Search

The ship-generated waves in restricted waterways can influence the behavior of sediment resuspension and bank erosion. This paper explores the case study considering the effect of ship-generated waves in restricted channels. A fully nonlinear Boussinesq model (FUNWAVE-TVD) is used to simulate the ship-generated waves. The sediment transport model adopted in FUNWAVE has been changed to incorporate the modified diffusion coefficients, deposition flux, and an explicit equation for settling velocity and critical shield parameter. The sediment transport model was validated against the experimental results of solitary waves in a wave tank, and model performance in shoreline geometry was reported. The implementation of the moving vessel in the numerical model and its impact on suspended sediment concentration were evaluated against the field measurements in the Falta stretch of the Hooghly river in Indian National Waterway 1. The error value in predicting the depth-averaged suspended sediment concentration by the FUNWAVE module was 97.6%, which has been significantly reduced to 16.3% based on the present modification. The parametric study of the ship waves in a typical restricted waterway of India revealed that the concentration of the sediments gradually decreases from the navigation channel to the river banks due to dissipation in the ship waves. The change in wave height and depth-averaged sediment concentration increases with the increasing depth Froude number. Finally, the impact on sediment transport due to different scenarios, such as the movement of two vessels in close proximity, the passage of vehicles coming from the opposite direction on the navigation channel, the influence of small draft vessels, and the bed morphology changes due to the multiple vessel movements are analyzed and reported. [ABSTRACT FROM AUTHOR]

The ship-generated waves in restricted waterways can influence the behavior of sediment resuspension and bank erosion. This paper explores the case study considering the effect of ship-generated waves in restricted channels. A fully nonlinear Boussinesq model (FUNWAVE-TVD) is used to simulate the ship-generated waves. The sediment transport model adopted in FUNWAVE has been changed to incorporate the modified diffusion coefficients, deposition flux, and an explicit equation for settling velocity and critical shield parameter. The sediment transport model was validated against the experimental results of solitary waves in a wave tank, and model performance in shoreline geometry was reported. The implementation of the moving vessel in the numerical model and its impact on suspended sediment concentration were evaluated against the field measurements in the Falta stretch of the Hooghly river in Indian National Waterway 1. The error value in predicting the depth-averaged suspended sediment concentration by the FUNWAVE module was 97.6%, which has been significantly reduced to 16.3% based on the present modification. The parametric study of the ship waves in a typical restricted waterway of India revealed that the concentration of the sediments gradually decreases from the navigation channel to the river banks due to dissipation in the ship waves. The change in wave height and depth-averaged sediment concentration increases with the increasing depth Froude number. Finally, the impact on sediment transport due to different scenarios, such as the movement of two vessels in close proximity, the passage of vehicles coming from the opposite direction on the navigation channel, the influence of small draft vessels, and the bed morphology changes due to the multiple vessel movements are analyzed and reported. [ABSTRACT FROM AUTHOR]

Resuspension and redistribution of sediments induced by propeller wash may significantly influence aquatic ecosystems at contaminated sediment sites. This study describes a numerical modeling method developed to predict the sediment resuspension and subsequent transport processes resulting from ship traffic, with a fully coupled simulation of hydrodynamics, sediment transport, and propeller wash. By including propeller momentum effects in the flow field computation, the advection and dispersion of resuspended sediments are better represented than in previously available methods. To achieve this improvement, a computational algorithm was first developed to calculate the propeller wash effects from one or more ships (e.g., erosion rate and momentum flux); these results were then dynamically linked to a hydrodynamic and sediment transport computation using Environmental Fluid Dynamics Code Plus (EFDC+). This modeling framework was evaluated using a field experiment conducted by the US Navy. The model was calibrated with flow velocities and sediment erosion depths, and then validated with resuspended sediment concentrations in the water column. The model results reproduced the horizontal and vertical distributions of resuspended sediments better when the propeller-induced momentum was incorporated into the flow field computation. The sensitivity test indicated that the increased flow energy from propeller momentum resulted in significant dispersion of resuspended sediments in both longitudinal and lateral directions. The maximum scour was dependent on the propeller revolution speed, the ship engine power, and the distance between the propellers and the sediment bed. [ABSTRACT FROM AUTHOR]

Dredged sediment is commonly placed as a submerged nearshore berm to nourish the beach or to dissipate high-energy waves, but the lifespan of such features is not easily predicted by existing methods. This paper presents a simple technique for generating order-of-magnitude estimates of the sediment transport rate of nearshore berms using offshore hindcast wave characteristics transformed to the nearshore. Total longshore transport for the entire nearshore region is calculated using eight published longshore transport equations (e.g., CERC equation and Kamphuis equation), which were evaluated for their relative performance. Because nearshore placements occupy only a portion of the cross-shore profile, the total longshore transport rate is scaled by an empirically-based fraction between 0 and 1, which is determined by the nearshore berm's position in nondimensional space. The cross-shore transport rate is calculated independently using the near-bed orbital velocity from stream-function wave theory. The longshore and cross-shore transport rates are then superimposed to generate a total transport rate for the nearshore berm's constructed footprint. The total transport rates were calculated at 11 historical nearshore berms and evaluated based on accuracy, inclusion of relevant coastal processes, and sensitivity to input parameters. The recommended total transport rate technique resulted in an average percent error magnitude of 72% and a maximum percent error magnitude of 167% at the historical placement locations. This technique is recommended for generating rapid, order-of-magnitude estimates of nearshore berm deflation rates for project design, particularly in scenarios when application of a full numerical model is prohibitive. [ABSTRACT FROM AUTHOR]

Driven by waves, water surface elevation, and wind conditions, a coupled wave, hydrodynamic, and sediment transport modeling system was developed to investigate the transport of placed dredged material in the surf and nearshore zones of southern Lake Michigan. With the measured bathymetric data and the implementation of a cross-shore transport routine, the modeling study focused on nearshore sediment migration, bed volume change, and subaqueous profile change due to wave action. The field datasets validated the model's capability in properly reproducing longshore and cross-shore current and wave processes that govern nearshore sediment transport. The analysis on survey data and simulation results indicates that time-averaged longshore current dominates the redistribution of sediment. Although the cross-shore transport is an order of magnitude smaller than the longshore transport, including the surf zone cross-shore process in the model contributes to net bed and subaqueous profile changes, and greatly improves the model performance. [ABSTRACT FROM AUTHOR]

This paper presents a proof of concept that acoustic velocity and backscatter intensity measurements can provide essential information on ship wave–induced sediment transport processes in the littoral zone of a large river. Through a case study in the Hungarian section of Danube River, a combined application of an acoustic Doppler velocimeter (ADV) and a formerly calibrated acoustic backscatter sensor (ABS) is introduced for parallel measurements of 3D flow velocities and suspended sediment concentration (SSC) in a characteristic point of the near-bank zone. SSC times series detected by the ABS supported the calibration of the ADV backscatter, which eventually enabled the analysis of the temporal behavior of flow velocity and SSC conditions altered by ship waves. A suitable method for the separation of primary and secondary waves provided essential information on the turbulence intensities and sediment fluxes, and was found that the low-frequency primary waves are rather responsible for the lateral sediment transport instead of the dynamic secondary waves. The introduced data processing techniques and the main findings of the paper mean an important step toward the better understanding of the impacts of ship waves on the riverbanks, inherently playing a crucial role in the hydro-morphological and habitat conditions of river systems. [ABSTRACT FROM AUTHOR]

NavTEL is a new decision support tool for the short-term (36 h) planning of ship routes and the management of underkeel clearance in estuarine navigation channels. NavTEL uses a deterministic method and is coupled with the TELEMAC-MASCARET system for numerical modeling of hydrodynamic and sediment transport in the estuary with a two-dimensional approach. In its present version, NavTEL allows (i) daily simulations to be automatically prepared and launched; and (ii) simulation outputs to be postprocessed to find the safest ship route and to predict underkeel clearances at specified locations. As the reliability of the results relies on the accuracy of water-level predictions, numerical simulations were performed with measured river discharges, storm surge forecasts, and time-varying friction coefficients for bed roughness. Even though NavTEL was initially developed for the Atlantic Port of Bordeaux located in the Gironde Estuary, its kernel has a modular structure allowing the tool to be adjusted to different port configurations and types of water bodies. Finally, examples of graphical outputs and reports generated by NavTEL are shown for an application of a container ship coming into the port of Bordeaux. [ABSTRACT FROM AUTHOR]