of cobalt-based compound catalysts in acidic and alkaline media. Strategies to tune the properties of cobalt-based compound catalysts for high catalytic activity for HER are focused on, including structural engineering, defect engineering, and doping, etc. The advantages and limitations of each modified approach are reviewed. Not only that, but also the catalytic activity and advantages of the catalyst are evaluated by using density functional theory (DFT) calculation-related descriptors, activity evaluation parameters, etc. Finally, limitations and challenges of cobalt-based materials for HER are presented, as well as prospects for future research. This paper aims to understand the chemical and physical factors that affect cobalt-based catalysts, and to find directions for future research on cobalt-based catalysts. [ABSTRACT FROM AUTHOR]

Summary: Catalysts with cobalt (Co) and graphitic carbon hybrid structure are receiving significant attention in various electrocatalysis applications because of their stability and high activities. In addition, the size and the well dispersed distribution of metal active site are some of the most important factors for electrocatalyst. In this paper, we successfully synthesized ultra‐small and well dispersed Co nanoparticle on nitrogen‐doped carbon structure (Co/NC) adding and evaporating a Zinc (Zn) and found the optimized ratio of Co and Zn. We used a bottom‐up method to synthesize catalysts with Co on carbon substrate structure from zeolitic imidazolate frameworks (ZIF). Zinc (Zn) was also added and evaporated by pyrolysis. By addition and evaporation of Zn, Co nanoparticle became smaller and more evenly dispersed. As a result, the OER performance was significantly improved than the catalyst without Zn. Also, an optimized catalyst with abundant uniformly dispersed Co was successfully synthesized by appropriately controlling the ratio of Co and Zn comprising the ZIFs. As the ratio of Zn increased, the size and the amount of Co nanoparticles were decreased, and Co nanoparticles were more evenly dispersed. Furthermore, carbon substrate has more porous structure due to the evaporation of Zn atoms. When the Co:Zn ratio was 1:3, Co/NC showed the best electrocatalytic performance due to optimized active sites and large surface area. The optimized Co/NC showed an overpotential of 1.56 V (vs RHE) to acquire a current density of 10 mA cm−2, which is higher activity than commercial RuO2. We also analyzed the material characterization occurred as the ratio of Zn in ZIF increased, revealing the factors enhancing the OER activity. Optimized Co/NC (Co:Zn = 1:3) exhibited improved OER activity and long‐term and cycle stability in the OER. [ABSTRACT FROM AUTHOR]

Over the course of a few decades, the concern of environmental damages of fossil fuels, an increase in CO 2 emission and a decrease of hydrogen have been growing more and more. Accordingly, hydrogen production is a crucial issue nowadays. Different polymers are applied to attain the purpose. Among all polymers, biodegradables polymers are the best choices to develop the main aim. Polysaccharides and proteins are biodegradable polymers with unique places and advantages with regards to their ecofriendly properties. There are different techniques to apply and achieve the foremost purpose. It is worthwhile to mention that green and facile methods are always attracting attention in different aspects and fields. The three non-polluting and economical techniques, that is, electrochemical hydrogen evolution reaction (HER), photocatalytic technique, and hydrolysis of hydrides, are reviewed in this paper. This review helps researchers, who are environment supporters, to evaluate and choose the most ecological biopolymers and processes in their work. [Display omitted] • Developments in hydrogen evolution by biopolymer-derived (nano)catalysts have been described. • Summary of synthetic procedures to obtain biopolymer-derived (nano)catalysts. • Future challenges of hydrogen evolution using biopolymer-derived (nano)catalysts have been discussed. [ABSTRACT FROM AUTHOR]