Search

This technical note describes in detail a method for associating individual sheets of blank A4 white paper from the same ream by the physical fit of machine‐cut edges. A large‐scale laboratory trial involving ~700 sheets of paper from 24 different reams (plus one spoiled sample), and more than 20,000 potential physical fits, correctly associated and sequenced 219 pairs of sheets together with a 100% empirical success rate and no false associations. The edge profile of each short machine‐cut end of a sheet of A4 paper allows us to physically fit sheets of paper from the same ream to each other and use this to predict the sequence of sheets in a set of documents. In a real‐life scenario, it may now be possible to detect the substitution or addition of a sheet in a multipage document, link documents from different sources to each other or to a common source of paper (e.g. to paper from a seized printer or from an accused's address) or to date documents. The study provides data for the application of this method in forensic casework and supports the practitioner when forming conclusions in this type of case. [ABSTRACT FROM AUTHOR]

In the realm of food waste recycling, industrial suberoligneous by‐products like cork and peels, pose a challenge for value‐added conversion, primarily due to their intricate structures. This study introduces an innovative approach by utilizing recycled cork as a prime example of repurposing food waste to create a reusable and durable packaging paper. Notably, the manufacturing process of this cork‐based paper avoids the generation of waste liquids from lignin removal, effectively alleviating concerns related to liquid waste pollution. The resulting packaging paper demonstrates remarkable printability, readability, and erasability while offering reusability. Its performance can be fine‐tuned through pH value adjustments. Moreover, this packaging paper exhibits outstanding antioxidative properties and barrier properties, seamlessly integrating superb UV‐blocking proficiency and heightened visible transparency, rendering it highly appealing for sustainable food packaging applications. [ABSTRACT FROM AUTHOR]

Atmospheric pressure plasma polymerization represents a promising coating technology, addressing drawbacks of traditional processes (solvent use, multistep procedures, etc.) while enabling deposition of thin cross‐linked polymer layers with high contour fidelity. We address technological challenges with a novel plasma device that integrates multiple plasma source benefits and investigate the suitability of two plant‐based precursors, chia and tung oil, for plasma polymerization to hydrophobize glass and paper. Chia oil enables the deposition of thin, covalently bonded hydrophobic polymer layers. Such coatings have diverse applications especially inside the paper industry, where water repellents in the form of internal and surface sizing have always been an essential functionalization step. Using bio‐based precursors and reducing extra chemicals contributes to substituting fossil‐based or harmful substances. [ABSTRACT FROM AUTHOR]

Paper manufacturers have long used silicone as the coating agent for release liners. However, silicone‐based release paper is very difficult to recycle due to covalent bonds between silicone and fibers. The most suitable solution to overcome this problem is to use alternative coating materials with adequate release properties, provided that they can be easily repulped in typical paper recycling facilities. We proposed a coating agent composed of phosphate esters and dimethylacetamide in order to manufacture a recyclable and efficient release paper. Analyses carried out on coated sheets showed that phosphate esters allowed the formation of a surface with adequate release properties (low peeling force and surface free energy). In addition, the residual adhesion values obtained with phosphate esters confirmed that they are well anchored on the backing paper surface, thus limiting the mass transfer to the adhesive tape. [ABSTRACT FROM AUTHOR]

Accurately assessing the color quality of printed products becomes intricate when optical brightening agents (OBAs) are introduced in papers, as diverse interactions occur among different ink pigments and papers containing OBAs due to variations in ink formulation chemistries. Specifically, alkali‐based pigments, commonly used as spot colors, are carefully formulated to ensure consistency across production batches. The presence of OBAs, which absorb ultraviolet light and emit it in the visible spectrum, significantly affects color perception and accuracy on paper when interacting with these inks. This research marks an initial investigation into how OBAs in paper influence the color accuracy of five distinct alkali‐based spot color paste inks using a Little Joe ink proofer. The research examines the physical, optical, and colorimetric characteristics of two paper samples‐one with OBA and one without‐ and analyzes the colorimetric changes occurring during the ink drying process. The results indicate that reflex blue, purple, and violet spot colors achieved acceptable delta E (ΔE00) value of below 3 on non‐OBA paper, with rubine red being on the borderline at 3.1 after 48 h. In contrast, purple, rhodamine red and violet achieved acceptable ΔE00 below 3 on high OBA paper. The distinct behavior exhibited by certain inks led to the conclusion that achieving a consistent proofing procedure across diverse alkali‐based ink formulations is impractical. [ABSTRACT FROM AUTHOR]

The global overabundance of electronic waste and ever‐increasing concerns regarding the energy‐and material‐intensive manufacturing processes associated with traditional electronics are driving the development of solution‐processed, degradable electronics. Of note, the industry‐dominating prevalence of harmful lead‐based materials in sensing and actuating devices drives the push for more eco‐friendly solution‐processed piezoelectric systems. Yet current ecofriendly multi‐material printing processes are limited by both the conventional challenges of multilayer processes as well as the low‐temperature thermal constraints of biodegradable materials. Herein, a novel approach for fabricating fully printed, sustainable piezoelectric transducers on paper substrates is presented. Low‐temperature screen‐printing processes are used to integrate non‐toxic KNbO3 layers with degradable carbon‐ or zinc‐based conductive inks into devices. The influence of electrode material on device characteristics is assessed, with effective piezoelectric coefficients reported as high as 4.6 pC N−1 and 5.1 pC N−1 for devices with carbon and zinc electrodes respectively. The potential of the developed technology is then demonstrated through the first‐ever instance of fully printed piezoelectric force sensors and acoustic speakers comprised entirely of green materials. By demonstrating entirely printable green piezoelectric devices compatible with various electrode materials, this work serves as a step towards developing more complex sustainable piezoelectric technologies in the future. [ABSTRACT FROM AUTHOR]

Identifying the factors that influence the citation of articles helps authors improve the impact and reach of their research. Analysis of publications in the Journal of Fish Biology between 2008 and 2021 revealed that variables such as the number of keywords, abstract length, number of authors, and page length were associated with higher impact papers. These trends applied to both review and regular papers. These findings suggest that papers that are more informative, have higher numbers of authors, and have more keywords are more likely to be cited. Adoption of some simple "best‐practice" behaviors can improve the likelihood that a paper is cited. [ABSTRACT FROM AUTHOR]

The global overabundance of electronic waste and ever‐increasing concerns regarding the energy‐and material‐intensive manufacturing processes associated with traditional electronics are driving the development of solution‐processed, degradable electronics. Of note, the industry‐dominating prevalence of harmful lead‐based materials in sensing and actuating devices drives the push for more eco‐friendly solution‐processed piezoelectric systems. Yet current ecofriendly multi‐material printing processes are limited by both the conventional challenges of multilayer processes as well as the low‐temperature thermal constraints of biodegradable materials. Herein, a novel approach for fabricating fully printed, sustainable piezoelectric transducers on paper substrates is presented. Low‐temperature screen‐printing processes are used to integrate non‐toxic KNbO3 layers with degradable carbon‐ or zinc‐based conductive inks into devices. The influence of electrode material on device characteristics is assessed, with effective piezoelectric coefficients reported as high as 4.6 pC N−1 and 5.1 pC N−1 for devices with carbon and zinc electrodes respectively. The potential of the developed technology is then demonstrated through the first‐ever instance of fully printed piezoelectric force sensors and acoustic speakers comprised entirely of green materials. By demonstrating entirely printable green piezoelectric devices compatible with various electrode materials, this work serves as a step towards developing more complex sustainable piezoelectric technologies in the future. [ABSTRACT FROM AUTHOR]

The research presented in this paper introduces a novel environmental energy‐harvesting technology that harnesses electricity from the evaporation of water using porous structural materials. Specifically, a strategy employing paper‐based hydroelectric generators (p‐HEGs) is proposed to capture the energy produced during water evaporation and convert it into usable electricity. The p‐HEGs offer several advantages, including simplicity in fabrication, low cost, and reusability. To evaluate their effectiveness, the water evaporation‐induced electrical output performance of four different p‐HEGs are compared. Among the variants tested, the p‐HEG combining wood pulp and polyester fiber exhibits the best output performance. At room temperature, this particular p‐HEG generates a short‐circuit current and open‐circuit voltage of ≈0.4 µA and 0.3 V, respectively, thereby demonstrating excellent electrical stability. Furthermore, the electrical current and voltage generated by the p‐HEG through water evaporation are able to power an LED light, both individually and in series and parallel connections. This study delves into the potential of electricity harvesting from water evaporation and establishes it as a viable method for renewable energy applications. [ABSTRACT FROM AUTHOR]

This work reports on a facile 96‐microwell paper‐based colorimetric sensor array device (PCSAD) for highly accurate pH detection toward sweat analysis. Although a pH test strip has been widely used to easily visualize pH conditions with naked eyes, its accuracy to guarantee below the decimal point in pH changes has still been a concern. In contrast, the PCSAD could detect slight pH changes because of abundant chemical information by the array design. The color gradients on the PCSAD upon changing pH conditions can be rapidly recorded by a flatbed scanner. The captured digital images of the PCSAD were treated with imaging analysis, followed by extraction of color intensities for inset data. By employing the partially overlapped detectable pH ranges of pH indicators, seamless inset data was obtained. Therefore, the PCSAD successfully discriminated against slight changes in pH conditions in human sweat with high accuracy by pattern recognition methods. [ABSTRACT FROM AUTHOR]

Most methodologies to measure the moisture‐induced deformation (hygro‐expansion) of paper microconstituents, including fibres and interfibre bonds, are low resolution or time‐consuming. Hence, here, a novel method is proposed and validated to measure high‐resolution full‐field strain maps of paper microconstituents during hygro‐expansion, based on environmental scanning electron microscopy (ESEM). To this end, a novel climate stage enables accurate control of the relative humidity (RH) near the specimen in the ESEM from 0%–100%. The fibre surface, which is decorated a priori with a microparticle pattern, is captured during RH change. Subsequently, correlating the fibre surface using a dedicated global digital image correlation algorithm enables high‐resolution hygro‐expansion strain maps. Method optimisation involved performing contrast enhancement, scan‐correction to reduce ESEM artefacts and a background correction, resulting in a strain resolution of 6·10−4. Method validation revealed that the fibres' crystallinity is affected by the electron beam, even for minimal invasive electron beam settings. Interestingly, however, the fibres consistently exhibit conventional hygro‐expansion behaviour during the drying slopes. Using the optimised procedure, hygro‐expansion characterisation of two interfibre bonds and four interfibre bond cross‐sections revealed the competition between the low longitudinal and large transverse fibre hygro‐expansion in the bonded area. [ABSTRACT FROM AUTHOR]

Four photochromic spiropyran‐amylose (ASP) biobased polymers with different spiropyran (SP) grafting density, DS, ASP10 (DS = 0.12), ASP40 and ASP40PA60 (DS = 0.40), and ASP100 (DS = 0.97), are synthesized through azide‐alkyne cycloaddition of an alkynyl‐functional SP derivative onto C6‐azidated‐amylose (AN3), where the unconverted azide in ASP40PA60, ASP100, and the AN3 precursor are quenched by clicking with propargyl alcohol (PA). All ASPs are poorly soluble in trifluoroethanol, ethanol, and water but soluble in dimethyl sulfoxide, N,N‐dimethylformamide, and hexafluoroisopropanol irrespective of UV irradiation, switching reversibly the grafted SP into zwitterionic merocyanine (MC). Only ASP10 and ASP40 are slightly soluble in the low polarity tetrahydrofuran, with ASP40 showing a marked photochromism and reduction of solubility on SP→MC switching. The photochromism in solution is preserved in the solid state, although with significant differences between the still relatively fast SP→MC photoisomerization and the much slower thermal retro‐isomerization. The dynamics of both processes, evaluated in a thin spin–coated ASP100 film and a thicker ASP40 photoswitchable coating on glass and paper, is more clearly affected than in solution by the grafting density. Switching the nearly apolar SP into the zwitterionic MC does not significantly affect wettability of the slightly hydrophobic ASP40 coating. [ABSTRACT FROM AUTHOR]

Automated color measurement systems have become significant components of offset lithographic printing presses for better process control and reduced job waste. Some European press manufacturers are known to offer automated color measurement equipment that is confined to polarized density readings, which is uncommon in US. Introducing polarized densitometry into an environment where unpolarized densitometry is utilized can be problematic. Print professionals are on the lookout for a solution that is evidenced by a recent feature in a post from the IDEAlliance G7 Professionals forum seeking for a methodology to convert polarized to unpolarized readings. The present study applies the Bland–Altman method together with other statistical analyses to determine if a conversion between polarized and unpolarized densitometry can be established within a limited set of parameters. Three spectrodensitometers were used to record densitometric readings of wet and dry process inks on coated and uncoated drawdown proofs. The results showed that coated papers had significantly less variation between instruments compared to uncoated papers. Wet inks had more minor variations compared to dry inks. Furthermore, pure difference values and a Mann–Whitney U test indicated differences between unpolarized and polarized densitometric readings in all cases. Finally, t‐tests performed on the resulting difference data for both unpolarized versus polarized and unpolarized versus predicted polarized that showed fixed bias by means of the computed p‐values. [ABSTRACT FROM AUTHOR]

TiO2 nanoparticles can improve the electrical performance of oil paper insulation. In this study, 10 nm TiO2 nanoparticles were prepared and dispersed into transformer oil, and then immerse pressboards in it to obtain nanofluid impregnated pressboards (NP). Its thermal aging was accelerated together with the reference sample at 130°C for 36 days. Analyzing the acid value in the oil, polymerization degree, surface topography, AC breakdown strength, surface flashover characteristics and surface potential decay characteristics. It was observed that TiO2 nanoparticles can reduce the acid value and improve AC breakdown strength of oil. However, the degree of polymerization and surface appearance of NP and oil impregnated pressboards (OP) during thermal aging did not differ significantly. During the aging process, the energy level of pressboard surface traps shifted first towards the shallow and then gradually towards the deep. During all the aging stages, the surface flashover voltage of NP was always higher or close to that of OP. The mechanism of TiO2 nanoparticles improving the breakdown and surface flashover characteristics of oil–paper insulation during thermal aging is discussed from the perspective of water molecules and aging by‐products adsorption and introduction of shallow traps by nanoparticles. [ABSTRACT FROM AUTHOR]

The fabrication of the Screen‐Printed Electrode (SPE) was performed using the graphite ink to print the working (WE) and counter electrodes (CE), and silver/silver chloride path as reference electrode (RE). All the electrodes are printed in a paper substrate using screen‐printing technique. The resulting SPE is characterized using scanning electron microscopy, showing all the ink layer, and subsequently optimized. The paper sample presented the cellulose fibers entanglement, extremely rough, with highly porous network. Then the graphite ink was deposited and the surface became flat, thinner and very smooth. When the silver ink was painted on top of the graphite ink, the spherical silver particles, ranged from 2–3.5 μm in size, were observed. And finally, the silver ink was covered with a AgCl layer and the particle size becomes larger with an irregular sphere‐like phase. The images showed that the layers appear to be homogeneously distributed with good coverage. Then fabrication process was optimized concerning type of paper, the sanding process, the hydrophobic barrier, the electrode design and size. In summary, the optimized values included using the previously sanded matte paper with a mineral spirit layer. The design and size of the electrode were also tested to achieve the best electrochemical performance (design 3 with 3.5 cm). The final SPE was a miniaturized and flexible paper‐based electrochemical electrode. In order to evaluate the electrical properties, the ohmic resistance of each ink was tested using a multimeter and the obtained values were 2.18 kΩ for the graphite ink, 2.27 Ω for the silver ink and 38.33 kΩ for the silver/silver chloride ink. That can indicate the good conductivity of each ink used in the fabrication of the electrode and the correct deposition of Ag/AgCl. Finally, the electrode was used to measure the electrochemical response of K4[Fe(CN)6] in different concentrations. Then a calibration curve was obtained from the voltammograms and a linearity was observed between the current and concentration in the range of 0.50–2.00 mM. That indicates that the SPE has potential to be used as a voltammetric electrode. [ABSTRACT FROM AUTHOR]

BACKGROUND: Deinking is an important part of paper recycling that involves the removal of ink particles from the paper fibres. This industrial process is important so that the fibres can be recirculated back into paper production, which enables better sustainability as fewer fresh fibres are needed. In this study, we examined five different alternative fibre materials from different agricultural residues and industrial processes for the pilot production of papers. Papers containing fibres from invasive plants (Japanese knotweed), dedicated crops (miscanthus, acacia), agricultural residues (tomato stems), and industrial waste (jute - fibres from coffee bags) were printed with water-based flexo inks and deinked with two separate processes (chemical and enzymes). Mechanical (break and tensile index, breaking length) and optical properties (ISO whiteness, brightness and CIE L*a*b* values) were measured and ink elimination IR700 and deinking efficiency was calculated for the two deinking processes. RESULTS: Enzymatic treatment improved the mechanical properties of deinked pulp in comparison with the classic chemical treatment. Mechanical strength for almost all papers increased slightly (breaking length up to 20% in tomato and jute), and the optical result (brightness) increased similarly for both processes due to the bleaching action of the colour-shaded samples, whereas the deinking efficiency showed mixed results between chemical- and enzyme-type deinking (with chemical achieving better elimination measured at 700 nm) in the typical range of ink elimination values (15-35%) for flexographic inks. This indicates further optimization of the deinking with enzymes is needed due to different alternative fibre compositions and variations of residues in the delignification processes. CONCLUSION: Using a combination of adjusted enzymatic treatment as a precursor for deinking of paper-based packaging materials sourced from alternative fibres showed promising results regarding mechanical properties, whereas the optical properties need to be improved with cellulase optimization or by using mixes of different enzymes. These kinds of paper materials printed with flexo inks were found to be successfully deinkable with the chemical ISO-based deinking protocol. [ABSTRACT FROM AUTHOR]

We propose a printed 384‐well microtiter paper‐based fluorescent chemosensor array device (384‐well microtiter PCAD) to simultaneously categorize and discriminate saccharides and sulfur‐containing amino acids for food analysis. The 384‐well microtiter PCAD requiring 1 μL/4 mm2 of each well can allow high‐throughput sensing. The device embedded with self‐assembled fluorescence chemosensors displayed a fingerprint‐like response pattern for targets, the image of which was rapidly captured by a portable digital camera. Indeed, the paper‐based chemosensor array system combined with imaging analysis and pattern recognition techniques not only successfully categorized saccharides and sulfur‐containing amino acids but also classified mono‐ and disaccharide groups. Furthermore, the quantitative detectability of the printed device was revealed by a spike and recovery test for fructose and glutathione in a diluted freshly made tomato juice. We believe that the 384‐well microtiter PCAD using the imaging analysis system will be a powerful sensor for multi‐analytes at several categorized groups in real samples. [ABSTRACT FROM AUTHOR]

Nanocellulose has received enormous scientific interest for its abundance, easy manufacturing, biodegradability, and low cost. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) are ideal candidates to replace plastic coating in the textile and paper industry. Thanks to their capacity to form an interconnected network kept together by hydrogen bonds, nanocelluloses perform an unprecedented strengthening action towards cellulose‐ and other fiber‐based materials. Furthermore, nanocellulose use implies greener application procedures, such as deposition from water. The surface chemistry of nanocellulose plays a pivotal role in influencing the performance of the coating: tailored surface functionalization can introduce several properties, such as gas or grease barrier, hydrophobicity, antibacterial and anti‐UV behavior. This review summarizes recent achievements in the use of nanocellulose for paper and textile coating, evidencing critical aspects of coating performances related to deposition technique, nanocellulose morphology, and surface functionalization. Furthermore, beyond focusing on the aspects strictly related to large‐scale coating applications for paper and textile industries, this review includes recent achievements in the use of nanocellulose coating for the safeguarding of Cultural Heritage, an extremely noble and interesting emerging application of nanocellulose, focusing on consolidation of historical paper and archaeological textile. Finally, nanocellulose use in electronic devices as an electrode modifier is highlighted. [ABSTRACT FROM AUTHOR]

The absolute dating of documents is still one of the most important challenges for forensic document examiners (FDE). The potential difference between the date on a questioned document and the actual year of production of the used paper can be only 1 to 5 years. Until now, there was no analytical method with this accuracy available. This study demonstrates a method for an absolute dating of paper by using the 14C bomb peak and dating the starch in the paper. Accelerator mass spectroscopy (AMS) radiocarbon measurements were performed on starch extracts and cellulose fibers from 50 paper samples with known production year from 1950 to 2018. For most of the paper samples, the measured 14C concentration values in the starch extracts were highly correlated with the data of the 14C bomb peak calibration curve. The differences between the calibrated ages and the actual harvest years of the starch‐containing plants were only up to 3 years. The 14C concentration in the paper fibers showed a lower but significant correlation with the production year of the papers and can be used to support the dating results of the starch extracts. In order to secure the accuracy of the dating, aside from the radiocarbon measurements of the extracted starch other analytical methods or data are used, like a detailed chemical analysis of the paper composition including fiber composition and the spectroscopic analysis of the purity of the starch extracts. In practice, only starch extracts without contaminations are used for the paper dating. [ABSTRACT FROM AUTHOR]

Laser‐induced graphene (LIG) produced by irradiation of paper (paper‐LIG)holds substantial promise for flexible devices. This article presents paper‐LIG humidity and temperature sensors fabricated by single‐step irradiation of common filter paper with a pulsed UV laser (355 nm). The influence of the process parameters on the conversion of cellulose fibers into LIG is discussed based on the resulting morphology, structure, conductivity, and chemical composition, revealing a distinct barrier to transformation and a propagation behavior not seen under CO2 laser irradiation. The obtained material is constituted by a porous, electrically conductive network of fibers. The paper‐LIG relative humidity (RH) and temperature sensors with sensitivities of up to 1.3 × 10−3%RH−1 and ‐ 2.8 × 10−3 °C−1, respectively, are examined in terms of their linearity, reproducibility, and response time. A detailed discussion on the response mechanism is presented in the context of literature, pointing towards the absorption of water molecules in the interlayer spacing of graphene as the main reason for the increase in resistance with RH. Additionally, a contribution from variable range hopping along the ab plane of graphene at high RH is suggested. These results demonstrate the potential of paper‐LIG for low‐cost, sustainable, and environmentally friendly sensing. [ABSTRACT FROM AUTHOR]

A precisely formulated research question is becoming increasingly important within the humanities. This applies not only to research funding applications, but also to articles, papers, and student theses. This article presents a tool allowing students to develop research questions on their own, which is open enough to allow for a wide variety of research questions, while still giving users sufficient guidance to formulate a precise question. It also offers a concrete roadmap for students to use in developing their research question. [ABSTRACT FROM AUTHOR]

The main insulation structure of the valve‐side winding of converter transformer bears the effect of AC and DC superimposed voltage during operation. The electric field intensity in the pressboard is much higher than that in the pressboard in the AC transformer. This condition increases the probability of failure of insulation structure. Therefore, the design and optimization of the main insulation structure of the valve‐side winding are keys to ensure the stable operation of converter transformer. This study establishes a model of the main insulation structure of the valve‐side winding of the ±1100 kV converter transformer. The influence of the insulating oil–paper configuration on the electric field distribution of the main insulation structure of the valve‐side winding is analysed, and then, an optimization idea is proposed. The oil–paper configuration includes two aspects: oil–paper insulation structural design and combination selection, that is, the influence of typical oil–paper structural design parameters and the aging state of different oil–paper combinations on the electric field distribution. Finally, the optimization idea of the oil–paper configuration for valve‐side winding of converter transformer is obtained, and the established model is optimized. [ABSTRACT FROM AUTHOR]

The object of this study is unusual for both its material and technique. It is an oil painting on sheets of paper glued to a canvas made of linen fibres, thereby showing some execution peculiarities. It depicts the Virgin of Thessalonica in a hieratic attitude. The painting is attributed to the Salento‐born artist Giuseppe Verrio (1639) for the church of the Theatine religious Order in Lecce, Italy, in which it is still placed, on the left altar of the transept. To truly understand and appreciate a work of art, it is important to have a basic knowledge of the materials and techniques used by the artist. For a better understanding of the execution techniques and to study the original materials and those that have been added over time, the painting was examined using the following analytical techniques: microscopic examination of cross‐sections, μ‐Raman spectroscopy and pyrolysis gas chromatography‐mass spectrometry (Py‐GC‐MS). The data indicate that Verrio used different earthy, mineral and manufactured pigments, an organic dye used only on the paper, oil as a binder, and varnish as a protectant. The results demonstrate that the latter are both original and due to a subsequent restoration. [ABSTRACT FROM AUTHOR]

Purpose: We aimed to test the accommodative lag and mechanical tension theories for myopia by assessing the influence of the lag of accommodation on axial elongation by using three different near targets that are known to influence the accommodative response differently. Methods: Forty‐two young adults were recruited for the study. Axial length was measured using a non‐contact biometer, before and immediately after a 15 minute visual task, with one of the three near targets placed 20 cm from the eye: reading text from a paper, reading text from a smartphone and watching a video on a smartphone. The accommodative response was determined using an open‐field autorefractor while the participants viewed the near target monocularly. Results: Lag of accommodation was significantly different for the three tasks: watching a video (mean ± standard error of the mean [SEM] 0.92 ± 0.10 D); reading text on the smartphone (0.59 ± 0.08 D); and reading text on paper (0.24 ± 0.09 D). There was a significant (p < 0.05) increase in axial length after reading text from a paper (10.5 ± 1.9 µm after 15‐min) and reading text from a smartphone (5.2 ± 2.7 µm), but not after watching a video on a smartphone (−0.5 ± 1.7 µm, p = 0.47). Vitreous chamber depth increased significantly more with the reading tasks compared with watching a video (reading text from a paper and smartphone: 33.9 ± 4 µm and 31.7 ± 4 µm vs. watching a video on a smartphone: 14.6 ± 5 µm, p = 0.001). Conclusion: Greater changes in axial length associated with the low lag of accommodation failed to support the theory that lag of accommodation during visual tasks could be the trigger for axial elongation. Reading on paper and smartphone at the closest reading distance may stimulate high accommodative demand and axial elongation as a consequence, possibly due to increased "ciliary muscle tension" during accommodation. [ABSTRACT FROM AUTHOR]

Indeed, the printed 384-well microtiter paper-based fluorescent chemosensor array system combined with imaging analysis and pattern recognition techniques successfully not only categorized saccharides and sulfur-containing amino acids but also classified mono- and disaccharide groups. Paper, sensors, pattern recognition, self-assembly, food analysis Keywords: paper; sensors; pattern recognition; self-assembly; food analysis EN paper sensors pattern recognition self-assembly food analysis 1 1 1 08/19/22 20220815 NES 220815 B A facile paper-based device b embedded with self-assembled fluorescent chemosensors displayed a fingerprint-like response pattern for targets, the image of which was rapidly captured by a portable digital camera. [Extracted from the article]