Search

In this study, amorphous tantalum oxide coatings were deposited onto the Ti substrate with and without plasma electrolytic oxidation (PEO)-pretreatment by using a high-powered impulse magnetron sputtering system. The antibacterial tests were conducted using Syto9 fluorescent dyes to study the antibacterial performance of Gram-positive (Staphylococcus aureus) and Gram-negative (Actinobacillus actinomycetemcomitans) bacteria. In vitro studies, the cell cytotoxicity and cell viability were evaluated with soft-tissue derived human skin fibroblasts and hard-tissue derived human osteosarcoma cells. The results of the antibacterial experiments revealed that both the Ta 2 O 5 and PEO-pretreated Ta 2 O 5 samples had superior antibacterial properties compared to the uncoated Ti samples. Cell viability analyses showed that the Ta 2 O 5 films with and without PEO pretreatment exhibited better cell growth compared to the Ti specimens in human skin fibroblasts and human osteosarcoma cells. The cell viability of PEO-pretreated Ta 2 O 5 films even two-fold higher than the Ti specimens in human osteosarcoma cells. In addition, no cytotoxicity was detected in both the Ta 2 O 5 and PEO-pretreated Ta 2 O 5 films. It concluded that porous Ta 2 O 5 film pretreated with PEO procedure possessed both great biocompatibility and antibacterial abilities. It might have highly potential to be a candidate for the surface materials of dental or orthopedic implants. • Amorphous Ta 2 O 5 are deposited by high-powered impulse magnetron sputtering. • The plasma electrolytic oxidation-pretreated Ta 2 O 5 has the highest hydrophilicity. • The Ta 2 O 5 coatings showed good antibacterial properties. • The cell viability of human skin fibroblasts is the highest for the Ta 2 O 5 coatings. • The MG-63 cell viability is the highest for the porous PEO-pretreated Ta 2 O 5 coatings. [ABSTRACT FROM AUTHOR]

Abstract: Titanium (Ti)-based materials have been used for dental and orthopedic implants because of their excellent biological compatibility, superior mechanical strength, and high corrosion resistance. The hypothesis of this present study was to manufacture the Zn-doped TiO2 layer possessing the biocompatibility and antibacterial ability on the surface of Ti specimens. TiO2, ZnO, and Ti(Zn)O2 coatings were deposited on polished pure Ti substrates using a cathodic arc deposition system. Murine osteoblasts (MC3T3-E1) and human Staphylococcus aureus (S. aureus) were cultured onto the surface with different deposited coatings, respectively. The biocompatibility was examined by cell viability and osteogenic gene expression. The antibacterial ability was determined by SYTO9 nucleic acid staining. A porous Zn-doped TiO2 coating was successfully produced. The ZnO exhibited a fibrous structure with nanorods showing a hydrophobic feature (contact angle approximately 89°). These material properties affected the following biological performance. The antibacterial testing found no apparent difference between the uncoated Ti plate and the TiO2 coating. However, significantly lower numbers of S. aureus were observed on ZnO and Ti(Zn)O2 coatings compared to that on the uncoated Ti. The biocompatible testing exhibited that TiO2 and Ti(Zn)O2 coatings enhanced greater cell viability and proliferation than the uncoated Ti plate and ZnO coating. The osteogenic gene expression of Dlx-5 and osterix also improved for the TiO2 and Ti(Zn)O2 coatings. However, a significant inhibition of cell viability was found for the ZnO coating. These findings suggested that the composite Ti(Zn)O2 coating with a lower content of Zn (7.6±1.3at.%) not only improved antibacterial activity, but also maintained the biocompatibility to bone cells. [Copyright &y& Elsevier]

Abstract: Titanium (Ti)-based materials have been used for dental/orthopedic implants due to their excellent biological compatibility, superior mechanical strength and high corrosion resistance. The osseointegration of Ti implants is related to their composition and surface treatment. Better biocompatibility and anti-bacterial performances of Ti implant are beneficial for the osseointegration and for avoiding the infection after implantation surgery. In this study, nanocomposite ZrCN/amorphous carbon (a-C) coatings with different carbon contents were deposited on a bio-grade pure Ti implant material. A cathodic-arc evaporation system with plasma enhanced duct equipment was used for the deposition of ZrCN/a-C coatings. Reactive gas (N2) and C2H2 activated by the zirconium plasma in the evaporation process were used to deposit the ZrCN/a-C coatings. To verify the susceptibility of implant surface to bacterial adhesion, Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans), one of the major pathogen frequently found in the dental implant-associated infections, was chosen for in vitro anti-bacterial analyses. In addition, the biocompatibility of human gingival fibroblast (HGF) cells on coatings was also evaluated by a cell proliferation assay. The results suggested that the ZrCN/a-C coatings with carbon content higher than 12.7at.% can improve antibacterial performance with excellent HGF cell compatibility as well. [Copyright &y& Elsevier]