Search

Composites are pivotal in Europe's evolving packaging sector, which is undergoing changes due to circular and bioeconomy initiatives, which prioritize eco‐friendly packaging. Despite paper's high recycling rates, dynamic markets challenge recycling and circularity. Innovative paper‐based composites demand flexible recyclability assessments, which impacts product development. Recyclability methods are evolving as they struggle to match the dynamic changes occurring in the packaging sector. This article outlines paper recycling and compares global lab recyclability evaluation methods. [ABSTRACT FROM AUTHOR]

Polymeric wet-strength agents are important additives used in the paper industry to improve the mechanical properties of paper products, especially when they come into contact with water. These agents play a crucial role in enhancing the durability, strength, and dimensional stability of paper products. The aim of this review is to provide an overview of the different types of wet-strength agents available and their mechanisms of action. We will also discuss the challenges associated with the use of wet-strength agents and the recent advances in the development of more sustainable and environmentally friendly agents. As the demand for more sustainable and durable paper products continues to grow, the use of wet-strength agents is expected to increase in the coming years. [ABSTRACT FROM AUTHOR]

Livestock dung, discarded crop straws, and residual plastic film are the primary agricultural non-point sources of pollution. For livestock dung and discarded crop straw, the general treatment focuses on compost, animal fodder, industrial raw material, and new energy. The development of degradable mulch film is the main way to solve pollution from residual plastic film. However, an effective way to solve the above three types of pollution simultaneously and use them for ecological circular agriculture has been less studied. In this study, using cow dung and flax straw wastes as raw materials, we prepared natural, fibre-based paper mulch using the rapid-Kothen method and analysed the film-forming mechanism. Based on the Van Soest method, the cow dung and flax straw waste contain abundant cellulose fibres: 36.75% and 54.69%, respectively. The tensile strength and tear strength of fibre paper mulch are 1.87 kN/m and 19.91 N/mm, respectively. To enhance the adaptability of the fibre paper mulch in humid environments, the surface of the mulch was treated with alkyl ketene dimer (AKD). The AKD-coated fibre paper mulch displays hydrophobic properties, indicated by a contact angle of 128° ± 2°. It has a wet tensile strength of 0.64 kN/m and a wet tear strength of 8.23 N/mm. Additionally, it exhibits a dry tensile strength and a tear strength of 2.13 kN/m and 16.43 N/mm, respectively. Notably, the dry tensile strength is increased by 16.31%. In this way, the livestock dung and discarded crop straw can be reused, reducing dung pollution and straw burning in livestock farms, and the final products can alleviate the residual film pollution simultaneously. [ABSTRACT FROM AUTHOR]

Following the circular bioeconomy concept, this work studies the potential of an industrial wastepaper residue as an alternative raw material for dissolving pulp‐grade production. Prehydrolysis‐kraft cooking (PHK), elemental chlorine‐free (ECF) bleaching, and acid‐washing treatments were applied to achieve that aim. Considering the high lignin and hemicellulose content of the raw material, it was submitted to PHK pulping to enhance its cellulose content by removing those components. This processing resulted in a remarkable increase of 84 % in pulp Fock reactivity (from 45.6 % to 84.1 %). The dissolution extension and time in solvent systems LiCl/DMAc and NMMO/H2O were discussed regarding the pulp physicochemical properties. The dissolving pulp produced under this work showed great potential as raw material for textile applications, particularly highlighting the innovative process developed to improve its solubility. [ABSTRACT FROM AUTHOR]

The development of self-powered UV photodiode on green substrate is still a challenge. In this study, highly conductive Al doped ZnO (AZO) film was sputter-deposited on paper substrate at room temperature; subsequently, paper-based Schottky photodiodes were successfully fabricated by following Au-ZnO-Al and Au-ZnO-AZO-Al structure designs, respectively. These UV light-based devices operate successfully without external power. Au-ZnO-AZO-Al photodiode shows improved response and faster speed compared to Au-ZnO-Al photodiode. The one-dimensional Poisson simulation results demonstrate that the improvement is attributed to the strong electric field in the ZnO-AZO n-n+ high-low junction, thus, enhancing the collection rate and drifting speed of the photogenerated carriers. In addition, AZO can form favorable ohmic contact with the Al electrodes, further improving the device performance. The photo-response of the paper-based photodiode device shows high reproducibility and stability. Based on these outstanding results, we conclude that these paper-based electronic devices have great potential to replace conventional petroleum-based flexible electronic devices, thus, contributing to the green/sustainable development. [ABSTRACT FROM AUTHOR]

The development of lignin-based admixtures (LBAs) for cement-based composites is an alternative to valorizing residual lignins generated in biorefineries and pulp and paper mills. Consequently, LBAs have become an emerging research domain in the past decade. This study examined the bibliographic data on LBAs through a scientometric analysis and in-depth qualitative discussion. For this purpose, 161 articles were selected for the scientometric approach. After analyzing the articles' abstracts, 37 papers on developing new LBAs were selected and critically reviewed. Significant publication sources, frequent keywords, influential scholars, and contributing countries in LBAs research were identified during the science mapping. The LBAs developed so far were classified as plasticizers, superplasticizers, set retarders, grinding aids, and air-entraining admixtures. The qualitative discussion revealed that most studies have focused on developing LBAs using Kraft lignins from pulp and paper mills. Thus, residual lignins from biorefineries need more attention since their valorization is a relevant strategy for emerging economies with high biomass availability. Most studies focused on production processes, chemical characterizations, and primary fresh-state analyses of LBA-containing cement-based composites. However, to better assess the feasibility of using different LBAs and encompass the multidisciplinarity of this subject, it is mandatory that future studies also evaluate hardened-sate properties. This holistic review offers a helpful reference point to early-stage researchers, industry professionals, and funding authorities on the research progress in LBAs. It also contributes to understanding the role of lignin in sustainable construction. [ABSTRACT FROM AUTHOR]

Paper-based analytical devices (PADs) enable the affordable, easy, rapid, and reliable detection of a range of analytes at the point-of-care. Cellulose is a versatile substrate for antibody attachment. However, how immunoreagents are immobilized onto cellulose plays an important role in assay performance. To provide an overview of the different antibody immobilization strategies used for developing PADs, we here critically review the existing literature from the last decade (2013–2023). First, we introduce cellulose as a substrate and summarize the different fabrication techniques for developing PADs. Thereafter, we delve into how antibodies are immobilized onto cellulose passively, covalently, or by affinity linkage. Affinity-based immobilization is further explored in a case study focused on using recombinant bifunctional proteins with cellulose-binding modules to anchor immunoreagents to cellulose. The final section discusses the validation and sustainable development of PADs addressing the existing and future challenges associated with developing such devices. [Display omitted] • Strategies for antibody immobilization onto cellulose substrates are reviewed. • Immobilizing antibodies in a site-selective manner improves analytical performance. • Cellulose requires modification before antibodies can be covalently attached to it. • Cellulose-binding modules facilitate antibody attachment onto unmodified cellulose. • Future challenges of developing sustainable paper-based immunoassays are discussed. [ABSTRACT FROM AUTHOR]

Petroleum-based plastics are useful, but they pose a huge threat to the environment and human health. The development of sustainable cellulose paper materials with excellent mechanical and water-resistance properties to replace plastics is highly desirable but also challenging. Herein, we report a new kind of rosin-based modifier synthesized from fully hydrogenated rosin and (3-glycidoxypropyl)triethoxysilane, which can covalently bind with cellulose fiber networks to improve the hydrophobicity and weaken the capillarity of cellulose paper. The rosin-grafted cellulose composite paper shows a unique combination of water resistance (water absorption of 19.2% and 37.9% in 25 and 90 °C water, respectively) and high strength (tensile strength of 47.9 MPa and Young's modulus of 2.32 GPa). Moreover, the rosin-grafted cellulose composite paper can be completely degraded when buried in soil for up to 100 days, and it can be recycled when treated with an alkali. These impressive performances make rosin-grafted cellulose composite paper a promising eco-friendly alternative material to replace plastics in straws, boxes, cups, bags and so on. [ABSTRACT FROM AUTHOR]

Factors of manufacturing sustainability in the papermaking industry were identified and ranked using qualitative analysis and nonparametric tests. Based on a review of the literature on sustainable development and production, seven main factors of economic, environmental, technological, social, human, material and product, and regulations were identified to underpin the manufacturing sustainability in the papermaking industry, as well as some sub-factors. Then, a self-designed questionnaire was developed to take a poll among papermaking managers and experts regarding the effectiveness of the factors and sub-factors in manufacturing sustainability and their status. The factors affecting manufacturing sustainability in the papermaking industry were confirmed by the standard and significance coefficients in the structural equations and the predictive criterion. The cross-validated redundancy index showed that the data were valid enough for prediction. The research factors were ranked by the ordinal average affecting sustainability, current status, and distance to sustainability. The materials and product, environmental, technological, and economic factors had the greatest influence on manufacturing sustainability, and the regulation and human factors had the highest distance to sustainability. To achieve manufacturing sustainability in the papermaking industry, regulations and human factors need to be further studied. Their improvement has potential to achieve manufacturing sustainability. [ABSTRACT FROM AUTHOR]

Plastic-coated paper straws are insufficient to solve the plastic pollution problem because microplastics are formed during their degradation. In this study, upgraded paper straws were prepared by coating with biodegradable sodium alginate/cellulose nanofiber/stearic acid (SA/CNF/STA) on the surface of paper without additional adhesives. The tensile strength of the paper was enhanced synergistically by the coated SA and CNF after cross-linking with Ca2+ ions, reaching a maximum (26.46 MPa) when the mass ratio of SA to CNF was 4:1. The straws were prepared by spirally winding coated paper into tubes. Subsequent STA modification with different concentration (1–40%) improved the water stability of the paper straws. The paper straws exhibited excellent mechanical properties (including 13.45 MPa of flexural strength, 13.30 MPa of compressive strength) and hydrophobicity (103.67° of maximum water contact angle). After 130 days of soil burial, the paper straws were completely degraded. The comprehensive performance of prepared straws exceeds that of commercially available products in the same category, and they are safe and biodegradable. Paper straw in the work is in line with the concept of green and low-carbon development. [Display omitted] • Processing a paper straw based on biomass resource coatings. • SA/CNF hybrid coating synergistically enhanced the tensile strength of the straw. • The STA imparts satisfactory water stability to the straw. • The comprehensive performance of the straw outperforms commercial straw products. [ABSTRACT FROM AUTHOR]

China's rapid urbanization has led to the development of integrated transport networks, which requires the transport sector to pay particular attention to the integrated transport comprehensive carrying capacity (ITCCC). Concurrently, global climate change has focused the world community's attention on greenhouse gas concentrations like CO2. This study establishes an ITCCC measurement model of urban agglomerations (UAs) and measures the comprehensive carrying capacity from four factors: socio-economic, basic resources, transport facilities, and traffic environment. In particular, this paper takes carbon emission as a critical indicator of the traffic environment when considering the impact factors of ITCCC. Based on the data of China's five major UAs, this study estimates carrying capacity levels with the ITCCC model and analyses regional characteristics using the spatial-temporal differentiation method. The results show that the traffic environment significantly impacts the ITCCC. Further low-carbon transport policies and measures are recommended to achieve sustainable development of integrated transport in UAs. [ABSTRACT FROM AUTHOR]

The Guidelines on Building a Market-Oriented Green Technology Innovation System, which was released by China in 2019, has become a powerful signal to guide the development of green technology innovation (GTI). In the current digital strategy of China, the public media has become a key factor for promoting the transparency of enterprise environmental information. This paper measures the GTI efficiency of the listed paper enterprises in China as well as incorporating media attention into the research framework to explore the influencing factors of GTI of the listed paper enterprises in China during the digital economy era. The results showed that a positive media report had a positive impact on GTI and has become a new driving factor in promoting sustainable production in the digital era. Government support and openness also have a positive impact on GTI. However, negative media reports, environmental regulations, and technological innovation abilities have an inhibitory effect on the GTI efficiency of paper making enterprises. [ABSTRACT FROM AUTHOR]

The exponential growth of China's economy, coupled with the surge in online commerce, has led to a significant expansion of the logistics industry. In 2022, China's express delivery industry generated approximately 9 million tons of waste paper and 1.8 million tons of plastic. This study analyzed the current composition and utilization of logistics waste in China, with suggestions for recycling. Logistics waste can be defined as the packaging waste generated in the logistics industry. Corrugated paper and plastic waste were chosen as the objects for utilization. Due to its high cellulose content, corrugated paper can be utilized along with other paper waste for biomass resourcing. Biodegradable plastics can also be converted into biomass resources through the action of specific microorganisms. These polymers can be enzymatically depolymerized by certain bacteria and fungi, yielding valuable organic products. In general, logistics wastes all have potential for biomass resource recovery. By adopting appropriate recovery and conversion technologies, these waste streams can be transformed into high-value bio-based products, such as biofuels, biochemicals, and biopolymers, thus contributing to the development of a circular and sustainable economy. [ABSTRACT FROM AUTHOR]

Environmental pollution has become an important obstacle on the path of ecological civilization construction, and it is urgent to control environmental pollution. By establishing an evolutionary game model, this thesis focuses on analyzing how paper-making enterprises choose their own emission reduction strategies under the reward and punishment mechanism. It further analyzes how social welfare changes under the reward and punishment mechanism, and finally through simulation research, this thesis analyzes the evolutionary paths of paper-making enterprises' pollution emission strategies under the reward and punishment mechanism. The results of the reward and punishment mechanism are as follows: under the static reward and punishment mechanism, the game system will repeatedly oscillate around a point. There is no stable equilibrium point at this time. However, under the dynamic reward and punishment mechanism, the game system will tend to a stable equilibrium point. The results of social welfare analysis show that high-intensity rewards will reduce the amount of pollution discharged by paper-making enterprises, thereby maximizing social welfare. On the contrary, when paper-making enterprises discharge a large amount of pollution, they will be subject to high-intensity penalties. When facing high-intensity punishments, paper-making enterprises will tend to not to discharge. So social welfare is also maximized. The simulation research results show that reasonable punishment strategies are more effective than reward ones. Based on this, the author proposes countermeasures, such as establishing a reasonable reward and punishment mechanism, reasonably determining the reward and punishment intensity for polluting enterprises. The emission reduction strategies of paper-making enterprises will be affected by the government's reward and punishment mechanism. A deep study of its internal mechanism is not only of great significance for pollution control but also of great significance for the development of a green economy. [ABSTRACT FROM AUTHOR]

Our everyday lives are surrounded by green revolutions, environmental protection, sustainable lifestyles, sustainable development, and safeguarding our planet. Despite the fact that environmental challenges affect all human activities, few academic fields have written about them. Marketing is a good example. Businesses have begun changing their conduct to address society's "new" environmental concerns. Green marketing and environmental marketing are commonly used in the news. Many organizations in numerous sectors utilise green marketing to follow this trend. The American Marketing Association (AMA) defines „green marketing' as the promotion of ecologically friendly products. Thus, green marketing includes adjusting products, changing production processes, packaging, and advertising. Environmental Marketing and Ecological Marketing are synonyms. Changing to "green" may look costly initially, but it will pay off in the long term. Researchers can use this study to learn about green marketing, its importance, potential, and obstacles. [ABSTRACT FROM AUTHOR]

In this work, the application of chemical surfactants, including cooking aids, detergents, surface sizing agents, and deinking agents as core components, is introduced in the wet end of pulping and papermaking. This method for the combined application of enzymes and surfactants has expanded, promoting technological updates and improving the effect of surfactants in practical applications. Finally, the potential substitution of green surfactants for chemical surfactants is discussed. The source, classification, and natural functions of green surfactants are introduced, including plant extracts, biobased surfactants, fermentation products, and woody biomass. These green surfactants have advantages over their chemically synthesized counterparts, such as their low toxicity and biodegradability. This article reviews the latest developments in the application of surfactants in different paper industry processes and extends the methods of use. Additionally, the application potential of green surfactants in the field of papermaking is discussed. Key points: • Surfactants as important chemical additives in papermaking process are reviewed. • Deinking technologies by combined of surfactants and enzymes are reviewed. • Applications of green surfactant in papermaking industry are prospected. [ABSTRACT FROM AUTHOR]

Research on bio-based, fluorine free, and silane free superhydrophobic paper was of great significance in promoting the development of sustainable materials. Herein, we presented a facile and green method for fabricating superhydrophobic paper. First, a cellulose-based hydrophobic material (DAC-ODA) was synthesized by reacting dialdehyde cellulose (DAC) with octadecylamine (ODA) via a Schiff base reaction. Then, silica nanoparticles was used to enhance the surface roughness of the coating. The resulting coated paper exhibited superhydrophobic with a water contact angle of 155 ± 0.6° and a sliding angle of 4.1 ± 0.4°. Moreover, excellent repellent performances towards both cold and hot water were also observed. The superhydrophobicity of the coated paper were well maintained even when exposed to acidic/alkaline erosions and high temperature environment. Additionally, the coated paper demonstrated good recyclability, biodegradability, and biocompatibility. Thus, this cellulose-based superhydrophobic paper would be potential candidates for fabricating disposable superhydrophbic packaging materials with broad applications. [Display omitted] ● A green and facile approach to prepare cellulose-based superhydrophobic paper. ● The fabrication process is free of organic solvents and fluorinated reagents. ● Superhydrophobic paper has degradability, recyclability, and biocompatibility. [ABSTRACT FROM AUTHOR]

As a traditional energy and carbon intensive sector, it becomes imperative for the global paper industry to realize green development. This paper aims to provide guidance for the green transformation of global paper industry by evaluating the global paper industry green development level in a systematic and dynamic way. This paper employs text-mining method to develop paper industry green development evaluation indicator system and adopts market-extended LCA model and entropy-TOPSIS method to calculate the paper industry green development level of 48 countries/regions. The results show that during 2000–2030 the paper industry green development level of developing countries improves faster than developed countries, where those of developing and developed countries increase from 0.3369 to 0.3938 and from 0.5120 to 0.5517 respectively and the gap between them narrows from 0.1751 to 0.1579. The comparative analysis reveals that the paper industries of developed and developing countries are in different green development stages. Developing countries, represented by China, improve greatly in economic and social dimensions, but decline seriously in ecological dimension due to enlarging resource consumption and environmental damages. On the contrary, developed countries tend to saturate in economic and social dimensions and have been improving fast in ecological dimension, gradually realizing the decoupling of industrial economic development and environmental damages. To further promote the global paper industry green development, developing countries should focus on promoting the coordinated development between economic growth and environment protection and developed countries should play a leading role in the global green transformation by promoting optimal allocation of resources and cross-regional communications of green technologies. • A paper industry green development indicator system is developed based on text mining. • A global paper industry green development model is built with market-extended LCA. • Complex interactions among the indicators are internalized in the evaluation. • A spatial-temporal analysis is performed on global paper industry green development level. [ABSTRACT FROM AUTHOR]

As a traditional energy and carbon intensive sector, it becomes imperative for the global paper industry to realize green development. This paper aims to provide guidance for the green transformation of global paper industry by evaluating the global paper industry green development level in a systematic and dynamic way. This paper employs text-mining method to develop paper industry green development evaluation indicator system and adopts market-extended LCA model and entropy-TOPSIS method to calculate the paper industry green development level of 48 countries/regions. The results show that during 2000–2030 the paper industry green development level of developing countries improves faster than developed countries, where those of developing and developed countries increase from 0.3369 to 0.3938 and from 0.5120 to 0.5517 respectively and the gap between them narrows from 0.1751 to 0.1579. The comparative analysis reveals that the paper industries of developed and developing countries are in different green development stages. Developing countries, represented by China, improve greatly in economic and social dimensions, but decline seriously in ecological dimension due to enlarging resource consumption and environmental damages. On the contrary, developed countries tend to saturate in economic and social dimensions and have been improving fast in ecological dimension, gradually realizing the decoupling of industrial economic development and environmental damages. To further promote the global paper industry green development, developing countries should focus on promoting the coordinated development between economic growth and environment protection and developed countries should play a leading role in the global green transformation by promoting optimal allocation of resources and cross-regional communications of green technologies. • A paper industry green development indicator system is developed based on text mining. • A global paper industry green development model is built with market-extended LCA. • Complex interactions among the indicators are internalized in the evaluation. • A spatial-temporal analysis is performed on global paper industry green development level. [ABSTRACT FROM AUTHOR]

Pulp and paper mill biomass boilers generate large quantities of ash in Canada with British Columbia (BC) being the highest ash generating province followed closely by Quebec. Generally, the generated ash is landfilled, particularly in BC, with only a small amount being used beneficially. It is anticipated that the difficulty associated with the management of ash will worsen over time as the industry increases its reliance on green fuel. Thus, there is a strong need to identify beneficial uses of pulp and paper boiler ash for the sake of environmental and economic sustainability. The purpose of this report is to provide the first step in this direction, a review of proposed or implemented uses for coal and hog (or wood) ash around the world. Considering both the properties of the ash and local opportunities, this could be the first step toward screening the applications that may apply to individual mills. Several large-scale practices use ash, such as land application (as a nutrient source or as a liming agent), use in the construction industry (as a replacement for cement or as a fill material), and reclamation of mine sites and stabilization of unpaved forest roads. In some cases, relatively small-scale applications have been used which included uses such as a compost component, agent for pH adjustment of liquid streams and slurries, blasting abrasive, and source of quartz for glass manufacturing to name a few. It is important to note that the chemical nature of both fly and bottom ashes can be quite variable due to the type of wood residues combusted as well as combustion equipment used and must be considered in identifying beneficial applications. • General ash characterization is not enough to find useful applications of ash. • Ash use in the liming agent requires different properties than ash use in concrete. • Ash must be characterized according to its application requirements. • PPM ash can mainly be used for concrete, ag lands, liming agent, and forest roads. [ABSTRACT FROM AUTHOR]

This work presents the development of a green paper-based analytical device (Green-PAD) array for pH detection. The array was obtained with natural dyes extracted from red cabbage (Brassica oleracea) and butterfly pea flower (Clitoria ternatea); a filter paper was used as a substrate. The RGB indexes of the PADs' colors were extracted from the pictures taken using a smartphone or using a specifically developed RGB detector (Arduino-based) to obtain RGB indexes not affected by the light and the photocamera sensitivity. Multi-technique chemometric models were developed for calculating the pH value, starting from the RGB triplet of each sensing PAD. A preliminary and explorative chemometric analysis with PCA (partial component analysis) and TWPCA (3-way PCA) was carried out. Partial least square regression, PLS, was then applied to correlate the color of the PAD's picture with the solutions' pH. Different solutions at various pHs, ranging from 1 to 13, were obtained by titrating orthophosphoric acid with standardized NaOH, and they were used to create PLS models. Some real samples were examined as a test set, and the results were validated with pH-meter measurements. The ability of the PLS to model the experimental data was satisfactory since a good agreement between the experimental and fitted pH values was obtained. The proposed PADs were prepared with natural dyes and filter papers, so they are completely biodegradable and eco-friendly. Their fabrication does not require toxic or expensive reagents and sophisticated equipment. Also, the developed RGB detector, built-up with low-cost components and recycled batteries, adds value making the measurement cheap, easy and feasible also by non-expert people. [ABSTRACT FROM AUTHOR]

Low-quality materials contained in separately collected (SC) packaging waste generate environmental and economic burdens associated to both sorting operations of Material Recovery Facilities (MRFs) and landfilling of non-recyclable materials. In this study, based on quantification of both impurities and recyclable fractions, the quality of SC municipal packaging waste streams was determined by compositional analysis of the waste entering a MRF throughout a year. Foreign materials (% w/w) found in the monitored SC glass, paper plus cardboard and lightweight packaging waste, were on average 5.0, 14.7 and 23.0, respectively, while landfilled materials (% w/w) after MRF sorting operations were on average 4.3, 10.3 and 22.0, respectively. A Life Cycle Assessment study was conducted to determine the environmental impact of SC packaging waste streams quality of three different scenarios: current situation (CS), better (BS) and ideal (IS) scenario with reduced presence and absence, respectively, of improper materials in the three examined SC packaging waste streams. Emission of 32.1 kg CO 2 eq/t waste was calculated for the current situation with a reduction by 66.1% and 98.0% in CO 2 eq emission for BS and IS scenario, respectively. Similar emission reductions were calculated for ozone depletion, ionizing radiations, particle matter formation, fossil fuel depletion and primary energy demand impact categories. The environmental life cycle costing study demonstrated that total savings of € 35.2 and € 66.6 for each ton of SC packaging waste stream entering the MRF could be obtained for BS and IS scenario, respectively. [Display omitted] • Impurities in packaging waste streams generate environmental and economic burdens. • 23.0% of impurities were found in separately collected lightweight packaging waste. • Plant sorting operations generate 32.1 kg CO 2 eq for each ton of packaging waste. • € 35.2/ton of sorted packaging waste could be saved by reducing impurities content. [ABSTRACT FROM AUTHOR]

Rural communities face problems related to depopulation, lack of jobs, weak digital infrastructure, decline of basic public services. LEADER is an initiative to support rural communities, which takes shape in a Local Development Strategy with a role in using local resources in a way that meets the needs identified in the territory. The support of projects for smart villages must be encouraged through local development strategies that pursue various fields: reducing the depopulation of villages, providing quality services, developing local services, promoting digitization. The paper proposes the role that the LEADER intervention belonging to the Strategic Plan, which is one of the instruments of the European Union, can contribute to supporting these rural development projects, which can represent local initiatives and which can benefit from funding sources that will contribute to the identification of strategies and future solutions to promote smart villages. The information used in the work was collected, processed and interpreted starting from data belonging to the Bureau for the Financing of Rural Investments, along with insights from the Ministry of Agriculture and Rural Development, converge in a rich tapestry of thought at the paper's conclusion. Here, they weave forward-thinking strategies for the cultivation of smart villages, which are envisioned as vibrant oases capable of elevating the quality of life for rural dwellers. These innovative settlements promise to champion the cause of sustainable rural development, casting a verdant future where community and sustainability flourish side by side. [ABSTRACT FROM AUTHOR]

The paper presents the main trends of the Romanian honey market, in the period 2018-2022. In order to better highlight the evolution of this market, it was necessary to analyze specific indicators such as: total production of honey and the number of bee families both nationally and regionally; the price for honey at national level; consumption of honey per capita - average annual; quantitative exports and imports of honey from Romania. Complementary to the economic part, due to the fact that the honey bees are not only honey producers, but also vital natural pollinators, the paper also mentions and analyzes aspects related to the ethics of the beekeeping environment in Romania and EU, especially the use of neonicotinoids, in the context of global transformations. [ABSTRACT FROM AUTHOR]

The paper aims to comprehensively examine the critical role of rural development in the broader framework of achieving the Sustainable Development Goals (SDGs). Employing a robust mixed-methods research design, we explore global and regional rural development policies through a cross-cutting analysis. The primary objective is to uncover the profound and positive impact of specific interventions on critical SDG indicators, with a particular focus, on poverty reduction, improved access to education and healthcare, and significant progress in agricultural productivity. Our research uses a mixed-methods design, combining quantitative analysis, qualitative insights from community engagement sessions, and spatial analysis using GIS-based mapping. Preliminary results show a promising correlation between sustainable agricultural practices and meeting the SDGs, with a 30% reduction in food insecurity rates, while the qualitative insights indicate a notable increase in community cohesion and empowerment, highlighting the impact of rural development on well-being. Summarising these multi-faceted findings, our study highlights the symbiotic relationship between rural development initiatives and the SDGs. The imperative for context-specific and adapted strategies is evident from the spatial analyses, highlighting the need for a comprehensive, integrated and locally informed approach to achieve sustainable and equitable overall development. The paper advocates the recognition of rural development as a key driver for positive change in pursuit of the SDGs, providing valuable insights for policy makers, practitioners and researchers. [ABSTRACT FROM AUTHOR]

The power industry's low carbon transition is pivotal for achieving carbon reduction and sustainable development. This study uses the super epsilon-based measurement (Super-EBM) model and the Malmquist index to evaluate the power industry's low carbon transition efficiency using data from 30 provinces in China from 2010 to 2020, and utilizes the Tobit model to comprehensively analyze the factors affecting the low carbon transition of power industry. In addition, this paper examines the spatial differences in the power industry's low carbon transition efficiency as well as its distributional characteristics and dynamic evolutionary patterns. Conclusion is drawn as follows this paper analyzes the regional differences, spatial distribution characteristics and dynamic evolutionary trends of the power industry's low carbon transition. The main conclusions are as follows: (1) The power industry's low carbon transition efficiency in China shows an uptrend, with the western China region having the highest overall level of efficiency, greater fluctuations in the central China region, and more stability in the eastern China region, technological progress is a central factor in increasing total factor productivity, the efficiency of the power industry's low carbon transition is positively influenced by the electricity prices, and negatively influenced by the energy structure, environmental regulations and economic structure; (2) the Intraregional differences and hypervariable density are the main reasons sources of the overall differences in the efficiency of the power industry's low carbon transition; Intraregional differences in the eastern, central, and western China regions are decreasing year by year, but the efficiency of the power industry's low carbon transition in the western China region is still distributed in a multipolar way; (3) The dynamic evolutionary trends of the efficiency distribution of the low carbon transition in power industry is influenced by the type of spatial lag in the neighboring area. Where areas with low efficiency makes it difficult to achieve short-term leapfrog development, and areas with a cluster of high-efficiency provinces are prone to "Siphon Effect". The findings provide a theoretical basis for promoting the efficiency of the power industry's low carbon transition and coordinating the strategic adjustment of economic and environmental green development. [ABSTRACT FROM AUTHOR]

The UK's Quality Assurance Association for Higher Education (QAA) recommend that all undergraduate courses at UK universities include in their curricula elements of Equality, Diversity and Inclusion; Enterprise and Entrepreneurship Education; and Education for Sustainable Development. This paper examines the detail of the QAA's recommendations and finds that they are significantly influenced by critical pedagogy. While the potential benefits of the QAA's recommendations are readily apparent, the paper identifies a number of potential risks, including opportunity costs for students, dumbing down and political bias. Alongside this theoretical analysis, this paper presents a case study which examines in detail the course materials of a cross‐curricular module piloted at King's College London called the ‘King's First Year: Gateway to King's’ which covered essentially the same themes. It appears that many of the risks identified with the QAA's approach would have been realised had this module been introduced as a compulsory module for all undergraduates at King's College London as was originally planned. As student take‐up was low, it was abandoned after the pilot, and so ultimately the risks were not realised. When introducing significant curriculum changes such as those proposed by the QAA, it is important to be certain that the benefits outweigh the risks. For this reason, a case study of an unsuccessful educational intervention is valuable and may correct for the possibility of publication bias in the literature if institutions choose not to publicise their less successful projects. [ABSTRACT FROM AUTHOR]

This paper employs a comparative analysis to investigate the state-led use of industrial heritage in major Chinese mega-events, delving into the three cases of the Guangzhou Asian Games, the Shanghai Expo, and the Beijing Winter Olympics. Examining the evolving practices led by Chinese governments reveals unique pathways for industrial heritage and showcases its diverse roles in economic development and societal transformation. The three cases illustrate the nuanced dynamics between market forces and state interventions, emphasising the importance of strategic planning and long-term considerations in mega-event-induced heritage practices. Mega-events serve as catalysts for urban regeneration, allowing governments to allocate substantial resources to conserve and repurpose industrial heritage. However, the current paper contends that the sustained benefits of industrial heritage hinge on thoughtful planning for long-term economic and social sustainability, emphasising the need to constrain a focus on short-term gains through land revenue. These reflections contribute to a nuanced understanding of the intricate interplay between heritage preservation, economic development, and sustainable urban planning in the context of China's mega-events. [ABSTRACT FROM AUTHOR]

Human capital is a nation's primary source of inner strength to achieve sustainable economic growth and development. Meanwhile, income inequality is a critical issue preventing sustainable economic growth and social transformation, especially in developing countries. This paper investigates the effect of human capital on income inequality in both the short and long term using the mean group, pooled mean group, and threshold regressions for the ASEAN-7 (including Indonesia, Laos, Malaysia, the Philippines, Singapore, Thailand, and Vietnam) from 1992 to 2018. The paper develops a theoretical linkage between human capital and income inequality by combining the learning theory and the Kuznets hypothesis. This linkage is then tested using data from the ASEAN countries. Findings from the paper indicate that human capital reduces income inequality in the short run in the ASEAN countries. However, the effect is reverted in the long run, suggesting that human capital may increase the income gap in these countries. Particularly, the inverted U-shaped relationship between human capital and income inequality is established for the ASEAN countries whose GDP per capita is lower than USD 8.2 thousand per year. In contrast, the U-shaped relationship is found for the countries with income per capital of more than USD 8.2 thousand. All these findings suggest that social policies targeting reducing income inequality should be prioritized and stay at the centre of any economic policies to achieve sustainable economic growth and development in the ASEAN countries. [ABSTRACT FROM AUTHOR]

Solar cells represent a promising innovation in energy storage, offering not only exceptional cleanliness and low cost but also a high degree of flexibility, rendering them widely applicable. In recent years, scientists have dedicated substantial efforts to enhancing the performance of solar cells, aiming to drive sustainable development and promote clean energy applications. One approach that has garnered significant attention is strain engineering, which involves the adjustment of material microstructure and organization through mechanical tensile or compressive strain, ultimately serving to enhance the mechanical properties and performance stability of materials. This paper aims to provide a comprehensive review of the latest advancements in the application of strain engineering in solar cells, focused on the current hot research area—perovskite solar cells. Specifically, it delves into the origins and characterization of strain in solar cells, the impact of strain on solar cell performance, and the methods for regulating stable strain. Furthermore, it outlines strategies for enhancing the power conversion efficiency (PCE) and stability of solar cells through strain engineering. Finally, the paper conducts an analysis of the challenges encountered in the development process and presents a forward-looking perspective on further enhancing the performance of solar cells through strain engineering. [ABSTRACT FROM AUTHOR]

Under the background of building a new-type power system, as the core of the energy system, the restructuring of the power system will inevitably have a linked impact on the coordinated development of the economy–energy–environment system. A "Dual Triangle" theoretical framework consisting of the "Energy Impossibility Triangle" and "Sustainable Development Triangle" was constructed in this paper. By combining historical statistical analysis with scenario predictive analysis, the historical characteristics of the "Dual Triangle" and future trends under different scenarios were analyzed, and the coupled interaction relationship of the "Dual Triangle" was also studied. Conclusions were as follows: The energy system gradually inclined towards economy and cleanliness from 2010 to 2022, and the operation status of the "Dual Triangle" was stable. A positive coupling relationship within the "Dual Triangle" in vigorously promoting renewable energy scenarios is close, which can be regarded as the preferred path for the reconstruction of the power system. The security and low-carbon phased development scenario is a development model that dynamically mitigates the challenges of the "Energy Impossibility Triangle". Security has become the core contradiction of the "Energy Impossibility Triangle". This paper conducts an integrated and innovative application of the "Dual Triangle" theory and provides a case basis for how to achieve the coupled interaction of the "Dual Triangle". [ABSTRACT FROM AUTHOR]

Rapid urbanization will cause various land use changes and the vast occupation of green spaces, a critical factor in the deterioration of biodiversity in urbanized areas. Some species of wildlife are endangered due to habitat shrunk and fragmentation. However, Malaysia's current biodiversity protection range is still limited. The Ecological Network (EN) refers to a framework of ecological components, which can be obtained by geographical and technical approaches to support more ecological diversity ranges. Furthermore, little research has been found on EN in Malaysia and the impact of land use change on EN. Therefore, the Selangor region is selected as the study area. This paper quantifies land use change and measures the extent of land use change to obtain the EN's change. The result has shown that forestland has decreased, explored by people for housing and agriculture from 2000 to 2020. The EN has a trend of fragmentation. Overall, this study's results imply that the land use change led to EN's worsened performance from 2000 to 2020 in the study area. This paper hopes that this research could help supply information on conserving biodiversity in future development and urban sustainable planning in Malaysia. [ABSTRACT FROM AUTHOR]

Shaping how information and communication technology (ICT) adoption supports sustainable development has become a major challenge for countries worldwide. The concept of a digital ecosystem has recently become prevalent among development organizations to aid diagnoses and guide actions addressing that challenge. However, not only are there various ways in which a digital ecosystem is conceptualized, but its meaning is also blurred with earlier uses in business studies. Against this backdrop, the present paper takes stock of how the digital ecosystem concept has come to be used as a tool to describe the state of ICT adoption in countries and understand ICT impacts on development outcomes. Systematizing existing uses of the concept, the paper distinguishes between a descriptive, enabler-centered, and actor-centered digital ecosystem perspective. It furthermore discusses existing uses of a digital ecosystem and the extent to which they realize the potential added value of this concept for development practice and research. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive review of the African Geographical Review (AGR) from 1963 to 2024, highlighting its evolution, thematic shifts, and impact on geographical scholarship within Africa. It explores the journal’s historical context, examining its geographical dynamics and how it has adapted to changing socio-political and environmental landscapes over the decades. The analysis draws from an interview with a past editor of the AGR and other secondary sources, including the journal’s scope and publications from the 1960s to the present, to provide a historical review of its content and identify key thematic trends across different periods and spaces. The paper also examines how the AGR has addressed pressing socioeconomic and sustainable development issues over time. This historical overview illustrates the AGR’s role in fostering a deeper understanding of Africa’s complex geographical narratives and its ongoing contribution to global academic discussions. [ABSTRACT FROM AUTHOR]

This paper analyses how 'criticality' is negotiated in the global policy frameworks on Education for Sustainable Development (ESD) and re-conceptualised in Vietnamese ESD policymaking. Taking the context of Viet Nam, this paper reflects on what constitutes criticality in education in the light of cultural and historical contexts of the education systems. The comparative perspective helps explore whether (1) universal or decontextualised 'criticality' exists or (2) whether 'criticality' is culturally negotiated based on the premise that educational imaginaries of societal formation and transformation are historically and contextually embedded and contingent. In addition, this paper connects the ongoing debate on the critical potential of ESD within the field of environmental education (EE) research to comparative education research by highlighting both what a comparative perspective might offer to EE research and what recent developments in EE research might contribute to comparative education research. [ABSTRACT FROM AUTHOR]

This paper examines which institutions, ideas, and interests have shaped the position of Bangladesh in creating the norms of the United Nations (UN)'s Sustainable Development Goals (SDGs). Bangladesh's contribution to the SDGs norms creation process is examined in two distinct stages: drafting a position paper (June 2012–June 2013) and participating in UN Open Working Group (OWG) negotiations (March 2013–July 2014). Findings reveal how a small cohort of policy entrepreneurs played a key role in both stages. They gave prominence to ideas such as poverty alleviation, global inequality, and migrants' rights in structuring the SDGs agenda. In the final round of OWG negotiations, Bangladeshi delegates calculated that active participation in the norms creation process would best serve the interests of the Global South by challenging the Global North which wanted to impose its interests. This paper offers an important insight into the norms literature by showing convergence and divergence of interests and agendas of global and local actors. [ABSTRACT FROM AUTHOR]

This paper shows how the leading Higher Education Institutions (HEIs) in the UI GreenMetric World University Ranking communicate their environmental sustainability policies through their websites. Specifically, this paper analyses the presence of sustainability‐related sustainable development goals on the websites of the top 100 universities in the UI GreenMetric World University Ranking (2021). In the area of university social responsibility, sustainability is less commonly communicated, hence the need to delve deeper into the presence of these messages, carrying out a descriptive study using content analysis as a form of data extraction. The conclusion is that neither position in the ranking nor geographic area are decisive for developing better communication about sustainability. In terms of content, sustainability features on the websites are in three key dimensions of the communication of HEIs worldwide (Climate change, Efficiency of sustainable cities and communities and Striving for peace and justice). Thus, the areas for improvement are around the positioning of this sustainability‐related content on their home pages, improving location and format (especially video). Moreover, reinforcing reputational messages, through plans or programmes, as well as improving engagement working on the multi‐directionality to other social media, is required. [ABSTRACT FROM AUTHOR]

Purpose: Higher education institutions (HEIs) offer courses and programmes focusing on sustainability in economics, as courses on sustainable development (SD), which examine the economic, social and environmental dimensions of SD. This paper aims to examine sustainability integration in economics degree programmes. Design/methodology/approach: Through an extensive literature review in Web of Science (WoS) and information search in Google, conducting to 28 relevant case studies, this paper elucidates the emphasis given to sustainability as part of economics degree programmes in HEIs. Findings: The results suggest that, whereas the inclusion of sustainability components in this field is a growing trend, much still needs to be done to ensure that matters related to SD are part of the routine of university students studying economics. Research limitations/implications: It is worth noting that the literature review conducted in WoS was primarily aimed at assisting in the selection of university case studies. The 28 university case studies scrutinised in this study may lack sufficient representation from numerous developing countries. Practical implications: This study highlights challenges in integrating the SD into economics degree programmes, suggesting the need for curriculum adjustments as underscoring operational issues, acting as barriers. The inclusion of sustainability in economics programmes must navigate operational issues stemming from packed timetables and busy schedules, requiring innovative solutions. Social implications: As far as the authors are aware, this study holds substantial importance in its emphasis on implementing sustainability within HEIs' economics programmes, assisting in pursuing SD. Originality/value: The novelty of this study lies in addressing sustainability with the specific economics focus programmes within the HEIs context. [ABSTRACT FROM AUTHOR]

As they represent an important form of agricultural operation, the sustainable development of family farms is not only an objective necessity for promoting comprehensive rural revitalization in China, but also an imperative strategy for accelerating the construction of agricultural power in China. Based on the survey data of 357 family grain farms in China, this paper uses a structural equation model to empirically analyze the relationship between market-oriented perceptions, organizational resilience, and the sustainable development of family grain farms. The results show that market-oriented perceptions have a significant positive impact on the sustainable development of family grain farms; additionally, organizational resilience plays a mediating role in the impact of market-orientation perceptions on the sustainable development of family grain farms. Based on this, the paper proposes a two-fold approach to the sustainable development of family farms: improving the level of market-orientation perceptions of family farmers and enhancing the organizational resilience of family grain farms. [ABSTRACT FROM AUTHOR]

Energy saving has become a key concern of metro systems to reduce operating costs and meet the requirements of sustainable development. Energy-efficient timetabling, an effective way to reduce traction energy consumption, has gotten much attention in recent decades. However, limited research about energy-efficient timetabling simultaneously considered realistic speed profiles and the influence of train loads, which change greatly in different sections and significantly affect energy consumption. Therefore, this paper proposes an energy-efficient timetabling approach to improve regenerative energy utilization based on varying train loads and realistic speed profiles for bidirectional metro lines. First, based on the operational and safety constraints, this paper constructs an integer energy-efficient timetabling model where dwell times and nonuniform headways are taken as decision variables. Besides, the turnaround process is also considered to ensure rolling stock circulation efficiency. Sectional passenger volumes are employed to determine the varying train loads. Energy consumption is calculated based on realistic speed profiles. Owing to the complexity of the model, an improved adaptive large neighborhood search (ALNS) algorithm is designed to solve this model according to its characteristics. Finally, numerical examples are conducted based on the practical data from Shanghai Metro Line 17. The results indicate that the proposed approach effectively solves the energy-efficient timetabling problem with varying train loads and realistic speed profiles for bi-directional metro lines. The approach is suitable for off peak hours and can reduce energy consumption effectively, and the reduction is up to 11.9% for the presented cases. The improved ALNS algorithm can find good solutions within reasonable times in different cases. Moreover, compared with the widely used genetic algorithm in the literature, the improved ALNS algorithm is more efficient in solving the proposed energy-efficient timetabling problem in different cases. [ABSTRACT FROM AUTHOR]

New‐type professional farmers are new‐type rural talents with scientific and cultural literacy and professional knowledge of agriculture under the background of rural revitalization. The new type of professional farmers is of great significance for accelerating agricultural modernization and promoting the construction of a powerful modern socialist country. In the process of cultivating new types of professional farmers in rural areas, it is necessary to break through the previous informatization constraints of poor information flow, and give full play to the role of advanced information technology to promote the sustainable economic development. This paper proposes a new type of professional farmer cultivation platform based on edge computing architecture to improve the cultivation efficiency of new type of professional farmers, so as to better promote the development of rural informatization. Aiming at the challenges of energy consumption under the edge platform architecture, this paper proposes a dynamic scheduling method for semi‐online tasks for edge computing platforms. In order to evaluate the effectiveness of the algorithm, the method in this paper is compared with the classic scheduling algorithm, and simulated and verified on the CloudSim platform. Experimental results show that the proposed method outperforms other algorithms in the task completion time metric. With the expansion of task scale, more energy consumption can be saved by using the algorithm proposed in this paper. [ABSTRACT FROM AUTHOR]

The coupling between modern electric power physical and cyber systems is deepening. An increasing number of users are gradually participating in power operation and control, engaging in bidirectional interactions with the grid. The evolving new power system is transforming into a highly intelligent socio–cyber–physical system, featuring increasingly intricate and expansive architectures. Demands for stable system operation are becoming more specific and rigorous. The new power system confronts significant challenges in areas like planning, dispatching, and operational maintenance. Hence, this paper aims to comprehensively explore potential synergies among various power system components from multiple viewpoints. It analyzes numerous core elements and key technologies to fully unlock the efficiency of this coupling. Our objective is to establish a solid theoretical foundation and practical strategies for the precise implementation of integrated planning and operation dispatching of source–grid–load–storage systems. Based on this, the paper first delves into the theoretical concepts of source, grid, load, and storage, comprehensively exploring new developments and emerging changes in each domain within the new power system context. Secondly, it summarizes pivotal technologies such as data acquisition, collaborative planning, and security measures, while presenting reasonable prospects for their future advancement. Finally, the paper extensively discusses the immense value and potential applications of the integrated planning and operation dispatching concept in source–grid–load–storage systems. This includes its assistance in regards to large-scale engineering projects such as extreme disaster management, facilitating green energy development in desertification regions, and promoting the construction of zero-carbon parks. [ABSTRACT FROM AUTHOR]