Search

Anger suppression is important in our daily life, as its failure can sometimes lead to the breaking down of relationships in families. Thus, effective strategies to suppress or neutralise anger have been examined. This study shows that physical disposal of a piece of paper containing one's written thoughts on the cause of a provocative event neutralises anger, while holding the paper did not. In this study, participants wrote brief opinions about social problems and received a handwritten, insulting comment consisting of low evaluations about their composition from a confederate. Then, the participants wrote the cause and their thoughts about the provocative event. Half of the participants (disposal group) disposed of the paper in the trash can (Experiment 1) or in the shredder (Experiment 2), while the other half (retention group) kept it in a file on the desk. All the participants showed an increased subjective rating of anger after receiving the insulting feedback. However, the subjective anger for the disposal group decreased as low as the baseline period, while that of the retention group was still higher than that in the baseline period in both experiments. We propose this method as a powerful and simple way to eliminate anger. [ABSTRACT FROM AUTHOR]

Energy storage devices (ESD) which are intended to power electronic devices, used in close contact of human skin, are desirable to be safe and non-toxic. In light of this requirement, Zn based energy storage devices seem to provide a viable pathway as they mostly employ aqueous based electrolytes which are safe and non-toxic in their functioning. Additionally, having a flexible ESD will play a crucial role as it will enable the ESD to conform to the varying shapes and sizes of wearable electronics which they energize. In this work, we have developed an inkjet-printed Zinc ion battery (IPZIB) with planar electrode configuration over bond paper substrate. Zn has been used as the negative electrode, MnO2 is used as the positive electrode with Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the active binder. Conducting tracks of reduced graphene oxide (rGO) are used to construct the current collector on the paper substrate. The fabricated IPZIB delivered a high discharge capacity of 300.14 mAh g−1 at a current density of 200 mA g−1. The energy density of the IPZIB is observed as 330.15 Wh kg−1 at a power density of 220 W kg−1 and retains an energy density of 94.36 Wh kg−1 at a high power density of 1650 W kg−1. Finally, we have demonstrated the capability of the IPZIB to power a LED at various bending and folding conditions which indicates its potential to be used in the next generation flexible and wearable electronic devices. [ABSTRACT FROM AUTHOR]

As the social organism, Polistes wasps build a communal nest using woody fibers with saliva for sustaining brood and adult population throughout the season. Limited information exists regarding the identification specific plant materials employed in wasp nest building. Thus, we firstly tested if the DNA metabarcoding approach utilizing rbcL and trnL molecular markers could identify the plant species quantitatively and qualitatively inform the mixed-origin woody samples. A threshold of 0.01 proportion of reads was applied for rbcL and trnL molecular markers, while this threshold for median proportion was 0.0025. In assessing taxa richness, the median proportion demonstrated superior performance, exhibiting higher taxa detection power, however, rbcL marker outperformed in quantitative analysis. Subsequently, we applied DNA metabarcoding to identify the plant materials from the nests of two Polistes species, P. mandarinus and P. rothneyi. The results showed that higher preference of Quercus and Robinia as the major nest building materials regardless of the surrounding plant communities, by two wasp species. Material diversity was higher for P. rothneyi than P. mandarinus, which may explain the abundance of this species possibly with heightened adaptive capacities in their nesting behavior. This study demonstrated that DNA metabarcoding could identify the complex nest-building plant materials of paper wasps and provide insights into their ecological interactions in the natural ecosystem. [ABSTRACT FROM AUTHOR]

Metagenomics has revolutionized access to genomic information of microorganisms inhabiting the gut of herbivorous animals, circumventing the need for their isolation and cultivation. Exploring these microorganisms for novel hydrolytic enzymes becomes unattainable without utilizing metagenome sequencing. In this study, we harnessed a suite of bioinformatic analyses to discover a novel cellulase-degrading enzyme from the camel rumen metagenome. Among the protein-coding sequences containing cellulase-encoding domains, we identified and subsequently cloned and purified a promising candidate cellulase enzyme, Celcm05-2, to a state of homogeneity. The enzyme belonged to GH5 subfamily 4 and exhibited robust enzymatic activity under acidic pH conditions. It maintained hydrolytic activity under various environmental conditions, including the presence of metal ions, non-ionic surfactant Triton X-100, organic solvents, and varying temperatures. With an optimal temperature of 40 °C, Celcm05-2 showcased remarkable efficiency when deployed on crystalline cellulose (> 3.6 IU/mL), specifically Avicel, thereby positioning it as an attractive candidate for a myriad of biotechnological applications spanning biofuel production, paper and pulp processing, and textile manufacturing. Efficient biodegradation of waste paper pulp residues and the evidence of biopolishing suggested that Celcm05-2 can be used in the bioprocessing of cellulosic craft fabrics in the textile industry. Our findings suggest that the camel rumen microbiome can be mined for novel cellulase enzymes that can find potential applications across diverse biotechnological processes. [ABSTRACT FROM AUTHOR]

To achieve integrated resource utilization of graphite tailings to improve their water-holding capacity, river silt and cow dung powder were added to graphite tailings as organic matter improvers. Improver ratios were designed using 4 g cow dung powder and 20, 30, and 50 g river silt. Soil–water characterization tests were performed using a combined tensiometer and filter paper method based on optimum density measurements. Analysis of the influence of river silt dosing on the soil–water characteristic curves of improved graphite tailing specimens was performed with data fitting using the Van Genuchten model. Here, we investigated the effect of river silt dosing on the internal pore structure and water-holding capacity of modified graphite tailing samples and verified the applicability of the model to graphite tailings. Our results demonstrate that the organic matter improver incorporated into graphite tailings can improve the internal structural compactness of graphite tailings, improving the water holding capacity. With an increase in river silt dosage, the saturated water content is larger, and the residual water content increases and then decreases. When river silt dosage is 30 g, the residual water content is the highest at a value of 3.32%. The van Genuchten model was highly accurate for assessing the graphite tailings. With an increase in river silt doping, the internal pore space first decreased and then increased, and the internal structure gradually became compact and loosened. The internal structure was in the optimal state in the experimental study when the dosage of cow dung powder was 4 g and the dosage of river silt was 30 g. The water holding capacity was optimal at this time. The results of this study provide a theoretical foundation for graphite-tailing-based mine reclamation and play a guiding role in exploring the value of the hydraulic characteristic index parameters when applying graphite tailings engineering. [ABSTRACT FROM AUTHOR]

For shaped charge blasting projects in mining, civil engineering, and similar fields, it is proposed to modify the charge structure by combining slotted tubes and shaped charge liners to obtain a new type of charge structure. This aims to achieve directional rock breaking through the focused action of the shaped charge. The influence of different slotted pipe materials on the directional rock-breaking effect of concentrated energy using a new charge structure is explored through theoretical analysis combined with model test study, high-speed camera, stress–strain gauge, and other equipment. A comparison is made between slotted pipes made of aluminum, kraft paper, and PVC, with the cutting width of 2 mm. Based on the characteristics of the cracks formed after blasting, the new charge structure made of aluminum slotted pipe produces a penetrating crack that is almost consistent with the pre-cracking direction. Based on the corresponding characteristics of successively released blasting energy, the guiding and convergence effect of the new charge structure made of aluminum slotted pipe on the explosion energy is greater than that of the new charge structure made of the other two types of slotted pipe material. According to the strain data measured after blasting, the peak arrival time of the strain peak in the direction of the slotted pipe on one side of the shaped hood is shorter than that in the other two directions, and the peak strain is greater than that in the other two directions while having a better energy gathering effect. Based on the findings, the new charge structure with directional energy concentration has a damage reduction effect. Furthermore, the material of aluminum slotted pipe is found to be better than PVC slotted pipe, whereas the material of PVC slotted pipe is better than kraft paper slotted pipe in achieving directional rock breaking. [ABSTRACT FROM AUTHOR]

The ever-growing threats in cybersecurity growing with the rapid development of quantum computing, necessitates the development of robust and quantum-resistant cryptographic systems. This paper introduces a novel cryptosystem, Public Key Cryptosystem based on Systematic Polar Encoding (PKC-SPE), based on the combination of systematic polar encoding and public-key cryptographic principles. The Systematic Polar Encoding (SPE), derived from the well-established field of polar codes, serves as the foundation for this proposed cryptographic scheme. Here, we have used MATLAB Software to introduce and implement the PKC-SPE Cryptosystem. The paper examines key generation, encryption, and decryption algorithms, providing insights into the adaptability and efficiency of systematic polar encoding in public-key cryptography. We assess the efficiency of the PKC-SPE Cryptosystem in three aspects: key size, computational complexity, and system implementation timings. In addition, we compare the PKC-SPE Cryptosystem with PKC-PC cryptosystem and find that it has reduced key sizes ( P r = 0.8436 kbytes). The results obtained through simulations validate the effectiveness of the proposed cryptosystem and highlighting its potential for integration into real-world communication systems. Thus, in the paradigm shift to quantum computing, the PKC-SPE cryptosystem emerges as a promising candidate to secure digital communication in the quantum computing era. [ABSTRACT FROM AUTHOR]

Optical cross-correlation is a technique that can achieve both high specificity and high sensitivity when deployed as the basis for a sensing technology. Offering significant gains in cost, size and complexity, it can also deliver significantly higher signal-to-noise ratios than traditional approaches such as absorption methodologies. In this paper, we present an optical cross-correlation technology constructed around a bespoke customised Fiber Bragg Grating (FBG). Exploiting the remarkable flexibility in design enabled by multiple aperiodic Bragg gratings, optical filters are devised that exactly mimic the absorption features of a target gas species (for this paper, acetylene C 2 H 2 ) over some waveband of interest. This grating forms the heart of the sensor architecture described here that employs modulated optical cross-correlation for gas detection. An experimental demonstration of this approach is presented, and shown to be capable of differentiating between different concentrations of the C 2 H 2 target gas. Furthermore these measurements are shown to be robust against interloper species, with minimal impact on the detection signal-to-noise arising from the introduction of contaminant gases. This represents is a significant step toward the use of customised FBGs as low-cost, compact, and highly customisable photonic devices for deployment in gas detection. [ABSTRACT FROM AUTHOR]

In Geophysics, topographic factors are observations that can be directly measured, but they are often ignored to simplify the model. Studying the coseismic deformation caused by earthquakes helps accurately determine the epicenter's parameterization. It provides a reference for the reasonable layout of coseismic observation stations and GNSS observation stations. After the Mw7.8 earthquake in Nepal in 2015, GCMT, USGS, GFZ, CPPT, and other institutions released their epicenter parameter. However, according to their parameters, the coseismic displacements simulated by the spectral-element method are quite different from the GNSS observations. Firstly, this paper inverts the geometric parameters of the seismogenic fault with Nepal's coseismic GNSS displacement. The spectral-element method determines the source's location and depth under the heterogeneous terrain and outputs the source parameters. Among the results of many studies, the surface source is more consistent with the generation mechanism of large earthquakes. Secondly, this paper calculates the fault slip distribution of this earthquake using SDM (Steepest Descent Method) based on GNSS and InSAR data, which is divided into 1500 subfaults, and the moment tensor of each subfault is calculated. This paper investigates the distribution characteristics of the coseismic deformation field of the 2015 Mw 7.8 earthquake in Nepal under three different models. The results show that the influence of topographic factors is ~ 20%, and the influence of heterogeneous factors is ~ 10%. This paper concludes that the influence of topographic factors is much more significant than that of heterogeneous factors, and the influence of both should be addressed in coseismic deformation calculations. [ABSTRACT FROM AUTHOR]

Infrared thermal imaging is a passive non-contact detection and identification technology, which is not subject to electromagnetic infection and good concealment, is widely used in military and commercial fields. However, due to the limitations of the existing infrared imaging system mechanisms, the spatial resolution of the acquired infrared images is low and the edge details are blurred, which in turn leads to poor performance in downstream missions based on infrared images. In this paper, in order to better solve the above problems, we propose a new super-resolution reconstruction framework for infrared images, called DBFE, which extracts and retains abundant structure and textual information for robust infrared image high-resolution reconstruction with a novel structure-textual encoder module. Extensive experiment demonstrates that our proposed method achieves significantly superior contraband high-resolution reconstruction results on the multiple dataset compared to progressive methods for high resolution infrared image reconstruction, effectively proving the practicability of the method proposed in this paper. [ABSTRACT FROM AUTHOR]