Search

Driven by the need for impact resistance and vibration reduction for mechanical devices in extreme environments, an all-metal vibration isolator with 6-degree-of-freedom (6-DOF) motion that is horizontally symmetrical was developed. Its stiffness and damping ability are provided by oblique springs in symmetrical arrangement and a metal–rubber elasto-porous damper. The spring is symmetrically distributed in the center axis of the support load surface. It is necessary to investigate the kinematics and the singularity before conducting multi-body dynamics analysis of the vibration isolator. Based on the theory of dual quaternions, the forward kinematics equations of the isolator were successively derived for theoretical kinematics modeling. In addition, an enhanced Broyden numerical iterative algorithm was developed and applied to the numerical solution of the forward kinematics equations of the vibration isolator. Compared with the traditional rotation-matrix method and Newton–Raphson method, the computational efficiency of the enhanced Broyden numerical iterative algorithm was increased by 680% and 290%, respectively. This was due to the enhanced algorithm without the calculations of any inverse matrix and forward kinematics equations. Finally, according to the forward kinematics Jacobian matrix, the position-singularity trajectory at a given orientation and the orientation-singularity space at a given position are calculated, which provides a basis for the algorithm of the 6-DOF vibration isolator to avoid singular positions and orientations. [ABSTRACT FROM AUTHOR]

This paper addresses the synthesis of one degree-of-freedom (1DOF) linkages that can exactly transmit angular motion between coplanar axes (i.e., parallel axes or intersectant axes) with arbitrarily prescribed constant velocity ratios. According to motion polynomials over dual quaternions and pure rolling models between two circles, an algebraic approach is presented to precisely synthesize new 1DOF linkages with arbitrarily prescribed constant velocity ratios. The approach includes four steps: (a) formulate a characteristic curve occurred by the pure rolling, (b) compute the motion polynomial of the minimal degree that can generate the curve, (c) deal with the factorization of the motion polynomial to construct an open chain, and (d) convert the open chain to a 1DOF linkage. Using this approach, several 1DOF planar, spherical, and spatial linkages for angular motion transmission between parallel axes or intersectant ones are constructed by designating various velocity ratios. Taking the planar and spherical linkages with a constant 1:2 velocity ratio as examples, kinematics analysis is implemented to prove their motion characteristics. The result shows that the generated linkages indeed can transmit angular motion between two coplanar axes with constant velocity ratios. Meanwhile, three-dimensional (3D)-printed prototypes of these linkages also demonstrate such a conclusion. This work provides a framework for synthesizing linkages that have great application potential to transmit motion in robotic systems that require low inertia to achieve reciprocating motion with high speed and accuracy. [ABSTRACT FROM AUTHOR]

The dual quaternion plays an advantageous role in the field of robotic kinematics and dynamics due to its compact expression. It is well known that quaternion can be easily implemented as algebraic operations on vectors through matrix operators. Similarly, the dual matrix operators can convert dual quaternion operations to matrix operations. However, it has not received adequate attention, and thus there are very few applications at present. With the dual matrix operators of dual quaternion, this paper re-verifies the equivalency between the conjugate formula of unit dual quaternion and dual Euler–Rodrigues formula. To combine this equivalence with the homomorphic mapping of Lie groups, a theoretical correlation of the current hand-eye calibration methods is established. Motivated by the attempt to establish a more complete scheme for hand-eye calibration, a new simultaneous method based on the conjugate formula of dual quaternion is proposed. The method verifies that the rotation problem can be extended to the rigid-body transformation problem via the dual algebra. Finally, the simulation and experimental validations for the hand–eye calibration method are given. • The conjugate formula of unit dual quaternion is re-verified via the dual operations. • A new simultaneous method is defined for hand-eye calibration. • The theoretical correlation with the existing methods is established. [ABSTRACT FROM AUTHOR]

In this study, we are interested in the way quaternions to represent 3D and 4D rotations in Lorentzian space. We give a new method for obtaining a rotation matrix in Lorentzian space with the help of a unit quaternion. Furthermore, we prove that rotation matrices correspond to a quaternion leave invariant the same axis in Euclidean and Lorentzian space. Then, we introduce a semi‐orthogonal matrix representation of a quaternion curve in 4D space. Moreover, we provide applications and draw their figures to explore visual representations. Finally, due to the importance of the dual space in kinematics, robotics, and other areas related, we carry this work into their dual spaces by using a dual quaternion. [ABSTRACT FROM AUTHOR]

• An algebraic synthesis method is proposed to form novel multi-loop linkages for rotation scaling. • Multi-loop planar, spherical, and spatial linkages can be constructed using the proposed method. • The generated linkages can exactly transmit angular motion with prescribed transmission ratios. • Exact angular motion transmission between parallel, intersecting, or skew axes is achieved. • Transmission characteristics of the multi-loop linkages are proved by kinematics analysis. This paper deals with the algebraic synthesis and input-output analysis of one degree-of-freedom (1-DOF) multi-loop planar, spherical, and spatial linkages for increasing or decreasing angular motion with a desired constant transmission ratio between two adjacent parallel, intersecting, and skew axes respectively. Based on the rotation scaling model and motion polynomials over dual quaternions, an algebraic synthesis method including three procedures is proposed to exactly construct novel multi-loop linkages owning arbitrarily prescribed constant transmission ratios and input/output axes. To illustrate this method, several 1-DOF multi-loop planar, spherical, and spatial linkages for rotation scaling are synthesized by designating various input and output axes as well as transmission ratios. Taking some multi-loop planar, spherical, and spatial linkages as examples, input-output analysis is carried out to verify their transmission characteristics. The results demonstrate that the generated 1-DOF multi-loop linkages can indeed transmit motion with prescribed constant transmission ratios and input/output axes. This work provides a framework for further investigation on mechanisms performing specified tasks for motion transmission. [ABSTRACT FROM AUTHOR]

Abstract We discuss existence of factorizations with linear factors for (left) polynomials over certain associative real involutive algebras, most notably over Clifford algebras. Because of their relevance to kinematics and mechanism science, we put particular emphasis on factorization results for quaternion, dual quaternion and split quaternion polynomials. A general algorithm ensures existence of a factorization for generic polynomials over division rings but we also consider factorizations for non-division rings. We explain the current state of the art, present some new results and provide examples and counter examples. [ABSTRACT FROM AUTHOR]

Rigid motion computation or estimation is a cornerstone in numerous fields. Attitude computation can be achieved by integrating the angular velocity measured by gyroscopes, the accuracy of which is crucially important for the dead-reckoning inertial navigation. The state-of-the-art attitude algorithms have unexceptionally relied on the simplified differential equation of the rotation vector to obtain the attitude. This paper proposes a functional iteration technique with the Rodrigues vector (named the RodFIter method) to analytically reconstruct the attitude from gyroscope measurements. The RodFIter method is provably exact in reconstructing the incremental attitude as long as the angular velocity is exact. Notably, the Rodrigues vector is analytically obtained and can be used to update the attitude over the considered time interval. The proposed method gives birth to an ultimate attitude algorithm scheme that can be naturally extended to the general rigid motion computation. It is extensively evaluated under the attitude coning motion and compares favorably in accuracy with the mainstream attitude algorithms. This paper is believed having eliminated the long-standing theoretical barrier in exact motion integration from inertial measurements. [ABSTRACT FROM AUTHOR]

A six-axis vibration isolation system is essential to high-precision space systems for attenuating vibrations on precise instruments. The kinematic optimal design is researched for the space six-axis vibration isolator via Stewart mechanism. Jacobian matrix is the basis of the kinematic performance index. However, the conventional Jacobian matrix is not usually dimensionally homogeneous due to the inhomogeneous physical units, caused by the different mathematical representations of the rotation and translation. In this paper, we propose a dual quaternion approach to derive the dimensionally homogeneous Jacobian matrix of a general six-axis parallel mechanism. Two quaternions are used to parameterize the rotation and translation of the platform. The dimensionally scaling factor for the generalized Jacobian matrix is defined as the ratio of the norms of the two quaternions. The dimensionally homogenous Jacobian matrix is then obtained and applied to the optimal design of the six-axis vibration isolator. The performance index of isotropy is considered to make the isolator minimum kinematic coupling in its working configuration. [ABSTRACT FROM AUTHOR]

This paper exploits screw theory expressed via unit dual quaternion representation and its algebra to formulate both the forward (position+velocity) kinematics and pose control of an n -dof robot arm in an efficient way. Efficiency is in less computer memory usage, in fast computation of the equations, in singularity-free representation of task space, in robustness to numerical errors, and in compactness of the representations. The formulation is simple, intuitive and straightforward to implement. We validated this formulation experimentally on a 7 dof robot arm. [ABSTRACT FROM AUTHOR]

In this paper, a new forward kinematic algorithm based on dual quaternion for a six-degree-of-freedom (DOF) general Stewart Platform is proposed. The algorithm is established after taking into account the pose parameters of joints and the D–H parameters of each branch chain, which yields a precise mathematic model with a total of 174 geometric parameters. The validity of the algorithm is tested using an inverse kinematic algorithm of a general serial manipulator. The forward kinematic algorithms for the 6-6R and 6-2RP3R mechanisms can be expressed by a unified mathematic model. The proposed algorithm can solve the difficult problem of forward kinematics for the unsolved 6-6R parallel manipulator and can also be applied to error analysis, error synthesis, kinematic calibration, stiffness analysis and the accurate kinematic simulation by analysing the effect of geometric parameters on the platform. [ABSTRACT FROM AUTHOR]