Search

Active and passive microwave signals over land co-vary depending on their shared scattering and emission characteristics by soil and vegetation media. Estimates of this covariation can be used beneficially to downscale coarse-resolution brightness temperatures with high-resolution backscatter for enhanced-resolution Earth observations. In this study, a forward model of covariation for vegetated soil is derived by combining two well-established models of active and passive microwave interactions. The covariation model is inverted to obtain a single-pass observation-driven estimation of active-passive microwave covariation (β) based on multi-channel radiometer and Synthetic Aperture Radar (SAR) scenes. A key feature of the estimation approach is that it is applicable to co-located spatial data scenes and does not rely on temporal information. We present applications of the estimation with combinations of SMAP (L-band) radiometry and both SMAP (L-band) and multi-angular Sentinel-1 (C-band) backscatter data. We first show that for the period of available SMAP L-band radiometer and radar data, the estimation approach for β , introduced in this study, yields similar results as the statistical time-series approach originally designed for SMAP. The new single-pass approach also allows estimation of active-passive covariation where the statistical approach cannot be applied because dynamic range of brightness temperature and backscatter are too limited to allow regression. We then apply the developed estimation method to SMAP L-band radiometer and multi-angular Sentinel-1 C-band SAR data. Here, the study quantifies the effects of microwave frequency and look-angles on the covariation by applying the estimation globally and analyzing the results as a function of vegetation cover – a key determinant of the strength of the covariation. • A single-pass estimation of active-passive microwave covariation is established. • The approach allows estimation of covariation without the need for time series. • It is observation-driven and does not require site-specific calibration. • It enables global downscaling of SMAP radiometer with Sentinel-1 radar data. [ABSTRACT FROM AUTHOR]

Systematic Sentinel-1 acquisitions provide an unprecedented stream of SAR data which allows to describe forest temporal dynamics in detail, a powerful tool for phenological studies and forest type classification. Several studies have explored the temporal variation of backscatter intensity in this context, but none considered that scattering directionality of canopies may vary. Said directionality is related to target-sensor geometry (incidence angle), forest height, and optical depth, associated with leaf dynamics. This study explicitly models backscatter dependance on incidence angle by fitting a regression model for each Sentinel-1 image and forest type. Residuals are accumulated across the time series and used to classify pixels into the most likely forest type using the smallest accumulated residual. This modelling and classification strategy has been applied over a North-South transect across the Carpathian Mountains, including forests with different physiognomies, from deciduous broadleaf forest, to mixed broadleaf-needleleaf and pure perennial needleleaf forests. These forests were classified with increasing detail, assessing the results against in-situ forest stand data and satellite-based land cover classification products (Copernicus Forest type layer). The accuracy of our classification was K > 0.8, OA > 90% when separating broadleaf from needleleaf forest types. The accuracy decreased (K > 0.6, OA > 79%) when also separating mixed forest types. Our results suggest that incorporating directional effects into classification models can improve SAR-based forest classification of temperate forest over mountainous terrain. Furthermore, models fitted between backscatter and incidence angle provide an estimate of n , a parameter related to optical depth that has been shown to vary with leaf dynamics. n could be used to improve image normalization in studies aiming at the estimation of biomass, or to aid the estimation of fast-changing parameters such as leaf area index or leaf moisture content. • Backscatter/incidence angle relationship depends on the season. • Common γ 0 normalization may be inadequate for images acquired during the winter. • Forest types have a characteristic temporal signature for backscatter and opacity. • Temporal signatures separated broadleaf and needleleaf forest with 90% accuracy. • When separating mixed forest, the class had 47% omission and 72% commission error. [ABSTRACT FROM AUTHOR]

Agricultural land cover is characterized by strong variations within relatively short time intervals. These dynamics are challenging for land cover classifications on the one hand, but deliver crucial information that can be used to improve the classifiers performance on the other hand. Since up to date mapping of crops is crucial to assess the impact of agricultural land use on the ecosystems, an accurate and complete classification of crop types is of high importance. In the presented study, a new multitemporal data based classification approach was developed that incorporates knowledge about the phenological changes on crop lands. It identifies phenological sequence patterns (PSP) of the crop types based on a dense stack of Sentinel-1 data and accurate information about the plant's phenology. The performance of the developed methodology has been tested for two different vegetation seasons using over 200 ground truth fields located in northern Germany. The results showed that a dense time series of Sentinel-1 images allowed for high classification accuracies of grasslands, maize, canola, sugar beets and potatoes (F1-score above 0.8) using PSP as well as standard (Random Forest and Maximum Likelihood) classification method. The PSP approach clearly outperformed standard methods for cereal crops, especially for spring barley where the F1-score varied between zero and 0.43 for standard approaches, while PSP achieved values as high as 0.74 and 0.79 for both vegetation seasons. The PSP based approach also outperformed for oat, winter barley and rye. Furthermore, the PSP classification is more resilient to differences in farming management and conditions of growth since it takes information about each crop types' growing stage and its growing period into consideration. The results also indicate, that the PSP approach was more sensitive to subtle changes such as the proportion of weeds within a field. [ABSTRACT FROM AUTHOR]

Detailed maps of forest structure attributes are crucial for sustainable forest management, conservation, and forest ecosystem science at the landscape level. Mapping the structure of broad heterogeneous forests is challenging, but the integration of extensive field inventory plots with wall-to-wall metrics derived from synthetic aperture radar (SAR) and optical remote sensing offers a potential solution. Our goal was to map forest structure attributes (diameter at breast height, basal area, mean height, dominant height, wood volume and canopy cover) at 30-m resolution across the diverse 463,000 km2 of native forests of Argentina based on SAR Sentinel-1, vegetation metrics from Sentinel-2 and geographic coordinates. We modelled the forest structure attributes based on the latest national forest inventory, generated uncertainty maps, quantified the contribution of the predictors, and compared our height predictions with those from GEDI (Global Ecosystem Dynamics Investigation) and GFCH (Global Forest Canopy Height). We analyzed 3788 forest inventory plots (1000 m2 each) from Argentina's Second Native Forest Inventory (2015–2020) to develop predictive random forest regression models. From Sentinel-1, we included both VV (vertical transmitted and received) and VH (vertical transmitted and horizontal received) polarizations and calculated 1st and 2nd order textures within 3 × 3 pixels to match the size of the inventory plots. For Sentinel-2, we derived EVI (enhanced vegetation index), calculated DHIs (dynamic habitat indices (annual cumulative, minimum and variation) and the EVI median, then generated 1st and 2nd order textures within 3 × 3 pixels of these variables. Our models including metrics from Sentinel-1 and 2, plus latitude and longitude predicted forest structure attributes well with root mean square errors (RMSE) ranging from 23.8% to 70.3%. Mean and dominant height models had notably good performance presenting relatively low RMSE (24.5% and 23.8%, respectively). Metrics from VH polarization and longitude were overall the most important predictors, but optimal predictors differed among the different forest structure attributes. Height predictions (r = 0.89 and 0.85) outperformed those from GEDI (r = 0.81) and the GFCH (r = 0.66), suggesting that SAR Sentinel-1, DHIs from Sentinel-2 plus geographic coordinates provide great opportunities to map multiple forest structure attributes for large areas. Based on our models, we generated spatially-explicit maps of multiple forest structure attributes as well as uncertainty maps at 30-m spatial resolution for all Argentina's native forest areas in support of forest management and conservation planning across the country. • Nationwide mapping of multiple forest structure attributes at 30-m resolution. • Uncertainty maps of each forest structure attribute at 30-m resolution. • Best predictors were a combination of Sentinel-1 and 2 data plus coordinates. • Forest height predictions outperformed those from GEDI and the GFCH. • Reliable predictions to support sustainable forest management in Argentina. [ABSTRACT FROM AUTHOR]

Remote sensing-based approaches are important for evaluating ecosystem degradation and the efficient planning of ecosystem restoration efforts. However, the large majority of remote sensing-based degradation assessments are trend-based, implying that they can only detect degradation that occurred after medium or high-resolution satellite imagery became available. This makes them less suitable to map long-term degradation in ecosystems that have been under high human pressure since before. The main goal of this study was to develop a robust operational approach to map forest degradation status in heterogeneous landscapes with a long-standing degradation history to inform the planning of restoration interventions. We hereby use the tropical dry forests of Lambayeque, Peru, as a case study. Instead of using a trend-based assessment, we evaluated forest degradation status by comparing current woody cover (WC) and aboveground biomass (AGB) estimates obtained from remote sensing imagery with benchmark values consisting of the 95th percentile WC and AGB values inside environmentally homogenous land capability classes. Using boosted regression tree models and a combination of optical (Sentinel-2) and synthetic aperture radar (Sentinel-1) data of different seasons, we mapped WC and AGB, using training data obtained through very high-resolution imagery and field measurements. Further, we aimed at assessing (i) whether the inclusion of Sentinel-1 data improves mapping accuracy in comparison to using only Sentinel-2 data, and (ii) whether the use of multi-seasonal data improves accuracy in comparison to single-season data. Models combining multi-seasonal Sentinel-1 and Sentinel-2 data resulted in the most accurate WC predictions (mean absolute error (MAE): 16%; MAE normalized by dividing by the inter-quartile range of training data: 26%) and AGB predictions (MAE: 28.6 t/ha; normalized MAE: 65%), but differences in predictive accuracy with single season models or models using only Sentinel-2 data were small. The most accurate models estimated an average WC of 41% and an average AGB of 23.4 t/ha. Average WC and AGB reduction due to degradation was 35% and 36%, respectively, indicating that these forests are highly degraded. The site-specific scaling of WC and AGB allows to efficiently estimate forest degradation status irrespective of the time when this degradation occurred, and to express degradation status against site-specific benchmarks. On the condition that there are still some areas that are sufficiently undegraded to be used as a benchmark, the approach can be used to prioritize forest restoration actions and inform targets for restoration in heterogeneous landscapes suffering the impacts of undocumented long-term degradation. • Mapping woody cover (WC) and aboveground biomass (AGB) in dry forest. • Multi-season models with Sentinel-1 and Sentinel-2 data were most accurate. • Time-series methods can only detect degradation after onset satellite record. • We used site-specific benchmarks to quantify long-term degradation status. • Average WC and AGB reduction relative to benchmarks was 35% and 36%. [ABSTRACT FROM AUTHOR]

• Sentinel-1 L2 radial velocity products suffer from uncorrected biases up to 2 m/s. • Simple land calibration method is described and applied to 78 snapshots. • Corrected Sentinel-1 radial current has a precision of 0.25 m/s against HF radar. • Better results when sea state is taken into account for WASV correction in this coastal area. Direct sensing of total ocean surface currents with microwave Doppler signals is a growing topic of interest for oceanography, with relevance to several new ocean mission concepts proposed in recent years. Since 2014, the spaceborne C-band SAR instruments of the Copernicus Sentinel-1 (S1) mission routinely acquire microwave Doppler data, distributed to users through operational S1 Level-2 ocean radial velocity (L2 OCN RVL) products. S1 L2 RVL data could produce high-resolution maps of ocean surface currents that would benefit ocean observing and modelling, particularly in coastal regions. However, uncorrected platform effects and instrument anomalies continue to impact S1 RVL data and prevent direct exploitation. In this paper, a simple empirical method is proposed to calibrate and correct operational S1 L2 RVL products and retrieve two-dimensional maps of surface currents in the radar line-of-sight. The study focuses on the German Bight where wind, wave and current data from marine stations and an HF radar instrumented site provide comprehensive means to evaluate S1 retrieved currents. Analyses are deliberately limited to Sentinel-1A (S1A) ascending passes to focus on one single instrument and fixed SAR viewing geometry. The final dataset comprises 78 separate S1A acquisitions over 2.5 years, of which 56 are matched with collocated HF radar data. The empirical corrections bring significant improvements to S1A RVL data, producing higher quality estimates and much better agreement with HF radar radial currents. Comparative evaluation of S1A against HF radar currents for different WASV corrections reveal that best results are obtained in this region when computing the WASV with sea state rather than wind vector input. Accounting for sea state produces S1 radial currents with a precision (std of the difference) around 0.3 m/s at ∼1 km resolution. Precision improves to ∼0.24 m/s when averaging over 21 × 27 km2, with correlations with HF radar data reaching up to 0.93. Evidence of wind-current interactions when tides and wind align and short fetch conditions call for further research with more satellite data and other sites to better understand and correct the WASV in coastal regions. Finally, 1 km resolution maps of climatological S1A radial currents obtained over 2.5 years reveal strong coastal jets and fine scale details of the coastal circulation that closely match the known bathymetry and deep-water coastal channels in this region. The wealth of oceanographic information in corrected S1 RVL data is encouraging for Doppler oceanography from space and its application to observing small scale ocean dynamics, atmosphere and ocean vertical exchanges and marine ecosystem response to environmental change. [ABSTRACT FROM AUTHOR]

Around 350 million hectares of land are affected by wildfires every year influencing the health of ecosystems and leaving a trail of destruction. Accurate information over burned areas (BA) is essential for governments and communities to prioritize recovery actions. Prior research over the past decades has established the potentials and limitations of space-borne earth observation for mapping BA over large geographic areas at various scales. The operational deployment of Sentinel-1 and Sentinel-2 constellations significantly improved the quality and quantity of the imagery from the microwave (C-band) and optical regions on the spectrum. Based on that, this study set to investigate whether the existing coarse BA products can be further improved by the synergy of optical surface reflectance (SR), radar backscatter coefficient (BS), and/or radar interferometric coherence (COR) data with higher spatial resolutions. A Siamese Self-Attention (SSA) classification strategy is proposed for the multi-sensor BA mapping and a multi-source dataset is constructed at the object level for the training and testing. Results are analyzed by test sites, feature sources, and classification strategies to appraise the improvements achieved by the proposed method. • Sentinel-1 and Sentinel-2 data are synergistically used for burned area mapping. • A small object dataset is constructed over 12 California fires in 2018–2019. • A deep-learning-based method is applied to discriminate burns and unburns. • Performance is assessed over different data sources, test sites, and classifiers. • The flexibility of the trained classifier is evaluated over independent sites. [ABSTRACT FROM AUTHOR]

Sentinel-1 Synthetic Aperture Radar (SAR) data have provided an unprecedented opportunity for crop monitoring due to its high revisit frequency and wide spatial coverage. The dual-pol (VV-VH) Sentinel-1 SAR data are being utilized for the European Common Agricultural Policy (CAP) as well as for other national projects, which are providing Sentinel derived information to support crop monitoring networks. Among the Earth observation products identified for agriculture monitoring, indicators of vegetation status are deemed critical by end-user communities. In literature, several experiments usually utilize the backscatter intensities to characterize crops. In this study, we have jointly utilized the scattering information in terms of the degree of polarization and the eigenvalue spectrum to derive a new vegetation index from dual-pol (DpRVI) SAR data. We assess the utility of this index as an indicator of plant growth dynamics for canola, soybean, and wheat, over a test site in Canada. A temporal analysis of DpRVI with crop biophysical variables (viz., Plant Area Index (PAI), Vegetation Water Content (VWC), and dry biomass (DB)) at different phenological stages confirms its trend with plant growth dynamics. For each crop type, the DpRVI is compared with the cross and co-pol ratio (σ VH 0/ σ VV 0) and dual-pol Radar Vegetation Index (RVI = 4 σ VH 0/(σ VV 0 + σ VH 0)), Polarimetric Radar Vegetation Index (PRVI), and the Dual Polarization SAR Vegetation Index (DPSVI). Statistical analysis with biophysical variables shows that the DpRVI outperformed the other four vegetation indices, yielding significant correlations for all three crops. Correlations between DpRVI and biophysical variables are highest for canola, with coefficients of determination (R 2) of 0.79 (PAI), 0.82 (VWC), and 0.75 (DB). DpRVI had a moderate correlation (R 2≳ 0.6) with the biophysical parameters of wheat and soybean. Good retrieval accuracies of crop biophysical parameters are also observed for all three crops. • Proposed a new dual-pol radar vegetation index for Sentinel-1. • DpRVI follows the phenological trend with plant growth. • Investigated Dop and eigenvalue spectrum of dual-pol data to map crop condition. • DpRVI outperforms VH/VV and RVI for correlations with biophysical parameters. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) amplitude measurements from spaceborne sensors are sensitive to surface roughness conditions near their radar wavelength. These backscatter signals are often exploited to assess the roughness of plowed agricultural fields and water surfaces, and less so to complex, heterogeneous geological surfaces. The bedload of mixed sand- and gravel-bed rivers can be considered a mixture of smooth (compacted sand) and rough (gravel) surfaces. Here, we assess backscatter gradients over a large high-mountain alluvial river in the eastern Central Andes with aerially exposed sand and gravel bedload using X-band TerraSAR-X/TanDEM-X, C-band Sentinel-1, and L-band ALOS-2 PALSAR-2 radar scenes. In a first step, we present theory and hypotheses regarding radar response to an alluvial channel bed. We test our hypotheses by comparing backscatter responses over vegetation-free endmember surfaces from inside and outside of the active channel-bed area. We then develop methods to extract smoothed backscatter gradients downstream along the channel using kernel density estimates. In a final step, the local variability of sand-dominated patches is analyzed using Fourier frequency analysis, by fitting stretched-exponential and power-law regression models to the 2-D power spectrum of backscatter amplitude. We find a large range in backscatter depending on the heterogeneity of contiguous smooth- and rough-patches of bedload material. The SAR amplitude signal responds primarily to the fraction of smooth-sand bedload, but is further modified by gravel elements. The sensitivity to gravel is more apparent in longer wavelength L-band radar, whereas C- and X-band is sensitive only to sand variability. Because the spatial extent of smooth sand patches in our study area is typically <50 m, only higher resolution sensors (e.g., TerraSAR-X/TanDEM-X) are useful for power spectrum analysis. Our results show the potential for mapping sand-gravel transitions and local geomorphic complexity in alluvial rivers with aerially exposed bedload using SAR amplitude. • SAR amplitude data are used to measure alluvial channel-bed roughness. • Backscatter gradients are mostly due to changes in smooth sand-surface contribution. • L-band SAR has a more dynamic backscatter signal, modified by gravel size. • 5-m resolution SAR can assess localized spatial extents of sand-gravel patchiness. [ABSTRACT FROM AUTHOR]

The quantification of vegetation height for the circumpolar Arctic tundra biome is of interest for a wide range of applications, including biomass and habitat studies as well as permafrost modelling in the context of climate change. To date, only indices from multispectral data have been used in these environments to address biomass and vegetation changes over time. The retrieval of vegetation height itself has not been attempted so far over larger areas. Synthetic Aperture Radar (SAR) holds promise for canopy modeling over large extents, but the high variability of near-surface soil moisture during the snow-free season is a major challenge for application of SAR in tundra for such a purpose. We hypothesized that tundra vegetation height can be derived from multispectral indices as well as from C-band SAR data acquired in winter (close to zero liquid water content). To test our hypothesis, we used C-band SAR data from Sentinel-1 and multi-spectral data from Sentinel-2. Results show that vegetation height can be derived with an RMSE of 44 cm from Normalized Difference Vegetation Index (NDVI) and 54 cm from Tasseled Cap Wetness index (TC). Retrieval from C-band SAR shows similar performance, but C-VV is more suitable than C-HH to derive vegetation height (RMSEs of 48 and 56 cm respectively). An exponential relationship with in situ height was evident for all tested parameters (NDVI, TC, C-VV and C-HH) suggesting that the C-band SAR and multi-spectral approaches possess similar capabilities including tundra biomass retrieval. Errors might occur in specific settings as a result of high surface roughness, high photosynthetic activity in wetlands or high snow density. We therefore introduce a method for combined use of Sentinel-1 and Sentinel-2 to address the ambiguities related to Arctic wetlands and barren rockfields. Snow-related deviations occur within tundra fire scars in permafrost areas in the case of C-VV use. The impact decreases with age of the fire scar, following permafrost and vegetation recovery. The evaluation of masked C-VV retrievals across different regions, tundra types and sources (in situ and circumpolar vegetation community classification from satellite data) suggests pan-Arctic applicability to map current conditions for heights up to 160 cm. The presented methodology will allow for new applications and provide advanced insight into changing environmental conditions in the Arctic. • Use of frozen condition backscatter allows vegetation height retrieval in tundra. • C-band SAR shows similar capabilities like multi-spectral indices. • The Tasseled Cap Wetness Index is specifically applicable in northern tundra. • The evaluation across different regions suggests circumpolar applicability of C-VV. • Combination of Sentinel-1 and Sentinel-2 allows treatment of ambiguities. [ABSTRACT FROM AUTHOR]