Search

Furfural residues (FRs) were pretreated with ethanol and a green liquor (GL) catalyst to produce fermentable sugar. Anthraquinone (AQ) was used as an auxiliary reagent to improve delignification and reduce cellulose decomposition. The results showed that 42.7% of lignin was removed and 96.5% of cellulose was recovered from substrates pretreated with 1.0 mL GL/g of dry substrate and 0.4% (w/w) AQ at 140 °C for 1 h. Compared with raw material, ethanol–GL pretreatment of FRs increased the glucose yield from 69.0% to 85.9% after 96 h hydrolysis with 18 FPU/g-cellulose for cellulase, 27 CBU/g-cellulose for β-glucosidase. The Brauner–Emmett–Teller surface area was reduced during pretreatment, which did not inhibit the enzymatic hydrolysis. Owing to the reduced surface area, the unproductive binding of cellulase to lignin was decreased, thus improving the enzymatic hydrolysis. The degree of polymerization of cellulose from FRs was too low to be a key factor for improving enzymatic hydrolysis. [ABSTRACT FROM AUTHOR]

Furfural residues (FRs) were pretreated with laccase or a laccasemediator (1-hydroxybenzotriazole, HBT) system to produce fermentable sugar for bioethanol production. Compared to laccase-only pretreatment, laccase-mediator pretreatment dissolved more lignin. Approximately 10.5% of the initially present lignin was removed when FRs were treated with a laccase loading of 100 U/g of dry substrate in 1% (w/w) HBT at 48 °C for 24 h in an acetate buffer (pH 4.8). The enzymatic saccharification process was carried out by a combined laccase or laccase-mediator pretreatment without washing of the treated solids. The results showed that active laccase had a negative effect on the rate and yield of enzymatic hydrolysis. Laccase-oxidized HBT seriously reduced glucose yield. However, non-oxidized HBT increased glucose yield when laccase was deactivated at 121 °C for 20 min prior to enzymatic hydrolysis. The highest glucose yield, 80.9%, was obtained from the substrate pretreated with 100 U/g of dry substrate laccase and 1% (w/w) HBT at 48 °C for 24 h in an acetate buffer (pH 4.8). Furthermore, the structures of FRs before and after laccase-mediator pretreatment were characterized by scanning electron microscopy (SEM) and Fourier Transform Infrared spectroscopy (FT-IR). [ABSTRACT FROM AUTHOR]

The article presents a study which compared the bioethanol production from the furfural residue (FR) samples after delignification pretreatment. The relationship between hydrophilicity of the samples and bioethanol production was determined by measuring hydrophilic variation through conductometric titration. Results suggest that some new hydrophilic groups were formed during pretreated delignification which could benefit enzymatic hydrolysis.