Search

The problem of reducing ϵ -NN to (c , r) -NN is very important in theoretical computer science area and has attracted many research efforts. In this paper a new algorithm for such problem is proposed, which achieves O (log ⁡ n) query time. Comparing with the former algorithms for the same problem, this query time is the lowest, which is the main contribution of this paper. The low query time complexity is achieved by raising the preprocessing time and space complexity. How to reduce the cost added into the two complexities is also discussed in this paper. [ABSTRACT FROM AUTHOR]

• We consider a variant of the online buffer management problem. • This variant is called the 2-bounded delay buffer management problem with lookahead. • We design an optimal online algorithm for this variant. The bounded delay buffer management problem, which was proposed by Kesselman et al. (STOC 2001 and SIAM Journal on Computing 33(3), 2004), is an online problem focusing on buffer management of a switch supporting Quality of Service (QoS). The problem definition is as follows: Packets arrive to a buffer over time and each packet is specified by the release time , deadline and value. An algorithm can transmit at most one packet from the buffer at each integer time and can gain its value as the profit if transmitting the packet by its deadline after its release time. The objective of this problem is to maximize the gained profit. We say that an instance of the problem is s -bounded if for any packet, an algorithm has at most s chances to transmit it. For any s ≥ 2 , Hajek (CISS 2001) showed that the competitive ratio of any deterministic algorithm is at least (1 + 5) / 2 ≥ 1.618. Recently, Veselý et al. (SODA 2019) designed an online algorithm matching the lower bound. Böhm et al. (ISAAC 2016 and Theoretical Computer Science, 2019) introduced the lookahead ability to an online algorithm. At a time t , the algorithm obtains information about packets arriving at time t + 1 , and showed that for s = 2 , there is an algorithm which achieves the competitive ratio of (− 1 + 13) / 2 ≤ 1.303. Also, they showed that the competitive ratio of any deterministic algorithm is at least (1 + 17) / 4 ≥ 1.280. In this paper, for the 2-bounded model with lookahead, we design an algorithm with a matching competitive ratio of (1 + 17) / 4. [ABSTRACT FROM AUTHOR]

• Study the minsum k -sink problems on dynamic flow path networks for the confluent/non-confluent flow model. • Develop algorithms which run in almost linear time regardless of the number of sinks k. • Improve upon the previous results for the same problem with the confluent flow model. • Provide the first polynomial time algorithm for the problem with the non-confluent flow model. • The main theoretical contribution is to construct novel data structures for solving subproblems in polylogarithmic time. We address the facility location problems on dynamic flow path networks. A dynamic flow path network consists of an undirected path with positive edge lengths, positive edge capacities, and positive vertex weights. A path can be considered as a road, an edge length as the distance along the road and a vertex weight as the number of people at the site. An edge capacity limits the number of people that can enter the edge per unit time. In the dynamic flow network, given particular points on edges or vertices, called sinks , all the people evacuate from the vertices to the sinks as quickly as possible. The problem is to find the location of sinks on a dynamic flow path network in such a way that the aggregate evacuation time (i.e., the sum of evacuation times for all the people) to sinks is minimized. We consider two models of the problem: the confluent flow model and the non-confluent flow model. In the former model, the way of evacuation is restricted so that all the people at a vertex have to evacuate to the same sink, and in the latter model, there is no such restriction. In this paper, for both the models, we develop algorithms which run in almost linear time regardless of the number of sinks. It should be stressed that for the confluent flow model, our algorithm improves upon the previous result by Benkoczi et al. [Theoretical Computer Science, 2020], and one for the non-confluent flow model is the first polynomial time algorithm. [ABSTRACT FROM AUTHOR]

Abstract A locally connected spanning tree (LCST) T of a graph G is a spanning tree of G such that, for each node, its neighborhood in T induces a connected subgraph in G. The problem of determining whether a graph contains an LCST or not has been proved to be NP-complete, even if the graph is planar or chordal. The main result of this paper is a simple linear time algorithm that, given a maximal planar chordal graph, determines in linear time whether it contains an LCST or not, and produces one if it exists. We give an analogous result for the case when the input graph is a maximal outerplanar graph. [ABSTRACT FROM AUTHOR]

Finding heavy-elements (heavy-hitters) in streaming data is one of the central, and well-understood tasks. Despite the importance of this problem, when considering the sliding windows model of streaming (where elements eventually expire) the problem of finding L 2 -heavy elements has remained completely open despite multiple papers and considerable success in finding L 1 -heavy elements. Since the L 2 -heavy element problem doesn't satisfy certain conditions, existing methods for sliding windows algorithms, such as smooth histograms or exponential histograms are not directly applicable to it. In this paper, we develop the first polylogarithmic-memory algorithm for finding L 2 -heavy elements in the sliding window model. Our technique allows us not only to find L 2 -heavy elements, but also heavy elements with respect to any L p with 0 < p ≤ 2 on sliding windows. By this we completely “close the gap” and resolve the question of finding L p -heavy elements in the sliding window model with polylogarithmic memory, since it is well known that for p > 2 this task is impossible. We demonstrate a broader applicability of our method on two additional examples: we show how to obtain a sliding window approximation of the similarity of two streams, and of the fraction of elements that appear exactly a specified number of times within the window (the α -rarity problem). In these two illustrative examples of our method, we replace the current expected memory bounds with worst case bounds. [ABSTRACT FROM AUTHOR]

Recent research shows that significant energy saving can be achieved in wireless sensor networks (WSNs) with a mobile base station that collects data from sensor nodes via short-range communications. However, a major performance bottleneck of such WSNs is the significantly increased latency in data collection due to the low movement speed of mobile base stations. In this paper we study the problem of finding a data collection path for a mobile base station moving along a fixed track in a wireless sensor network to minimize the latency of data collection. The main contribution is an O ( m n log ⁡ n ) expected time algorithm, where n is the number of sensors in the networks and m is the complexity of the fixed track. [ABSTRACT FROM AUTHOR]

In this paper, we study 1-space bounded 2-dimensional bin packing and square packing. A sequence of rectangular items (square items) arrive one by one, each item must be packed into a square bin of unit size on its arrival without any information about future items. When packing items, 90°-rotation is allowed. 1-space bounded means there is only one “active” bin. If the “active” bin cannot accommodate the coming item, it will be closed and a new bin will be opened. The objective is to minimize the total number of bins used for packing all items in the sequence. Our contributions are as follows: For 1-space bounded 2-dimensional bin packing, we propose an online packing algorithm with a tight competitive ratio of 5.06. A lower bound of 3.17 on the competitive ratio is proven. Moreover, we study 1-space bounded square packing, where each item is a square with side length no more than 1. A 4.3-competitive algorithm is achieved, and a lower bound of 2.94 on the competitive ratio is given. All these bounds surpass the previously best known results. [ABSTRACT FROM AUTHOR]

The Maximum Agreement Forest problem ( MAF ) asks for a largest common subforest of a collection of phylogenetic trees. The MAF problem on two binary phylogenetic trees has been studied extensively in the literature. In this paper, we present a group of fixed-parameter tractable algorithms for the MAF problem on multiple (i.e., two or more) binary phylogenetic trees. Our techniques work fine for the problem for both rooted trees and unrooted trees. The computational complexity of our algorithms is comparable with that of the known algorithms for two trees, and is independent of the number of phylogenetic trees for which a maximum agreement forest is constructed. [ABSTRACT FROM AUTHOR]

With the fast development of social network services, network marketing of products with externalities has been attracting more and more attention from both academia and business. The extensive study on network marketing mainly concerns with positive externalities. The focus of this paper is on the much less understood counterpart for negative externalities, where a consumer has lower incentive to buy a product as the product is possessed by more social network neighbors. For a seller who markets these products, it is desirable to have a good schedule which specifies an order of consumers he approaches. We design polynomial time algorithms that find marketing schedules for products with negative externalities. The goals are two-fold: maximizing the product sale and ensuring consumer regret-free decisions. We show that the maximization is NP-hard. Our algorithms achieve satisfactory performance guarantees, approximating the maximum within constant factors in most of the cases. Two of these algorithms provide regret-proof schedules, reaching an equilibrium state where no consumers regret their previous decisions. Our work is the first attempt to address these marketing problems from an algorithmic point of view. [ABSTRACT FROM AUTHOR]

This paper presents a practical decision procedure for Propositional Projection Temporal Logic with infinite models. First, a set Prop l of labels l i , 0 ⩽ i ⩽ n ∈ N 0 , is used to mark nodes of an LNFG of a formula, and a node with l i is treated as an accepting state as in an automaton. Further, the generalized Büchi accepting condition for automata is employed to identify a path (resulting a word) in an LNFG as a model of the formula. In addition, the implementation details of the decision procedure and relevant algorithms including pre-processing, LNFG, circle finding algorithms are presented; as a matter of fact, all algorithms are implemented by C++ programs. [ABSTRACT FROM AUTHOR]

The advice complexity of an online problem describes the additional information both necessary and sufficient for online algorithms to compute solutions of a certain quality. In this model, an oracle inspects the input before it is processed by an online algorithm. Depending on the input string, the oracle prepares an advice bit string that is accessed sequentially by the algorithm. The number of advice bits that are read to achieve some specific solution quality can then serve as a fine-grained complexity measure. The main contribution of this paper is to study a powerful method for proving lower bounds on the number of advice bits necessary. To this end, we consider the string guessing problem as a generic online problem and show a lower bound on the number of advice bits needed to obtain a good solution. We use special reductions from string guessing to improve the best known lower bound for the online set cover problem and to give a lower bound on the advice complexity of the online maximum clique problem. [ABSTRACT FROM AUTHOR]

Given a connected outerplanar graph G of pathwidth p , we give an algorithm to add edges to G to get a supergraph of G , which is 2-vertex-connected, outerplanar and of pathwidth O ( p ) . This settles an open problem raised by Biedl [1] , in the context of computing minimum height planar straight line drawings of outerplanar graphs, with their vertices placed on a two-dimensional grid. In conjunction with the result of this paper, the constant factor approximation algorithm for this problem obtained by Biedl [1] for 2-vertex-connected outerplanar graphs will work for all outer planar graphs. [ABSTRACT FROM AUTHOR]

This paper presents an approach for verifying the correctness of the feasibility theorem on the deadline driven scheduler (DDS) with the axiom system of Propositional Projection Temporal Logic (PPTL). To do so, the deadline driven scheduling algorithm is modeled by an MSVL (Modeling, Simulation and Verification Language) program and the feasibility theorem is formulated by PPTL formulas with two parts: a necessary part and a sufficient part. Then, several lemmas are abstracted and proved by means of the axiom system of PPTL. With the help of the lemmas, two parts of the theorem are deduced respectively. This case study convinces us that some real-time properties of systems can be formally verified by theorem proving using the axiom system of PPTL. [ABSTRACT FROM AUTHOR]

Pushdown systems (PDS) are well adapted to model sequential programs with (possibly recursive) procedure calls. Therefore, it is important to have efficient model checking algorithms for PDSs. We consider in this paper CTL model checking for PDSs. We consider the “standard” CTL model checking problem where whether a configuration of a PDS satisfies an atomic proposition or not depends only on the control state of the configuration. We consider also CTL model checking with regular valuations, where the set of configurations in which an atomic proposition holds is a regular language. We reduce these problems to the emptiness problem in Alternating Büchi Pushdown Systems, and we give an algorithm to solve this emptiness problem. Our algorithms are more efficient than the other existing algorithms for CTL model checking for PDSs in the literature. We implemented our techniques in a tool, and we applied it to different case studies. Our results are encouraging. In particular, we were able to confirm the existence of known bugs in Linux source code. [ABSTRACT FROM AUTHOR]