Search

Auxetic metamaterials possess superior properties and have drawn extensive attention in the past decades. Herein, two curved ribs are added to the conventional re‐entrant (CRE) honeycomb structure to form a modified auxetic re‐entrant (MRE) honeycomb structure for improving the energy absorption capacity of the structure. In‐plane quasi‐static compression response of the honeycomb in large deformation is numerically explored first. Then, quasi‐static compression test is conducted to verify the validity of the numerical simulation. Both experimental and numerical simulation results reveal that during the quasi‐static compression process, two plateau stresses occur in the load–displacement curves of the structure, and the second plateau stress is much higher than the first one. The occurrence time of the second plateau stress can be controlled by the distance between the concave curved ribs in the structure. The experimental results are in good agreement with the finite element analysis results. Due to their desirable mechanical properties, the MRE honeycomb structures have great potential for applications in civil engineering, vehicle crashworthiness, and protective infrastructure. [ABSTRACT FROM AUTHOR]

Mechanical metamaterials represent a class of deformable systems, which exhibit macroscopic deformations, mechanical, and/or thermal properties. These emerge due to the structure of their subunits rather than their materials composition and typically exhibit anomalous (normally negative) macroscopic structural, mechanical, or thermal property/properties caused by a change in shape/size of the system. Herein, a class of honeycombs is discussed, which push to the extreme the classical definition of "mechanical metamaterials," exhibiting temperature‐tunable Poisson's ratio properties. More specifically, centrosymmetric honeycombs with T‐shaped joints constructed from different materials are shown to exhibit temperature‐dependent Poisson's ratio values, which can be either positive or negative (auxetic) depending on the external stimulus the system is subjected to. The sign and magnitudes of the Poisson's ratio values are explained in terms of particular geometries that these composite honeycomb systems attain at different temperature conditions. In particular, auxeticity is attributed to the transformation of the T‐shaped units to re‐entrant units. Practical aspects on how these properties may be achieved are discussed, including the possibility that the changes in shape, and hence Poisson's ratios, are induced via different extents of dryness on opposite surfaces of ligaments made from absorbent materials. [ABSTRACT FROM AUTHOR]

Honeycombs or foams with reentrant microstructures exhibit effective negative Poisson's ratio. Although they are light weight due to inherently empty space, their overall stiffness and damping are somewhat limited. With judiciously chosen filler material to fill the voids in star‐shaped honeycomb, it is numerically demonstrated its auxeticity may be enhanced. By combining the filler and skeleton, the hierarchical composite materials are constructed. The magnitude of the enhancement depends on inner and outer filler's modulus mismatch, as well as the types of filling. Filler's auxeticity also largely enhances overall auxeticity of the outer‐ and all‐filled honeycomb. In addition, for outer‐filled honeycomb, its effective viscoelastic modulus and damping are significantly increased, while maintaining relatively light weight, due to local stress concentration. [ABSTRACT FROM AUTHOR]

In the present work, two new designs of honeycomb structures were presented based on the basic re-entrant structure namely, splined-reentrant and stiffened-reentrant honeycombs. The new structures were designed in order to enhance the in-plane stiffness and maintaining the auxetic behavior of the structure. In this study, finite elements modeling and experimental work were carried out to evaluate the in-plane properties of the new designs. The effect of the geometrical parameters such as rib length and rib thickness of the unit cell of the new designs on the in-plane properties was investigated. Finite elements results showed that the in-plane stiffness of the new designs was improved significantly compared to the basic re-entrant structure. Also, the stiffened-reentrant structure showed better enhancement of the stiffness than the splined-reentrant structure. For example the modulus of elasticity of the stiffened-reentrant structure exceeds 16× that of the basic re-entrant structure in x-direction and was over two times in the y-direction with lower values of the negative Poisson's ratio. Compression tests were carried on honeycomb samples made of steel using laser cutting technique with different geometrical parameters. Test results for the three designs were compared with the finite element results and they were in a good agreement. [ABSTRACT FROM AUTHOR]