Search

Road traffic accidents occur frequently and seriously in the accident-prone spots. In order to improve the safety and efficiency of road traffic, it is necessary to find the location of accident-prone points. The existing density clustering algorithm needed to set the number of center points and was easy to expand the clustering range when identifying traffic accident-prone points, this paper proposed the limit cluster expansion and adaptive search clustering by fast search and find of density peaks (LA-CFDP) algorithm to solve these problems. LA-CFDP algorithm automatically determined the number of center points by increasing the restriction condition of center points, and introduced the parameter expansion factor to limit the cluster expansion range, so as to improve the adaptability and accuracy of the algorithm for accident-prone point identification. The case analysis on the 2019 traffic accident data set of four cities in United Kingdom shows that the Sihouette coefficient of the clustering results of LA-CFDP algorithm reaches 0.72～0.92, and the Davies-Bouldin index (DBI) are all reduced to below 0.37. The clustering results accord with the definition and characteristics of accident-prone spots, and can provide reliable basis for the management of accident-prone spots. [ABSTRACT FROM AUTHOR]

This paper presents an in-depth study on the short-term stiffness of hybrid prestressed concrete beams with bonded tendons and unbonded tendons. Calculation formulae of short-term stiffness were derived based on the double line theory. Multiple regression analysis is conducted for the reduction coefficient β0.5 used for the termination point of the stiffness calculation, based on the finite element results of 71 beams. Two formulae for the short-term stiffness of the hybrid prestressed concrete beams were proposed based on two different ways of calculating β0.5. The test data of 42 unbonded prestressed concrete beams and 31 bonded prestressed concrete beams collected from existing literatures verified the proposed stiffness formula. It’s suggested that the proposed formulae for short-term stiffness can also be applicable to bonded prestressed concrete beams and unbonded prestressed concrete beams. In addition, this paper presents an assessment of the accuracy of design formulae provided by a number of design standards, including GB 50010—2010, ACI 318-11, EN 1992-1-1:2004, for the short-term stiffness of prestressed concrete flexural members. [ABSTRACT FROM AUTHOR]

Soil respiration is mediated by microbial activities, temperature, humidity and other environmental factors in soil. The increase in use of microbial organic fertilizer and drip irrigation in greenhouse production could alter soil micro-environment, particularly the rhizosphere, thereby leading to a change in soil respiration. This paper investigated the response of soil respiration to different combinations of drip irrigation amounts and microbial organic fertilizer applications. We experimentally compared three irrigation amounts 15, 18 and 21 mm – associated with three microbial organic fertilizer applications 2800, 3600 and 4400 kg/hm². The treatment with inorganic fertilizer application served as the control. In each treatment, we measured soil respiration rate and accumulated carbon emission, as well as other determinants. The soil temperature and humidity were measured following the soil respiration measurement using the delta-T sensor (delta-T company, UK); soil organic matter was measured using the potassium dichromate sulfuric acid oxidation external heating method; the activity of dehydrogenase was determined using the TTC colorimetry method; the activity of urease was determined by the phenol sodium colorimetry method; the activity of catalase was determined by the KMnO4 volumetric method. We analyzed the responsive change in soil respiration to these determinants and root biomass. The results showed that, compared to the CK, drip irrigation and microbial organic fertilization improved soil organic matter and increased the activities of dehydrogenase, urease and catalase by 11.6%-27.6%, 8.0%-27.7% and 1.8%-11.2%, respectively; the increase in urease activities was at significant level (p<0.05). The soil respiration rate was positively correlated to the root biomass, temperature and organic matter content at significant level of p<0.01, and to the enzymatic activities at significant level of p<0.05. Among all treatments, irrigating 18 mm of water and applying 4400 kg/hm² of microbial organic fertilizer produced the highest root biomass, reaching 394 g/m² 120 days after the transplanting. Overall, combining drip irrigation and microbial organic fertilization increased root biomass by 25.9%-43.4%, compared to the CK. When irrigation amount was 15 and 18 mm, the carbon emission increased significantly (p<0.05) when the fertilizer application increased from 3600 kg/hm² to 4400 kg/hm². The cumulative carbon emission peaked at 415.2 g/m² when the irrigation amount was 18 mm and the microbial fertilization was 4400 kg/hm², significantly higher than that under other treatments (p<0.05). The lowest cumulative carbon emission was from the CK, being 255.3 g/m² only. In summary, this study showed that drip irrigation and microbial organic fertilization combined to impact soil carbon emission by changing organic matter content and root biomass in the soil. Our results have important implications for improving ecological cultivation in greenhouse production. [ABSTRACT FROM AUTHOR]

The prediction of deformation capacity of reinforced concrete (RC) columns is the foundation to realize performance-based seismic design. This paper presented a critical review of flexural-shear failure of columns based on Chinese design codes. The empirical formulas of ultimate deformation of RC columns were discussed, and the deficiencies of parametric model were revealed. The failure mode of flexural-shear, shear behavior and P-Δ effect are the main reasons for the scattering of the prediction of ultimate displacement. The length of plastic hinge is not a specific statistical sample. The prediction of ultimate displacement on the basis of equivalent plastic hinges method shows large scatter. In order to reveal the real shear demand in RC columns subjected to seismic loadings, the interaction between shear and flexural behaviors in plastic hinge zone should be taken into consideration. However, the corresponding simplified methods need to be improved. An effective method to evaluate the effect of shear on the deformation performance of columns is not available. In the GB 50010—2010 ‘Code for design of concrete structures’, the correction of the shear capacity formula for seismic design can effectively avoid the shear failure of columns under large displacement reversals, but the safety margin is different under varying ductility levels of ultimate displacement. The scatter of the prediction of GB 50010—2010 is larger than that of the original formula. Shear demand of identical columns under different test setups is not same due to the variety of P-Δ effect. The influence of P-Δ effect on the ultimate deformation capacity of RC columns depends failure modes. Finally, according to the relevant research in ultimate deformation, it is suggested that Chinese building code should be supplemented with an empirical formula for lower limit value of ultimate displacement by regression methods to improve performance-based design methods. [ABSTRACT FROM AUTHOR]

In current Chinese timber structure design codes, due to lack of a determination method, design strength value of domestic dimension lumber can only be determined with reference to the design method of sawn and log timber structure, which is dependent only upon wood species and is not related to visual grade and size of dimension lumber. For rational determination of the design strength value of domestic dimension lumber, full scale tests for bending strength were conducted on different visual grades (grade Ic, IIc, IIIc, IVc) of Chinese larch dimension lumber, and then reliability analysis on bending strength of domestic dimension lumber was carried out by the first order second moment method. In order to predict accurately the tail of probability distribution of bending strength, this paper has suggested that the mean value and standard deviation could be determined with the truncated 25% tested data of bending strength. The statistical mean vaule and coefficient of variation of geometry size of Chinese larch dimension lumber should be modified and be equal to 1.00 and 0.05, respectively. Based on reliability analysis results, relationships between reliability index and partial factor for different visual grades dimension lumber under different fitting data, probability distribution models of bending strength, load combinations, and load ratios were investigated. Finally, according to the target reliability requirements specified in the GB 50068—2001 ‘Unified standard for reliability design of building structures’, the partial factors for resistance and the corresponding design values of bending strength for Chinese larch dimension lumber were given. [ABSTRACT FROM AUTHOR]

In order to improve the survival ability of armored vehicles in the war, the protecting technology has been attached importance and developed completely by the world military powers. The paper presented the research state and protecting level of modern armor, and enumerated protecting furnishment of advanced armored vehicles, and summarized the research state and level of key protecting technology-armor material. After introducing situation of armor protecting technology, taking the research content of U. S. and U. K., the development trend to the modern armor technology-synthesis protection system were analyzed. [ABSTRACT FROM AUTHOR]